@@ -14,6 +14,7 @@ dtb-$(CONFIG_BOARD_COMTREND_CT5361) += comtrend,ct-5361.dtb
dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb
dtb-$(CONFIG_BOARD_COMTREND_WAP5813N) += comtrend,wap-5813n.dtb
dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb
+dtb-$(CONFIG_BOARD_INTENO_XG6846) += inteno,xg6846.dtb
dtb-$(CONFIG_BOARD_MT7620_RFB) += mediatek,mt7620-rfb.dtb
dtb-$(CONFIG_BOARD_MT7620_MT7530_RFB) += mediatek,mt7620-mt7530-rfb.dtb
dtb-$(CONFIG_BOARD_MT7621_RFB) += mediatek,mt7621-rfb.dtb
new file mode 100644
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023 Linus Walleij <linusw@kernel.org>
+ *
+ * This is a diet version of the device tree from Linux,
+ * suitable for U-Boot.
+ */
+
+/dts-v1/;
+
+#include "brcm,bcm6328.dtsi"
+
+/ {
+ model = "Inteno XG6846";
+ compatible = "inteno,xg6846", "brcm,bcm6328";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&leds {
+ status = "okay";
+
+ led@18 {
+ reg = <18>;
+ active-low;
+ label = "red:pwr";
+ };
+
+ led@20 {
+ reg = <20>;
+ active-low;
+ label = "green:pwr";
+ };
+};
+
+&spi {
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <33333334>;
+ };
+};
+
+&uart0 {
+ bootph-all;
+ status = "okay";
+};
@@ -203,6 +203,17 @@ config BOARD_HUAWEI_HG556A
ethernet ports, 3 USB ports, 1 UART, GPIO buttons and LEDs, and
a RT3062F/AR9223 (PCI).
+config BOARD_INTENO_XG6846
+ bool "Inteno XG6846"
+ depends on SOC_BMIPS_BCM6328
+ select BMIPS_SUPPORTS_BOOT_RAM
+ help
+ Inteno XG6846 boards have a BCM6328 SoC with 64 MB of RAM and 16
+ MB of flash (SPI).
+ Between its different peripherals there's an integrated switch with 4
+ ethernet ports, 1 UART, GPIO buttons and LEDs, and a Marvell
+ DSA switch connected to a fiber SFP.
+
config BOARD_NETGEAR_CG3100D
bool "Netgear CG3100D"
depends on SOC_BMIPS_BCM3380
@@ -272,6 +283,7 @@ source "board/comtrend/ct5361/Kconfig"
source "board/comtrend/vr3032u/Kconfig"
source "board/comtrend/wap5813n/Kconfig"
source "board/huawei/hg556a/Kconfig"
+source "board/inteno/xg6846/Kconfig"
source "board/netgear/cg3100d/Kconfig"
source "board/netgear/dgnd3700v2/Kconfig"
source "board/sagem/f@st1704/Kconfig"
new file mode 100644
@@ -0,0 +1,12 @@
+if BOARD_INTENO_XG6846
+
+config SYS_BOARD
+ default "xg6846"
+
+config SYS_VENDOR
+ default "inteno"
+
+config SYS_CONFIG_NAME
+ default "inteno_xg6846"
+
+endif
new file mode 100644
@@ -0,0 +1,6 @@
+INTENO XG6846 BOARD
+M: Linus Walleij <linusw@kernel.org>
+S: Maintained
+F: board/inteno/xg6846
+F: include/configs/inteno_xg6846.h
+F: configs/inteno_xg6846_ram_defconfig
new file mode 100644
@@ -0,0 +1,74 @@
+CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_TEXT_BASE=0x81c00000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x2000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="inteno,xg6846"
+CONFIG_SYS_PROMPT="XG6846 # "
+CONFIG_DM_RESET=y
+CONFIG_IDENT_STRING="Inteno XG6846"
+CONFIG_SYS_LOAD_ADDR=0x81000000
+CONFIG_ARCH_BMIPS=y
+CONFIG_SOC_BMIPS_BCM6328=y
+CONFIG_SYS_MIPS_TIMER_FREQ=160000000
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+# CONFIG_BOOTSTD is not set
+CONFIG_BOOTDELAY=1
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Boot XG6846 in %d seconds\n"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="sf probe; sf read 0x81000000 0x40000 0x500000; bootm 0x81000000"
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_LZMA=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REMAKE_ELF=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_SYS_MALLOC_BOOTPARAMS=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=24
+CONFIG_SYS_CBSIZE=512
+CONFIG_SYS_PBSIZE=541
+CONFIG_SYS_BOOTM_LEN=0x1000000
+CONFIG_CMD_CPU=y
+CONFIG_CMD_LICENSE=y
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_SPI=y
+# CONFIG_CMD_SLEEP is not set
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_DMA=y
+CONFIG_BCM6348_IUDMA=y
+CONFIG_LED=y
+CONFIG_LED_BCM6328=y
+CONFIG_LED_BLINK=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_RESET_DELAY=20
+CONFIG_POWER_DOMAIN=y
+CONFIG_BCM6328_POWER_DOMAIN=y
+CONFIG_RESET_BCM6345=y
+CONFIG_DM_SERIAL=y
+CONFIG_BCM6345_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_BCM63XX_HSSPI=y
new file mode 100644
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2023 Linus Walleij <linusw@kernel.org>
+ */
+
+#include <configs/bmips_common.h>
+#include <configs/bmips_bcm6328.h>
+