@@ -1201,6 +1201,20 @@ config MFD_RK8XX_I2C
through I2C interface. The device supports multiple sub-devices
including interrupts, RTC, LDO & DCDC regulators, and onkey.
+config MFD_RK8XX_SPI
+ tristate "Rockchip RK806 Power Management Chip"
+ depends on SPI && OF
+ select MFD_CORE
+ select REGMAP_SPI
+ select REGMAP_IRQ
+ select MFD_RK8XX
+ help
+ If you say yes here you get support for the RK806 Power Management
+ chip.
+ This driver provides common support for accessing the device
+ through an SPI interface. The device supports multiple sub-devices
+ including interrupts, LDO & DCDC regulators, and power on-key.
+
config MFD_RN5T618
tristate "Ricoh RN5T567/618 PMIC"
depends on I2C
@@ -216,6 +216,7 @@ obj-$(CONFIG_MFD_NTXEC) += ntxec.o
obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
obj-$(CONFIG_MFD_RK8XX) += rk8xx-core.o
obj-$(CONFIG_MFD_RK8XX_I2C) += rk8xx-i2c.o
+obj-$(CONFIG_MFD_RK8XX_SPI) += rk8xx-spi.o
obj-$(CONFIG_MFD_RN5T618) += rn5t618.o
obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
obj-$(CONFIG_MFD_SYSCON) += syscon.o
@@ -37,6 +37,11 @@ static const struct resource rk805_key_resources[] = {
DEFINE_RES_IRQ(RK805_IRQ_PWRON_FALL),
};
+static struct resource rk806_pwrkey_resources[] = {
+ DEFINE_RES_IRQ(RK806_IRQ_PWRON_FALL),
+ DEFINE_RES_IRQ(RK806_IRQ_PWRON_RISE),
+};
+
static const struct resource rk817_pwrkey_resources[] = {
DEFINE_RES_IRQ(RK817_IRQ_PWRON_RISE),
DEFINE_RES_IRQ(RK817_IRQ_PWRON_FALL),
@@ -64,6 +69,17 @@ static const struct mfd_cell rk805s[] = {
},
};
+static const struct mfd_cell rk806s[] = {
+ { .name = "rk805-pinctrl", .id = PLATFORM_DEVID_AUTO, },
+ { .name = "rk808-regulator", .id = PLATFORM_DEVID_AUTO, },
+ {
+ .name = "rk805-pwrkey",
+ .resources = rk806_pwrkey_resources,
+ .num_resources = ARRAY_SIZE(rk806_pwrkey_resources),
+ .id = PLATFORM_DEVID_AUTO,
+ },
+};
+
static const struct mfd_cell rk808s[] = {
{ .name = "rk808-clkout", .id = PLATFORM_DEVID_NONE, },
{ .name = "rk808-regulator", .id = PLATFORM_DEVID_NONE, },
@@ -123,6 +139,12 @@ static const struct rk808_reg_data rk805_pre_init_reg[] = {
{RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
};
+static const struct rk808_reg_data rk806_pre_init_reg[] = {
+ { RK806_GPIO_INT_CONFIG, RK806_INT_POL_MSK, RK806_INT_POL_L },
+ { RK806_SYS_CFG3, RK806_SLAVE_RESTART_FUN_MSK, RK806_SLAVE_RESTART_FUN_EN },
+ { RK806_SYS_OPTION, RK806_SYS_ENB2_2M_MSK, RK806_SYS_ENB2_2M_EN },
+};
+
static const struct rk808_reg_data rk808_pre_init_reg[] = {
{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
@@ -273,6 +295,27 @@ static const struct regmap_irq rk805_irqs[] = {
},
};
+static const struct regmap_irq rk806_irqs[] = {
+ /* INT_STS0 IRQs */
+ REGMAP_IRQ_REG(RK806_IRQ_PWRON_FALL, 0, RK806_INT_STS_PWRON_FALL),
+ REGMAP_IRQ_REG(RK806_IRQ_PWRON_RISE, 0, RK806_INT_STS_PWRON_RISE),
+ REGMAP_IRQ_REG(RK806_IRQ_PWRON, 0, RK806_INT_STS_PWRON),
+ REGMAP_IRQ_REG(RK806_IRQ_PWRON_LP, 0, RK806_INT_STS_PWRON_LP),
+ REGMAP_IRQ_REG(RK806_IRQ_HOTDIE, 0, RK806_INT_STS_HOTDIE),
+ REGMAP_IRQ_REG(RK806_IRQ_VDC_RISE, 0, RK806_INT_STS_VDC_RISE),
+ REGMAP_IRQ_REG(RK806_IRQ_VDC_FALL, 0, RK806_INT_STS_VDC_FALL),
+ REGMAP_IRQ_REG(RK806_IRQ_VB_LO, 0, RK806_INT_STS_VB_LO),
+ /* INT_STS1 IRQs */
+ REGMAP_IRQ_REG(RK806_IRQ_REV0, 1, RK806_INT_STS_REV0),
+ REGMAP_IRQ_REG(RK806_IRQ_REV1, 1, RK806_INT_STS_REV1),
+ REGMAP_IRQ_REG(RK806_IRQ_REV2, 1, RK806_INT_STS_REV2),
+ REGMAP_IRQ_REG(RK806_IRQ_CRC_ERROR, 1, RK806_INT_STS_CRC_ERROR),
+ REGMAP_IRQ_REG(RK806_IRQ_SLP3_GPIO, 1, RK806_INT_STS_SLP3_GPIO),
+ REGMAP_IRQ_REG(RK806_IRQ_SLP2_GPIO, 1, RK806_INT_STS_SLP2_GPIO),
+ REGMAP_IRQ_REG(RK806_IRQ_SLP1_GPIO, 1, RK806_INT_STS_SLP1_GPIO),
+ REGMAP_IRQ_REG(RK806_IRQ_WDT, 1, RK806_INT_STS_WDT),
+};
+
static const struct regmap_irq rk808_irqs[] = {
/* INT_STS */
[RK808_IRQ_VOUT_LO] = {
@@ -423,6 +466,18 @@ static struct regmap_irq_chip rk805_irq_chip = {
.init_ack_masked = true,
};
+static struct regmap_irq_chip rk806_irq_chip = {
+ .name = "rk806",
+ .irqs = rk806_irqs,
+ .num_irqs = ARRAY_SIZE(rk806_irqs),
+ .num_regs = 2,
+ .irq_reg_stride = 2,
+ .mask_base = RK806_INT_MSK0,
+ .status_base = RK806_INT_STS0,
+ .ack_base = RK806_INT_STS0,
+ .init_ack_masked = true,
+};
+
static const struct regmap_irq_chip rk808_irq_chip = {
.name = "rk808",
.irqs = rk808_irqs,
@@ -549,6 +604,7 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
struct rk808 *rk808;
const struct rk808_reg_data *pre_init_reg;
const struct mfd_cell *cells;
+ int dual_support = 0;
int nr_pre_init_regs;
int nr_cells;
int ret;
@@ -570,6 +626,14 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
cells = rk805s;
nr_cells = ARRAY_SIZE(rk805s);
break;
+ case RK806_ID:
+ rk808->regmap_irq_chip = &rk806_irq_chip;
+ pre_init_reg = rk806_pre_init_reg;
+ nr_pre_init_regs = ARRAY_SIZE(rk806_pre_init_reg);
+ cells = rk806s;
+ nr_cells = ARRAY_SIZE(rk806s);
+ dual_support = IRQF_SHARED;
+ break;
case RK808_ID:
rk808->regmap_irq_chip = &rk808_irq_chip;
pre_init_reg = rk808_pre_init_reg;
@@ -601,7 +665,7 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
return dev_err_probe(dev, -EINVAL, "No interrupt support, no core IRQ\n");
ret = devm_regmap_add_irq_chip(dev, rk808->regmap, irq,
- IRQF_ONESHOT, -1,
+ IRQF_ONESHOT | dual_support, -1,
rk808->regmap_irq_chip, &rk808->irq_data);
if (ret)
return dev_err_probe(dev, ret, "Failed to add irq_chip\n");
@@ -616,8 +680,7 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
pre_init_reg[i].addr);
}
- ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
- cells, nr_cells, NULL, 0,
+ ret = devm_mfd_add_devices(dev, 0, cells, nr_cells, NULL, 0,
regmap_irq_get_domain(rk808->irq_data));
if (ret)
return dev_err_probe(dev, ret, "failed to add MFD devices\n");
new file mode 100644
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip RK806 Core (SPI) driver
+ *
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2023 Collabora Ltd.
+ *
+ * Author: Xu Shengfei <xsf@rock-chips.com>
+ * Author: Sebastian Reichel <sebastian.reichel@collabora.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rk808.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#define RK806_ADDR_SIZE 2
+#define RK806_CMD_WITH_SIZE(CMD, VALUE_BYTES) \
+ (RK806_CMD_##CMD | RK806_CMD_CRC_DIS | (VALUE_BYTES - 1))
+
+static const struct regmap_range rk806_volatile_ranges[] = {
+ regmap_reg_range(RK806_POWER_EN0, RK806_POWER_EN5),
+ regmap_reg_range(RK806_DVS_START_CTRL, RK806_INT_MSK1),
+};
+
+static const struct regmap_access_table rk806_volatile_table = {
+ .yes_ranges = rk806_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(rk806_volatile_ranges),
+};
+
+static const struct regmap_config rk806_regmap_config_spi = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .max_register = RK806_BUCK_RSERVE_REG5,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_table = &rk806_volatile_table,
+};
+
+static int rk806_spi_bus_write(void *context, const void *vdata, size_t count)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ struct spi_transfer xfer[2] = { 0 };
+ /* data and thus count includes the register address */
+ size_t val_size = count - RK806_ADDR_SIZE;
+ char cmd;
+
+ if (val_size < 1 || val_size > (RK806_CMD_LEN_MSK + 1))
+ return -EINVAL;
+
+ cmd = RK806_CMD_WITH_SIZE(WRITE, val_size);
+
+ xfer[0].tx_buf = &cmd;
+ xfer[0].len = sizeof(cmd);
+ xfer[1].tx_buf = vdata;
+ xfer[1].len = count;
+
+ return spi_sync_transfer(spi, xfer, ARRAY_SIZE(xfer));
+}
+
+static int rk806_spi_bus_read(void *context, const void *vreg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ char txbuf[3] = { 0 };
+
+ if (reg_size != RK806_ADDR_SIZE ||
+ val_size < 1 || val_size > (RK806_CMD_LEN_MSK + 1))
+ return -EINVAL;
+
+ /* TX buffer contains command byte followed by two address bytes */
+ txbuf[0] = RK806_CMD_WITH_SIZE(READ, val_size);
+ memcpy(txbuf+1, vreg, reg_size);
+
+ return spi_write_then_read(spi, txbuf, sizeof(txbuf), val, val_size);
+}
+
+static const struct regmap_bus rk806_regmap_bus_spi = {
+ .write = rk806_spi_bus_write,
+ .read = rk806_spi_bus_read,
+ .reg_format_endian_default = REGMAP_ENDIAN_LITTLE,
+};
+
+static int rk8xx_spi_probe(struct spi_device *spi)
+{
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init(&spi->dev, &rk806_regmap_bus_spi,
+ &spi->dev, &rk806_regmap_config_spi);
+ if (IS_ERR(regmap))
+ return dev_err_probe(&spi->dev, PTR_ERR(regmap),
+ "Failed to init regmap\n");
+
+ return rk8xx_probe(&spi->dev, RK806_ID, spi->irq, regmap);
+}
+
+static const struct of_device_id rk8xx_spi_of_match[] = {
+ { .compatible = "rockchip,rk806", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rk8xx_spi_of_match);
+
+static const struct spi_device_id rk8xx_spi_id_table[] = {
+ { "rk806", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, rk8xx_spi_id_table);
+
+static struct spi_driver rk8xx_spi_driver = {
+ .driver = {
+ .name = "rk8xx-spi",
+ .of_match_table = rk8xx_spi_of_match,
+ },
+ .probe = rk8xx_spi_probe,
+ .id_table = rk8xx_spi_id_table,
+};
+module_spi_driver(rk8xx_spi_driver);
+
+MODULE_AUTHOR("Xu Shengfei <xsf@rock-chips.com>");
+MODULE_DESCRIPTION("RK8xx SPI PMIC driver");
+MODULE_LICENSE("GPL");
@@ -289,6 +289,414 @@ enum rk805_reg {
#define RK805_INT_ALARM_EN (1 << 3)
#define RK805_INT_TIMER_EN (1 << 2)
+/* RK806 */
+#define RK806_POWER_EN0 0x0
+#define RK806_POWER_EN1 0x1
+#define RK806_POWER_EN2 0x2
+#define RK806_POWER_EN3 0x3
+#define RK806_POWER_EN4 0x4
+#define RK806_POWER_EN5 0x5
+#define RK806_POWER_SLP_EN0 0x6
+#define RK806_POWER_SLP_EN1 0x7
+#define RK806_POWER_SLP_EN2 0x8
+#define RK806_POWER_DISCHRG_EN0 0x9
+#define RK806_POWER_DISCHRG_EN1 0xA
+#define RK806_POWER_DISCHRG_EN2 0xB
+#define RK806_BUCK_FB_CONFIG 0xC
+#define RK806_SLP_LP_CONFIG 0xD
+#define RK806_POWER_FPWM_EN0 0xE
+#define RK806_POWER_FPWM_EN1 0xF
+#define RK806_BUCK1_CONFIG 0x10
+#define RK806_BUCK2_CONFIG 0x11
+#define RK806_BUCK3_CONFIG 0x12
+#define RK806_BUCK4_CONFIG 0x13
+#define RK806_BUCK5_CONFIG 0x14
+#define RK806_BUCK6_CONFIG 0x15
+#define RK806_BUCK7_CONFIG 0x16
+#define RK806_BUCK8_CONFIG 0x17
+#define RK806_BUCK9_CONFIG 0x18
+#define RK806_BUCK10_CONFIG 0x19
+#define RK806_BUCK1_ON_VSEL 0x1A
+#define RK806_BUCK2_ON_VSEL 0x1B
+#define RK806_BUCK3_ON_VSEL 0x1C
+#define RK806_BUCK4_ON_VSEL 0x1D
+#define RK806_BUCK5_ON_VSEL 0x1E
+#define RK806_BUCK6_ON_VSEL 0x1F
+#define RK806_BUCK7_ON_VSEL 0x20
+#define RK806_BUCK8_ON_VSEL 0x21
+#define RK806_BUCK9_ON_VSEL 0x22
+#define RK806_BUCK10_ON_VSEL 0x23
+#define RK806_BUCK1_SLP_VSEL 0x24
+#define RK806_BUCK2_SLP_VSEL 0x25
+#define RK806_BUCK3_SLP_VSEL 0x26
+#define RK806_BUCK4_SLP_VSEL 0x27
+#define RK806_BUCK5_SLP_VSEL 0x28
+#define RK806_BUCK6_SLP_VSEL 0x29
+#define RK806_BUCK7_SLP_VSEL 0x2A
+#define RK806_BUCK8_SLP_VSEL 0x2B
+#define RK806_BUCK9_SLP_VSEL 0x2D
+#define RK806_BUCK10_SLP_VSEL 0x2E
+#define RK806_BUCK_DEBUG1 0x30
+#define RK806_BUCK_DEBUG2 0x31
+#define RK806_BUCK_DEBUG3 0x32
+#define RK806_BUCK_DEBUG4 0x33
+#define RK806_BUCK_DEBUG5 0x34
+#define RK806_BUCK_DEBUG6 0x35
+#define RK806_BUCK_DEBUG7 0x36
+#define RK806_BUCK_DEBUG8 0x37
+#define RK806_BUCK_DEBUG9 0x38
+#define RK806_BUCK_DEBUG10 0x39
+#define RK806_BUCK_DEBUG11 0x3A
+#define RK806_BUCK_DEBUG12 0x3B
+#define RK806_BUCK_DEBUG13 0x3C
+#define RK806_BUCK_DEBUG14 0x3D
+#define RK806_BUCK_DEBUG15 0x3E
+#define RK806_BUCK_DEBUG16 0x3F
+#define RK806_BUCK_DEBUG17 0x40
+#define RK806_BUCK_DEBUG18 0x41
+#define RK806_NLDO_IMAX 0x42
+#define RK806_NLDO1_ON_VSEL 0x43
+#define RK806_NLDO2_ON_VSEL 0x44
+#define RK806_NLDO3_ON_VSEL 0x45
+#define RK806_NLDO4_ON_VSEL 0x46
+#define RK806_NLDO5_ON_VSEL 0x47
+#define RK806_NLDO1_SLP_VSEL 0x48
+#define RK806_NLDO2_SLP_VSEL 0x49
+#define RK806_NLDO3_SLP_VSEL 0x4A
+#define RK806_NLDO4_SLP_VSEL 0x4B
+#define RK806_NLDO5_SLP_VSEL 0x4C
+#define RK806_PLDO_IMAX 0x4D
+#define RK806_PLDO1_ON_VSEL 0x4E
+#define RK806_PLDO2_ON_VSEL 0x4F
+#define RK806_PLDO3_ON_VSEL 0x50
+#define RK806_PLDO4_ON_VSEL 0x51
+#define RK806_PLDO5_ON_VSEL 0x52
+#define RK806_PLDO6_ON_VSEL 0x53
+#define RK806_PLDO1_SLP_VSEL 0x54
+#define RK806_PLDO2_SLP_VSEL 0x55
+#define RK806_PLDO3_SLP_VSEL 0x56
+#define RK806_PLDO4_SLP_VSEL 0x57
+#define RK806_PLDO5_SLP_VSEL 0x58
+#define RK806_PLDO6_SLP_VSEL 0x59
+#define RK806_CHIP_NAME 0x5A
+#define RK806_CHIP_VER 0x5B
+#define RK806_OTP_VER 0x5C
+#define RK806_SYS_STS 0x5D
+#define RK806_SYS_CFG0 0x5E
+#define RK806_SYS_CFG1 0x5F
+#define RK806_SYS_OPTION 0x61
+#define RK806_SLEEP_CONFIG0 0x62
+#define RK806_SLEEP_CONFIG1 0x63
+#define RK806_SLEEP_CTR_SEL0 0x64
+#define RK806_SLEEP_CTR_SEL1 0x65
+#define RK806_SLEEP_CTR_SEL2 0x66
+#define RK806_SLEEP_CTR_SEL3 0x67
+#define RK806_SLEEP_CTR_SEL4 0x68
+#define RK806_SLEEP_CTR_SEL5 0x69
+#define RK806_DVS_CTRL_SEL0 0x6A
+#define RK806_DVS_CTRL_SEL1 0x6B
+#define RK806_DVS_CTRL_SEL2 0x6C
+#define RK806_DVS_CTRL_SEL3 0x6D
+#define RK806_DVS_CTRL_SEL4 0x6E
+#define RK806_DVS_CTRL_SEL5 0x6F
+#define RK806_DVS_START_CTRL 0x70
+#define RK806_SLEEP_GPIO 0x71
+#define RK806_SYS_CFG3 0x72
+#define RK806_ON_SOURCE 0x74
+#define RK806_OFF_SOURCE 0x75
+#define RK806_PWRON_KEY 0x76
+#define RK806_INT_STS0 0x77
+#define RK806_INT_MSK0 0x78
+#define RK806_INT_STS1 0x79
+#define RK806_INT_MSK1 0x7A
+#define RK806_GPIO_INT_CONFIG 0x7B
+#define RK806_DATA_REG0 0x7C
+#define RK806_DATA_REG1 0x7D
+#define RK806_DATA_REG2 0x7E
+#define RK806_DATA_REG3 0x7F
+#define RK806_DATA_REG4 0x80
+#define RK806_DATA_REG5 0x81
+#define RK806_DATA_REG6 0x82
+#define RK806_DATA_REG7 0x83
+#define RK806_DATA_REG8 0x84
+#define RK806_DATA_REG9 0x85
+#define RK806_DATA_REG10 0x86
+#define RK806_DATA_REG11 0x87
+#define RK806_DATA_REG12 0x88
+#define RK806_DATA_REG13 0x89
+#define RK806_DATA_REG14 0x8A
+#define RK806_DATA_REG15 0x8B
+#define RK806_TM_REG 0x8C
+#define RK806_OTP_EN_REG 0x8D
+#define RK806_FUNC_OTP_EN_REG 0x8E
+#define RK806_TEST_REG1 0x8F
+#define RK806_TEST_REG2 0x90
+#define RK806_TEST_REG3 0x91
+#define RK806_TEST_REG4 0x92
+#define RK806_TEST_REG5 0x93
+#define RK806_BUCK_VSEL_OTP_REG0 0x94
+#define RK806_BUCK_VSEL_OTP_REG1 0x95
+#define RK806_BUCK_VSEL_OTP_REG2 0x96
+#define RK806_BUCK_VSEL_OTP_REG3 0x97
+#define RK806_BUCK_VSEL_OTP_REG4 0x98
+#define RK806_BUCK_VSEL_OTP_REG5 0x99
+#define RK806_BUCK_VSEL_OTP_REG6 0x9A
+#define RK806_BUCK_VSEL_OTP_REG7 0x9B
+#define RK806_BUCK_VSEL_OTP_REG8 0x9C
+#define RK806_BUCK_VSEL_OTP_REG9 0x9D
+#define RK806_NLDO1_VSEL_OTP_REG0 0x9E
+#define RK806_NLDO1_VSEL_OTP_REG1 0x9F
+#define RK806_NLDO1_VSEL_OTP_REG2 0xA0
+#define RK806_NLDO1_VSEL_OTP_REG3 0xA1
+#define RK806_NLDO1_VSEL_OTP_REG4 0xA2
+#define RK806_PLDO_VSEL_OTP_REG0 0xA3
+#define RK806_PLDO_VSEL_OTP_REG1 0xA4
+#define RK806_PLDO_VSEL_OTP_REG2 0xA5
+#define RK806_PLDO_VSEL_OTP_REG3 0xA6
+#define RK806_PLDO_VSEL_OTP_REG4 0xA7
+#define RK806_PLDO_VSEL_OTP_REG5 0xA8
+#define RK806_BUCK_EN_OTP_REG1 0xA9
+#define RK806_NLDO_EN_OTP_REG1 0xAA
+#define RK806_PLDO_EN_OTP_REG1 0xAB
+#define RK806_BUCK_FB_RES_OTP_REG1 0xAC
+#define RK806_OTP_RESEV_REG0 0xAD
+#define RK806_OTP_RESEV_REG1 0xAE
+#define RK806_OTP_RESEV_REG2 0xAF
+#define RK806_OTP_RESEV_REG3 0xB0
+#define RK806_OTP_RESEV_REG4 0xB1
+#define RK806_BUCK_SEQ_REG0 0xB2
+#define RK806_BUCK_SEQ_REG1 0xB3
+#define RK806_BUCK_SEQ_REG2 0xB4
+#define RK806_BUCK_SEQ_REG3 0xB5
+#define RK806_BUCK_SEQ_REG4 0xB6
+#define RK806_BUCK_SEQ_REG5 0xB7
+#define RK806_BUCK_SEQ_REG6 0xB8
+#define RK806_BUCK_SEQ_REG7 0xB9
+#define RK806_BUCK_SEQ_REG8 0xBA
+#define RK806_BUCK_SEQ_REG9 0xBB
+#define RK806_BUCK_SEQ_REG10 0xBC
+#define RK806_BUCK_SEQ_REG11 0xBD
+#define RK806_BUCK_SEQ_REG12 0xBE
+#define RK806_BUCK_SEQ_REG13 0xBF
+#define RK806_BUCK_SEQ_REG14 0xC0
+#define RK806_BUCK_SEQ_REG15 0xC1
+#define RK806_BUCK_SEQ_REG16 0xC2
+#define RK806_BUCK_SEQ_REG17 0xC3
+#define RK806_HK_TRIM_REG1 0xC4
+#define RK806_HK_TRIM_REG2 0xC5
+#define RK806_BUCK_REF_TRIM_REG1 0xC6
+#define RK806_BUCK_REF_TRIM_REG2 0xC7
+#define RK806_BUCK_REF_TRIM_REG3 0xC8
+#define RK806_BUCK_REF_TRIM_REG4 0xC9
+#define RK806_BUCK_REF_TRIM_REG5 0xCA
+#define RK806_BUCK_OSC_TRIM_REG1 0xCB
+#define RK806_BUCK_OSC_TRIM_REG2 0xCC
+#define RK806_BUCK_OSC_TRIM_REG3 0xCD
+#define RK806_BUCK_OSC_TRIM_REG4 0xCE
+#define RK806_BUCK_OSC_TRIM_REG5 0xCF
+#define RK806_BUCK_TRIM_ZCDIOS_REG1 0xD0
+#define RK806_BUCK_TRIM_ZCDIOS_REG2 0xD1
+#define RK806_NLDO_TRIM_REG1 0xD2
+#define RK806_NLDO_TRIM_REG2 0xD3
+#define RK806_NLDO_TRIM_REG3 0xD4
+#define RK806_PLDO_TRIM_REG1 0xD5
+#define RK806_PLDO_TRIM_REG2 0xD6
+#define RK806_PLDO_TRIM_REG3 0xD7
+#define RK806_TRIM_ICOMP_REG1 0xD8
+#define RK806_TRIM_ICOMP_REG2 0xD9
+#define RK806_EFUSE_CONTROL_REGH 0xDA
+#define RK806_FUSE_PROG_REG 0xDB
+#define RK806_MAIN_FSM_STS_REG 0xDD
+#define RK806_FSM_REG 0xDE
+#define RK806_TOP_RESEV_OFFR 0xEC
+#define RK806_TOP_RESEV_POR 0xED
+#define RK806_BUCK_VRSN_REG1 0xEE
+#define RK806_BUCK_VRSN_REG2 0xEF
+#define RK806_NLDO_RLOAD_SEL_REG1 0xF0
+#define RK806_PLDO_RLOAD_SEL_REG1 0xF1
+#define RK806_PLDO_RLOAD_SEL_REG2 0xF2
+#define RK806_BUCK_CMIN_MX_REG1 0xF3
+#define RK806_BUCK_CMIN_MX_REG2 0xF4
+#define RK806_BUCK_FREQ_SET_REG1 0xF5
+#define RK806_BUCK_FREQ_SET_REG2 0xF6
+#define RK806_BUCK_RS_MEABS_REG1 0xF7
+#define RK806_BUCK_RS_MEABS_REG2 0xF8
+#define RK806_BUCK_RS_ZDLEB_REG1 0xF9
+#define RK806_BUCK_RS_ZDLEB_REG2 0xFA
+#define RK806_BUCK_RSERVE_REG1 0xFB
+#define RK806_BUCK_RSERVE_REG2 0xFC
+#define RK806_BUCK_RSERVE_REG3 0xFD
+#define RK806_BUCK_RSERVE_REG4 0xFE
+#define RK806_BUCK_RSERVE_REG5 0xFF
+
+/* INT_STS Register field definitions */
+#define RK806_INT_STS_PWRON_FALL BIT(0)
+#define RK806_INT_STS_PWRON_RISE BIT(1)
+#define RK806_INT_STS_PWRON BIT(2)
+#define RK806_INT_STS_PWRON_LP BIT(3)
+#define RK806_INT_STS_HOTDIE BIT(4)
+#define RK806_INT_STS_VDC_RISE BIT(5)
+#define RK806_INT_STS_VDC_FALL BIT(6)
+#define RK806_INT_STS_VB_LO BIT(7)
+#define RK806_INT_STS_REV0 BIT(0)
+#define RK806_INT_STS_REV1 BIT(1)
+#define RK806_INT_STS_REV2 BIT(2)
+#define RK806_INT_STS_CRC_ERROR BIT(3)
+#define RK806_INT_STS_SLP3_GPIO BIT(4)
+#define RK806_INT_STS_SLP2_GPIO BIT(5)
+#define RK806_INT_STS_SLP1_GPIO BIT(6)
+#define RK806_INT_STS_WDT BIT(7)
+
+/* SPI command */
+#define RK806_CMD_READ 0
+#define RK806_CMD_WRITE BIT(7)
+#define RK806_CMD_CRC_EN BIT(6)
+#define RK806_CMD_CRC_DIS 0
+#define RK806_CMD_LEN_MSK 0x0f
+#define RK806_REG_H 0x00
+
+#define VERSION_AB 0x01
+
+enum rk806_reg_id {
+ RK806_ID_DCDC1 = 0,
+ RK806_ID_DCDC2,
+ RK806_ID_DCDC3,
+ RK806_ID_DCDC4,
+ RK806_ID_DCDC5,
+ RK806_ID_DCDC6,
+ RK806_ID_DCDC7,
+ RK806_ID_DCDC8,
+ RK806_ID_DCDC9,
+ RK806_ID_DCDC10,
+
+ RK806_ID_NLDO1,
+ RK806_ID_NLDO2,
+ RK806_ID_NLDO3,
+ RK806_ID_NLDO4,
+ RK806_ID_NLDO5,
+
+ RK806_ID_PLDO1,
+ RK806_ID_PLDO2,
+ RK806_ID_PLDO3,
+ RK806_ID_PLDO4,
+ RK806_ID_PLDO5,
+ RK806_ID_PLDO6,
+ RK806_ID_END,
+};
+
+/* Define the RK806 IRQ numbers */
+enum rk806_irqs {
+ /* INT_STS0 registers */
+ RK806_IRQ_PWRON_FALL,
+ RK806_IRQ_PWRON_RISE,
+ RK806_IRQ_PWRON,
+ RK806_IRQ_PWRON_LP,
+ RK806_IRQ_HOTDIE,
+ RK806_IRQ_VDC_RISE,
+ RK806_IRQ_VDC_FALL,
+ RK806_IRQ_VB_LO,
+
+ /* INT_STS0 registers */
+ RK806_IRQ_REV0,
+ RK806_IRQ_REV1,
+ RK806_IRQ_REV2,
+ RK806_IRQ_CRC_ERROR,
+ RK806_IRQ_SLP3_GPIO,
+ RK806_IRQ_SLP2_GPIO,
+ RK806_IRQ_SLP1_GPIO,
+ RK806_IRQ_WDT,
+};
+
+/* VCC1 Low Voltage Threshold */
+enum rk806_lv_sel {
+ VB_LO_SEL_2800,
+ VB_LO_SEL_2900,
+ VB_LO_SEL_3000,
+ VB_LO_SEL_3100,
+ VB_LO_SEL_3200,
+ VB_LO_SEL_3300,
+ VB_LO_SEL_3400,
+ VB_LO_SEL_3500,
+};
+
+/* System Shutdown Voltage Select */
+enum rk806_uv_sel {
+ VB_UV_SEL_2700,
+ VB_UV_SEL_2800,
+ VB_UV_SEL_2900,
+ VB_UV_SEL_3000,
+ VB_UV_SEL_3100,
+ VB_UV_SEL_3200,
+ VB_UV_SEL_3300,
+ VB_UV_SEL_3400,
+};
+
+/* Pin Function */
+enum rk806_pwrctrl_fun {
+ PWRCTRL_NULL_FUN,
+ PWRCTRL_SLP_FUN,
+ PWRCTRL_POWOFF_FUN,
+ PWRCTRL_RST_FUN,
+ PWRCTRL_DVS_FUN,
+ PWRCTRL_GPIO_FUN,
+};
+
+/* Pin Polarity */
+enum rk806_pin_level {
+ POL_LOW,
+ POL_HIGH,
+};
+
+enum rk806_vsel_ctr_sel {
+ CTR_BY_NO_EFFECT,
+ CTR_BY_PWRCTRL1,
+ CTR_BY_PWRCTRL2,
+ CTR_BY_PWRCTRL3,
+};
+
+enum rk806_dvs_ctr_sel {
+ CTR_SEL_NO_EFFECT,
+ CTR_SEL_DVS_START1,
+ CTR_SEL_DVS_START2,
+ CTR_SEL_DVS_START3,
+};
+
+enum rk806_pin_dr_sel {
+ RK806_PIN_INPUT,
+ RK806_PIN_OUTPUT,
+};
+
+#define RK806_INT_POL_MSK BIT(1)
+#define RK806_INT_POL_H BIT(1)
+#define RK806_INT_POL_L 0
+
+#define RK806_SLAVE_RESTART_FUN_MSK BIT(1)
+#define RK806_SLAVE_RESTART_FUN_EN BIT(1)
+#define RK806_SLAVE_RESTART_FUN_OFF 0
+
+#define RK806_SYS_ENB2_2M_MSK BIT(1)
+#define RK806_SYS_ENB2_2M_EN BIT(1)
+#define RK806_SYS_ENB2_2M_OFF 0
+
+enum rk806_int_fun {
+ RK806_INT_ONLY,
+ RK806_INT_ADN_WKUP,
+};
+
+enum rk806_dvs_mode {
+ RK806_DVS_NOT_SUPPORT,
+ RK806_DVS_START1,
+ RK806_DVS_START2,
+ RK806_DVS_START3,
+ RK806_DVS_PWRCTRL1,
+ RK806_DVS_PWRCTRL2,
+ RK806_DVS_PWRCTRL3,
+ RK806_DVS_START_PWRCTR1,
+ RK806_DVS_START_PWRCTR2,
+ RK806_DVS_START_PWRCTR3,
+ RK806_DVS_END,
+};
+
/* RK808 IRQ Definitions */
#define RK808_IRQ_VOUT_LO 0
#define RK808_IRQ_VB_LO 1
@@ -780,6 +1188,7 @@ enum {
enum {
RK805_ID = 0x8050,
+ RK806_ID = 0x8060,
RK808_ID = 0x0000,
RK809_ID = 0x8090,
RK817_ID = 0x8170,