| Message ID | 20231025115620.905538-1-dmitry.baryshkov@linaro.org |
|---|---|
| Headers | show |
| Series | usb: typec: ucsi: add workaround for several Qualcomm platforms | expand |
On Wed, Oct 25, 2023 at 02:49:29PM +0300, Dmitry Baryshkov wrote: > On sevral Qualcomm platforms (SC8180X, SM8350, SC8280XP) a call to > UCSI_GET_PDOS for non-PD partners will cause a firmware crash with no > easy way to recover from it. Since we have no easy way to determine > whether the partner really has PD support, shortcut UCSI_GET_PDOS on > such platforms. This allows us to enable UCSI support on such devices. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > --- > drivers/usb/typec/ucsi/ucsi.c | 3 +++ > drivers/usb/typec/ucsi/ucsi.h | 3 +++ > drivers/usb/typec/ucsi/ucsi_glink.c | 13 +++++++++++++ > 3 files changed, 19 insertions(+) > > diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c > index 61b64558f96c..5392ec698959 100644 > --- a/drivers/usb/typec/ucsi/ucsi.c > +++ b/drivers/usb/typec/ucsi/ucsi.c > @@ -578,6 +578,9 @@ static int ucsi_read_pdos(struct ucsi_connector *con, > u64 command; > int ret; > > + if (ucsi->quirks & UCSI_NO_PARTNER_PDOS) > + return 0; > + > command = UCSI_COMMAND(UCSI_GET_PDOS) | UCSI_CONNECTOR_NUMBER(con->num); > command |= UCSI_GET_PDOS_PARTNER_PDO(is_partner); > command |= UCSI_GET_PDOS_PDO_OFFSET(offset); > diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h > index 474315a72c77..6478016d5cb8 100644 > --- a/drivers/usb/typec/ucsi/ucsi.h > +++ b/drivers/usb/typec/ucsi/ucsi.h > @@ -317,6 +317,9 @@ struct ucsi { > #define EVENT_PENDING 0 > #define COMMAND_PENDING 1 > #define ACK_PENDING 2 > + > + unsigned long quirks; > +#define UCSI_NO_PARTNER_PDOS BIT(0) /* Don't read partner's PDOs */ > }; > > #define UCSI_MAX_SVID 5 > diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c > index db6e248f8208..a94e2df6fd45 100644 > --- a/drivers/usb/typec/ucsi/ucsi_glink.c > +++ b/drivers/usb/typec/ucsi/ucsi_glink.c > @@ -6,6 +6,7 @@ > #include <linux/auxiliary_bus.h> > #include <linux/module.h> > #include <linux/mutex.h> > +#include <linux/of_device.h> > #include <linux/property.h> > #include <linux/soc/qcom/pdr.h> > #include <linux/usb/typec_mux.h> > @@ -296,11 +297,19 @@ static void pmic_glink_ucsi_destroy(void *data) > mutex_unlock(&ucsi->lock); > } > > +static const struct of_device_id pmic_glink_ucsi_of_quirks[] = { > + { .compatible = "qcom,sc8180x-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, }, > + { .compatible = "qcom,sc8280xp-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, }, > + { .compatible = "qcom,sm8350-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, }, > + {} > +}; > + > static int pmic_glink_ucsi_probe(struct auxiliary_device *adev, > const struct auxiliary_device_id *id) > { > struct pmic_glink_ucsi *ucsi; > struct device *dev = &adev->dev; > + const struct of_device_id *match; > struct fwnode_handle *fwnode; > int ret; > > @@ -327,6 +336,10 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev, > if (ret) > return ret; > > + match = of_match_device(pmic_glink_ucsi_of_quirks, dev->parent); > + if (match) > + ucsi->ucsi->quirks = (unsigned long)match->data; > + > ucsi_set_drvdata(ucsi->ucsi, ucsi); > > device_for_each_child_node(dev, fwnode) { > -- > 2.42.0
On Wed, Oct 25, 2023 at 02:49:28PM +0300, Dmitry Baryshkov wrote: > The UCSI firmware on Qualcomm SC8180X, SC8280XP and SM8350 are buggy. > Submitting UCSI_GET_PDOS command for partners which do not actually > support PD and do not have PDOs causes firmware to crash, preventing > further UCSI activity. Firmware on newer platforms have fixed this > issue. In order to still be able to use UCSI functionality on the > mentioned platforms (e.g. to be able to handle USB role switching), > apply a workaround that completely shortcuts UCSI_GET_PDOS command for > the USB-C partner. > > This has been tested on sm8350 only, but should apply to other > platforms. I did not enable UCSI for sc8180x yet, it has slightly > different implementation, which I'd like to get tested first. Has no one tested this on sc8280xp/x13s before merging? I see a bunch of errors with this series applied to 6.7-rc4: [ 11.999960] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response [ 12.000430] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-110) [ 17.120515] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response [ 17.124204] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) [ 23.264792] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response [ 23.264953] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) Is it just broken or am I missing some undocumented dependency that is only in linux-next? Johan
On Fri, 8 Dec 2023 at 10:39, Johan Hovold <johan@kernel.org> wrote: > > On Wed, Oct 25, 2023 at 02:49:28PM +0300, Dmitry Baryshkov wrote: > > The UCSI firmware on Qualcomm SC8180X, SC8280XP and SM8350 are buggy. > > Submitting UCSI_GET_PDOS command for partners which do not actually > > support PD and do not have PDOs causes firmware to crash, preventing > > further UCSI activity. Firmware on newer platforms have fixed this > > issue. In order to still be able to use UCSI functionality on the > > mentioned platforms (e.g. to be able to handle USB role switching), > > apply a workaround that completely shortcuts UCSI_GET_PDOS command for > > the USB-C partner. > > > > This has been tested on sm8350 only, but should apply to other > > platforms. I did not enable UCSI for sc8180x yet, it has slightly > > different implementation, which I'd like to get tested first. > > Has no one tested this on sc8280xp/x13s before merging? > > I see a bunch of errors with this series applied to 6.7-rc4: > > [ 11.999960] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > [ 12.000430] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-110) > [ 17.120515] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > [ 17.124204] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) > [ 23.264792] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > [ 23.264953] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) Can you please post previous messages or is the first timeout the first error from ucsi? > > Is it just broken or am I missing some undocumented dependency that is > only in linux-next? > > Johan
On Fri, Dec 08, 2023 at 12:58:29PM +0200, Dmitry Baryshkov wrote: > On Fri, 8 Dec 2023 at 10:39, Johan Hovold <johan@kernel.org> wrote: > > > > On Wed, Oct 25, 2023 at 02:49:28PM +0300, Dmitry Baryshkov wrote: > > > The UCSI firmware on Qualcomm SC8180X, SC8280XP and SM8350 are buggy. > > > Submitting UCSI_GET_PDOS command for partners which do not actually > > > support PD and do not have PDOs causes firmware to crash, preventing > > > further UCSI activity. Firmware on newer platforms have fixed this > > > issue. In order to still be able to use UCSI functionality on the > > > mentioned platforms (e.g. to be able to handle USB role switching), > > > apply a workaround that completely shortcuts UCSI_GET_PDOS command for > > > the USB-C partner. > > > > > > This has been tested on sm8350 only, but should apply to other > > > platforms. I did not enable UCSI for sc8180x yet, it has slightly > > > different implementation, which I'd like to get tested first. > > > > Has no one tested this on sc8280xp/x13s before merging? > > > > I see a bunch of errors with this series applied to 6.7-rc4: > > > > [ 11.999960] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > > [ 12.000430] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-110) > > [ 17.120515] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > > [ 17.124204] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) > > [ 23.264792] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > > [ 23.264953] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) > > Can you please post previous messages or is the first timeout the > first error from ucsi? These are all the ucsi messages in the log (dmesg | grep ucsi). The first error is sometimes GET_CONNECTOR_STATUS failed (-95) instead: [ 9.012421] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-95) [ 14.047379] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response [ 14.050708] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) [ 20.192382] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response [ 20.192542] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) I see that one if I boot with only the charger connected, the later -110 timeouts go away if I disconnect my r8152 ethernet adapter. Johan
On Fri, 8 Dec 2023 at 13:09, Johan Hovold <johan@kernel.org> wrote: > > On Fri, Dec 08, 2023 at 12:58:29PM +0200, Dmitry Baryshkov wrote: > > On Fri, 8 Dec 2023 at 10:39, Johan Hovold <johan@kernel.org> wrote: > > > > > > On Wed, Oct 25, 2023 at 02:49:28PM +0300, Dmitry Baryshkov wrote: > > > > The UCSI firmware on Qualcomm SC8180X, SC8280XP and SM8350 are buggy. > > > > Submitting UCSI_GET_PDOS command for partners which do not actually > > > > support PD and do not have PDOs causes firmware to crash, preventing > > > > further UCSI activity. Firmware on newer platforms have fixed this > > > > issue. In order to still be able to use UCSI functionality on the > > > > mentioned platforms (e.g. to be able to handle USB role switching), > > > > apply a workaround that completely shortcuts UCSI_GET_PDOS command for > > > > the USB-C partner. > > > > > > > > This has been tested on sm8350 only, but should apply to other > > > > platforms. I did not enable UCSI for sc8180x yet, it has slightly > > > > different implementation, which I'd like to get tested first. > > > > > > Has no one tested this on sc8280xp/x13s before merging? > > > > > > I see a bunch of errors with this series applied to 6.7-rc4: > > > > > > [ 11.999960] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > > > [ 12.000430] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-110) > > > [ 17.120515] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > > > [ 17.124204] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) > > > [ 23.264792] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > > > [ 23.264953] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) > > > > Can you please post previous messages or is the first timeout the > > first error from ucsi? > > These are all the ucsi messages in the log (dmesg | grep ucsi). > > The first error is sometimes GET_CONNECTOR_STATUS failed (-95) instead: Ack, thank you. This is pending on my side together with the UCSI glink / altmode rework. I hope to have patches for that closer to the NY. > > [ 9.012421] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-95) > [ 14.047379] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > [ 14.050708] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) > [ 20.192382] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > [ 20.192542] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) > > I see that one if I boot with only the charger connected, the later -110 > timeouts go away if I disconnect my r8152 ethernet adapter. > > Johan
On Fri, Dec 08, 2023 at 01:10:59PM +0200, Dmitry Baryshkov wrote: > On Fri, 8 Dec 2023 at 13:09, Johan Hovold <johan@kernel.org> wrote: > > On Fri, Dec 08, 2023 at 12:58:29PM +0200, Dmitry Baryshkov wrote: > > > On Fri, 8 Dec 2023 at 10:39, Johan Hovold <johan@kernel.org> wrote: > > > > On Wed, Oct 25, 2023 at 02:49:28PM +0300, Dmitry Baryshkov wrote: > > > > > The UCSI firmware on Qualcomm SC8180X, SC8280XP and SM8350 are buggy. > > > > > Submitting UCSI_GET_PDOS command for partners which do not actually > > > > > support PD and do not have PDOs causes firmware to crash, preventing > > > > > further UCSI activity. Firmware on newer platforms have fixed this > > > > > issue. In order to still be able to use UCSI functionality on the > > > > > mentioned platforms (e.g. to be able to handle USB role switching), > > > > > apply a workaround that completely shortcuts UCSI_GET_PDOS command for > > > > > the USB-C partner. > > > > > > > > > > This has been tested on sm8350 only, but should apply to other > > > > > platforms. I did not enable UCSI for sc8180x yet, it has slightly > > > > > different implementation, which I'd like to get tested first. > > > > > > > > Has no one tested this on sc8280xp/x13s before merging? > > > > > > > > I see a bunch of errors with this series applied to 6.7-rc4: > > > > > > > > [ 11.999960] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > > > > [ 12.000430] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-110) > > > > [ 17.120515] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > > > > [ 17.124204] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) > > > > [ 23.264792] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > > > > [ 23.264953] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) > > > > > > Can you please post previous messages or is the first timeout the > > > first error from ucsi? > > > > These are all the ucsi messages in the log (dmesg | grep ucsi). > > > > The first error is sometimes GET_CONNECTOR_STATUS failed (-95) instead: > > Ack, thank you. This is pending on my side together with the UCSI > glink / altmode rework. I hope to have patches for that closer to the > NY. What does that mean? That we shall revert these patches until that work is finished? I don't want to have these errors littering the logs, scaring users and possibly slowing down boot (those are five second timeouts). Also, if this was known issue, why wasn't it mentioned the cover letter or commit messages? Johan
On Fri, 8 Dec 2023 at 13:47, Johan Hovold <johan@kernel.org> wrote: > > On Fri, Dec 08, 2023 at 01:10:59PM +0200, Dmitry Baryshkov wrote: > > On Fri, 8 Dec 2023 at 13:09, Johan Hovold <johan@kernel.org> wrote: > > > On Fri, Dec 08, 2023 at 12:58:29PM +0200, Dmitry Baryshkov wrote: > > > > On Fri, 8 Dec 2023 at 10:39, Johan Hovold <johan@kernel.org> wrote: > > > > > On Wed, Oct 25, 2023 at 02:49:28PM +0300, Dmitry Baryshkov wrote: > > > > > > The UCSI firmware on Qualcomm SC8180X, SC8280XP and SM8350 are buggy. > > > > > > Submitting UCSI_GET_PDOS command for partners which do not actually > > > > > > support PD and do not have PDOs causes firmware to crash, preventing > > > > > > further UCSI activity. Firmware on newer platforms have fixed this > > > > > > issue. In order to still be able to use UCSI functionality on the > > > > > > mentioned platforms (e.g. to be able to handle USB role switching), > > > > > > apply a workaround that completely shortcuts UCSI_GET_PDOS command for > > > > > > the USB-C partner. > > > > > > > > > > > > This has been tested on sm8350 only, but should apply to other > > > > > > platforms. I did not enable UCSI for sc8180x yet, it has slightly > > > > > > different implementation, which I'd like to get tested first. > > > > > > > > > > Has no one tested this on sc8280xp/x13s before merging? > > > > > > > > > > I see a bunch of errors with this series applied to 6.7-rc4: > > > > > > > > > > [ 11.999960] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > > > > > [ 12.000430] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-110) > > > > > [ 17.120515] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > > > > > [ 17.124204] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) > > > > > [ 23.264792] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: timeout waiting for UCSI sync write response > > > > > [ 23.264953] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: GET_CONNECTOR_STATUS failed (-110) > > > > > > > > Can you please post previous messages or is the first timeout the > > > > first error from ucsi? > > > > > > These are all the ucsi messages in the log (dmesg | grep ucsi). > > > > > > The first error is sometimes GET_CONNECTOR_STATUS failed (-95) instead: > > > > Ack, thank you. This is pending on my side together with the UCSI > > glink / altmode rework. I hope to have patches for that closer to the > > NY. > > What does that mean? That we shall revert these patches until that work > is finished? I don't want to have these errors littering the logs, > scaring users and possibly slowing down boot (those are five second > timeouts). Just send a patch disabling ucsi for sc8280xp. > > Also, if this was known issue, why wasn't it mentioned the cover letter > or commit messages? Surely it was not the known issue, otherwise I would not have sent the series.
On Fri, Dec 08, 2023 at 02:16:27PM +0200, Dmitry Baryshkov wrote: > On Fri, 8 Dec 2023 at 13:47, Johan Hovold <johan@kernel.org> wrote: > > On Fri, Dec 08, 2023 at 01:10:59PM +0200, Dmitry Baryshkov wrote: > > > On Fri, 8 Dec 2023 at 13:09, Johan Hovold <johan@kernel.org> wrote: > > > > The first error is sometimes GET_CONNECTOR_STATUS failed (-95) instead: > > > > > > Ack, thank you. This is pending on my side together with the UCSI > > > glink / altmode rework. I hope to have patches for that closer to the > > > NY. > > > > What does that mean? That we shall revert these patches until that work > > is finished? I don't want to have these errors littering the logs, > > scaring users and possibly slowing down boot (those are five second > > timeouts). > > Just send a patch disabling ucsi for sc8280xp. Ok, will do. Looks like that is indeed the only platform besides sc8180x which had not yet been tested. > > Also, if this was known issue, why wasn't it mentioned the cover letter > > or commit messages? > > Surely it was not the known issue, otherwise I would not have sent the series. Ah, sorry, I misunderstood you then. Johan
On Fri, 8 Dec 2023 at 14:25, Johan Hovold <johan@kernel.org> wrote: > > On Fri, Dec 08, 2023 at 02:16:27PM +0200, Dmitry Baryshkov wrote: > > On Fri, 8 Dec 2023 at 13:47, Johan Hovold <johan@kernel.org> wrote: > > > On Fri, Dec 08, 2023 at 01:10:59PM +0200, Dmitry Baryshkov wrote: > > > > On Fri, 8 Dec 2023 at 13:09, Johan Hovold <johan@kernel.org> wrote: > > > > > > The first error is sometimes GET_CONNECTOR_STATUS failed (-95) instead: > > > > > > > > Ack, thank you. This is pending on my side together with the UCSI > > > > glink / altmode rework. I hope to have patches for that closer to the > > > > NY. > > > > > > What does that mean? That we shall revert these patches until that work > > > is finished? I don't want to have these errors littering the logs, > > > scaring users and possibly slowing down boot (those are five second > > > timeouts). > > > > Just send a patch disabling ucsi for sc8280xp. > > Ok, will do. > > Looks like that is indeed the only platform besides sc8180x which had > not yet been tested. And it has its own peculiarities which I didn't observe on other platforms. > > > > Also, if this was known issue, why wasn't it mentioned the cover letter > > > or commit messages? > > > > Surely it was not the known issue, otherwise I would not have sent the series. > > Ah, sorry, I misunderstood you then. No problem :-)
On Wed, 25 Oct 2023 14:49:28 +0300, Dmitry Baryshkov wrote: > The UCSI firmware on Qualcomm SC8180X, SC8280XP and SM8350 are buggy. > Submitting UCSI_GET_PDOS command for partners which do not actually > support PD and do not have PDOs causes firmware to crash, preventing > further UCSI activity. Firmware on newer platforms have fixed this > issue. In order to still be able to use UCSI functionality on the > mentioned platforms (e.g. to be able to handle USB role switching), > apply a workaround that completely shortcuts UCSI_GET_PDOS command for > the USB-C partner. > > [...] Applied, thanks! [1/2] usb: typec: ucsi: fix UCSI on buggy Qualcomm devices commit: 1d103d6af241dbfc7e11eb9a46dff65db257a37f [2/2] soc: qcom: pmic_glink: enable UCSI by default commit: 4db09e7b967b905ba3036a4d96e81c06b896b1bf Best regards,