| Message ID | 20231017125848.84311-1-raymondhackley@protonmail.com |
|---|---|
| State | Accepted |
| Commit | 50891bc7f1e9e65fa260c442efa7fa24b3523c96 |
| Headers | show |
| Series | arm64: dts: qcom: msm8916-acer-a1-724: Add notification LED | expand |
On Tue, 17 Oct 2023 13:00:11 +0000, Raymond Hackley wrote: > Acer Iconia Talk S A1-724 uses KTD2026 LED driver. However, there is > no blue LED on it. Add it to the device tree. > > Applied, thanks! [1/1] arm64: dts: qcom: msm8916-acer-a1-724: Add notification LED commit: 50891bc7f1e9e65fa260c442efa7fa24b3523c96 Best regards,
diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index 84723c9b73b4..b0f0f9f59cb3 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> /* * NOTE: The original firmware from Acer can only boot 32-bit kernels. @@ -83,6 +84,29 @@ magnetometer@12 { }; }; +&blsp_i2c4 { + status = "okay"; + + led-controller@30 { + compatible = "kinetic,ktd2026"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + }; +}; + &blsp_i2c5 { status = "okay";
Acer Iconia Talk S A1-724 uses KTD2026 LED driver. However, there is no blue LED on it. Add it to the device tree. Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com> --- .../boot/dts/qcom/msm8916-acer-a1-724.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)