diff mbox series

[v4,2/5] thermal/drivers/mediatek/lvts_thermal: Add suspend and resume

Message ID 20230530195132.2286163-3-bero@baylibre.com
State New
Headers show
Series None | expand

Commit Message

Bernhard Rosenkränzer May 30, 2023, 7:51 p.m. UTC
From: Balsam CHIHI <bchihi@baylibre.com>

Add suspend and resume support to LVTS driver.

Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/thermal/mediatek/lvts_thermal.c | 34 +++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

Comments

AngeloGioacchino Del Regno May 31, 2023, 8:05 a.m. UTC | #1
Il 30/05/23 21:51, Bernhard Rosenkränzer ha scritto:
> From: Balsam CHIHI <bchihi@baylibre.com>
> 
> Add suspend and resume support to LVTS driver.
> 
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> ---
>   drivers/thermal/mediatek/lvts_thermal.c | 34 +++++++++++++++++++++++++
>   1 file changed, 34 insertions(+)
> 
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index d0a3f95b7884b..5ea8a9d569ea6 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -1169,6 +1169,38 @@ static int lvts_remove(struct platform_device *pdev)
>   	return 0;
>   }
>   
> +static int lvts_suspend(struct platform_device *pdev, pm_message_t state)
> +{
> +	struct lvts_domain *lvts_td;
> +	int i;
> +
> +	lvts_td = platform_get_drvdata(pdev);
> +
> +	for (i = 0; i < lvts_td->num_lvts_ctrl; i++)
> +		lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false);
> +
> +	clk_disable_unprepare(lvts_td->clk);
> +
> +	return 0;
> +}
> +
> +static int lvts_resume(struct platform_device *pdev)
> +{
> +	struct lvts_domain *lvts_td;
> +	int i, ret;
> +
> +	lvts_td = platform_get_drvdata(pdev);
> +
> +	ret = clk_prepare_enable(lvts_td->clk);
> +	if (ret)
> +		return ret;
> +
> +	for (i = 0; i < lvts_td->num_lvts_ctrl; i++)
> +		lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], true);
> +
> +	return 0;
> +}
> +
>   static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
>   	{
>   		.cal_offset = { 0x04, 0x07 },
> @@ -1268,6 +1300,8 @@ MODULE_DEVICE_TABLE(of, lvts_of_match);
>   static struct platform_driver lvts_driver = {
>   	.probe = lvts_probe,
>   	.remove = lvts_remove,
> +	.suspend = lvts_suspend,

Should we do that in noirq handlers?
We're risking to miss a thermal interrupt.

Regards,
Angelo

> +	.resume = lvts_resume,
>   	.driver = {
>   		.name = "mtk-lvts-thermal",
>   		.of_match_table = lvts_of_match,
Daniel Lezcano Aug. 23, 2023, 7:48 a.m. UTC | #2
On 31/05/2023 10:05, AngeloGioacchino Del Regno wrote:

[ ... ]

>>   static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
>>       {
>>           .cal_offset = { 0x04, 0x07 },
>> @@ -1268,6 +1300,8 @@ MODULE_DEVICE_TABLE(of, lvts_of_match);
>>   static struct platform_driver lvts_driver = {
>>       .probe = lvts_probe,
>>       .remove = lvts_remove,
>> +    .suspend = lvts_suspend,
> 
> Should we do that in noirq handlers?
> We're risking to miss a thermal interrupt.

I'm not sure missing a thermal interrupt is a problem in this context 
but we may go in the irq routine with an undefined state sensor setup 
(eg. the internal clock stopped in the suspend and then read the sensor 
in the isr).

IMO, using suspend_noirq and resume_noirq may be required here.

Alexandre are you taking over the next iteration?
Alexandre Mergnat Sept. 25, 2023, 2:52 p.m. UTC | #3
On 23/08/2023 09:48, Daniel Lezcano wrote:
> On 31/05/2023 10:05, AngeloGioacchino Del Regno wrote:
> 
> [ ... ]
> 
>>>   static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
>>>       {
>>>           .cal_offset = { 0x04, 0x07 },
>>> @@ -1268,6 +1300,8 @@ MODULE_DEVICE_TABLE(of, lvts_of_match);
>>>   static struct platform_driver lvts_driver = {
>>>       .probe = lvts_probe,
>>>       .remove = lvts_remove,
>>> +    .suspend = lvts_suspend,
>>
>> Should we do that in noirq handlers?
>> We're risking to miss a thermal interrupt.
> 
> I'm not sure missing a thermal interrupt is a problem in this context 
> but we may go in the irq routine with an undefined state sensor setup 
> (eg. the internal clock stopped in the suspend and then read the sensor 
> in the isr).
> 
> IMO, using suspend_noirq and resume_noirq may be required here.
> 
> Alexandre are you taking over the next iteration?
> 
> 

Hi Daniel,

Sorry I missed your message...
I don't think taking over the next iteration, Bernhard should continue. 
Let me check internally to be sure. As I understood, the next change 
should be heavy.
diff mbox series

Patch

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index d0a3f95b7884b..5ea8a9d569ea6 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -1169,6 +1169,38 @@  static int lvts_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int lvts_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct lvts_domain *lvts_td;
+	int i;
+
+	lvts_td = platform_get_drvdata(pdev);
+
+	for (i = 0; i < lvts_td->num_lvts_ctrl; i++)
+		lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false);
+
+	clk_disable_unprepare(lvts_td->clk);
+
+	return 0;
+}
+
+static int lvts_resume(struct platform_device *pdev)
+{
+	struct lvts_domain *lvts_td;
+	int i, ret;
+
+	lvts_td = platform_get_drvdata(pdev);
+
+	ret = clk_prepare_enable(lvts_td->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < lvts_td->num_lvts_ctrl; i++)
+		lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], true);
+
+	return 0;
+}
+
 static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
 	{
 		.cal_offset = { 0x04, 0x07 },
@@ -1268,6 +1300,8 @@  MODULE_DEVICE_TABLE(of, lvts_of_match);
 static struct platform_driver lvts_driver = {
 	.probe = lvts_probe,
 	.remove = lvts_remove,
+	.suspend = lvts_suspend,
+	.resume = lvts_resume,
 	.driver = {
 		.name = "mtk-lvts-thermal",
 		.of_match_table = lvts_of_match,