wifi: mt76: support per-band MAC addresses from OF child nodes

With dual-band-dual-congruent front-ends which appear as two independent
radios it is desirable to assign a per-band MAC address from device-tree,
eg. using nvmem-cells.
Support specifying MAC-address related properties in band-specific child
nodes, e.g.
        mt7915@0,0 {
                reg = <0x0000 0 0 0 0>;
                #addr-cells = <1>;
                #size-cells = <0>;

                band@0 {
                        /* 2.4 GHz */
                        reg = <0>;
                        nvmem-cells = <&macaddr 2>;
                        nvmem-cell-names = "mac-address";
                };

                band@1 {
                        /* 5 GHz */
                        reg = <1>;
                        nvmem-cells = <&macaddr 3>;
                        nvmem-cell-names = "mac-address";
                };
        };

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/net/wireless/mediatek/mt76/eeprom.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

Thanks.
Works well on MT7615D and MT7915D.

Tested-by: Shiji Yang <yangshiji66@outlook.com>

Hi,

On Thu, 13 Jul 2023 at 04:53, Daniel Golle <daniel@makrotopia.org> wrote:
>
> With dual-band-dual-congruent front-ends which appear as two independent
> radios it is desirable to assign a per-band MAC address from device-tree,
> eg. using nvmem-cells.
> Support specifying MAC-address related properties in band-specific child
> nodes, e.g.
>         mt7915@0,0 {
>                 reg = <0x0000 0 0 0 0>;
>                 #addr-cells = <1>;
>                 #size-cells = <0>;
>
>                 band@0 {
>                         /* 2.4 GHz */
>                         reg = <0>;
>                         nvmem-cells = <&macaddr 2>;
>                         nvmem-cell-names = "mac-address";
>                 };
>
>                 band@1 {
>                         /* 5 GHz */
>                         reg = <1>;
>                         nvmem-cells = <&macaddr 3>;
>                         nvmem-cell-names = "mac-address";
>                 };
>         };
>
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
>  drivers/net/wireless/mediatek/mt76/eeprom.c | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/eeprom.c b/drivers/net/wireless/mediatek/mt76/eeprom.c
> index dce851d42e083..90ee138843a55 100644
> --- a/drivers/net/wireless/mediatek/mt76/eeprom.c
> +++ b/drivers/net/wireless/mediatek/mt76/eeprom.c
> @@ -106,7 +106,20 @@ void
>  mt76_eeprom_override(struct mt76_phy *phy)
>  {
>         struct mt76_dev *dev = phy->dev;
> -       struct device_node *np = dev->dev->of_node;
> +       struct device_node *child_np, *np = dev->dev->of_node;
> +       u32 reg;
> +       int ret;
> +
> +       for_each_child_of_node(np, child_np) {
> +               ret = of_property_read_u32(child_np, "reg", &reg);
> +               if (ret)
> +                       continue;
> +
> +               if (reg == phy->band_idx) {
> +                       np = child_np;
> +                       break;

When breaking out of the loop here you still hold an additional
reference to child_np, so you need to call of_node_put() for it,
probably after calling of_get_mac_address().

> +               }
> +       }
>
>         of_get_mac_address(np, phy->macaddr);
>

probably just add a of_node_put(child_np); here, of_node_put() seems
to be NULL safe.


Regards,
Jonas