| Message ID | 20231003120846.28626-7-quic_nsekar@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Enable IPQ5018 PCI support | expand |
On 10/7/2023 5:57 AM, Konrad Dybcio wrote: > On 3.10.2023 14:08, Nitheesh Sekar wrote: >> Enable the PCIe controller and PHY nodes for RDP 432-c2. >> >> Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 9 +++++++++ >> 1 file changed, 9 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts >> index e636a1cb9b77..be7d92700517 100644 >> --- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts >> +++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts >> @@ -28,6 +28,15 @@ >> status = "okay"; >> }; >> >> +&pcie_x2 { >> + status = "ok"; > "okay" is preferred > > It's also preferred to keep status as the last property within > a node. > > Konrad Sure. will update. Thanks, Nitheesh
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts index e636a1cb9b77..be7d92700517 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts +++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts @@ -28,6 +28,15 @@ status = "okay"; }; +&pcie_x2 { + status = "ok"; + perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>; +}; + +&pcie_x2phy { + status = "ok"; +}; + &sdhc_1 { pinctrl-0 = <&sdc_default_state>; pinctrl-names = "default";
Enable the PCIe controller and PHY nodes for RDP 432-c2. Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com> --- arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 9 +++++++++ 1 file changed, 9 insertions(+)