| Message ID | 20230606-topic-goodix-berlin-upstream-initial-v3-4-f0577cead709@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | input: touchscreen: add initial support for Goodix Berlin touchscreen IC | expand |
Hi Neil, On Thu, Jun 22, 2023 at 04:29:02PM +0200, Neil Armstrong wrote: > Add initial support for the new Goodix "Berlin" touchscreen ICs > over the SPI interface. > > The driver doesn't use the regmap_spi code since the SPI messages > needs to be prefixed, thus this custom regmap code. > > This initial driver is derived from the Goodix goodix_ts_berlin > available at [1] and [2] and only supports the GT9916 IC > present on the Qualcomm SM8550 MTP & QRD touch panel. > > The current implementation only supports BerlinD, aka GT9916. > > [1] https://github.com/goodix/goodix_ts_berlin > [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- Just a few comments below, then feel free to add: Reviewed-by: Jeff LaBundy <jeff@labundy.com> > drivers/input/touchscreen/Kconfig | 13 ++ > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/goodix_berlin_spi.c | 172 ++++++++++++++++++++++++++ > 3 files changed, 186 insertions(+) > > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index 5e21cca6025d..2d86615e5090 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -435,6 +435,19 @@ config TOUCHSCREEN_GOODIX_BERLIN_I2C > To compile this driver as a module, choose M here: the > module will be called goodix_berlin_i2c. > > +config TOUCHSCREEN_GOODIX_BERLIN_SPI > + tristate "Goodix Berlin SPI touchscreen" > + depends on SPI_MASTER select REGMAP (keep "depends on SPI_MASTER") > + select TOUCHSCREEN_GOODIX_BERLIN_CORE > + help > + Say Y here if you have a Goodix Berlin IC connected to > + your system via SPI. > + > + If unsure, say N. > + > + To compile this driver as a module, choose M here: the > + module will be called goodix_berlin_spi. > + > config TOUCHSCREEN_HIDEEP > tristate "HiDeep Touch IC" > depends on I2C > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile > index 921a2da0c2be..29524e8a83db 100644 > --- a/drivers/input/touchscreen/Makefile > +++ b/drivers/input/touchscreen/Makefile > @@ -49,6 +49,7 @@ obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o > obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o > obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE) += goodix_berlin_core.o > obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C) += goodix_berlin_i2c.o > +obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_SPI) += goodix_berlin_spi.o > obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o > obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX) += hynitron_cstxxx.o > obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o > diff --git a/drivers/input/touchscreen/goodix_berlin_spi.c b/drivers/input/touchscreen/goodix_berlin_spi.c > new file mode 100644 > index 000000000000..3a1bc251b32d > --- /dev/null > +++ b/drivers/input/touchscreen/goodix_berlin_spi.c > @@ -0,0 +1,172 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Goodix Berlin Touchscreen Driver > + * > + * Copyright (C) 2020 - 2021 Goodix, Inc. > + * Copyright (C) 2023 Linaro Ltd. > + * > + * Based on goodix_ts_berlin driver. > + */ > +#include <asm/unaligned.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/regmap.h> > +#include <linux/spi/spi.h> > + > +#include "goodix_berlin.h" > + > +#define SPI_TRANS_PREFIX_LEN 1 > +#define REGISTER_WIDTH 4 > +#define SPI_READ_DUMMY_LEN 3 > +#define SPI_READ_PREFIX_LEN (SPI_TRANS_PREFIX_LEN + REGISTER_WIDTH + SPI_READ_DUMMY_LEN) > +#define SPI_WRITE_PREFIX_LEN (SPI_TRANS_PREFIX_LEN + REGISTER_WIDTH) > + > +#define SPI_WRITE_FLAG 0xF0 > +#define SPI_READ_FLAG 0xF1 Please namespace all of these as you have done in the core driver. > + > +static int goodix_berlin_spi_read(void *context, const void *reg_buf, > + size_t reg_size, void *val_buf, > + size_t val_size) > +{ > + struct spi_device *spi = context; > + struct spi_transfer xfers; > + struct spi_message spi_msg; > + const u32 *reg = reg_buf; /* reg is stored as native u32 at start of buffer */ > + u8 *buf; > + int ret; int error; > + > + if (reg_size != REGISTER_WIDTH) > + return -EINVAL; > + > + buf = kzalloc(SPI_READ_PREFIX_LEN + val_size, GFP_KERNEL); > + if (!buf) > + return -ENOMEM; > + > + spi_message_init(&spi_msg); > + memset(&xfers, 0, sizeof(xfers)); > + > + /* buffer format: 0xF1 + addr(4bytes) + dummy(3bytes) + data */ > + buf[0] = SPI_READ_FLAG; > + put_unaligned_be32(*reg, buf + SPI_TRANS_PREFIX_LEN); > + memset(buf + SPI_TRANS_PREFIX_LEN + REGISTER_WIDTH, 0xff, > + SPI_READ_DUMMY_LEN); > + > + xfers.tx_buf = buf; > + xfers.rx_buf = buf; > + xfers.len = SPI_READ_PREFIX_LEN + val_size; > + xfers.cs_change = 0; > + spi_message_add_tail(&xfers, &spi_msg); > + > + ret = spi_sync(spi, &spi_msg); error = spi_sync(...); > + if (ret < 0) if (error) > + dev_err(&spi->dev, "transfer error:%d", ret); > + else > + memcpy(val_buf, buf + SPI_READ_PREFIX_LEN, val_size); > + > + kfree(buf); > + return ret; > +} > + > +static int goodix_berlin_spi_write(void *context, const void *data, > + size_t count) > +{ > + unsigned int len = count - REGISTER_WIDTH; > + struct spi_device *spi = context; > + struct spi_transfer xfers; > + struct spi_message spi_msg; > + const u32 *reg = data; /* reg is stored as native u32 at start of buffer */ > + u8 *buf; > + int ret; Same comments here regarding 'error' vs. 'ret'. > + > + buf = kzalloc(SPI_WRITE_PREFIX_LEN + len, GFP_KERNEL); > + if (!buf) > + return -ENOMEM; > + > + spi_message_init(&spi_msg); > + memset(&xfers, 0, sizeof(xfers)); > + > + buf[0] = SPI_WRITE_FLAG; > + put_unaligned_be32(*reg, buf + SPI_TRANS_PREFIX_LEN); > + memcpy(buf + SPI_WRITE_PREFIX_LEN, data + REGISTER_WIDTH, len); > + > + xfers.tx_buf = buf; > + xfers.len = SPI_WRITE_PREFIX_LEN + len; > + xfers.cs_change = 0; > + spi_message_add_tail(&xfers, &spi_msg); > + > + ret = spi_sync(spi, &spi_msg); > + if (ret < 0) > + dev_err(&spi->dev, "transfer error:%d", ret); > + > + kfree(buf); > + return ret; > +} > + > +static const struct regmap_config goodix_berlin_spi_regmap_conf = { > + .reg_bits = 32, > + .val_bits = 8, > + .read = goodix_berlin_spi_read, > + .write = goodix_berlin_spi_write, > +}; > + > +/* vendor & product left unassigned here, should probably be updated from fw info */ > +static const struct input_id goodix_berlin_spi_input_id = { > + .bustype = BUS_SPI, > +}; > + > +static int goodix_berlin_spi_probe(struct spi_device *spi) > +{ > + struct regmap_config *regmap_config; > + struct regmap *regmap; > + size_t max_size; > + int error = 0; > + > + regmap_config = devm_kmemdup(&spi->dev, &goodix_berlin_spi_regmap_conf, > + sizeof(*regmap_config), GFP_KERNEL); > + if (!regmap_config) > + return -ENOMEM; Is there any reason we cannot simply pass goodix_berlin_spi_regmap_conf to devm_regmap_init() below? Why to duplicate and pass the copy? For reference, BMP280 in IIO is a similar example of a device with regmap sitting atop a bespoke SPI protocol; it does not seem to take this extra step. > + > + spi->mode = SPI_MODE_0; > + spi->bits_per_word = 8; > + error = spi_setup(spi); > + if (error) > + return error; > + > + max_size = spi_max_transfer_size(spi); > + regmap_config->max_raw_read = max_size - SPI_READ_PREFIX_LEN; > + regmap_config->max_raw_write = max_size - SPI_WRITE_PREFIX_LEN; > + > + regmap = devm_regmap_init(&spi->dev, NULL, spi, regmap_config); > + if (IS_ERR(regmap)) > + return PTR_ERR(regmap); > + > + return goodix_berlin_probe(&spi->dev, spi->irq, > + &goodix_berlin_spi_input_id, regmap); > +} > + > +static const struct spi_device_id goodix_berlin_spi_ids[] = { > + { "gt9916" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(spi, goodix_berlin_spi_ids); > + > +static const struct of_device_id goodix_berlin_spi_of_match[] = { > + { .compatible = "goodix,gt9916", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, goodix_berlin_spi_of_match); > + > +static struct spi_driver goodix_berlin_spi_driver = { > + .driver = { > + .name = "goodix-berlin-spi", > + .of_match_table = goodix_berlin_spi_of_match, > + .pm = pm_sleep_ptr(&goodix_berlin_pm_ops), > + }, > + .probe = goodix_berlin_spi_probe, > + .id_table = goodix_berlin_spi_ids, > +}; > +module_spi_driver(goodix_berlin_spi_driver); > + > +MODULE_LICENSE("GPL"); > +MODULE_DESCRIPTION("Goodix Berlin SPI Touchscreen driver"); > +MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>"); > > -- > 2.34.1 > Kind regards, Jeff LaBundy
Hi Neil, On Mon, Jun 26, 2023 at 09:02:16AM +0200, Neil Armstrong wrote: [...] > > > +static int goodix_berlin_spi_probe(struct spi_device *spi) > > > +{ > > > + struct regmap_config *regmap_config; > > > + struct regmap *regmap; > > > + size_t max_size; > > > + int error = 0; > > > + > > > + regmap_config = devm_kmemdup(&spi->dev, &goodix_berlin_spi_regmap_conf, > > > + sizeof(*regmap_config), GFP_KERNEL); > > > + if (!regmap_config) > > > + return -ENOMEM; > > > > Is there any reason we cannot simply pass goodix_berlin_spi_regmap_conf to > > devm_regmap_init() below? Why to duplicate and pass the copy? > > > > For reference, BMP280 in IIO is a similar example of a device with regmap > > sitting atop a bespoke SPI protocol; it does not seem to take this extra > > step. > > The goodix_berlin_spi_regmap_conf copy is modified after with the correct > max raw read/write size, and I'm not a fan of modifying a global structure > that could be use for multiple probes, I can make a copy in a stack variable > if it feels simpler. Ah, that makes sense; in that case, the existing implementation seems fine to me. No changes necessary. Correct me if I'm wrong, but the stack variable method wouldn't work since that memory is gone after goodix_berlin_spi_probe() returns. Kind regards, Jeff LaBundy
Hi, On 26/06/2023 15:01, Jeff LaBundy wrote: > Hi Neil, > > On Mon, Jun 26, 2023 at 09:02:16AM +0200, Neil Armstrong wrote: > > [...] > >>>> +static int goodix_berlin_spi_probe(struct spi_device *spi) >>>> +{ >>>> + struct regmap_config *regmap_config; >>>> + struct regmap *regmap; >>>> + size_t max_size; >>>> + int error = 0; >>>> + >>>> + regmap_config = devm_kmemdup(&spi->dev, &goodix_berlin_spi_regmap_conf, >>>> + sizeof(*regmap_config), GFP_KERNEL); >>>> + if (!regmap_config) >>>> + return -ENOMEM; >>> >>> Is there any reason we cannot simply pass goodix_berlin_spi_regmap_conf to >>> devm_regmap_init() below? Why to duplicate and pass the copy? >>> >>> For reference, BMP280 in IIO is a similar example of a device with regmap >>> sitting atop a bespoke SPI protocol; it does not seem to take this extra >>> step. >> >> The goodix_berlin_spi_regmap_conf copy is modified after with the correct >> max raw read/write size, and I'm not a fan of modifying a global structure >> that could be use for multiple probes, I can make a copy in a stack variable >> if it feels simpler. > > Ah, that makes sense; in that case, the existing implementation seems fine > to me. No changes necessary. > > Correct me if I'm wrong, but the stack variable method wouldn't work since > that memory is gone after goodix_berlin_spi_probe() returns. The config is only needed for the devm_regmap_init() duration, so keeping the memory allocated for the whole lifetime of the device seems useless. Neil > > Kind regards, > Jeff LaBundy
Hi Neil, On Mon, Jun 26, 2023 at 03:20:35PM +0200, Neil Armstrong wrote: > Hi, > > On 26/06/2023 15:01, Jeff LaBundy wrote: > > Hi Neil, > > > > On Mon, Jun 26, 2023 at 09:02:16AM +0200, Neil Armstrong wrote: > > > > [...] > > > > > > > +static int goodix_berlin_spi_probe(struct spi_device *spi) > > > > > +{ > > > > > + struct regmap_config *regmap_config; > > > > > + struct regmap *regmap; > > > > > + size_t max_size; > > > > > + int error = 0; > > > > > + > > > > > + regmap_config = devm_kmemdup(&spi->dev, &goodix_berlin_spi_regmap_conf, > > > > > + sizeof(*regmap_config), GFP_KERNEL); > > > > > + if (!regmap_config) > > > > > + return -ENOMEM; > > > > > > > > Is there any reason we cannot simply pass goodix_berlin_spi_regmap_conf to > > > > devm_regmap_init() below? Why to duplicate and pass the copy? > > > > > > > > For reference, BMP280 in IIO is a similar example of a device with regmap > > > > sitting atop a bespoke SPI protocol; it does not seem to take this extra > > > > step. > > > > > > The goodix_berlin_spi_regmap_conf copy is modified after with the correct > > > max raw read/write size, and I'm not a fan of modifying a global structure > > > that could be use for multiple probes, I can make a copy in a stack variable > > > if it feels simpler. > > > > Ah, that makes sense; in that case, the existing implementation seems fine > > to me. No changes necessary. > > > > Correct me if I'm wrong, but the stack variable method wouldn't work since > > that memory is gone after goodix_berlin_spi_probe() returns. > > The config is only needed for the devm_regmap_init() duration, so keeping > the memory allocated for the whole lifetime of the device seems useless. I revisted the regmap code, and you are indeed correct. I agree with your suggestion. > > Neil > > > > > Kind regards, > > Jeff LaBundy > Kind regards, Jeff LaBundy
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 5e21cca6025d..2d86615e5090 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -435,6 +435,19 @@ config TOUCHSCREEN_GOODIX_BERLIN_I2C To compile this driver as a module, choose M here: the module will be called goodix_berlin_i2c. +config TOUCHSCREEN_GOODIX_BERLIN_SPI + tristate "Goodix Berlin SPI touchscreen" + depends on SPI_MASTER + select TOUCHSCREEN_GOODIX_BERLIN_CORE + help + Say Y here if you have a Goodix Berlin IC connected to + your system via SPI. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called goodix_berlin_spi. + config TOUCHSCREEN_HIDEEP tristate "HiDeep Touch IC" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 921a2da0c2be..29524e8a83db 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE) += goodix_berlin_core.o obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C) += goodix_berlin_i2c.o +obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_SPI) += goodix_berlin_spi.o obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX) += hynitron_cstxxx.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o diff --git a/drivers/input/touchscreen/goodix_berlin_spi.c b/drivers/input/touchscreen/goodix_berlin_spi.c new file mode 100644 index 000000000000..3a1bc251b32d --- /dev/null +++ b/drivers/input/touchscreen/goodix_berlin_spi.c @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Goodix Berlin Touchscreen Driver + * + * Copyright (C) 2020 - 2021 Goodix, Inc. + * Copyright (C) 2023 Linaro Ltd. + * + * Based on goodix_ts_berlin driver. + */ +#include <asm/unaligned.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> + +#include "goodix_berlin.h" + +#define SPI_TRANS_PREFIX_LEN 1 +#define REGISTER_WIDTH 4 +#define SPI_READ_DUMMY_LEN 3 +#define SPI_READ_PREFIX_LEN (SPI_TRANS_PREFIX_LEN + REGISTER_WIDTH + SPI_READ_DUMMY_LEN) +#define SPI_WRITE_PREFIX_LEN (SPI_TRANS_PREFIX_LEN + REGISTER_WIDTH) + +#define SPI_WRITE_FLAG 0xF0 +#define SPI_READ_FLAG 0xF1 + +static int goodix_berlin_spi_read(void *context, const void *reg_buf, + size_t reg_size, void *val_buf, + size_t val_size) +{ + struct spi_device *spi = context; + struct spi_transfer xfers; + struct spi_message spi_msg; + const u32 *reg = reg_buf; /* reg is stored as native u32 at start of buffer */ + u8 *buf; + int ret; + + if (reg_size != REGISTER_WIDTH) + return -EINVAL; + + buf = kzalloc(SPI_READ_PREFIX_LEN + val_size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + spi_message_init(&spi_msg); + memset(&xfers, 0, sizeof(xfers)); + + /* buffer format: 0xF1 + addr(4bytes) + dummy(3bytes) + data */ + buf[0] = SPI_READ_FLAG; + put_unaligned_be32(*reg, buf + SPI_TRANS_PREFIX_LEN); + memset(buf + SPI_TRANS_PREFIX_LEN + REGISTER_WIDTH, 0xff, + SPI_READ_DUMMY_LEN); + + xfers.tx_buf = buf; + xfers.rx_buf = buf; + xfers.len = SPI_READ_PREFIX_LEN + val_size; + xfers.cs_change = 0; + spi_message_add_tail(&xfers, &spi_msg); + + ret = spi_sync(spi, &spi_msg); + if (ret < 0) + dev_err(&spi->dev, "transfer error:%d", ret); + else + memcpy(val_buf, buf + SPI_READ_PREFIX_LEN, val_size); + + kfree(buf); + return ret; +} + +static int goodix_berlin_spi_write(void *context, const void *data, + size_t count) +{ + unsigned int len = count - REGISTER_WIDTH; + struct spi_device *spi = context; + struct spi_transfer xfers; + struct spi_message spi_msg; + const u32 *reg = data; /* reg is stored as native u32 at start of buffer */ + u8 *buf; + int ret; + + buf = kzalloc(SPI_WRITE_PREFIX_LEN + len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + spi_message_init(&spi_msg); + memset(&xfers, 0, sizeof(xfers)); + + buf[0] = SPI_WRITE_FLAG; + put_unaligned_be32(*reg, buf + SPI_TRANS_PREFIX_LEN); + memcpy(buf + SPI_WRITE_PREFIX_LEN, data + REGISTER_WIDTH, len); + + xfers.tx_buf = buf; + xfers.len = SPI_WRITE_PREFIX_LEN + len; + xfers.cs_change = 0; + spi_message_add_tail(&xfers, &spi_msg); + + ret = spi_sync(spi, &spi_msg); + if (ret < 0) + dev_err(&spi->dev, "transfer error:%d", ret); + + kfree(buf); + return ret; +} + +static const struct regmap_config goodix_berlin_spi_regmap_conf = { + .reg_bits = 32, + .val_bits = 8, + .read = goodix_berlin_spi_read, + .write = goodix_berlin_spi_write, +}; + +/* vendor & product left unassigned here, should probably be updated from fw info */ +static const struct input_id goodix_berlin_spi_input_id = { + .bustype = BUS_SPI, +}; + +static int goodix_berlin_spi_probe(struct spi_device *spi) +{ + struct regmap_config *regmap_config; + struct regmap *regmap; + size_t max_size; + int error = 0; + + regmap_config = devm_kmemdup(&spi->dev, &goodix_berlin_spi_regmap_conf, + sizeof(*regmap_config), GFP_KERNEL); + if (!regmap_config) + return -ENOMEM; + + spi->mode = SPI_MODE_0; + spi->bits_per_word = 8; + error = spi_setup(spi); + if (error) + return error; + + max_size = spi_max_transfer_size(spi); + regmap_config->max_raw_read = max_size - SPI_READ_PREFIX_LEN; + regmap_config->max_raw_write = max_size - SPI_WRITE_PREFIX_LEN; + + regmap = devm_regmap_init(&spi->dev, NULL, spi, regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return goodix_berlin_probe(&spi->dev, spi->irq, + &goodix_berlin_spi_input_id, regmap); +} + +static const struct spi_device_id goodix_berlin_spi_ids[] = { + { "gt9916" }, + { }, +}; +MODULE_DEVICE_TABLE(spi, goodix_berlin_spi_ids); + +static const struct of_device_id goodix_berlin_spi_of_match[] = { + { .compatible = "goodix,gt9916", }, + { } +}; +MODULE_DEVICE_TABLE(of, goodix_berlin_spi_of_match); + +static struct spi_driver goodix_berlin_spi_driver = { + .driver = { + .name = "goodix-berlin-spi", + .of_match_table = goodix_berlin_spi_of_match, + .pm = pm_sleep_ptr(&goodix_berlin_pm_ops), + }, + .probe = goodix_berlin_spi_probe, + .id_table = goodix_berlin_spi_ids, +}; +module_spi_driver(goodix_berlin_spi_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Goodix Berlin SPI Touchscreen driver"); +MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");
Add initial support for the new Goodix "Berlin" touchscreen ICs over the SPI interface. The driver doesn't use the regmap_spi code since the SPI messages needs to be prefixed, thus this custom regmap code. This initial driver is derived from the Goodix goodix_ts_berlin available at [1] and [2] and only supports the GT9916 IC present on the Qualcomm SM8550 MTP & QRD touch panel. The current implementation only supports BerlinD, aka GT9916. [1] https://github.com/goodix/goodix_ts_berlin [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- drivers/input/touchscreen/Kconfig | 13 ++ drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/goodix_berlin_spi.c | 172 ++++++++++++++++++++++++++ 3 files changed, 186 insertions(+)