diff mbox series

[v3,5/9] i2c: stm32f7: perform I2C_ISR read once at beginning of event isr

Message ID 20231215170617.95868-6-alain.volmat@foss.st.com
State New
Headers show
Series i2c: stm32f7: enhancements and support for stm32mp25 | expand

Commit Message

Alain Volmat Dec. 15, 2023, 5:06 p.m. UTC 
Move readl_relaxed of I2C_ISR register at beginning of event isr
so that it done once for both master & slave handling.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
---
 drivers/i2c/busses/i2c-stm32f7.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

Comments

Wolfram Sang Dec. 22, 2023, 10:45 a.m. UTC | #1 
On Fri, Dec 15, 2023 at 06:06:09PM +0100, Alain Volmat wrote:
> Move readl_relaxed of I2C_ISR register at beginning of event isr
> so that it done once for both master & slave handling.
> 
> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>

Applied to for-next, thanks!
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 15100fed0a3f..f7abf6d3a7b9 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1419,15 +1419,13 @@  static bool stm32f7_i2c_is_slave_busy(struct stm32f7_i2c_dev *i2c_dev)
 	return i == busy;
 }
 
-static irqreturn_t stm32f7_i2c_slave_isr_event(struct stm32f7_i2c_dev *i2c_dev)
+static irqreturn_t stm32f7_i2c_slave_isr_event(struct stm32f7_i2c_dev *i2c_dev, u32 status)
 {
 	void __iomem *base = i2c_dev->base;
-	u32 cr2, status, mask;
+	u32 cr2, mask;
 	u8 val;
 	int ret;
 
-	status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
-
 	/* Slave transmitter mode */
 	if (status & STM32F7_I2C_ISR_TXIS) {
 		i2c_slave_event(i2c_dev->slave_running,
@@ -1531,11 +1529,11 @@  static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
 	u32 status, mask;
 	int ret;
 
-	if (!i2c_dev->master_mode)
-		return stm32f7_i2c_slave_isr_event(i2c_dev);
-
 	status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
 
+	if (!i2c_dev->master_mode)
+		return stm32f7_i2c_slave_isr_event(i2c_dev, status);
+
 	/* NACK received */
 	if (status & STM32F7_I2C_ISR_NACKF) {
 		dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n",