mbox series

[v6,0/3] Add support for qcm6490 idp and qcs6490 rb3gen2 board

Message ID 20231124121305.1954-1-quic_kbajaj@quicinc.com
Headers show
Series Add support for qcm6490 idp and qcs6490 rb3gen2 board | expand

Message

Komal Bajaj Nov. 24, 2023, 12:13 p.m. UTC 
This series adds the dt-binding and base devicetree files for
QCM6490 IDP based off QCM6490 SoC derived from SC7280 meant for
various form factor including IoT and QCS6490 RB3Gen2 based
off QCS6490 SoC derivative of QCM6490 without internal modem.
See more at:
https://www.qualcomm.com/content/dam/qcomm-martech/dm-assets/documents/qcs-qcm6490-soc-product-brief_87-28733-1-b.pdf

----
Changes from v5:
* Added vph-pwr-regulator node and regulator supply
* Added the voltage range for ldo7 and ldo9 and removed regulator allowed modes for rb3gen2 board
* Link to v5: https://lore.kernel.org/linux-arm-msm/20231120134754.9526-1-quic_kbajaj@quicinc.com/

Changes from v4:
* Described the usecases for gpio-reserved-ranges
* Added reviewed tag by Konrad in p2 and p3
* Link to v4: https://lore.kernel.org/linux-arm-msm/20231117125056.32503-1-quic_kbajaj@quicinc.com/

Changes from v3:
* Removed qcm6490.dtsi file and moved all the contents to board file instead
* Introducing QCS6490-RB3Gen2 board
* Link to v3: https://lore.kernel.org/linux-arm-msm/20231003175456.14774-1-quic_kbajaj@quicinc.com/

Changes from v2:
* Sorted nodes alphabetically
* Link to v2: https://lore.kernel.org/all/20231003055655.30994-1-quic_kbajaj@quicinc.com/

Changes from v1:
* Dropped suffix platform from model name
* Removed few nodes as they were identical to ones in sc7280
* Specified regulator-initial-mode property to vregs
* Dropped deletion of lpass and swr nodes
* Link to v1: https://lore.kernel.org/lkml/20230928133312.11371-1-quic_kbajaj@quicinc.com/

Komal Bajaj (3):
  dt-bindings: arm: qcom: Add QCM6490 IDP and QCS6490 RB3Gen2 board
  arm64: dts: qcom: Add base qcm6490 idp board dts
  arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts

 .../devicetree/bindings/arm/qcom.yaml         |   2 +
 arch/arm64/boot/dts/qcom/Makefile             |   2 +
 arch/arm64/boot/dts/qcom/qcm6490-idp.dts      | 464 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts  | 452 +++++++++++++++++
 4 files changed, 920 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts

--
2.42.0

Comments

Caleb Connolly Nov. 24, 2023, 9:51 p.m. UTC | #1 
On 24/11/2023 12:13, Komal Bajaj wrote:
> Add DTS for Qualcomm qcs6490-rb3gen2 board which uses
> QCS6490 SoC. This adds debug uart and usb support along
> with regulators found on this board.
> 
> Co-developed-by: Naina Mehta <quic_nainmeht@quicinc.com>
> Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/Makefile            |   1 +
>   arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 452 +++++++++++++++++++
>   2 files changed, 453 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 77babebe4904..4c0f9e4a2e5b 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -90,6 +90,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-fairphone-fp5.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-idp.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> new file mode 100644
> index 000000000000..0beab54c051e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> @@ -0,0 +1,452 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +/* PM7250B is configured to use SID8/9 */
> +#define PM7250B_SID 8
> +#define PM7250B_SID1 9
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sc7280.dtsi"
> +#include "pm7250b.dtsi"
> +#include "pm7325.dtsi"
> +#include "pm8350c.dtsi"
> +#include "pmk8350.dtsi"
> +
> +/delete-node/ &ipa_fw_mem;
> +/delete-node/ &remoteproc_mpss;
> +/delete-node/ &rmtfs_mem;
> +/delete-node/ &video_mem;
> +/delete-node/ &wlan_ce_mem;
> +/delete-node/ &xbl_mem;
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. Robotics RB3gen2";
> +	compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490";
> +	chassis-type = "embedded";
> +
> +	aliases {
> +		serial0 = &uart5;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	reserved-memory {
> +		xbl_mem: xbl@80700000 {
> +			reg = <0x0 0x80700000 0x0 0x100000>;
> +			no-map;
> +		};
> +
> +		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
> +			reg = <0x0 0x81800000 0x0 0x1e00000>;
> +			no-map;
> +		};
> +
> +		camera_mem: camera@84300000 {
> +			reg = <0x0 0x84300000 0x0 0x500000>;
> +			no-map;
> +		};
> +
> +		wpss_mem: wpss@84800000 {
> +			reg = <0x0 0x84800000 0x0 0x1900000>;
> +			no-map;
> +		};
> +
> +		adsp_mem: adsp@86100000 {
> +			reg = <0x0 0x86100000 0x0 0x2800000>;
> +			no-map;
> +		};
> +
> +		cdsp_mem: cdsp@88900000 {
> +			reg = <0x0 0x88900000 0x0 0x1e00000>;
> +			no-map;
> +		};
> +
> +		video_mem: video@8a700000 {
> +			reg = <0x0 0x8a700000 0x0 0x700000>;
> +			no-map;
> +		};
> +
> +		cvp_mem: cvp@8ae00000 {
> +			reg = <0x0 0x8ae00000 0x0 0x500000>;
> +			no-map;
> +		};
> +
> +		ipa_fw_mem: ipa-fw@8b300000 {
> +			reg = <0x0 0x8b300000 0x0 0x10000>;
> +			no-map;
> +		};
> +
> +		ipa_gsi_mem: ipa-gsi@8b310000 {
> +			reg = <0x0 0x8b310000 0x0 0xa000>;
> +			no-map;
> +		};
> +
> +		gpu_microcode_mem: gpu-microcode@8b31a000 {
> +			reg = <0x0 0x8b31a000 0x0 0x2000>;
> +			no-map;
> +		};
> +
> +		tz_stat_mem: tz-stat@c0000000 {
> +			reg = <0x0 0xc0000000 0x0 0x100000>;
> +			no-map;
> +		};
> +
> +		tags_mem: tags@c0100000 {
> +			reg = <0x0 0xc0100000 0x0 0x1200000>;
> +			no-map;
> +		};
> +
> +		qtee_mem: qtee@c1300000 {
> +			reg = <0x0 0xc1300000 0x0 0x500000>;
> +			no-map;
> +		};
> +
> +		trusted_apps_mem: trusted_apps@c1800000 {
> +			reg = <0x0 0xc1800000 0x0 0x1c00000>;
> +			no-map;
> +		};
> +
> +		debug_vm_mem: debug-vm@d0600000 {
> +			reg = <0x0 0xd0600000 0x0 0x100000>;
> +			no-map;
> +		};
> +	};
> +
> +	vph_pwr: vph-pwr-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vph_pwr";
> +		regulator-min-microvolt = <2500000>;
> +		regulator-max-microvolt = <4350000>;
> +	};
> +};
> +
> +&apps_rsc {
> +	regulators-0 {
> +		compatible = "qcom,pm7325-rpmh-regulators";
> +		qcom,pmic-id = "b";
> +
> +		vdd-s1-supply = <&vph_pwr>;
> +		vdd-s2-supply = <&vph_pwr>;
> +		vdd-s3-supply = <&vph_pwr>;
> +		vdd-s4-supply = <&vph_pwr>;
> +		vdd-s5-supply = <&vph_pwr>;
> +		vdd-s6-supply = <&vph_pwr>;
> +		vdd-s7-supply = <&vph_pwr>;
> +		vdd-s8-supply = <&vph_pwr>;
> +		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
> +		vdd-l2-l7-supply = <&vreg_bob_3p296>;
> +		vdd-l3-supply = <&vreg_s2b_0p876>;
> +		vdd-l5-supply = <&vreg_s2b_0p876>;
> +		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
> +		vdd-l8-supply = <&vreg_s7b_0p972>;
> +		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
> +		vdd-l13-supply = <&vreg_s7b_0p972>;
> +		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
> +
> +		vreg_s1b_1p872: smps1 {
> +			regulator-min-microvolt = <1840000>;
> +			regulator-max-microvolt = <2040000>;
> +		};
> +
> +		vreg_s2b_0p876: smps2 {
> +			regulator-min-microvolt = <570070>;
> +			regulator-max-microvolt = <1050000>;
> +		};
> +
> +		vreg_s7b_0p972: smps7 {
> +			regulator-min-microvolt = <535000>;
> +			regulator-max-microvolt = <1120000>;
> +		};
> +
> +		vreg_s8b_1p272: smps8 {
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1500000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
> +		};
> +
> +		vreg_l1b_0p912: ldo1 {
> +			regulator-min-microvolt = <825000>;
> +			regulator-max-microvolt = <925000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l2b_3p072: ldo2 {
> +			regulator-min-microvolt = <2700000>;
> +			regulator-max-microvolt = <3544000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l3b_0p504: ldo3 {
> +			regulator-min-microvolt = <312000>;
> +			regulator-max-microvolt = <910000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l4b_0p752: ldo4 {
> +			regulator-min-microvolt = <752000>;
> +			regulator-max-microvolt = <820000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		reg_l5b_0p752: ldo5 {
> +			regulator-min-microvolt = <552000>;
> +			regulator-max-microvolt = <832000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l6b_1p2: ldo6 {
> +			regulator-min-microvolt = <1140000>;
> +			regulator-max-microvolt = <1260000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l7b_2p952: ldo7 {
> +			regulator-min-microvolt = <2400000>;
> +			regulator-max-microvolt = <3544000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l8b_0p904: ldo8 {
> +			regulator-min-microvolt = <870000>;
> +			regulator-max-microvolt = <970000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l9b_1p2: ldo9 {
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1304000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l11b_1p504: ldo11 {
> +			regulator-min-microvolt = <1504000>;
> +			regulator-max-microvolt = <2000000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l12b_0p751: ldo12 {
> +			regulator-min-microvolt = <751000>;
> +			regulator-max-microvolt = <824000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l13b_0p53: ldo13 {
> +			regulator-min-microvolt = <530000>;
> +			regulator-max-microvolt = <824000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l14b_1p08: ldo14 {
> +			regulator-min-microvolt = <1080000>;
> +			regulator-max-microvolt = <1304000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l15b_0p765: ldo15 {
> +			regulator-min-microvolt = <765000>;
> +			regulator-max-microvolt = <1020000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l16b_1p1: ldo16 {
> +			regulator-min-microvolt = <1100000>;
> +			regulator-max-microvolt = <1300000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l17b_1p7: ldo17 {
> +			regulator-min-microvolt = <1700000>;
> +			regulator-max-microvolt = <1900000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l18b_1p8: ldo18 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <2000000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l19b_1p8: ldo19 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <2000000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
> +
> +	regulators-1 {
> +		compatible = "qcom,pm8350c-rpmh-regulators";
> +		qcom,pmic-id = "c";
> +
> +		vdd-s1-supply = <&vph_pwr>;
> +		vdd-s2-supply = <&vph_pwr>;
> +		vdd-s3-supply = <&vph_pwr>;
> +		vdd-s4-supply = <&vph_pwr>;
> +		vdd-s5-supply = <&vph_pwr>;
> +		vdd-s6-supply = <&vph_pwr>;
> +		vdd-s7-supply = <&vph_pwr>;
> +		vdd-s8-supply = <&vph_pwr>;
> +		vdd-s9-supply = <&vph_pwr>;
> +		vdd-s10-supply = <&vph_pwr>;
> +		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
> +		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
> +		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
> +		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
> +		vdd-l10-supply = <&vreg_s7b_0p972>;
> +		vdd-bob-supply = <&vph_pwr>;
> +
> +		vreg_s1c_2p19: smps1 {
> +			regulator-min-microvolt = <2190000>;
> +			regulator-max-microvolt = <2210000>;
> +		};
> +
> +		vreg_s2c_0p752: smps2 {
> +			regulator-min-microvolt = <750000>;
> +			regulator-max-microvolt = <800000>;
> +		};
> +
> +		vreg_s5c_0p752: smps5 {
> +			regulator-min-microvolt = <465000>;
> +			regulator-max-microvolt = <1050000>;
> +		};
> +
> +		vreg_s7c_0p752: smps7 {
> +			regulator-min-microvolt = <465000>;
> +			regulator-max-microvolt = <800000>;
> +		};
> +
> +		vreg_s9c_1p084: smps9 {
> +			regulator-min-microvolt = <1010000>;
> +			regulator-max-microvolt = <1170000>;
> +		};
> +
> +		vreg_l1c_1p8: ldo1 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1980000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l2c_1p62: ldo2 {
> +			regulator-min-microvolt = <1620000>;
> +			regulator-max-microvolt = <1980000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l3c_2p8: ldo3 {
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <3540000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l4c_1p62: ldo4 {
> +			regulator-min-microvolt = <1620000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l5c_1p62: ldo5 {
> +			regulator-min-microvolt = <1620000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l6c_2p96: ldo6 {
> +			regulator-min-microvolt = <1650000>;
> +			regulator-max-microvolt = <3544000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l7c_3p0: ldo7 {
> +			regulator-min-microvolt = <3000000>;
> +			regulator-max-microvolt = <3544000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l8c_1p62: ldo8 {
> +			regulator-min-microvolt = <1620000>;
> +			regulator-max-microvolt = <2000000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l9c_2p96: ldo9 {
> +			regulator-min-microvolt = <2700000>;
> +			regulator-max-microvolt = <35440000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l10c_0p88: ldo10 {
> +			regulator-min-microvolt = <720000>;
> +			regulator-max-microvolt = <1050000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l11c_2p8: ldo11 {
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <3544000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l12c_1p65: ldo12 {
> +			regulator-min-microvolt = <1650000>;
> +			regulator-max-microvolt = <2000000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l13c_2p7: ldo13 {
> +			regulator-min-microvolt = <2700000>;
> +			regulator-max-microvolt = <3544000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_bob_3p296: bob {
> +			regulator-min-microvolt = <3008000>;
> +			regulator-max-microvolt = <3960000>;
> +		};
> +	};
> +};
> +
> +&qupv3_id_0 {
> +	status = "okay";
> +};
> +
> +&tlmm {
> +	gpio-reserved-ranges = <32 2>, /* ADSP */
> +			       <48 4>; /* NFC */
> +};
> +
> +&uart5 {
> +	compatible = "qcom,geni-debug-uart";
> +	status = "okay";
> +};
> +
> +&usb_1 {
> +	status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> +	dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> +	vdda-pll-supply = <&vreg_l10c_0p88>;
> +	vdda33-supply = <&vreg_l2b_3p072>;
> +	vdda18-supply = <&vreg_l1c_1p8>;
> +
> +	status = "okay";
> +};
> +
> +&usb_1_qmpphy {
> +	vdda-phy-supply = <&vreg_l6b_1p2>;
> +	vdda-pll-supply = <&vreg_l1b_0p912>;
> +
> +	status = "okay";
> +};
> +
> +&wifi {
> +	memory-region = <&wlan_fw_mem>;
> +};
> --
> 2.42.0
> 
>