| Message ID | d507ca1396776782802888e992fcae6ddb72e521.1684920389.git.quic_varada@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
On Wed, May 24, 2023 at 03:06:10PM +0530, Varadarajan Narayanan wrote: > IPQ9574 has a tsens v2.3.1 peripheral which monitors temperatures > around the various subsystems on the die. > > Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com> > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > [v2]: > Add "qcom,ipq8074-tsens" as fallback compatible > --- > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > index 0ab5556..15c9447 100644 > --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > @@ -958,6 +958,15 @@ > status = "disabled"; > }; > > + tsens: thermal-sensor@4a9000 { > + compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens"; > + reg = <0x4a9000 0x1000>, /* TM */ Please pad addresses to 8 digits, and sort nodes by address. Regards, Bjorn > + <0x4a8000 0x1000>; /* SROT */ > + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "combined"; > + #qcom,sensors = <16>; > + #thermal-sensor-cells = <1>; > + }; > }; > > timer { > -- > 2.7.4 >
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 0ab5556..15c9447 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -958,6 +958,15 @@ status = "disabled"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; + }; }; timer {