diff mbox series

[v2,16/28] pinctrl: renesas: rzg2l: adapt function number for RZ/G3S

Message ID 20230929053915.1530607-17-claudiu.beznea@bp.renesas.com
State New
Headers show
Series Add new Renesas RZ/G3S SoC and RZ/G3S SMARC EVK | expand

Commit Message

Claudiu Beznea Sept. 29, 2023, 5:39 a.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

On RZ/G3S PFC register allow setting 8 functions for individual ports
(function1 to function8). For function1 register need to be configured
with 0, for function8 register need to be configured with 7.
We cannot use zero based addressing when requesting functions from
different code places as documentation (RZG3S_pinfunction_List_r1.0.xlsx)
states explicitly that function0 is GPIO.

For this add a new member to struct rzg2l_hwcfg that will keep the
offset that need to be substracted before applying a value to PFC register.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---

Changes in v2:
- in commit description mentioned that function0 is GPIO
- collected tags

 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

Comments

Geert Uytterhoeven Oct. 4, 2023, 12:58 p.m. UTC | #1 
On Fri, Sep 29, 2023 at 7:39 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> On RZ/G3S PFC register allow setting 8 functions for individual ports
> (function1 to function8). For function1 register need to be configured
> with 0, for function8 register need to be configured with 7.
> We cannot use zero based addressing when requesting functions from
> different code places as documentation (RZG3S_pinfunction_List_r1.0.xlsx)
> states explicitly that function0 is GPIO.
>
> For this add a new member to struct rzg2l_hwcfg that will keep the
> offset that need to be substracted before applying a value to PFC register.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>
> Changes in v2:
> - in commit description mentioned that function0 is GPIO
> - collected tags

Thanks, will queue in renesas-pinctrl-for-v6.7.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 7256d99fd552..73d8a84af04a 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -136,9 +136,11 @@  struct rzg2l_register_offsets {
 /**
  * struct rzg2l_hwcfg - hardware configuration data structure
  * @regs: hardware specific register offsets
+ * @func_base: base number for port function (see register PFC)
  */
 struct rzg2l_hwcfg {
 	const struct rzg2l_register_offsets regs;
+	u8 func_base;
 };
 
 struct rzg2l_dedicated_configs {
@@ -221,6 +223,7 @@  static int rzg2l_pinctrl_set_mux(struct pinctrl_dev *pctldev,
 				 unsigned int group_selector)
 {
 	struct rzg2l_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct rzg2l_hwcfg *hwcfg = pctrl->data->hwcfg;
 	const struct pinctrl_pin_desc *pin_desc;
 	unsigned int *psel_val, *pin_data;
 	struct function_desc *func;
@@ -246,9 +249,9 @@  static int rzg2l_pinctrl_set_mux(struct pinctrl_dev *pctldev,
 		off = RZG2L_PIN_CFG_TO_PORT_OFFSET(*pin_data);
 
 		dev_dbg(pctrl->dev, "port:%u pin: %u off:%x PSEL:%u\n",
-			RZG2L_PIN_ID_TO_PORT(pins[i]), pin, off, psel_val[i]);
+			RZG2L_PIN_ID_TO_PORT(pins[i]), pin, off, psel_val[i] - hwcfg->func_base);
 
-		rzg2l_pinctrl_set_pfc_mode(pctrl, pin, off, psel_val[i]);
+		rzg2l_pinctrl_set_pfc_mode(pctrl, pin, off, psel_val[i] - hwcfg->func_base);
 	}
 
 	return 0;