| Message ID | 20230721073214.1876417-4-huqiang.qin@amlogic.com |
|---|---|
| State | Accepted |
| Commit | 6387e0aa812297c4204d805b3df053fd58b699d1 |
| Headers | show |
| Series | Add binding header file for GPIO interrupt of Amlogic Meson-G12A | expand |
Huqiang Qin <huqiang.qin@amlogic.com> writes: > Replacing IRQ numbers with IRQID macro definitions makes node properties > easier to understand and also makes GPIO interrupts easier to use. > > Associated platforms: > - Amlogic Meson-G12A > - Amlogic Meson-G12B > - Amlogic Meson-SM1 Does this mean you tested/validated these changes on those platforms also? Kevin
Hi Kevin Hilman, On 2023/7/27 6:33, Kevin Hilman wrote: >> Replacing IRQ numbers with IRQID macro definitions makes node properties >> easier to understand and also makes GPIO interrupts easier to use. >> >> Associated platforms: >> - Amlogic Meson-G12A >> - Amlogic Meson-G12B >> - Amlogic Meson-SM1 > Does this mean you tested/validated these changes on those platforms > also? Amlogic's G12A/G12B/SM1 have the same GPIO, and the GPIO interrupt number is also the same, so I only tested on the SM1 platform, and the test results prove that these changes are good. Best Regards, Huqiang Qin
Huqiang Qin <huqiang.qin@amlogic.com> writes: > Hi Kevin Hilman, > > On 2023/7/27 6:33, Kevin Hilman wrote: >>> Replacing IRQ numbers with IRQID macro definitions makes node properties >>> easier to understand and also makes GPIO interrupts easier to use. >>> >>> Associated platforms: >>> - Amlogic Meson-G12A >>> - Amlogic Meson-G12B >>> - Amlogic Meson-SM1 >> Does this mean you tested/validated these changes on those platforms >> also? > > Amlogic's G12A/G12B/SM1 have the same GPIO, and the GPIO interrupt number > is also the same, so I only tested on the SM1 platform, and the test results > prove that these changes are good. OK, thank you for the explanation. For future reference, this kind of detail is helpful to describe in the patch or cover letter so maintainers & reviewers better understand how the changes were tested. Thanks, Kevin
Hi Kevin, On 2023/7/29 3:06, Kevin Hilman wrote: >> On 2023/7/27 6:33, Kevin Hilman wrote: >>>> Replacing IRQ numbers with IRQID macro definitions makes node properties >>>> easier to understand and also makes GPIO interrupts easier to use. >>>> >>>> Associated platforms: >>>> - Amlogic Meson-G12A >>>> - Amlogic Meson-G12B >>>> - Amlogic Meson-SM1 >>> Does this mean you tested/validated these changes on those platforms >>> also? >> >> Amlogic's G12A/G12B/SM1 have the same GPIO, and the GPIO interrupt number >> is also the same, so I only tested on the SM1 platform, and the test results >> prove that these changes are good. > > OK, thank you for the explanation. > > For future reference, this kind of detail is helpful to describe in the > patch or cover letter so maintainers & reviewers better understand how > the changes were tested. Thanks for the suggestion, I'll add it to the cover letter for the patch v3. (patch v2 was sent before your reply) Best Regards, Huqiang Qin
On Tue, Aug 1, 2023 at 3:25 PM Huqiang Qin <huqiang.qin@amlogic.com> wrote: > Thanks for the suggestion, I'll add it to the cover letter for the patch v3. > (patch v2 was sent before your reply) No need to send a v3, I just applied v2 to the pinctrl tree. Yours, Linus Walleij
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 0c49655cc90c..0142abfc930c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/g12a-aoclkc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq-meson-g12a-gpio.h> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h> #include <dt-bindings/thermal/thermal.h> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index b2bb94981838..c79f3e8d26b7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -344,7 +344,7 @@ external_phy: ethernet-phy@0 { interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi index 97e522921b06..428b35e1d79c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi @@ -201,7 +201,7 @@ external_phy: ethernet-phy@0 { interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi index 83709787eb91..c69b0f803916 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi @@ -327,7 +327,7 @@ external_phy: ethernet-phy@0 { interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts index 276e95b34022..eed2a23047ca 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts @@ -380,7 +380,7 @@ rk818: pmic@1c { compatible = "rockchip,rk818"; reg = <0x1c>; interrupt-parent = <&gpio_intc>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */ + interrupts = <IRQID_GPIOAO_7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */ #clock-cells = <1>; vcc1-supply = <&vdd_sys>; @@ -519,7 +519,7 @@ rk817: pmic@20 { reg = <0x20>; interrupt-parent = <&gpio_intc>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */ + interrupts = <IRQID_GPIOAO_5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */ vcc1-supply = <&vdd_sys>; vcc2-supply = <&vdd_sys>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 24d0442dffb2..01aa970b2f8c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -185,7 +185,7 @@ external_phy: ethernet-phy@0 { interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi index b40d2c1002c9..ac8b7178257e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi @@ -269,7 +269,7 @@ external_phy: ethernet-phy@0 { interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts index d1debccdc1c2..95e03bb02af2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts @@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 { interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi index 17045ff81c69..62404743e62d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi @@ -45,7 +45,7 @@ key { linux,code = <BTN_1>; gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; - interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>; }; }; @@ -217,7 +217,7 @@ external_phy: ethernet-phy@0 { interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts index 0f6660e68e72..ebda1dd30fa6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts @@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 { interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi index 2fce44939f45..86b90f44a4b3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -283,7 +283,7 @@ external_phy: ethernet-phy@0 { interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 9068a334ea57..4f07d6387bb1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -53,7 +53,7 @@ key-1 { linux,code = <BTN_0>; gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; - interrupts = <34 IRQ_TYPE_EDGE_BOTH>; + interrupts = <IRQID_GPIOH_6 IRQ_TYPE_EDGE_BOTH>; }; key-2 { @@ -61,7 +61,7 @@ key-2 { linux,code = <BTN_1>; gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; - interrupts = <35 IRQ_TYPE_EDGE_BOTH>; + interrupts = <IRQID_GPIOH_7 IRQ_TYPE_EDGE_BOTH>; }; key-3 { @@ -69,7 +69,7 @@ key-3 { linux,code = <BTN_2>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; - interrupts = <2 IRQ_TYPE_EDGE_BOTH>; + interrupts = <IRQID_GPIOAO_2 IRQ_TYPE_EDGE_BOTH>; }; key-mic-mute { @@ -78,7 +78,7 @@ key-mic-mute { linux,input-type = <EV_SW>; gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; - interrupts = <99 IRQ_TYPE_EDGE_BOTH>; + interrupts = <IRQID_GPIOE_2 IRQ_TYPE_EDGE_BOTH>; }; key-power { @@ -86,7 +86,7 @@ key-power { linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; - interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>; }; }; @@ -583,7 +583,7 @@ &uart_A { bluetooth { compatible = "brcm,bcm43438-bt"; interrupt-parent = <&gpio_intc>; - interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <IRQID_GPIOX_18 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "host-wakeup"; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; max-speed = <2000000>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts index 7e1a74046ba5..6ee406066ee0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts @@ -100,7 +100,7 @@ external_phy: ethernet-phy@0 { interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; };
Replacing IRQ numbers with IRQID macro definitions makes node properties easier to understand and also makes GPIO interrupts easier to use. Associated platforms: - Amlogic Meson-G12A - Amlogic Meson-G12B - Amlogic Meson-SM1 Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com> --- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 + arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 +- .../boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 2 +- arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi | 2 +- .../boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts | 4 ++-- .../arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +- arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi | 2 +- .../boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 2 +- arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi | 4 ++-- arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts | 2 +- arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 +- arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 12 ++++++------ .../boot/dts/amlogic/meson-sm1-x96-air-gbit.dts | 2 +- 13 files changed, 20 insertions(+), 19 deletions(-)