diff mbox series

[V5,4/5] MIPS: Loongson64: DTS: Add RTC support to LS7A PCH

Message ID 25fa98ee2fac5955c68158ad7428900491981f2d.1685693501.git.zhoubinbin@loongson.cn
State Accepted
Commit 8a649e33f48e08be20c51541d9184645892ec370
Headers show
Series Add rtc driver for the Loongson family chips | expand

Commit Message

Binbin Zhou June 2, 2023, 9:50 a.m. UTC
The RTC module is now supported, enable it.

Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
---
 arch/mips/boot/dts/loongson/ls7a-pch.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Thomas Bogendoerfer June 26, 2023, 7:19 a.m. UTC | #1
On Fri, Jun 02, 2023 at 05:50:49PM +0800, Binbin Zhou wrote:
> The RTC module is now supported, enable it.
> 
> Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
> Signed-off-by: WANG Xuerui <git@xen0n.name>
> ---
>  arch/mips/boot/dts/loongson/ls7a-pch.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
> index 2f45fce2cdc4..7c69e8245c2f 100644
> --- a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
> +++ b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
> @@ -19,6 +19,13 @@ pic: interrupt-controller@10000000 {
>  			#interrupt-cells = <2>;
>  		};
>  
> +		rtc0: rtc@100d0100 {
> +			compatible = "loongson,ls7a-rtc";
> +			reg = <0 0x100d0100 0 0x78>;
> +			interrupt-parent = <&pic>;
> +			interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
>  		ls7a_uart0: serial@10080000 {
>  			compatible = "ns16550a";
>  			reg = <0 0x10080000 0 0x100>;
> -- 
> 2.39.1

applied to mips-next.

Thomas.
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
index 2f45fce2cdc4..7c69e8245c2f 100644
--- a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
+++ b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
@@ -19,6 +19,13 @@  pic: interrupt-controller@10000000 {
 			#interrupt-cells = <2>;
 		};
 
+		rtc0: rtc@100d0100 {
+			compatible = "loongson,ls7a-rtc";
+			reg = <0 0x100d0100 0 0x78>;
+			interrupt-parent = <&pic>;
+			interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		ls7a_uart0: serial@10080000 {
 			compatible = "ns16550a";
 			reg = <0 0x10080000 0 0x100>;