new file mode 100644
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,display-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive JH7110 Soc Display SubSystem
+
+maintainers:
+ - Keith Zhao <keith.zhao@starfivetech.com>
+ - ShengYang Chen <shengyang.chen@starfivetech.com>
+
+description:
+ This is the bindings documentation for the JH7110 Soc Display Subsystem that
+ includes front-end video data capture, display controller and display
+ interface. such as HDMI and MIPI.
+
+ JH7110 display pipeline have several components as below description,
+ multi display controllers and corresponding physical interfaces.
+ For different display scenarios, pipe0 and pipe1 maybe binding to different
+ encoder. for example,
+
+ pipe0 binding to HDMI for primary display,
+ pipe1 binding to DSI for external display.
+
+ +------------------------------+
+ | |
+ | |
+ +----+ | +-------------------+ | +-------+ +------+ +------+
+ | +----->+ dc controller 0 +--->----->+HDMICtl| ->+ PHY +-->+PANEL0+
+ |AXI | | +-------------------+ | +-------+ +------+ +------+
+ | | | |
+ | | | |
+ | | | |
+ | | | |
+ |APB | | +-------------------+ +---------+ +------+ +-------+
+ | +----->+ dc controller 1 +--->---->+ dsiTx +--->+DPHY +->+ PANEL1+
+ | | | +-------------------+ +---------+ +------+ +-------+
+ +----+ | |
+ +------------------------------+
+
+
+properties:
+ compatible:
+ const: starfive,display-subsystem
+
+ clocks:
+ items:
+ - description: Clock for display system noc bus.
+ - description: Core clock for display controller.
+ - description: Clock for axi bus to access ddr.
+ - description: Clock for ahb bus to R/W the phy regs.
+
+ clock-names:
+ items:
+ - const: noc_bus
+ - const: dc_core
+ - const: axi_core
+ - const: ahb
+
+ resets:
+ items:
+ - description: Reset for axi bus.
+ - description: Reset for ahb bus.
+ - description: Core reset of display controller.
+
+ reset-names:
+ items:
+ - const: axi
+ - const: ahb
+ - const: core
+
+ ports:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description:
+ Should contain a list of phandles pointing to display interface port
+ of dc-controller devices.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ display-subsystem {
+ compatible = "starfive,display-subsystem";
+ ports = <&dc_out>;
+
+ clocks = <&syscrg 60>,
+ <&voutcrg 4>,
+ <&voutcrg 5>,
+ <&voutcrg 6>;
+ clock-names = "noc_bus", "dc_core", "axi_core", "ahb";
+ resets = <&voutcrg 0>, <&voutcrg 1>, <&voutcrg 2>;
+ reset-names = "axi", "ahb", "core";
+ };
new file mode 100644
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,dsi-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: starfive jh7110 soc Encoder
+
+maintainers:
+ - Keith Zhao <keith.zhao@starfivetech.com>
+
+description:
+ Device-Tree bindings for simple encoder.
+ Simple encoder driver only has basic functionality.
+ the hardware of dc8200 has 2 output interface, use
+ syscon to select which one to be used.
+
+properties:
+ compatible:
+ const: starfive,dsi-encoder
+
+ starfive,syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to syscon that select crtc output.
+ - description: Offset of crtc selection
+ - description: Shift of crtc selection
+ description:
+ A phandle to syscon with two arguments that configure select output.
+ The argument one is the offset of crtc selection, the
+ argument two is the shift of crtc selection.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ The first port should be the input coming from the associated dc channel.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ The second port should be the output coming from the associated bridge.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ dssctrl: dssctrl@295b0000 {
+ compatible = "starfive,jh7110-vout-syscon", "syscon";
+ reg = <0x295b0000 0x90>;
+ };
+
+ dsi_encoder: dsi_encoder {
+ compatible = "starfive,dsi-encoder";
+ starfive,syscon = <&dssctrl 0x8 0x12>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* input */
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ dsi_input0:endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dc_out_dpi1>;
+ };
+ };
+ /* output */
+ port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dsi_out:endpoint {
+ remote-endpoint = <&mipi_in>;
+ };
+ };
+ };
+ };
new file mode 100644
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-dc8200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive display controller
+
+description:
+ The StarFive SoC uses the display controller based on Verisilicon IP
+ to transfer the image data from a video memory buffer to an external
+ LCD interface.
+
+maintainers:
+ - Keith Zhao <keith.zhao@starfivetech.com>
+
+properties:
+ compatible:
+ const: starfive,jh7110-dc8200
+
+ reg:
+ minItems: 1
+ items:
+ - description:
+ host interface
+ - description:
+ display physical base address and length.
+
+ interrupts:
+ items:
+ - description: The interrupt will be generated when DC finish one frame
+
+ clocks:
+ items:
+ - description: Pixel clock for display channel 0.
+ - description: Pixel clock for display channel 1.
+ - description: Pixel clock from hdmi.
+ - description: Pixel clock for soc .
+ clock-names:
+ items:
+ - const: channel0
+ - const: channel1
+ - const: hdmi_tx
+ - const: dc_parent
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ channel 0 output
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ channel 1 output
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ dc8200: lcd-controller@29400000 {
+ compatible = "starfive,jh7110-dc8200";
+ reg = <0x29400000 0x100>, <0x29400800 0x2000>;
+ interrupts = <95>;
+ clocks = <&voutcrg 7>,
+ <&voutcrg 8>,
+ <&voutcrg 9>,
+ <&voutcrg 10>;
+ clock-names = "channel0", "channel1","hdmi_tx", "dc_parent";
+
+ crtc_out: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dc_out0: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dc_out_dpi0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_dc>;
+ };
+
+ };
+
+ dc_out1: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dc_out_dpi1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dsi_input0>;
+ };
+
+ };
+ };
+ };
new file mode 100644
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-inno-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive JH7110 HDMI controller
+
+description:
+ The StarFive JH7110 SoC uses the HDMI signal transmiter based on innosilicon IP
+ to generate HDMI signal from its input and transmit the signal to the screen.
+
+maintainers:
+ - Keith Zhao <keith.zhao@starfivetech.com>
+
+properties:
+ compatible:
+ const: "starfive,jh7110-inno-hdmi"
+
+ reg:
+ minItems: 1
+
+ interrupts:
+ items:
+ - description: The HDMI hot plug detection interrupt.
+
+ clocks:
+ items:
+ - description: System clock of HDMI module.
+ - description: Mclk clock of HDMI audio.
+ - description: Bclk clock of HDMI audio.
+
+ clock-names:
+ items:
+ - const: sysclk
+ - const: mclk
+ - const: bclk
+
+ resets:
+ maxItems: 1
+
+ '#sound-dai-cells':
+ const: 0
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Should contain a remote endpoint phandle of display controller device.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - '#sound-dai-cells'
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ hdmi: hdmi@29590000 {
+ compatible = "starfive,jh7110-inno-hdmi";
+ reg = <0x29590000 0x4000>;
+ interrupts = <99>;
+ clocks = <&voutcrg 17>,
+ <&voutcrg 15>,
+ <&voutcrg 16>;
+ clock-names = "sysclk", "mclk","bclk";
+ resets = <&voutcrg 9>;
+ #sound-dai-cells = <0>;
+ hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in_dc: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dc_out_hdmi>;
+ };
+ };
+ };
@@ -24,6 +24,7 @@ properties:
- enum:
- starfive,jh7110-aon-syscon
- starfive,jh7110-stg-syscon
+ - starfive,jh7110-vout-syscon
- const: syscon
reg:
@@ -6881,6 +6881,13 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
F: Documentation/devicetree/bindings/display/ste,mcde.yaml
F: drivers/gpu/drm/mcde/
+DRM DRIVERS FOR STARFIVE
+M: Keith Zhao <keith.zhao@starfivetech.com>
+L: dri-devel@lists.freedesktop.org
+S: Maintained
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/starfive/
+
DRM DRIVER FOR TI DLPC3433 MIPI DSI TO DMD BRIDGE
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
StarFive SoCs JH7110 display system: dc controller, hdmi controller, encoder, vout syscon. add the path of yaml file in MAINTAINERS Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com> --- .../starfive/starfive,display-subsystem.yaml | 104 ++++++++++++++++ .../starfive/starfive,dsi-encoder.yaml | 92 ++++++++++++++ .../starfive/starfive,jh7110-dc8200.yaml | 113 ++++++++++++++++++ .../starfive/starfive,jh7110-inno-hdmi.yaml | 82 +++++++++++++ .../soc/starfive/starfive,jh7110-syscon.yaml | 1 + MAINTAINERS | 7 ++ 6 files changed, 399 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml