diff mbox series

[3/5] arm64: dts: qcom: Add base SC8380XP dtsi and the QCP dts

Message ID 20231025142427.2661-4-quic_sibis@quicinc.com
State New
Headers show
Series dts: qcom: Introduce SC8380XP platforms device tree | expand

Commit Message

Sibi Sankar Oct. 25, 2023, 2:24 p.m. UTC
From: Rajendra Nayak <quic_rjendra@quicinc.com>

Add base dtsi and QCP board (Qualcomm Compute Platform) dts file for
SC8380XP SoC, describing the CPUs, GCC and RPMHCC clock controllers,
geni UART, interrupt controller, TLMM, reserved memory, interconnects,
SMMU and LLCC nodes.

Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile         |    1 +
 arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts |  398 +++
 arch/arm64/boot/dts/qcom/sc8380xp.dtsi    | 3267 +++++++++++++++++++++
 3 files changed, 3666 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc8380xp.dtsi

Comments

Konrad Dybcio Oct. 26, 2023, 10:36 a.m. UTC | #1
On 10/25/23 16:24, Sibi Sankar wrote:
> From: Rajendra Nayak <quic_rjendra@quicinc.com>
> 
> Add base dtsi and QCP board (Qualcomm Compute Platform) dts file for
> SC8380XP SoC, describing the CPUs, GCC and RPMHCC clock controllers,
> geni UART, interrupt controller, TLMM, reserved memory, interconnects,
> SMMU and LLCC nodes.
> 
> Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
> Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
> ---
[...]

> +&tlmm {
> +	gpio-reserved-ranges = <33 3>, <44 4>, <238 1>;
It would be really cool if you added an explanation on why these
GPIOs need to be reserved, especially since you can see what's
connected on there on schematics. So, like:

gpio-reserved-ranges = <33 3>, /* something */
		       <44 4>, /* something else (fp scanner?)
		       <238 1>; /* UFS reset? */


[...]

> +			compatible = "qcom,oryon";
Again, this compatible won't fly unless all of these cores
are totally identical and Oryon is only a name for this
generation on this SoC (which I believe not to be the case).

> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			next-level-cache = <&L1_0>;
> +
> +			L1_0: l1-cache {
> +				compatible = "cache";
I'm not sure if L1 is supposed to be described in the DT,
Krzysztof should know.

> +				next-level-cache = <&L2_0>;
> +
> +				L2_0: l2-cache-0 {
> +					compatible = "cache";
cache-level?
cache-unified?

[...]

> +	memory@80000000 {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the size */
> +		reg = <0 0x80000000 0 0x80000000>;
That contradicts the comment you made above. Plus, 2 GiB seems a
bit low for this SoC :D

[...]

> +		gunyah_hyp_mem: gunyah-hyp-region@80000000 {
you can probably strip the "-region" part, as this is implied by
being a child of /reserved-memory

> +		pld_pep_mem: pld-pep-region@81f30000 {
What's PLD?

What's this region used for? PEP is a Windows invention.

[...]

> +		av1_encoder_mem: av1-encoder-region@8e900000 {
Is AV1enc hardware separate from iris?

[...]

> +		gcc: clock-controller@100000 {
> +			compatible = "qcom,sc8380xp-gcc";
> +			reg = <0 0x100000 0 0x200000>;
The address part of reg should be padded to 8 hex digits.

> +
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
QCOM_ICC_TAG_ALWAYS would be nicer than 0 (see sa8775p)

[...]

> +
> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
One space after and before '='

Konrad
kernel test robot Oct. 26, 2023, 6:05 p.m. UTC | #2
Hi Sibi,

kernel test robot noticed the following build errors:

[auto build test ERROR on robh/for-next]
[also build test ERROR on arm64/for-next/core linus/master v6.6-rc7 next-20231026]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Sibi-Sankar/dt-bindings-arm-cpus-Add-qcom-oryon-compatible/20231026-001800
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20231025142427.2661-4-quic_sibis%40quicinc.com
patch subject: [PATCH 3/5] arm64: dts: qcom: Add base SC8380XP dtsi and the QCP dts
config: arm64-randconfig-004-20231026 (https://download.01.org/0day-ci/archive/20231027/202310270119.EeUyjyx2-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231027/202310270119.EeUyjyx2-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202310270119.EeUyjyx2-lkp@intel.com/

All errors (new ones prefixed by >>):

   In file included from arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts:10:
>> arch/arm64/boot/dts/qcom/sc8380xp.dtsi:7:10: fatal error: dt-bindings/clock/qcom,sc8380xp-gcc.h: No such file or directory
       7 | #include <dt-bindings/clock/qcom,sc8380xp-gcc.h>
         |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   compilation terminated.


vim +7 arch/arm64/boot/dts/qcom/sc8380xp.dtsi

   > 7	#include <dt-bindings/clock/qcom,sc8380xp-gcc.h>
     8	#include <dt-bindings/dma/qcom-gpi.h>
     9	#include <dt-bindings/interconnect/qcom,sc8380xp-rpmh.h>
    10	#include <dt-bindings/interrupt-controller/arm-gic.h>
    11	#include <dt-bindings/power/qcom,rpmhpd.h>
    12	#include <dt-bindings/power/qcom-rpmpd.h>
    13	#include <dt-bindings/soc/qcom,rpmh-rsc.h>
    14
Sibi Sankar Nov. 17, 2023, 4:16 a.m. UTC | #3
Hey Konrad,

On 10/26/23 16:06, Konrad Dybcio wrote:
> 
> 
> On 10/25/23 16:24, Sibi Sankar wrote:
>> From: Rajendra Nayak <quic_rjendra@quicinc.com>
>>
>> Add base dtsi and QCP board (Qualcomm Compute Platform) dts file for
>> SC8380XP SoC, describing the CPUs, GCC and RPMHCC clock controllers,
>> geni UART, interrupt controller, TLMM, reserved memory, interconnects,
>> SMMU and LLCC nodes.
>>
>> Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
>> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
>> Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
>> Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
>> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
>> ---
> [...]
> 
>> +&tlmm {
>> +    gpio-reserved-ranges = <33 3>, <44 4>, <238 1>;
> It would be really cool if you added an explanation on why these
> GPIOs need to be reserved, especially since you can see what's
> connected on there on schematics. So, like:
> 
> gpio-reserved-ranges = <33 3>, /* something */
>                 <44 4>, /* something else (fp scanner?)
>                 <238 1>; /* UFS reset? */

will do.

> 
> 
> [...]
> 
>> +            compatible = "qcom,oryon";
> Again, this compatible won't fly unless all of these cores
> are totally identical and Oryon is only a name for this
> generation on this SoC (which I believe not to be the case).
> 
>> +            reg = <0x0 0x0>;
>> +            enable-method = "psci";
>> +            next-level-cache = <&L1_0>;
>> +
>> +            L1_0: l1-cache {
>> +                compatible = "cache";
> I'm not sure if L1 is supposed to be described in the DT,
> Krzysztof should know.
> 
>> +                next-level-cache = <&L2_0>;
>> +
>> +                L2_0: l2-cache-0 {
>> +                    compatible = "cache";
> cache-level?
> cache-unified?

ack will remove the l1 and use ^^ appropriately.

> 
> [...]
> 
>> +    memory@80000000 {
>> +        device_type = "memory";
>> +        /* We expect the bootloader to fill in the size */
>> +        reg = <0 0x80000000 0 0x80000000>;
> That contradicts the comment you made above. Plus, 2 GiB seems a
> bit low for this SoC :D

will fix this.

> 
> [...]
> 
>> +        gunyah_hyp_mem: gunyah-hyp-region@80000000 {
> you can probably strip the "-region" part, as this is implied by
> being a child of /reserved-memory

ok, will do but all the previous SoCs do it differently.

> 
>> +        pld_pep_mem: pld-pep-region@81f30000 {
> What's PLD?
> 
> What's this region used for? PEP is a Windows invention.
> 

We list all the possible reserved memory regions from the reference doc.
I can remove the unused regions in the platforms dts later once this
series lands.

> [...]
> 
>> +        av1_encoder_mem: av1-encoder-region@8e900000 {
> Is AV1enc hardware separate from iris?

no, it isn't separate from iris AFAIK.

> 
> [...]
> 
>> +        gcc: clock-controller@100000 {
>> +            compatible = "qcom,sc8380xp-gcc";
>> +            reg = <0 0x100000 0 0x200000>;
> The address part of reg should be padded to 8 hex digits.

thanks for catching this.

> 
>> +
>> +                interconnects = <&clk_virt MASTER_QUP_CORE_2 0 
>> &clk_virt SLAVE_QUP_CORE_2 0>,
> QCOM_ICC_TAG_ALWAYS would be nicer than 0 (see sa8775p)

will do.

> 
> [...]
> 
>> +
>> +            interrupts =    <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> One space after and before '='

ack

> 
> Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d6cb840b7050..48d0f2063f3c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -167,6 +167,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-lenovo-flex-5g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-primus.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8380xp-qcp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sda660-inforce-ifc6560.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-motorola-ali.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-ganges-kirin.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts b/arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts
new file mode 100644
index 000000000000..4eb107fa178c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts
@@ -0,0 +1,398 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8380xp.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SC8380XP QCP";
+	compatible = "qcom,sc8380xp-qcp", "qcom,sc8380xp";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l4-supply = <&vreg_s4c_1p8>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vph_pwr>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vph_pwr>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <33 3>, <44 4>, <238 1>;
+};
+
+&uart21 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8380xp.dtsi b/arch/arm64/boot/dts/qcom/sc8380xp.dtsi
new file mode 100644
index 000000000000..ac3d674502d2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8380xp.dtsi
@@ -0,0 +1,3267 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8380xp-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,sc8380xp-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L1_0>;
+
+			L1_0: l1-cache {
+				compatible = "cache";
+				next-level-cache = <&L2_0>;
+
+				L2_0: l2-cache-0 {
+					compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L1_1>;
+
+			L1_1: l1-cache {
+				compatible = "cache";
+				next-level-cache = <&L2_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L1_2>;
+
+			L1_2: l1-cache {
+				compatible = "cache";
+				next-level-cache = <&L2_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L1_3>;
+
+			L1_3: l1-cache {
+				compatible = "cache";
+				next-level-cache = <&L2_0>;
+			};
+		};
+
+		CPU4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&L1_4>;
+
+			L1_4: l1-cache {
+				compatible = "cache";
+				next-level-cache = <&L2_1>;
+
+				L2_1: l2-cache-1 {
+					compatible = "cache";
+				};
+			};
+		};
+
+		CPU5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&L1_5>;
+
+			L1_5: l1-cache {
+				compatible = "cache";
+				next-level-cache = <&L2_1>;
+			};
+		};
+
+		CPU6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&L1_6>;
+
+			L1_6: l1-cache {
+				compatible = "cache";
+				next-level-cache = <&L2_1>;
+			};
+		};
+
+		CPU7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&L1_7>;
+
+			L1_7: l1-cache {
+				compatible = "cache";
+				next-level-cache = <&L2_1>;
+			};
+		};
+
+		CPU8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+			next-level-cache = <&L1_8>;
+
+			L1_8: l1-cache {
+				compatible = "cache";
+				next-level-cache = <&L2_2>;
+
+				L2_2: l2-cache-2 {
+					compatible = "cache";
+				};
+			};
+		};
+
+		CPU9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+			next-level-cache = <&L1_9>;
+
+			L1_9: l1-cache {
+				compatible = "cache";
+				next-level-cache = <&L2_2>;
+			};
+		};
+
+		CPU10: cpu@20200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20200>;
+			enable-method = "psci";
+			next-level-cache = <&L1_10>;
+
+			L1_10: l1-cache {
+				compatible = "cache";
+				next-level-cache = <&L2_2>;
+			};
+		};
+
+		CPU11: cpu@20300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20300>;
+			enable-method = "psci";
+			next-level-cache = <&L1_11>;
+
+			L1_11: l1-cache {
+				compatible = "cache";
+				next-level-cache = <&L2_2>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+
+				core1 {
+					cpu = <&CPU9>;
+				};
+
+				core2 {
+					cpu = <&CPU10>;
+				};
+
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sc8380xp", "qcom,scm";
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sc8380xp-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sc8380xp-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0x80000000>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gunyah_hyp_mem: gunyah-hyp-region@80000000 {
+			reg = <0x0 0x80000000 0x0 0x800000>;
+			no-map;
+		};
+
+		hyp_elf_package_mem: hyp-elf_package-region@80800000 {
+			reg = <0x0 0x80800000 0x0 0x200000>;
+			no-map;
+		};
+
+		ncc_mem: ncc-region@80a00000 {
+			reg = <0x0 0x80a00000 0x0 0x400000>;
+			no-map;
+		};
+
+		cpucp_log_mem: cpucp-log-region@80e00000 {
+			reg = <0x0 0x80e00000 0x0 0x40000>;
+			no-map;
+		};
+
+		cpucp_mem: cpucp-region@80e40000 {
+			reg = <0x0 0x80e40000 0x0 0x540000>;
+			no-map;
+		};
+
+		reserved_mem: reserved-region@81380000 {
+			reg = <0x0 0x81380000 0x0 0x80000>;
+			no-map;
+		};
+
+		tags_mem: tags-region@81400000 {
+			reg = <0x0 0x81400000 0x0 0x1a0000>;
+			no-map;
+		};
+
+		xbl_dtlog_mem: xbl-dtlog-region@81a00000 {
+			reg = <0x0 0x81a00000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump-region@81a40000 {
+			reg = <0x0 0x81a40000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image-region@81c00000 {
+			reg = <0x0 0x81c00000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x81c60000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config-region@81c80000 {
+			reg = <0x0 0x81c80000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: tme-crash-dump-region@81ca0000 {
+			reg = <0x0 0x81ca0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log-region@81ce0000 {
+			reg = <0x0 0x81ce0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log-region@81ce4000 {
+			reg = <0x0 0x81ce4000 0x0 0x10000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss-region@81cff000 {
+			reg = <0x0 0x81cff000 0x0 0x1000>;
+			no-map;
+		};
+
+		pdp_ns_shared_mem: pdp-ns-shared-region@81e00000 {
+			reg = <0x0 0x81e00000 0x0 0x100000>;
+			no-map;
+		};
+
+		gpu_prr_mem: gpu-prr-region@81f00000 {
+			reg = <0x0 0x81f00000 0x0 0x10000>;
+			no-map;
+		};
+
+		tpm_control_mem: tpm-control-region@81f10000 {
+			reg = <0x0 0x81f10000 0x0 0x10000>;
+			no-map;
+		};
+
+		usb_ucsi_shared_mem: usb-ucsi-shared-region@81f20000 {
+			reg = <0x0 0x81f20000 0x0 0x10000>;
+			no-map;
+		};
+
+		pld_pep_mem: pld-pep-region@81f30000 {
+			reg = <0x0 0x81f30000 0x0 0x6000>;
+			no-map;
+		};
+
+		pld_gmu_mem: pld-gmu-region@81f36000 {
+			reg = <0x0 0x81f36000 0x0 0x1000>;
+			no-map;
+		};
+
+		pld_pdp_mem: pld-pdp-region@81f37000 {
+			reg = <0x0 0x81f37000 0x0 0x1000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat-region@82700000 {
+			reg = <0x0 0x82700000 0x0 0x100000>;
+			no-map;
+		};
+
+		xbl_tmp_buffer_mem: xbl-tmp-buffer-region@82800000 {
+			reg = <0x0 0x82800000 0x0 0xc00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap-region@84b00000 {
+			reg = <0x0 0x84b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		spu_secure_shared_memory_mem: spu-secure-shared-memory-region@85300000 {
+			reg = <0x0 0x85300000 0x0 0x80000>;
+			no-map;
+		};
+
+		adsp_boot_dtb_mem: adsp-boot-dtb-region@866c0000 {
+			reg = <0x0 0x866c0000 0x0 0x40000>;
+			no-map;
+		};
+
+		spss_region_mem: spss-region-region@86700000 {
+			reg = <0x0 0x86700000 0x0 0x400000>;
+			no-map;
+		};
+
+		adsp_boot_mem: adsp-boot-region@86b00000 {
+			reg = <0x0 0x86b00000 0x0 0xc00000>;
+			no-map;
+		};
+
+		video_mem: video-region@87700000 {
+			reg = <0x0 0x87700000 0x0 0x700000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi-region@87e00000 {
+			reg = <0x0 0x87e00000 0x0 0x3a00000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb-region@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0x80000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@8b900000 {
+			reg = <0x0 0x8b900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@8d900000 {
+			reg = <0x0 0x8d900000 0x0 0x80000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode-region@8d9fe000 {
+			reg = <0x0 0x8d9fe000 0x0 0x2000>;
+			no-map;
+		};
+
+		cvp_mem: cvp-region@8da00000 {
+			reg = <0x0 0x8da00000 0x0 0x700000>;
+			no-map;
+		};
+
+		camera_mem: camera-region@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x800000>;
+			no-map;
+		};
+
+		av1_encoder_mem: av1-encoder-region@8e900000 {
+			reg = <0x0 0x8e900000 0x0 0x700000>;
+			no-map;
+		};
+
+		reserved_mem1: reserved-region@8f000000 {
+			reg = <0x0 0x8f000000 0x0 0xa00000>;
+			no-map;
+		};
+
+		wpss_mem: wpss-region@8fa00000 {
+			reg = <0x0 0x8fa00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		q6_wpss_dtb_mem: q6-wpss-dtb-region@91300000 {
+			reg = <0x0 0x91300000 0x0 0x80000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc-region@d8000000 {
+			reg = <0x0 0xd8000000 0x0 0x40000>;
+			no-map;
+		};
+
+		reserved_mem2: reserved-region@d8040000 {
+			reg = <0x0 0xd8040000 0x0 0xa0000>;
+			no-map;
+		};
+
+		qtee_mem: qtee-region@d80e0000 {
+			reg = <0x0 0xd80e0000 0x0 0x520000>;
+			no-map;
+		};
+
+		ta_mem: ta-region@d8600000 {
+			reg = <0x0 0xd8600000 0x0 0x8a00000>;
+			no-map;
+		};
+
+		tags_mem1: tags-region@e1000000 {
+			reg = <0x0 0xe1000000 0x0 0x26a0000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi-region@ff800000 {
+			reg = <0x0 0xff800000 0x0 0x600000>;
+			no-map;
+		};
+
+		smem_mem: smem-region@ffe00000 {
+			reg = <0x0 0xffe00000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sc8380xp-gcc";
+			reg = <0 0x100000 0 0x200000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sc8380xp-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c16: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c16_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi16: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c17: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c17_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi17: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c18: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c18_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi18: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c19: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c19_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi19: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c20: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c20_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi20: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c21: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c21_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi21: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart21: serial@894000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart21_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			i2c22: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c22_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi22: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c23: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c23_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi23: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sc8380xp-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 777 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 779 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x136 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x123 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma0: dma-controller@b00000  {
+			compatible = "qcom,sc8380xp-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00b00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x456 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_0: geniqup@bc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00bc0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x443 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@b80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0xb80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@b80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@b84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@b84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@b88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@b88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0xb88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@b8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@b8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@b90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0xb90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@b90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@b94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@b94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@b98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@b98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@b9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi7: spi@b9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,sc8380xp-cnoc-main";
+			reg = <0 0x1500000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,sc8380xp-cnoc-cfg";
+			reg = <0 0x1600000 0 0x6600>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sc8380xp-system-noc";
+			reg = <0 0x1680000 0 0x1c080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_south_anoc: interconnect@16c0000 {
+			compatible = "qcom,sc8380xp-pcie-south-anoc";
+			reg = <0 0x16c0000 0 0xd080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_center_anoc: interconnect@16d0000 {
+			compatible = "qcom,sc8380xp-pcie-center-anoc";
+			reg = <0 0x16d0000 0 0x7000>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sc8380xp-aggre1-noc";
+			reg = <0 0x16E0000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sc8380xp-aggre2-noc";
+			reg = <0 0x1700000 0 0x1c400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_north_anoc: interconnect@1740000 {
+			compatible = "qcom,sc8380xp-pcie-north-anoc";
+			reg = <0 0x1740000 0 0x9080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_center_anoc: interconnect@1750000 {
+			compatible = "qcom,sc8380xp-usb-center-anoc";
+			reg = <0 0x1750000 0 0x8800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_north_anoc: interconnect@1760000 {
+			compatible = "qcom,sc8380xp-usb-north-anoc";
+			reg = <0 0x1760000 0 0x7080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_south_anoc: interconnect@1770000 {
+			compatible = "qcom,sc8380xp-usb-south-anoc";
+			reg = <0 0x1770000 0 0xf080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,sc8380xp-mmss-noc";
+			reg = <0 0x1780000 0 0x5B800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		gem_noc: interconnect@26400000 {
+			compatible = "qcom,sc8380xp-gem-noc";
+			reg = <0 0x26400000 0 0x311200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sc8380xp-nsp-noc";
+			reg = <0 0x320C0000 0 0xE080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,sc8380xp-lpass-ag-noc";
+			reg = <0 0x7e40000 0 0xE080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,sc8380xp-lpass-lpiaon-noc";
+			reg = <0 0x7400000 0 0x19080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,sc8380xp-lpass-lpicx-noc";
+			reg = <0 0x7430000 0 0x3A200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sc8380xp-tlmm";
+			reg = <0 0x0f100000 0 0xf00000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 239>;
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup0_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup0_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup0_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup0_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup0_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup0_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio24", "gpio25";
+				function = "qup0_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio14", "gpio15";
+				function = "qup0_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio54", "gpio55";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c17_data_clk: qup-i2c17-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c18_data_clk: qup-i2c18-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c19_data_clk: qup-i2c19-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c20_data_clk: qup-i2c20-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c21_data_clk: qup-i2c21-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio84", "gpio85";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c22_data_clk: qup-i2c22-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio88", "gpio89";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c23_data_clk: qup-i2c23-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio86", "gpio87";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio3";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio7";
+				function = "qup0_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup0_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio11";
+				function = "qup0_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup0_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio15";
+				function = "qup0_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup0_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio19";
+				function = "qup0_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup0_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio23";
+				function = "qup0_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup0_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio27";
+				function = "qup0_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup0_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio13";
+				function = "qup0_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio14", "gpio15", "gpio12";
+				function = "qup0_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio53";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio54", "gpio55", "gpio52";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi16_cs: qup-spi16-cs-state {
+				pins = "gpio67";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio64", "gpio65", "gpio66";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi17_cs: qup-spi17-cs-state {
+				pins = "gpio71";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi17_data_clk: qup-spi17-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio68", "gpio69", "gpio70";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_cs: qup-spi18-cs-state {
+				pins = "gpio75";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_data_clk: qup-spi18-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio72", "gpio73", "gpio74";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_cs: qup-spi19-cs-state {
+				pins = "gpio79";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_data_clk: qup-spi19-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio76", "gpio77", "gpio78";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_cs: qup-spi20-cs-state {
+				pins = "gpio83";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_data_clk: qup-spi20-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio80", "gpio81", "gpio82";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi21_cs: qup-spi21-cs-state {
+				pins = "gpio87";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi21_data_clk: qup-spi21-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio84", "gpio85", "gpio86";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi22_cs: qup-spi22-cs-state {
+				pins = "gpio91";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi22_data_clk: qup-spi22-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio88", "gpio89", "gpio90";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi23_cs: qup-spi23-cs-state {
+				pins = "gpio85";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi23_data_clk: qup-spi23-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio86", "gpio87", "gpio84";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart21_default: qup-uart21-default-state {
+				/* TX, RX */
+				pins = "gpio86", "gpio87";
+				function = "qup2_se5";
+				drive-strength= <2>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sc8380xp-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+
+			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+		};
+
+		intc: interrupt-controller@17000000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17000000 0 0x10000>,     /* GICD */
+			      <0 0x17080000 0 0x480000>;    /* GICR * 12 */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17040000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17040000 0 0x40000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17500000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17500000 0 0x10000>,
+			      <0 0x17510000 0 0x10000>,
+			      <0 0x17520000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			qcom,drv-count = <3>;
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sc8380xp-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sc8380xp-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		timer@17800000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17800000 0 0x1000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			frame@17801000 {
+				reg = <0 0x17801000 0 0x1000>,
+				      <0 0x17802000 0 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@17803000 {
+				reg = <0 0x17803000 0 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@17805000 {
+				reg = <0 0x17805000 0 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@17807000 {
+				reg = <0 0x17807000 0 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@17809000 {
+				reg = <0 0x17809000 0 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1780b000 {
+				reg = <0 0x1780b000 0 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1780d000 {
+				reg = <0 0x1780d000 0 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,sc8380xp-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>,
+			      <0 0x25a00000 0 0x200000>,
+			      <0 0x25c00000 0 0x200000>,
+			      <0 0x25e00000 0 0x200000>,
+			      <0 0x26000000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc4_base",
+				    "llcc5_base",
+				    "llcc6_base",
+				    "llcc7_base",
+				    "llcc_broadcast_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};