| Message ID | 20230519200520.10657-2-alex@shruggie.ro |
|---|---|
| State | New |
| Headers | show |
| Series | [1/2] backlight: gpio_backlight: add new property default-brightness-level | expand |
On Fri, May 19, 2023 at 11:05:20PM +0300, Alexandru Ardelean wrote: > From: Yannick Fertre <yannick.fertre@foss.st.com> > > Add documentation for new default-brightness-level property. > > Reviewed-by: Philippe CORNU <philippe.cornu@foss.st.com> > Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> > Signed-off-by: Alexandru Ardelean <alex@shruggie.ro> > --- > > Link to original patch: > https://github.com/STMicroelectronics/linux/commit/c4067d7bd883c6fa14ffd49892c4ce663cdafe98 > > .../bindings/leds/backlight/gpio-backlight.yaml | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml > index 584030b6b0b9..b96c08cff0f0 100644 > --- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml > +++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml > @@ -23,6 +23,15 @@ properties: > description: enable the backlight at boot. > type: boolean > > + default-brightness-level: > + description: > + The default brightness level (index into the array defined by the > + "brightness-levels" property). gpio-backlight does not have a brightness-levels array property! I think it is also necessary to improve the docs of both properties to distinguish between the meaning of default-on and default-brightness-level. The result of setting default-on and default-brightness level to zero is that the GPIO will be off (this is correct behaviour but hard to figure out from the current text). default-on is a control that can "enable" the backlight at boot when it is not linked to a display in the DT (e.g. it is mostly for legacy cases). When the backlight is linked to a display then the backlight enable state will be automatically linked to the display enable state instead. default-brightness-level is useful for handling displays that are still readable with the backlight off (e-ink, reflective/ transflexive LCD, etc), otherwise is should be absent or set to 1. > + $ref: /schemas/types.yaml#/definitions/uint32 > + > +dependencies: > + default-brightness-level: [ "brightness-levels" ] As above, depending on brightness-levels doesn't make any sense here. Daniel.
diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml index 584030b6b0b9..b96c08cff0f0 100644 --- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml @@ -23,6 +23,15 @@ properties: description: enable the backlight at boot. type: boolean + default-brightness-level: + description: + The default brightness level (index into the array defined by the + "brightness-levels" property). + $ref: /schemas/types.yaml#/definitions/uint32 + +dependencies: + default-brightness-level: [ "brightness-levels" ] + required: - compatible - gpios