| Message ID | 20230728102753.266660-1-varshini.rajendran@microchip.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v3,01/50] dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x60, sam9x7 compatible | expand |
On 28/07/2023 12:27, Varshini Rajendran wrote: > Add sam9x7 bindings. > > Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> > --- > Documentation/devicetree/bindings/usb/atmel-usb.txt | 11 +++++++---- > 1 file changed, 7 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt > index 12183ef47ee4..82bd0dbc2a48 100644 > --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt > +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt > @@ -3,8 +3,9 @@ Atmel SOC USB controllers > OHCI > > Required properties: > - - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers > - used in host mode. > + - compatible: Should be "atmel,at91rm9200-ohci" or > + "microchip,sam9x7-ohci", "atmel,at91rm9200-ohci" > + for USB controllers used in host mode. > - reg: Address and length of the register set for the device > - interrupts: Should contain ohci interrupt > - clocks: Should reference the peripheral, host and system clocks > @@ -30,8 +31,9 @@ usb0: ohci@500000 { > EHCI > > Required properties: > - - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers > - used in host mode. > + - compatible: Should be "atmel,at91sam9g45-ehci" or > + "microchip,sam9x7-ehci", "atmel,at91sam9g45-ehci" This confuses me. Isn't microchip,sam9x7-ehci already described in EHCI bindings? Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index 12183ef47ee4..82bd0dbc2a48 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -3,8 +3,9 @@ Atmel SOC USB controllers OHCI Required properties: - - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers - used in host mode. + - compatible: Should be "atmel,at91rm9200-ohci" or + "microchip,sam9x7-ohci", "atmel,at91rm9200-ohci" + for USB controllers used in host mode. - reg: Address and length of the register set for the device - interrupts: Should contain ohci interrupt - clocks: Should reference the peripheral, host and system clocks @@ -30,8 +31,9 @@ usb0: ohci@500000 { EHCI Required properties: - - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers - used in host mode. + - compatible: Should be "atmel,at91sam9g45-ehci" or + "microchip,sam9x7-ehci", "atmel,at91sam9g45-ehci" + for USB controllers used in host mode. - reg: Address and length of the register set for the device - interrupts: Should contain ehci interrupt - clocks: Should reference the peripheral and the UTMI clocks @@ -87,6 +89,7 @@ Required properties: "atmel,at91sam9g45-udc" "atmel,sama5d3-udc" "microchip,sam9x60-udc" + "microchip,sam9x7-udc", "microchip,sam9x60-udc" "microchip,lan9662-udc" For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc" is required.
Add sam9x7 bindings. Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> --- Documentation/devicetree/bindings/usb/atmel-usb.txt | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)