| Message ID | 20230525212712.255406-1-shreeya.patel@collabora.com |
|---|---|
| Headers | show |
| Series | RK3588 ADC support | expand |
On Fri, 26 May 2023 02:57:04 +0530 Shreeya Patel <shreeya.patel@collabora.com> wrote: > This patch series adds ADC support for RK3588 and updates > the DT bindings for the same. > > To test ADC support on Rock 5B board, a voltage divider circuit > was created using the gpio pin 22 ( SARADC_IN4 ) and few more > tests were ran for testing the buffer and trigger support using > the iio_generic_buffer tool. > FWIW I don't have any additional comments on this beyond agreeing those made by others need addressing. Fingers crossed for v3. Jonathan > > Changes in v2 > - Add from address in patches 1 and 2. > - Create separate patches for adding new device support and changes to > the old device code. > - Make use of FIELD_PREP in patch 2. > - Move the enablement of clocks at it's original position in patch 3 > - Add Reviewed-by tag in patches 4 and 5. > - Add an Acked-by tag in patch 8. > > Shreeya Patel (8): > iio: adc: rockchip_saradc: Add callback functions > iio: adc: rockchip_saradc: Add support for RK3588 > iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled > iio: adc: rockchip_saradc: Use of_device_get_match_data > iio: adc: rockchip_saradc: Match alignment with open parenthesis > iio: adc: rockchip_saradc: Use dev_err_probe > arm64: dts: rockchip: Add DT node for ADC support in RK3588 > dt-bindings: iio: adc: Add rockchip,rk3588-saradc string > > .../bindings/iio/adc/rockchip-saradc.yaml | 1 + > arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 12 + > drivers/iio/adc/rockchip_saradc.c | 262 +++++++++++------- > 3 files changed, 168 insertions(+), 107 deletions(-) >
This patch series adds ADC support for RK3588 and updates the DT bindings for the same. To test ADC support on Rock 5B board, a voltage divider circuit was created using the gpio pin 22 ( SARADC_IN4 ) and few more tests were ran for testing the buffer and trigger support using the iio_generic_buffer tool. Changes in v2 - Add from address in patches 1 and 2. - Create separate patches for adding new device support and changes to the old device code. - Make use of FIELD_PREP in patch 2. - Move the enablement of clocks at it's original position in patch 3 - Add Reviewed-by tag in patches 4 and 5. - Add an Acked-by tag in patch 8. Shreeya Patel (8): iio: adc: rockchip_saradc: Add callback functions iio: adc: rockchip_saradc: Add support for RK3588 iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled iio: adc: rockchip_saradc: Use of_device_get_match_data iio: adc: rockchip_saradc: Match alignment with open parenthesis iio: adc: rockchip_saradc: Use dev_err_probe arm64: dts: rockchip: Add DT node for ADC support in RK3588 dt-bindings: iio: adc: Add rockchip,rk3588-saradc string .../bindings/iio/adc/rockchip-saradc.yaml | 1 + arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 12 + drivers/iio/adc/rockchip_saradc.c | 262 +++++++++++------- 3 files changed, 168 insertions(+), 107 deletions(-)