Message ID | 20230518215447.180298-1-festevam@gmail.com |
---|---|
State | Superseded |
Headers | show |
Series | [1/2] ARM: dts: imx7d-sdb: Describe the SD card regulator | expand |
On Thu, May 18, 2023 at 06:54:46PM -0300, Fabio Estevam wrote: > From: Fabio Estevam <festevam@denx.de> > > Improve the devicetree description by adding the SD card regulator > that is controlled via GPIO5_2. > > Signed-off-by: Fabio Estevam <festevam@denx.de> > --- > arch/arm/boot/dts/imx7d-sdb.dts | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts > index 25681c430393..6e45f1154611 100644 > --- a/arch/arm/boot/dts/imx7d-sdb.dts > +++ b/arch/arm/boot/dts/imx7d-sdb.dts > @@ -60,6 +60,17 @@ extended_io: gpio-expander@0 { > }; > }; > > + reg_sd1_vmmc: regulator-sd1-vmmc { > + compatible = "regulator-fixed"; > + regulator-name = "VDD_SD1"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; > + startup-delay-us = <200000>; > + off-on-delay-us = <20000>; > + enable-active-high; Can we put this right after 'gpio'? Shawn > + }; > + > reg_usb_otg1_vbus: regulator-usb-otg1-vbus { > compatible = "regulator-fixed"; > regulator-name = "usb_otg1_vbus"; > @@ -477,6 +488,7 @@ &usdhc1 { > pinctrl-0 = <&pinctrl_usdhc1>; > cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; > wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; > + vmmc-supply = <®_sd1_vmmc>; > wakeup-source; > keep-power-in-suspend; > status = "okay"; > -- > 2.34.1 >
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 25681c430393..6e45f1154611 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -60,6 +60,17 @@ extended_io: gpio-expander@0 { }; }; + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VDD_SD1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + startup-delay-us = <200000>; + off-on-delay-us = <20000>; + enable-active-high; + }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; @@ -477,6 +488,7 @@ &usdhc1 { pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_sd1_vmmc>; wakeup-source; keep-power-in-suspend; status = "okay";