| Message ID | 20230603185340.13838-1-shreeya.patel@collabora.com |
|---|---|
| Headers | show |
| Series | RK3588 ADC support | expand |
Sun, Jun 04, 2023 at 12:23:32AM +0530, Shreeya Patel kirjoitti: > This patch series adds ADC support for RK3588 and updates > the DT bindings for the same. > > To test ADC support on Rock 5B board, a voltage divider circuit > was created using the gpio pin 22 ( SARADC_IN4 ) and few more > tests were ran for testing the buffer and trigger support using > the iio_generic_buffer tool. Well done! For patches 1-6 Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> (with one nit-pick to be addressed) > Changes in v3 > - Add bitfield.h header file in patch 2. > - Add a Reviewed-by tag in patch 2. > - Do not remove clock enabling and disabling from the suspend and > resume functions respectively in patch 3 > > Changes in v2 > - Add from address in patches 1 and 2. > - Create separate patches for adding new device support and changes to > the old device code. > - Make use of FIELD_PREP in patch 2. > - Move the enablement of clocks at it's original position in patch 3 > - Add Reviewed-by tag in patches 4 and 5. > - Add an Acked-by tag in patch 8. > > Shreeya Patel (8): > iio: adc: rockchip_saradc: Add callback functions > iio: adc: rockchip_saradc: Add support for RK3588 > iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled > iio: adc: rockchip_saradc: Use of_device_get_match_data > iio: adc: rockchip_saradc: Match alignment with open parenthesis > iio: adc: rockchip_saradc: Use dev_err_probe > arm64: dts: rockchip: Add DT node for ADC support in RK3588 > dt-bindings: iio: adc: Add rockchip,rk3588-saradc string > > .../bindings/iio/adc/rockchip-saradc.yaml | 1 + > arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 12 + > drivers/iio/adc/rockchip_saradc.c | 246 +++++++++++------- > 3 files changed, 168 insertions(+), 91 deletions(-) > > -- > 2.30.2 >
On Sat, 3 Jun 2023 23:50:09 +0300 andy.shevchenko@gmail.com wrote: > Sun, Jun 04, 2023 at 12:23:32AM +0530, Shreeya Patel kirjoitti: > > This patch series adds ADC support for RK3588 and updates > > the DT bindings for the same. > > > > To test ADC support on Rock 5B board, a voltage divider circuit > > was created using the gpio pin 22 ( SARADC_IN4 ) and few more > > tests were ran for testing the buffer and trigger support using > > the iio_generic_buffer tool. > > Well done! > > For patches 1-6 > Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> > (with one nit-pick to be addressed) Addressed the nit whilst applying and picked up 1-6,8. Applied them to the togreg branch of iio.git, but initially I'll just push that out as testing for 0-day to take a look and see what we missed. As normal 7 should go via appropriate SoC tree > > > Changes in v3 > > - Add bitfield.h header file in patch 2. > > - Add a Reviewed-by tag in patch 2. > > - Do not remove clock enabling and disabling from the suspend and > > resume functions respectively in patch 3 > > > > Changes in v2 > > - Add from address in patches 1 and 2. > > - Create separate patches for adding new device support and changes to > > the old device code. > > - Make use of FIELD_PREP in patch 2. > > - Move the enablement of clocks at it's original position in patch 3 > > - Add Reviewed-by tag in patches 4 and 5. > > - Add an Acked-by tag in patch 8. > > > > Shreeya Patel (8): > > iio: adc: rockchip_saradc: Add callback functions > > iio: adc: rockchip_saradc: Add support for RK3588 > > iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled > > iio: adc: rockchip_saradc: Use of_device_get_match_data > > iio: adc: rockchip_saradc: Match alignment with open parenthesis > > iio: adc: rockchip_saradc: Use dev_err_probe > > arm64: dts: rockchip: Add DT node for ADC support in RK3588 > > dt-bindings: iio: adc: Add rockchip,rk3588-saradc string > > > > .../bindings/iio/adc/rockchip-saradc.yaml | 1 + > > arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 12 + > > drivers/iio/adc/rockchip_saradc.c | 246 +++++++++++------- > > 3 files changed, 168 insertions(+), 91 deletions(-) > > > > -- > > 2.30.2 > > >
This patch series adds ADC support for RK3588 and updates the DT bindings for the same. To test ADC support on Rock 5B board, a voltage divider circuit was created using the gpio pin 22 ( SARADC_IN4 ) and few more tests were ran for testing the buffer and trigger support using the iio_generic_buffer tool. Changes in v3 - Add bitfield.h header file in patch 2. - Add a Reviewed-by tag in patch 2. - Do not remove clock enabling and disabling from the suspend and resume functions respectively in patch 3 Changes in v2 - Add from address in patches 1 and 2. - Create separate patches for adding new device support and changes to the old device code. - Make use of FIELD_PREP in patch 2. - Move the enablement of clocks at it's original position in patch 3 - Add Reviewed-by tag in patches 4 and 5. - Add an Acked-by tag in patch 8. Shreeya Patel (8): iio: adc: rockchip_saradc: Add callback functions iio: adc: rockchip_saradc: Add support for RK3588 iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled iio: adc: rockchip_saradc: Use of_device_get_match_data iio: adc: rockchip_saradc: Match alignment with open parenthesis iio: adc: rockchip_saradc: Use dev_err_probe arm64: dts: rockchip: Add DT node for ADC support in RK3588 dt-bindings: iio: adc: Add rockchip,rk3588-saradc string .../bindings/iio/adc/rockchip-saradc.yaml | 1 + arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 12 + drivers/iio/adc/rockchip_saradc.c | 246 +++++++++++------- 3 files changed, 168 insertions(+), 91 deletions(-)