mbox series

[0/4] bluetooth: qca: enable WCN7850 support

Message ID 20230620-topic-sm8550-upstream-bt-v1-0-4728564f8872@linaro.org
Headers show
Series bluetooth: qca: enable WCN7850 support | expand

Message

Neil Armstrong June 20, 2023, 3:19 p.m. UTC
This serie enables WCN7850 on the Qualcomm SM8550 QRD
reference platform.

The WCN7850 is close to the WCN6855 but uses different
firmware names.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Neil Armstrong (4):
      dt-bindings: net: bluetooth: qualcomm: document WCN7850 chipset
      bluetooth: qca: add support for WCN7850
      arm64: dts: qcom: sm8550: add UART14 nodes
      arm64: dts: qcom: sm8550-qrd: add bluetooth support

 .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 23 +++++++++++
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts            | 43 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8550.dtsi               | 30 ++++++++++++++
 drivers/bluetooth/btqca.c                          |  7 ++++
 drivers/bluetooth/btqca.h                          | 10 +++++
 drivers/bluetooth/hci_qca.c                        | 48 +++++++++++++++++-----
 6 files changed, 150 insertions(+), 11 deletions(-)
---
base-commit: 9dbf40840551df336c95ce2a3adbdd25ed53c0ef
change-id: 20230620-topic-sm8550-upstream-bt-dfc4305f9c14

Best regards,

Comments

Konrad Dybcio June 20, 2023, 3:43 p.m. UTC | #1
On 20.06.2023 17:19, Neil Armstrong wrote:
> Add support for the WCN7850 Bluetooth chipset.
> 
> Tested on the SM8550 QRD platform.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
I don't have comments for this patch specifically, but:


>  drivers/bluetooth/btqca.c   |  7 +++++++
>  drivers/bluetooth/btqca.h   | 10 ++++++++++
>  drivers/bluetooth/hci_qca.c | 48 ++++++++++++++++++++++++++++++++++-----------
>  3 files changed, 54 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index e7e58a956d15..037146b476ff 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -617,6 +617,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>  	} else if (soc_type == QCA_WCN6855) {
>  		snprintf(config.fwname, sizeof(config.fwname),
>  			 "qca/hpbtfw%02x.tlv", rom_ver);
> +	} else if (soc_type == QCA_WCN7850) {
> +		snprintf(config.fwname, sizeof(config.fwname),
> +			 "qca/hmtbtfw%02x.tlv", rom_ver);
>  	} else {
>  		snprintf(config.fwname, sizeof(config.fwname),
>  			 "qca/rampatch_%08x.bin", soc_ver);
> @@ -654,6 +657,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>  	else if (soc_type == QCA_WCN6855)
>  		snprintf(config.fwname, sizeof(config.fwname),
>  			 "qca/hpnv%02x.bin", rom_ver);
> +	else if (soc_type == QCA_WCN7850)
> +		snprintf(config.fwname, sizeof(config.fwname),
> +			 "qca/hmtnv%02x.bin", rom_ver);
>  	else
>  		snprintf(config.fwname, sizeof(config.fwname),
>  			 "qca/nvm_%08x.bin", soc_ver);
The above changes should probably be made switch statements as well

> @@ -695,6 +701,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>  	case QCA_WCN3991:
>  	case QCA_WCN6750:
>  	case QCA_WCN6855:
> +	case QCA_WCN7850:
>  		/* get fw build info */
>  		err = qca_read_fw_build_info(hdev);
>  		if (err < 0)
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index b884095bcd9d..ff1850e984fe 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -148,6 +148,7 @@ enum qca_btsoc_type {
>  	QCA_QCA6390,
>  	QCA_WCN6750,
>  	QCA_WCN6855,
> +	QCA_WCN7850,
>  };
>  
>  #if IS_ENABLED(CONFIG_BT_QCA)
> @@ -173,6 +174,10 @@ static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
>  {
>  	return soc_type == QCA_WCN6855;
>  }
> +static inline bool qca_is_wcn7850(enum qca_btsoc_type soc_type)
> +{
> +	return soc_type == QCA_WCN7850;
> +}
>  
>  #else
>  
> @@ -216,6 +221,11 @@ static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
>  	return false;
>  }
>  
> +static inline bool qca_is_wcn7850(enum qca_btsoc_type soc_type)
> +{
> +	return false;
> +}
> +
>  static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
>  {
>  	return -EOPNOTSUPP;
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index e30c979535b1..49b8d75d271e 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1322,7 +1322,8 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
>  	/* Give the controller time to process the request */
>  	if (qca_is_wcn399x(qca_soc_type(hu)) ||
>  	    qca_is_wcn6750(qca_soc_type(hu)) ||
> -	    qca_is_wcn6855(qca_soc_type(hu)))
> +	    qca_is_wcn6855(qca_soc_type(hu)) ||
> +	    qca_is_wcn7850(qca_soc_type(hu)))
>  		usleep_range(1000, 10000);
Separate topic, but I see usages of the helper and raw comparisons
everywhere.. I'd vote for switch everywhere

Konrad
>  	else
>  		msleep(300);
> @@ -1400,7 +1401,8 @@ static int qca_check_speeds(struct hci_uart *hu)
>  {
>  	if (qca_is_wcn399x(qca_soc_type(hu)) ||
>  	    qca_is_wcn6750(qca_soc_type(hu)) ||
> -	    qca_is_wcn6855(qca_soc_type(hu))) {
> +	    qca_is_wcn6855(qca_soc_type(hu)) ||
> +	    qca_is_wcn7850(qca_soc_type(hu))) {
>  		if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
>  		    !qca_get_speed(hu, QCA_OPER_SPEED))
>  			return -EINVAL;
> @@ -1435,7 +1437,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
>  		 */
>  		if (qca_is_wcn399x(soc_type) ||
>  		    qca_is_wcn6750(soc_type) ||
> -		    qca_is_wcn6855(soc_type))
> +		    qca_is_wcn6855(soc_type) ||
> +		    qca_is_wcn7850(soc_type))
>  			hci_uart_set_flow_control(hu, true);
>  
>  		if (soc_type == QCA_WCN3990) {
> @@ -1454,7 +1457,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
>  error:
>  		if (qca_is_wcn399x(soc_type) ||
>  		    qca_is_wcn6750(soc_type) ||
> -		    qca_is_wcn6855(soc_type))
> +		    qca_is_wcn6855(soc_type) ||
> +		    qca_is_wcn7850(soc_type))
>  			hci_uart_set_flow_control(hu, false);
>  
>  		if (soc_type == QCA_WCN3990) {
> @@ -1691,7 +1695,8 @@ static int qca_power_on(struct hci_dev *hdev)
>  
>  	if (qca_is_wcn399x(soc_type) ||
>  	    qca_is_wcn6750(soc_type) ||
> -	    qca_is_wcn6855(soc_type)) {
> +	    qca_is_wcn6855(soc_type) ||
> +	    qca_is_wcn7850(soc_type)) {
>  		ret = qca_regulator_init(hu);
>  	} else {
>  		qcadev = serdev_device_get_drvdata(hu->serdev);
> @@ -1733,7 +1738,8 @@ static int qca_setup(struct hci_uart *hu)
>  	bt_dev_info(hdev, "setting up %s",
>  		qca_is_wcn399x(soc_type) ? "wcn399x" :
>  		(soc_type == QCA_WCN6750) ? "wcn6750" :
> -		(soc_type == QCA_WCN6855) ? "wcn6855" : "ROME/QCA6390");
> +		(soc_type == QCA_WCN6855) ? "wcn6855" :
> +		(soc_type == QCA_WCN7850) ? "wcn7850" : "ROME/QCA6390");
>  
>  	qca->memdump_state = QCA_MEMDUMP_IDLE;
>  
> @@ -1746,7 +1752,8 @@ static int qca_setup(struct hci_uart *hu)
>  
>  	if (qca_is_wcn399x(soc_type) ||
>  	    qca_is_wcn6750(soc_type) ||
> -	    qca_is_wcn6855(soc_type)) {
> +	    qca_is_wcn6855(soc_type) ||
> +	    qca_is_wcn7850(soc_type)) {
>  		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
>  		hci_set_aosp_capable(hdev);
>  
> @@ -1769,7 +1776,8 @@ static int qca_setup(struct hci_uart *hu)
>  
>  	if (!(qca_is_wcn399x(soc_type) ||
>  	      qca_is_wcn6750(soc_type) ||
> -	      qca_is_wcn6855(soc_type))) {
> +	      qca_is_wcn6855(soc_type) ||
> +	      qca_is_wcn7850(soc_type))) {
>  		/* Get QCA version information */
>  		ret = qca_read_soc_version(hdev, &ver, soc_type);
>  		if (ret)
> @@ -1909,6 +1917,20 @@ static const struct qca_device_data qca_soc_data_wcn6855 __maybe_unused = {
>  	.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
>  };
>  
> +static const struct qca_device_data qca_soc_data_wcn7850 __maybe_unused = {
> +	.soc_type = QCA_WCN7850,
> +	.vregs = (struct qca_vreg []) {
> +		{ "vddio", 5000 },
> +		{ "vddaon", 26000 },
> +		{ "vdddig", 126000 },
> +		{ "vddrfa0p8", 102000 },
> +		{ "vddrfa1p2", 257000 },
> +		{ "vddrfa1p9", 302000 },
> +	},
> +	.num_vregs = 6,
> +	.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
> +};
> +
>  static void qca_power_shutdown(struct hci_uart *hu)
>  {
>  	struct qca_serdev *qcadev;
> @@ -2074,7 +2096,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
>  	if (data &&
>  	    (qca_is_wcn399x(data->soc_type) ||
>  	     qca_is_wcn6750(data->soc_type) ||
> -	     qca_is_wcn6855(data->soc_type))) {
> +	     qca_is_wcn6855(data->soc_type) ||
> +	     qca_is_wcn7850(data->soc_type))) {
>  		qcadev->btsoc_type = data->soc_type;
>  		qcadev->bt_power = devm_kzalloc(&serdev->dev,
>  						sizeof(struct qca_power),
> @@ -2105,7 +2128,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
>  					       GPIOD_IN);
>  		if (IS_ERR_OR_NULL(qcadev->sw_ctrl) &&
>  		    (data->soc_type == QCA_WCN6750 ||
> -		     data->soc_type == QCA_WCN6855))
> +		     data->soc_type == QCA_WCN6855 ||
> +		     data->soc_type == QCA_WCN7850))
>  			dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
>  
>  		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
> @@ -2182,7 +2206,8 @@ static void qca_serdev_remove(struct serdev_device *serdev)
>  
>  	if ((qca_is_wcn399x(qcadev->btsoc_type) ||
>  	     qca_is_wcn6750(qcadev->btsoc_type) ||
> -	     qca_is_wcn6855(qcadev->btsoc_type)) &&
> +	     qca_is_wcn6855(qcadev->btsoc_type) ||
> +	     qca_is_wcn7850(qcadev->btsoc_type)) &&
>  	    power->vregs_on)
>  		qca_power_shutdown(&qcadev->serdev_hu);
>  	else if (qcadev->susclk)
> @@ -2368,6 +2393,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
>  	{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
>  	{ .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
>  	{ .compatible = "qcom,wcn6855-bt", .data = &qca_soc_data_wcn6855},
> +	{ .compatible = "qcom,wcn7850-bt", .data = &qca_soc_data_wcn7850},
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
>
Luiz Augusto von Dentz June 22, 2023, 7:54 p.m. UTC | #2
Hi Neil

On Tue, Jun 20, 2023 at 8:43 AM Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
> On 20.06.2023 17:19, Neil Armstrong wrote:
> > Add support for the WCN7850 Bluetooth chipset.
> >
> > Tested on the SM8550 QRD platform.
> >
> > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> > ---
> I don't have comments for this patch specifically, but:
>
>
> >  drivers/bluetooth/btqca.c   |  7 +++++++
> >  drivers/bluetooth/btqca.h   | 10 ++++++++++
> >  drivers/bluetooth/hci_qca.c | 48 ++++++++++++++++++++++++++++++++++-----------
> >  3 files changed, 54 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> > index e7e58a956d15..037146b476ff 100644
> > --- a/drivers/bluetooth/btqca.c
> > +++ b/drivers/bluetooth/btqca.c
> > @@ -617,6 +617,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> >       } else if (soc_type == QCA_WCN6855) {
> >               snprintf(config.fwname, sizeof(config.fwname),
> >                        "qca/hpbtfw%02x.tlv", rom_ver);
> > +     } else if (soc_type == QCA_WCN7850) {
> > +             snprintf(config.fwname, sizeof(config.fwname),
> > +                      "qca/hmtbtfw%02x.tlv", rom_ver);
> >       } else {
> >               snprintf(config.fwname, sizeof(config.fwname),
> >                        "qca/rampatch_%08x.bin", soc_ver);
> > @@ -654,6 +657,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> >       else if (soc_type == QCA_WCN6855)
> >               snprintf(config.fwname, sizeof(config.fwname),
> >                        "qca/hpnv%02x.bin", rom_ver);
> > +     else if (soc_type == QCA_WCN7850)
> > +             snprintf(config.fwname, sizeof(config.fwname),
> > +                      "qca/hmtnv%02x.bin", rom_ver);
> >       else
> >               snprintf(config.fwname, sizeof(config.fwname),
> >                        "qca/nvm_%08x.bin", soc_ver);
> The above changes should probably be made switch statements as well
>
> > @@ -695,6 +701,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> >       case QCA_WCN3991:
> >       case QCA_WCN6750:
> >       case QCA_WCN6855:
> > +     case QCA_WCN7850:
> >               /* get fw build info */
> >               err = qca_read_fw_build_info(hdev);
> >               if (err < 0)
> > diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> > index b884095bcd9d..ff1850e984fe 100644
> > --- a/drivers/bluetooth/btqca.h
> > +++ b/drivers/bluetooth/btqca.h
> > @@ -148,6 +148,7 @@ enum qca_btsoc_type {
> >       QCA_QCA6390,
> >       QCA_WCN6750,
> >       QCA_WCN6855,
> > +     QCA_WCN7850,
> >  };
> >
> >  #if IS_ENABLED(CONFIG_BT_QCA)
> > @@ -173,6 +174,10 @@ static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
> >  {
> >       return soc_type == QCA_WCN6855;
> >  }
> > +static inline bool qca_is_wcn7850(enum qca_btsoc_type soc_type)
> > +{
> > +     return soc_type == QCA_WCN7850;
> > +}
> >
> >  #else
> >
> > @@ -216,6 +221,11 @@ static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
> >       return false;
> >  }
> >
> > +static inline bool qca_is_wcn7850(enum qca_btsoc_type soc_type)
> > +{
> > +     return false;
> > +}
> > +
> >  static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
> >  {
> >       return -EOPNOTSUPP;
> > diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> > index e30c979535b1..49b8d75d271e 100644
> > --- a/drivers/bluetooth/hci_qca.c
> > +++ b/drivers/bluetooth/hci_qca.c
> > @@ -1322,7 +1322,8 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
> >       /* Give the controller time to process the request */
> >       if (qca_is_wcn399x(qca_soc_type(hu)) ||
> >           qca_is_wcn6750(qca_soc_type(hu)) ||
> > -         qca_is_wcn6855(qca_soc_type(hu)))
> > +         qca_is_wcn6855(qca_soc_type(hu)) ||
> > +         qca_is_wcn7850(qca_soc_type(hu)))
> >               usleep_range(1000, 10000);
> Separate topic, but I see usages of the helper and raw comparisons
> everywhere.. I'd vote for switch everywhere

+1, most of the time it is preferable to go with switches which makes
the code cleaner/more readable, Im fine not requiring it in this set
but I hope someone looks into doing some cleanup in this code.

> Konrad
> >       else
> >               msleep(300);
> > @@ -1400,7 +1401,8 @@ static int qca_check_speeds(struct hci_uart *hu)
> >  {
> >       if (qca_is_wcn399x(qca_soc_type(hu)) ||
> >           qca_is_wcn6750(qca_soc_type(hu)) ||
> > -         qca_is_wcn6855(qca_soc_type(hu))) {
> > +         qca_is_wcn6855(qca_soc_type(hu)) ||
> > +         qca_is_wcn7850(qca_soc_type(hu))) {
> >               if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
> >                   !qca_get_speed(hu, QCA_OPER_SPEED))
> >                       return -EINVAL;
> > @@ -1435,7 +1437,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
> >                */
> >               if (qca_is_wcn399x(soc_type) ||
> >                   qca_is_wcn6750(soc_type) ||
> > -                 qca_is_wcn6855(soc_type))
> > +                 qca_is_wcn6855(soc_type) ||
> > +                 qca_is_wcn7850(soc_type))
> >                       hci_uart_set_flow_control(hu, true);
> >
> >               if (soc_type == QCA_WCN3990) {
> > @@ -1454,7 +1457,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
> >  error:
> >               if (qca_is_wcn399x(soc_type) ||
> >                   qca_is_wcn6750(soc_type) ||
> > -                 qca_is_wcn6855(soc_type))
> > +                 qca_is_wcn6855(soc_type) ||
> > +                 qca_is_wcn7850(soc_type))
> >                       hci_uart_set_flow_control(hu, false);
> >
> >               if (soc_type == QCA_WCN3990) {
> > @@ -1691,7 +1695,8 @@ static int qca_power_on(struct hci_dev *hdev)
> >
> >       if (qca_is_wcn399x(soc_type) ||
> >           qca_is_wcn6750(soc_type) ||
> > -         qca_is_wcn6855(soc_type)) {
> > +         qca_is_wcn6855(soc_type) ||
> > +         qca_is_wcn7850(soc_type)) {
> >               ret = qca_regulator_init(hu);
> >       } else {
> >               qcadev = serdev_device_get_drvdata(hu->serdev);
> > @@ -1733,7 +1738,8 @@ static int qca_setup(struct hci_uart *hu)
> >       bt_dev_info(hdev, "setting up %s",
> >               qca_is_wcn399x(soc_type) ? "wcn399x" :
> >               (soc_type == QCA_WCN6750) ? "wcn6750" :
> > -             (soc_type == QCA_WCN6855) ? "wcn6855" : "ROME/QCA6390");
> > +             (soc_type == QCA_WCN6855) ? "wcn6855" :
> > +             (soc_type == QCA_WCN7850) ? "wcn7850" : "ROME/QCA6390");
> >
> >       qca->memdump_state = QCA_MEMDUMP_IDLE;
> >
> > @@ -1746,7 +1752,8 @@ static int qca_setup(struct hci_uart *hu)
> >
> >       if (qca_is_wcn399x(soc_type) ||
> >           qca_is_wcn6750(soc_type) ||
> > -         qca_is_wcn6855(soc_type)) {
> > +         qca_is_wcn6855(soc_type) ||
> > +         qca_is_wcn7850(soc_type)) {
> >               set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
> >               hci_set_aosp_capable(hdev);
> >
> > @@ -1769,7 +1776,8 @@ static int qca_setup(struct hci_uart *hu)
> >
> >       if (!(qca_is_wcn399x(soc_type) ||
> >             qca_is_wcn6750(soc_type) ||
> > -           qca_is_wcn6855(soc_type))) {
> > +           qca_is_wcn6855(soc_type) ||
> > +           qca_is_wcn7850(soc_type))) {
> >               /* Get QCA version information */
> >               ret = qca_read_soc_version(hdev, &ver, soc_type);
> >               if (ret)
> > @@ -1909,6 +1917,20 @@ static const struct qca_device_data qca_soc_data_wcn6855 __maybe_unused = {
> >       .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
> >  };
> >
> > +static const struct qca_device_data qca_soc_data_wcn7850 __maybe_unused = {
> > +     .soc_type = QCA_WCN7850,
> > +     .vregs = (struct qca_vreg []) {
> > +             { "vddio", 5000 },
> > +             { "vddaon", 26000 },
> > +             { "vdddig", 126000 },
> > +             { "vddrfa0p8", 102000 },
> > +             { "vddrfa1p2", 257000 },
> > +             { "vddrfa1p9", 302000 },
> > +     },
> > +     .num_vregs = 6,
> > +     .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
> > +};
> > +
> >  static void qca_power_shutdown(struct hci_uart *hu)
> >  {
> >       struct qca_serdev *qcadev;
> > @@ -2074,7 +2096,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
> >       if (data &&
> >           (qca_is_wcn399x(data->soc_type) ||
> >            qca_is_wcn6750(data->soc_type) ||
> > -          qca_is_wcn6855(data->soc_type))) {
> > +          qca_is_wcn6855(data->soc_type) ||
> > +          qca_is_wcn7850(data->soc_type))) {
> >               qcadev->btsoc_type = data->soc_type;
> >               qcadev->bt_power = devm_kzalloc(&serdev->dev,
> >                                               sizeof(struct qca_power),
> > @@ -2105,7 +2128,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
> >                                              GPIOD_IN);
> >               if (IS_ERR_OR_NULL(qcadev->sw_ctrl) &&
> >                   (data->soc_type == QCA_WCN6750 ||
> > -                  data->soc_type == QCA_WCN6855))
> > +                  data->soc_type == QCA_WCN6855 ||
> > +                  data->soc_type == QCA_WCN7850))
> >                       dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
> >
> >               qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
> > @@ -2182,7 +2206,8 @@ static void qca_serdev_remove(struct serdev_device *serdev)
> >
> >       if ((qca_is_wcn399x(qcadev->btsoc_type) ||
> >            qca_is_wcn6750(qcadev->btsoc_type) ||
> > -          qca_is_wcn6855(qcadev->btsoc_type)) &&
> > +          qca_is_wcn6855(qcadev->btsoc_type) ||
> > +          qca_is_wcn7850(qcadev->btsoc_type)) &&
> >           power->vregs_on)
> >               qca_power_shutdown(&qcadev->serdev_hu);
> >       else if (qcadev->susclk)
> > @@ -2368,6 +2393,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
> >       { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
> >       { .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
> >       { .compatible = "qcom,wcn6855-bt", .data = &qca_soc_data_wcn6855},
> > +     { .compatible = "qcom,wcn7850-bt", .data = &qca_soc_data_wcn7850},
> >       { /* sentinel */ }
> >  };
> >  MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
> >
Neil Armstrong June 23, 2023, 12:52 p.m. UTC | #3
Hi Luiz,

On 22/06/2023 21:54, Luiz Augusto von Dentz wrote:
> Hi Neil
> 
> On Tue, Jun 20, 2023 at 8:43 AM Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>>
>> On 20.06.2023 17:19, Neil Armstrong wrote:
>>> Add support for the WCN7850 Bluetooth chipset.
>>>
>>> Tested on the SM8550 QRD platform.
>>>
>>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>>> ---
>> I don't have comments for this patch specifically, but:
>>
>>
>>>   drivers/bluetooth/btqca.c   |  7 +++++++
>>>   drivers/bluetooth/btqca.h   | 10 ++++++++++
>>>   drivers/bluetooth/hci_qca.c | 48 ++++++++++++++++++++++++++++++++++-----------
>>>   3 files changed, 54 insertions(+), 11 deletions(-)
>>>
>>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>>> index e7e58a956d15..037146b476ff 100644
>>> --- a/drivers/bluetooth/btqca.c
>>> +++ b/drivers/bluetooth/btqca.c
>>> @@ -617,6 +617,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>>>        } else if (soc_type == QCA_WCN6855) {
>>>                snprintf(config.fwname, sizeof(config.fwname),
>>>                         "qca/hpbtfw%02x.tlv", rom_ver);
>>> +     } else if (soc_type == QCA_WCN7850) {
>>> +             snprintf(config.fwname, sizeof(config.fwname),
>>> +                      "qca/hmtbtfw%02x.tlv", rom_ver);
>>>        } else {
>>>                snprintf(config.fwname, sizeof(config.fwname),
>>>                         "qca/rampatch_%08x.bin", soc_ver);
>>> @@ -654,6 +657,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>>>        else if (soc_type == QCA_WCN6855)
>>>                snprintf(config.fwname, sizeof(config.fwname),
>>>                         "qca/hpnv%02x.bin", rom_ver);
>>> +     else if (soc_type == QCA_WCN7850)
>>> +             snprintf(config.fwname, sizeof(config.fwname),
>>> +                      "qca/hmtnv%02x.bin", rom_ver);
>>>        else
>>>                snprintf(config.fwname, sizeof(config.fwname),
>>>                         "qca/nvm_%08x.bin", soc_ver);
>> The above changes should probably be made switch statements as well
>>
>>> @@ -695,6 +701,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>>>        case QCA_WCN3991:
>>>        case QCA_WCN6750:
>>>        case QCA_WCN6855:
>>> +     case QCA_WCN7850:
>>>                /* get fw build info */
>>>                err = qca_read_fw_build_info(hdev);
>>>                if (err < 0)
>>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>>> index b884095bcd9d..ff1850e984fe 100644
>>> --- a/drivers/bluetooth/btqca.h
>>> +++ b/drivers/bluetooth/btqca.h
>>> @@ -148,6 +148,7 @@ enum qca_btsoc_type {
>>>        QCA_QCA6390,
>>>        QCA_WCN6750,
>>>        QCA_WCN6855,
>>> +     QCA_WCN7850,
>>>   };
>>>
>>>   #if IS_ENABLED(CONFIG_BT_QCA)
>>> @@ -173,6 +174,10 @@ static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
>>>   {
>>>        return soc_type == QCA_WCN6855;
>>>   }
>>> +static inline bool qca_is_wcn7850(enum qca_btsoc_type soc_type)
>>> +{
>>> +     return soc_type == QCA_WCN7850;
>>> +}
>>>
>>>   #else
>>>
>>> @@ -216,6 +221,11 @@ static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
>>>        return false;
>>>   }
>>>
>>> +static inline bool qca_is_wcn7850(enum qca_btsoc_type soc_type)
>>> +{
>>> +     return false;
>>> +}
>>> +
>>>   static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
>>>   {
>>>        return -EOPNOTSUPP;
>>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>>> index e30c979535b1..49b8d75d271e 100644
>>> --- a/drivers/bluetooth/hci_qca.c
>>> +++ b/drivers/bluetooth/hci_qca.c
>>> @@ -1322,7 +1322,8 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
>>>        /* Give the controller time to process the request */
>>>        if (qca_is_wcn399x(qca_soc_type(hu)) ||
>>>            qca_is_wcn6750(qca_soc_type(hu)) ||
>>> -         qca_is_wcn6855(qca_soc_type(hu)))
>>> +         qca_is_wcn6855(qca_soc_type(hu)) ||
>>> +         qca_is_wcn7850(qca_soc_type(hu)))
>>>                usleep_range(1000, 10000);
>> Separate topic, but I see usages of the helper and raw comparisons
>> everywhere.. I'd vote for switch everywhere
> 
> +1, most of the time it is preferable to go with switches which makes
> the code cleaner/more readable, Im fine not requiring it in this set
> but I hope someone looks into doing some cleanup in this code.

Since we have time until the end of the v6.5 merge window I'll add an intermediate
change adding switch/case for v2.

Thanks,
Neil

> 
>> Konrad
>>>        else
>>>                msleep(300);
>>> @@ -1400,7 +1401,8 @@ static int qca_check_speeds(struct hci_uart *hu)
>>>   {
>>>        if (qca_is_wcn399x(qca_soc_type(hu)) ||
>>>            qca_is_wcn6750(qca_soc_type(hu)) ||
>>> -         qca_is_wcn6855(qca_soc_type(hu))) {
>>> +         qca_is_wcn6855(qca_soc_type(hu)) ||
>>> +         qca_is_wcn7850(qca_soc_type(hu))) {
>>>                if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
>>>                    !qca_get_speed(hu, QCA_OPER_SPEED))
>>>                        return -EINVAL;
>>> @@ -1435,7 +1437,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
>>>                 */
>>>                if (qca_is_wcn399x(soc_type) ||
>>>                    qca_is_wcn6750(soc_type) ||
>>> -                 qca_is_wcn6855(soc_type))
>>> +                 qca_is_wcn6855(soc_type) ||
>>> +                 qca_is_wcn7850(soc_type))
>>>                        hci_uart_set_flow_control(hu, true);
>>>
>>>                if (soc_type == QCA_WCN3990) {
>>> @@ -1454,7 +1457,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
>>>   error:
>>>                if (qca_is_wcn399x(soc_type) ||
>>>                    qca_is_wcn6750(soc_type) ||
>>> -                 qca_is_wcn6855(soc_type))
>>> +                 qca_is_wcn6855(soc_type) ||
>>> +                 qca_is_wcn7850(soc_type))
>>>                        hci_uart_set_flow_control(hu, false);
>>>
>>>                if (soc_type == QCA_WCN3990) {
>>> @@ -1691,7 +1695,8 @@ static int qca_power_on(struct hci_dev *hdev)
>>>
>>>        if (qca_is_wcn399x(soc_type) ||
>>>            qca_is_wcn6750(soc_type) ||
>>> -         qca_is_wcn6855(soc_type)) {
>>> +         qca_is_wcn6855(soc_type) ||
>>> +         qca_is_wcn7850(soc_type)) {
>>>                ret = qca_regulator_init(hu);
>>>        } else {
>>>                qcadev = serdev_device_get_drvdata(hu->serdev);
>>> @@ -1733,7 +1738,8 @@ static int qca_setup(struct hci_uart *hu)
>>>        bt_dev_info(hdev, "setting up %s",
>>>                qca_is_wcn399x(soc_type) ? "wcn399x" :
>>>                (soc_type == QCA_WCN6750) ? "wcn6750" :
>>> -             (soc_type == QCA_WCN6855) ? "wcn6855" : "ROME/QCA6390");
>>> +             (soc_type == QCA_WCN6855) ? "wcn6855" :
>>> +             (soc_type == QCA_WCN7850) ? "wcn7850" : "ROME/QCA6390");
>>>
>>>        qca->memdump_state = QCA_MEMDUMP_IDLE;
>>>
>>> @@ -1746,7 +1752,8 @@ static int qca_setup(struct hci_uart *hu)
>>>
>>>        if (qca_is_wcn399x(soc_type) ||
>>>            qca_is_wcn6750(soc_type) ||
>>> -         qca_is_wcn6855(soc_type)) {
>>> +         qca_is_wcn6855(soc_type) ||
>>> +         qca_is_wcn7850(soc_type)) {
>>>                set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
>>>                hci_set_aosp_capable(hdev);
>>>
>>> @@ -1769,7 +1776,8 @@ static int qca_setup(struct hci_uart *hu)
>>>
>>>        if (!(qca_is_wcn399x(soc_type) ||
>>>              qca_is_wcn6750(soc_type) ||
>>> -           qca_is_wcn6855(soc_type))) {
>>> +           qca_is_wcn6855(soc_type) ||
>>> +           qca_is_wcn7850(soc_type))) {
>>>                /* Get QCA version information */
>>>                ret = qca_read_soc_version(hdev, &ver, soc_type);
>>>                if (ret)
>>> @@ -1909,6 +1917,20 @@ static const struct qca_device_data qca_soc_data_wcn6855 __maybe_unused = {
>>>        .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
>>>   };
>>>
>>> +static const struct qca_device_data qca_soc_data_wcn7850 __maybe_unused = {
>>> +     .soc_type = QCA_WCN7850,
>>> +     .vregs = (struct qca_vreg []) {
>>> +             { "vddio", 5000 },
>>> +             { "vddaon", 26000 },
>>> +             { "vdddig", 126000 },
>>> +             { "vddrfa0p8", 102000 },
>>> +             { "vddrfa1p2", 257000 },
>>> +             { "vddrfa1p9", 302000 },
>>> +     },
>>> +     .num_vregs = 6,
>>> +     .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
>>> +};
>>> +
>>>   static void qca_power_shutdown(struct hci_uart *hu)
>>>   {
>>>        struct qca_serdev *qcadev;
>>> @@ -2074,7 +2096,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
>>>        if (data &&
>>>            (qca_is_wcn399x(data->soc_type) ||
>>>             qca_is_wcn6750(data->soc_type) ||
>>> -          qca_is_wcn6855(data->soc_type))) {
>>> +          qca_is_wcn6855(data->soc_type) ||
>>> +          qca_is_wcn7850(data->soc_type))) {
>>>                qcadev->btsoc_type = data->soc_type;
>>>                qcadev->bt_power = devm_kzalloc(&serdev->dev,
>>>                                                sizeof(struct qca_power),
>>> @@ -2105,7 +2128,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
>>>                                               GPIOD_IN);
>>>                if (IS_ERR_OR_NULL(qcadev->sw_ctrl) &&
>>>                    (data->soc_type == QCA_WCN6750 ||
>>> -                  data->soc_type == QCA_WCN6855))
>>> +                  data->soc_type == QCA_WCN6855 ||
>>> +                  data->soc_type == QCA_WCN7850))
>>>                        dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
>>>
>>>                qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
>>> @@ -2182,7 +2206,8 @@ static void qca_serdev_remove(struct serdev_device *serdev)
>>>
>>>        if ((qca_is_wcn399x(qcadev->btsoc_type) ||
>>>             qca_is_wcn6750(qcadev->btsoc_type) ||
>>> -          qca_is_wcn6855(qcadev->btsoc_type)) &&
>>> +          qca_is_wcn6855(qcadev->btsoc_type) ||
>>> +          qca_is_wcn7850(qcadev->btsoc_type)) &&
>>>            power->vregs_on)
>>>                qca_power_shutdown(&qcadev->serdev_hu);
>>>        else if (qcadev->susclk)
>>> @@ -2368,6 +2393,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
>>>        { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
>>>        { .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
>>>        { .compatible = "qcom,wcn6855-bt", .data = &qca_soc_data_wcn6855},
>>> +     { .compatible = "qcom,wcn7850-bt", .data = &qca_soc_data_wcn7850},
>>>        { /* sentinel */ }
>>>   };
>>>   MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
>>>
> 
> 
>