| Message ID | 20231227040401.548977-1-kai.heng.feng@canonical.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] hwmon: (acpi_power_meter) Ensure IPMI space handler is ready on Dell systems | expand |
On Wed, Dec 27, 2023 at 12:04:00PM +0800, Kai-Heng Feng wrote: > The following error can be observed at boot: > [ 3.717920] ACPI Error: No handler for Region [SYSI] (00000000ab9e62c5) [IPMI] (20230628/evregion-130) > [ 3.717928] ACPI Error: Region IPMI (ID=7) has no handler (20230628/exfldio-261) > > [ 3.717936] No Local Variables are initialized for Method [_GHL] > > [ 3.717938] No Arguments are initialized for method [_GHL] > > [ 3.717940] ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20230628/psparse-529) > [ 3.717949] ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20230628/psparse-529) > [ 3.717957] ACPI: \_SB_.PMI0: _PMC evaluation failed: AE_NOT_EXIST > > On Dell systems several methods of acpi_power_meter access variables in > IPMI region [0], so wait until IPMI space handler is installed by > acpi_ipmi and also wait until SMI is selected to make the space handler > fully functional. > > [0] https://www.dell.com/support/manuals/en-us/redhat-enterprise-linux-v8.0/rhel8_rn_pub/advanced-configuration-and-power-interface-acpi-error-messages-displayed-in-dmesg?guid=guid-0d5ae482-1977-42cf-b417-3ed5c3f5ee62 > > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> > --- > v2: > - Use completion instead of request_module(). > > drivers/acpi/acpi_ipmi.c | 13 ++++++++++++- > drivers/hwmon/acpi_power_meter.c | 4 ++++ > include/acpi/acpi_bus.h | 4 ++++ This needs to be split into two patches. > 3 files changed, 20 insertions(+), 1 deletion(-) > > diff --git a/drivers/acpi/acpi_ipmi.c b/drivers/acpi/acpi_ipmi.c > index 0555f68c2dfd..2ea8b7e6cebf 100644 > --- a/drivers/acpi/acpi_ipmi.c > +++ b/drivers/acpi/acpi_ipmi.c > @@ -23,6 +23,8 @@ MODULE_LICENSE("GPL"); > #define IPMI_TIMEOUT (5000) > #define ACPI_IPMI_MAX_MSG_LENGTH 64 > > +static struct completion smi_selected; > + > struct acpi_ipmi_device { > /* the device list attached to driver_data.ipmi_devices */ > struct list_head head; > @@ -463,8 +465,10 @@ static void ipmi_register_bmc(int iface, struct device *dev) > if (temp->handle == handle) > goto err_lock; > } > - if (!driver_data.selected_smi) > + if (!driver_data.selected_smi) { > driver_data.selected_smi = ipmi_device; > + complete(&smi_selected); > + } > list_add_tail(&ipmi_device->head, &driver_data.ipmi_devices); > mutex_unlock(&driver_data.ipmi_lock); > > @@ -578,10 +582,17 @@ acpi_ipmi_space_handler(u32 function, acpi_physical_address address, > return status; > } > > +void wait_for_acpi_ipmi(void) > +{ > + wait_for_completion_interruptible_timeout(&smi_selected, 2 * HZ); wait_for_completion_interruptible_timeout) returns an error code which should be returned to the caller. > +} > +EXPORT_SYMBOL_GPL(wait_for_acpi_ipmi); > + > static int __init acpi_ipmi_init(void) > { > int result; > acpi_status status; > + init_completion(&smi_selected); > > if (acpi_disabled) > return 0; > diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c > index 703666b95bf4..acaf1ae68dc8 100644 > --- a/drivers/hwmon/acpi_power_meter.c > +++ b/drivers/hwmon/acpi_power_meter.c > @@ -883,6 +883,10 @@ static int acpi_power_meter_add(struct acpi_device *device) > strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS); > device->driver_data = resource; > > + if (dmi_match(DMI_SYS_VENDOR, "Dell Inc.") && > + acpi_dev_get_first_match_dev("IPI0001", NULL, -1)) > + wait_for_acpi_ipmi(); wait_for_acpi_ipmi() should return an error code which should be handled here. > + > res = read_capabilities(resource); > if (res) > goto exit_free; > diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h > index 1216d72c650f..ed59fb89721e 100644 > --- a/include/acpi/acpi_bus.h > +++ b/include/acpi/acpi_bus.h > @@ -655,6 +655,7 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s > bool acpi_quirk_skip_acpi_ac_and_battery(void); > int acpi_install_cmos_rtc_space_handler(acpi_handle handle); > void acpi_remove_cmos_rtc_space_handler(acpi_handle handle); > +void wait_for_acpi_ipmi(void); > #else > static inline bool acpi_device_override_status(struct acpi_device *adev, > unsigned long long *status) > @@ -672,6 +673,9 @@ static inline int acpi_install_cmos_rtc_space_handler(acpi_handle handle) > static inline void acpi_remove_cmos_rtc_space_handler(acpi_handle handle) > { > } > +static inline void wait_for_acpi_ipmi(void) > +{ > +} Something with the conditional is wrong. See 0-day report. Guenter > #endif > > #if IS_ENABLED(CONFIG_X86_ANDROID_TABLETS) > -- > 2.34.1 > >
On Thu, Dec 28, 2023 at 5:58 AM Guenter Roeck <linux@roeck-us.net> wrote: > > On Wed, Dec 27, 2023 at 12:04:00PM +0800, Kai-Heng Feng wrote: > > The following error can be observed at boot: > > [ 3.717920] ACPI Error: No handler for Region [SYSI] (00000000ab9e62c5) [IPMI] (20230628/evregion-130) > > [ 3.717928] ACPI Error: Region IPMI (ID=7) has no handler (20230628/exfldio-261) > > > > [ 3.717936] No Local Variables are initialized for Method [_GHL] > > > > [ 3.717938] No Arguments are initialized for method [_GHL] > > > > [ 3.717940] ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20230628/psparse-529) > > [ 3.717949] ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20230628/psparse-529) > > [ 3.717957] ACPI: \_SB_.PMI0: _PMC evaluation failed: AE_NOT_EXIST > > > > On Dell systems several methods of acpi_power_meter access variables in > > IPMI region [0], so wait until IPMI space handler is installed by > > acpi_ipmi and also wait until SMI is selected to make the space handler > > fully functional. > > > > [0] https://www.dell.com/support/manuals/en-us/redhat-enterprise-linux-v8.0/rhel8_rn_pub/advanced-configuration-and-power-interface-acpi-error-messages-displayed-in-dmesg?guid=guid-0d5ae482-1977-42cf-b417-3ed5c3f5ee62 > > > > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> > > --- > > v2: > > - Use completion instead of request_module(). > > > > drivers/acpi/acpi_ipmi.c | 13 ++++++++++++- > > drivers/hwmon/acpi_power_meter.c | 4 ++++ > > include/acpi/acpi_bus.h | 4 ++++ > > This needs to be split into two patches. Will do. > > > 3 files changed, 20 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/acpi/acpi_ipmi.c b/drivers/acpi/acpi_ipmi.c > > index 0555f68c2dfd..2ea8b7e6cebf 100644 > > --- a/drivers/acpi/acpi_ipmi.c > > +++ b/drivers/acpi/acpi_ipmi.c > > @@ -23,6 +23,8 @@ MODULE_LICENSE("GPL"); > > #define IPMI_TIMEOUT (5000) > > #define ACPI_IPMI_MAX_MSG_LENGTH 64 > > > > +static struct completion smi_selected; > > + > > struct acpi_ipmi_device { > > /* the device list attached to driver_data.ipmi_devices */ > > struct list_head head; > > @@ -463,8 +465,10 @@ static void ipmi_register_bmc(int iface, struct device *dev) > > if (temp->handle == handle) > > goto err_lock; > > } > > - if (!driver_data.selected_smi) > > + if (!driver_data.selected_smi) { > > driver_data.selected_smi = ipmi_device; > > + complete(&smi_selected); > > + } > > list_add_tail(&ipmi_device->head, &driver_data.ipmi_devices); > > mutex_unlock(&driver_data.ipmi_lock); > > > > @@ -578,10 +582,17 @@ acpi_ipmi_space_handler(u32 function, acpi_physical_address address, > > return status; > > } > > > > +void wait_for_acpi_ipmi(void) > > +{ > > + wait_for_completion_interruptible_timeout(&smi_selected, 2 * HZ); > > wait_for_completion_interruptible_timeout) returns an error code which > should be returned to the caller. Will do in next revision. > > > +} > > +EXPORT_SYMBOL_GPL(wait_for_acpi_ipmi); > > + > > static int __init acpi_ipmi_init(void) > > { > > int result; > > acpi_status status; > > + init_completion(&smi_selected); > > > > if (acpi_disabled) > > return 0; > > diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c > > index 703666b95bf4..acaf1ae68dc8 100644 > > --- a/drivers/hwmon/acpi_power_meter.c > > +++ b/drivers/hwmon/acpi_power_meter.c > > @@ -883,6 +883,10 @@ static int acpi_power_meter_add(struct acpi_device *device) > > strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS); > > device->driver_data = resource; > > > > + if (dmi_match(DMI_SYS_VENDOR, "Dell Inc.") && > > + acpi_dev_get_first_match_dev("IPI0001", NULL, -1)) > > + wait_for_acpi_ipmi(); > > wait_for_acpi_ipmi() should return an error code which > should be handled here. OK, I think print an message should be informative. > > > + > > res = read_capabilities(resource); > > if (res) > > goto exit_free; > > diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h > > index 1216d72c650f..ed59fb89721e 100644 > > --- a/include/acpi/acpi_bus.h > > +++ b/include/acpi/acpi_bus.h > > @@ -655,6 +655,7 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s > > bool acpi_quirk_skip_acpi_ac_and_battery(void); > > int acpi_install_cmos_rtc_space_handler(acpi_handle handle); > > void acpi_remove_cmos_rtc_space_handler(acpi_handle handle); > > +void wait_for_acpi_ipmi(void); > > #else > > static inline bool acpi_device_override_status(struct acpi_device *adev, > > unsigned long long *status) > > @@ -672,6 +673,9 @@ static inline int acpi_install_cmos_rtc_space_handler(acpi_handle handle) > > static inline void acpi_remove_cmos_rtc_space_handler(acpi_handle handle) > > { > > } > > +static inline void wait_for_acpi_ipmi(void) > > +{ > > +} > > Something with the conditional is wrong. See 0-day report. Will fix that in next revision. Kai-Heng > > Guenter > > #endif > > > > #if IS_ENABLED(CONFIG_X86_ANDROID_TABLETS) > > -- > > 2.34.1 > > > >
Am 27.12.23 um 05:04 schrieb Kai-Heng Feng: > The following error can be observed at boot: > [ 3.717920] ACPI Error: No handler for Region [SYSI] (00000000ab9e62c5) [IPMI] (20230628/evregion-130) > [ 3.717928] ACPI Error: Region IPMI (ID=7) has no handler (20230628/exfldio-261) > > [ 3.717936] No Local Variables are initialized for Method [_GHL] > > [ 3.717938] No Arguments are initialized for method [_GHL] > > [ 3.717940] ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20230628/psparse-529) > [ 3.717949] ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20230628/psparse-529) > [ 3.717957] ACPI: \_SB_.PMI0: _PMC evaluation failed: AE_NOT_EXIST > > On Dell systems several methods of acpi_power_meter access variables in > IPMI region [0], so wait until IPMI space handler is installed by > acpi_ipmi and also wait until SMI is selected to make the space handler > fully functional. Hi, could it be that the ACPI firmware expects us to support the ACPI SPMI table? The ACPI SPMI table contains a description of the IPMI interface used by the platform, and its purpose seems to be similar to the ACPI ECDT table in that it allows the OS to access IPMI resources before all ACPI namespaces are enumerated. Adding support for this table would solve this problem without stalling the boot process by waiting for the ACPI IPMI device to probe. It would also avoid any issues should the ACPI IPMI device be removed later. Armin Wolf > > [0] https://www.dell.com/support/manuals/en-us/redhat-enterprise-linux-v8.0/rhel8_rn_pub/advanced-configuration-and-power-interface-acpi-error-messages-displayed-in-dmesg?guid=guid-0d5ae482-1977-42cf-b417-3ed5c3f5ee62 > > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> > --- > v2: > - Use completion instead of request_module(). > > drivers/acpi/acpi_ipmi.c | 13 ++++++++++++- > drivers/hwmon/acpi_power_meter.c | 4 ++++ > include/acpi/acpi_bus.h | 4 ++++ > 3 files changed, 20 insertions(+), 1 deletion(-) > > diff --git a/drivers/acpi/acpi_ipmi.c b/drivers/acpi/acpi_ipmi.c > index 0555f68c2dfd..2ea8b7e6cebf 100644 > --- a/drivers/acpi/acpi_ipmi.c > +++ b/drivers/acpi/acpi_ipmi.c > @@ -23,6 +23,8 @@ MODULE_LICENSE("GPL"); > #define IPMI_TIMEOUT (5000) > #define ACPI_IPMI_MAX_MSG_LENGTH 64 > > +static struct completion smi_selected; > + > struct acpi_ipmi_device { > /* the device list attached to driver_data.ipmi_devices */ > struct list_head head; > @@ -463,8 +465,10 @@ static void ipmi_register_bmc(int iface, struct device *dev) > if (temp->handle == handle) > goto err_lock; > } > - if (!driver_data.selected_smi) > + if (!driver_data.selected_smi) { > driver_data.selected_smi = ipmi_device; > + complete(&smi_selected); > + } > list_add_tail(&ipmi_device->head, &driver_data.ipmi_devices); > mutex_unlock(&driver_data.ipmi_lock); > > @@ -578,10 +582,17 @@ acpi_ipmi_space_handler(u32 function, acpi_physical_address address, > return status; > } > > +void wait_for_acpi_ipmi(void) > +{ > + wait_for_completion_interruptible_timeout(&smi_selected, 2 * HZ); > +} > +EXPORT_SYMBOL_GPL(wait_for_acpi_ipmi); > + > static int __init acpi_ipmi_init(void) > { > int result; > acpi_status status; > + init_completion(&smi_selected); > > if (acpi_disabled) > return 0; > diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c > index 703666b95bf4..acaf1ae68dc8 100644 > --- a/drivers/hwmon/acpi_power_meter.c > +++ b/drivers/hwmon/acpi_power_meter.c > @@ -883,6 +883,10 @@ static int acpi_power_meter_add(struct acpi_device *device) > strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS); > device->driver_data = resource; > > + if (dmi_match(DMI_SYS_VENDOR, "Dell Inc.") && > + acpi_dev_get_first_match_dev("IPI0001", NULL, -1)) > + wait_for_acpi_ipmi(); > + > res = read_capabilities(resource); > if (res) > goto exit_free; > diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h > index 1216d72c650f..ed59fb89721e 100644 > --- a/include/acpi/acpi_bus.h > +++ b/include/acpi/acpi_bus.h > @@ -655,6 +655,7 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s > bool acpi_quirk_skip_acpi_ac_and_battery(void); > int acpi_install_cmos_rtc_space_handler(acpi_handle handle); > void acpi_remove_cmos_rtc_space_handler(acpi_handle handle); > +void wait_for_acpi_ipmi(void); > #else > static inline bool acpi_device_override_status(struct acpi_device *adev, > unsigned long long *status) > @@ -672,6 +673,9 @@ static inline int acpi_install_cmos_rtc_space_handler(acpi_handle handle) > static inline void acpi_remove_cmos_rtc_space_handler(acpi_handle handle) > { > } > +static inline void wait_for_acpi_ipmi(void) > +{ > +} > #endif > > #if IS_ENABLED(CONFIG_X86_ANDROID_TABLETS)
On Thu, Jan 4, 2024 at 5:23 AM Armin Wolf <W_Armin@gmx.de> wrote: > > Am 27.12.23 um 05:04 schrieb Kai-Heng Feng: > > > The following error can be observed at boot: > > [ 3.717920] ACPI Error: No handler for Region [SYSI] (00000000ab9e62c5) [IPMI] (20230628/evregion-130) > > [ 3.717928] ACPI Error: Region IPMI (ID=7) has no handler (20230628/exfldio-261) > > > > [ 3.717936] No Local Variables are initialized for Method [_GHL] > > > > [ 3.717938] No Arguments are initialized for method [_GHL] > > > > [ 3.717940] ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20230628/psparse-529) > > [ 3.717949] ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20230628/psparse-529) > > [ 3.717957] ACPI: \_SB_.PMI0: _PMC evaluation failed: AE_NOT_EXIST > > > > On Dell systems several methods of acpi_power_meter access variables in > > IPMI region [0], so wait until IPMI space handler is installed by > > acpi_ipmi and also wait until SMI is selected to make the space handler > > fully functional. > > Hi, > > could it be that the ACPI firmware expects us to support the ACPI SPMI table? > The ACPI SPMI table contains a description of the IPMI interface used by the platform, > and its purpose seems to be similar to the ACPI ECDT table in that it allows the OS > to access IPMI resources before all ACPI namespaces are enumerated. > > Adding support for this table would solve this problem without stalling the boot > process by waiting for the ACPI IPMI device to probe. It would also avoid any issues > should the ACPI IPMI device be removed later. Hi, the ACPI firmware on the system doesn't have SPMI table: $ ls /sys/firmware/acpi/tables/ APIC BERT data DMAR DSDT dynamic EINJ ERST FACP FACS HEST HMAT HPET MCFG MIGT MSCT NBFT OEM4 SLIC SLIT SRAT SSDT1 SSDT2 SSDT3 SSDT4 SSDT5 SSDT6 TPM2 UEFI1 UEFI2 VFCT WSMT Kai-Heng > > Armin Wolf > > > > > [0] https://www.dell.com/support/manuals/en-us/redhat-enterprise-linux-v8.0/rhel8_rn_pub/advanced-configuration-and-power-interface-acpi-error-messages-displayed-in-dmesg?guid=guid-0d5ae482-1977-42cf-b417-3ed5c3f5ee62 > > > > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> > > --- > > v2: > > - Use completion instead of request_module(). > > > > drivers/acpi/acpi_ipmi.c | 13 ++++++++++++- > > drivers/hwmon/acpi_power_meter.c | 4 ++++ > > include/acpi/acpi_bus.h | 4 ++++ > > 3 files changed, 20 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/acpi/acpi_ipmi.c b/drivers/acpi/acpi_ipmi.c > > index 0555f68c2dfd..2ea8b7e6cebf 100644 > > --- a/drivers/acpi/acpi_ipmi.c > > +++ b/drivers/acpi/acpi_ipmi.c > > @@ -23,6 +23,8 @@ MODULE_LICENSE("GPL"); > > #define IPMI_TIMEOUT (5000) > > #define ACPI_IPMI_MAX_MSG_LENGTH 64 > > > > +static struct completion smi_selected; > > + > > struct acpi_ipmi_device { > > /* the device list attached to driver_data.ipmi_devices */ > > struct list_head head; > > @@ -463,8 +465,10 @@ static void ipmi_register_bmc(int iface, struct device *dev) > > if (temp->handle == handle) > > goto err_lock; > > } > > - if (!driver_data.selected_smi) > > + if (!driver_data.selected_smi) { > > driver_data.selected_smi = ipmi_device; > > + complete(&smi_selected); > > + } > > list_add_tail(&ipmi_device->head, &driver_data.ipmi_devices); > > mutex_unlock(&driver_data.ipmi_lock); > > > > @@ -578,10 +582,17 @@ acpi_ipmi_space_handler(u32 function, acpi_physical_address address, > > return status; > > } > > > > +void wait_for_acpi_ipmi(void) > > +{ > > + wait_for_completion_interruptible_timeout(&smi_selected, 2 * HZ); > > +} > > +EXPORT_SYMBOL_GPL(wait_for_acpi_ipmi); > > + > > static int __init acpi_ipmi_init(void) > > { > > int result; > > acpi_status status; > > + init_completion(&smi_selected); > > > > if (acpi_disabled) > > return 0; > > diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c > > index 703666b95bf4..acaf1ae68dc8 100644 > > --- a/drivers/hwmon/acpi_power_meter.c > > +++ b/drivers/hwmon/acpi_power_meter.c > > @@ -883,6 +883,10 @@ static int acpi_power_meter_add(struct acpi_device *device) > > strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS); > > device->driver_data = resource; > > > > + if (dmi_match(DMI_SYS_VENDOR, "Dell Inc.") && > > + acpi_dev_get_first_match_dev("IPI0001", NULL, -1)) > > + wait_for_acpi_ipmi(); > > + > > res = read_capabilities(resource); > > if (res) > > goto exit_free; > > diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h > > index 1216d72c650f..ed59fb89721e 100644 > > --- a/include/acpi/acpi_bus.h > > +++ b/include/acpi/acpi_bus.h > > @@ -655,6 +655,7 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s > > bool acpi_quirk_skip_acpi_ac_and_battery(void); > > int acpi_install_cmos_rtc_space_handler(acpi_handle handle); > > void acpi_remove_cmos_rtc_space_handler(acpi_handle handle); > > +void wait_for_acpi_ipmi(void); > > #else > > static inline bool acpi_device_override_status(struct acpi_device *adev, > > unsigned long long *status) > > @@ -672,6 +673,9 @@ static inline int acpi_install_cmos_rtc_space_handler(acpi_handle handle) > > static inline void acpi_remove_cmos_rtc_space_handler(acpi_handle handle) > > { > > } > > +static inline void wait_for_acpi_ipmi(void) > > +{ > > +} > > #endif > > > > #if IS_ENABLED(CONFIG_X86_ANDROID_TABLETS)
Am 04.01.24 um 03:14 schrieb Kai-Heng Feng: > On Thu, Jan 4, 2024 at 5:23 AM Armin Wolf <W_Armin@gmx.de> wrote: >> Am 27.12.23 um 05:04 schrieb Kai-Heng Feng: >> >>> The following error can be observed at boot: >>> [ 3.717920] ACPI Error: No handler for Region [SYSI] (00000000ab9e62c5) [IPMI] (20230628/evregion-130) >>> [ 3.717928] ACPI Error: Region IPMI (ID=7) has no handler (20230628/exfldio-261) >>> >>> [ 3.717936] No Local Variables are initialized for Method [_GHL] >>> >>> [ 3.717938] No Arguments are initialized for method [_GHL] >>> >>> [ 3.717940] ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20230628/psparse-529) >>> [ 3.717949] ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20230628/psparse-529) >>> [ 3.717957] ACPI: \_SB_.PMI0: _PMC evaluation failed: AE_NOT_EXIST >>> >>> On Dell systems several methods of acpi_power_meter access variables in >>> IPMI region [0], so wait until IPMI space handler is installed by >>> acpi_ipmi and also wait until SMI is selected to make the space handler >>> fully functional. >> Hi, >> >> could it be that the ACPI firmware expects us to support the ACPI SPMI table? >> The ACPI SPMI table contains a description of the IPMI interface used by the platform, >> and its purpose seems to be similar to the ACPI ECDT table in that it allows the OS >> to access IPMI resources before all ACPI namespaces are enumerated. >> >> Adding support for this table would solve this problem without stalling the boot >> process by waiting for the ACPI IPMI device to probe. It would also avoid any issues >> should the ACPI IPMI device be removed later. > Hi, the ACPI firmware on the system doesn't have SPMI table: > $ ls /sys/firmware/acpi/tables/ > APIC BERT data DMAR DSDT dynamic EINJ ERST FACP FACS HEST > HMAT HPET MCFG MIGT MSCT NBFT OEM4 SLIC SLIT SRAT SSDT1 > SSDT2 SSDT3 SSDT4 SSDT5 SSDT6 TPM2 UEFI1 UEFI2 VFCT WSMT > > Kai-Heng Thanks for checking this, in this case you might ignore my suggestion above. Armin Wolf >> Armin Wolf >> >>> [0] https://www.dell.com/support/manuals/en-us/redhat-enterprise-linux-v8.0/rhel8_rn_pub/advanced-configuration-and-power-interface-acpi-error-messages-displayed-in-dmesg?guid=guid-0d5ae482-1977-42cf-b417-3ed5c3f5ee62 >>> >>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> >>> --- >>> v2: >>> - Use completion instead of request_module(). >>> >>> drivers/acpi/acpi_ipmi.c | 13 ++++++++++++- >>> drivers/hwmon/acpi_power_meter.c | 4 ++++ >>> include/acpi/acpi_bus.h | 4 ++++ >>> 3 files changed, 20 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/acpi/acpi_ipmi.c b/drivers/acpi/acpi_ipmi.c >>> index 0555f68c2dfd..2ea8b7e6cebf 100644 >>> --- a/drivers/acpi/acpi_ipmi.c >>> +++ b/drivers/acpi/acpi_ipmi.c >>> @@ -23,6 +23,8 @@ MODULE_LICENSE("GPL"); >>> #define IPMI_TIMEOUT (5000) >>> #define ACPI_IPMI_MAX_MSG_LENGTH 64 >>> >>> +static struct completion smi_selected; >>> + >>> struct acpi_ipmi_device { >>> /* the device list attached to driver_data.ipmi_devices */ >>> struct list_head head; >>> @@ -463,8 +465,10 @@ static void ipmi_register_bmc(int iface, struct device *dev) >>> if (temp->handle == handle) >>> goto err_lock; >>> } >>> - if (!driver_data.selected_smi) >>> + if (!driver_data.selected_smi) { >>> driver_data.selected_smi = ipmi_device; >>> + complete(&smi_selected); >>> + } >>> list_add_tail(&ipmi_device->head, &driver_data.ipmi_devices); >>> mutex_unlock(&driver_data.ipmi_lock); >>> >>> @@ -578,10 +582,17 @@ acpi_ipmi_space_handler(u32 function, acpi_physical_address address, >>> return status; >>> } >>> >>> +void wait_for_acpi_ipmi(void) >>> +{ >>> + wait_for_completion_interruptible_timeout(&smi_selected, 2 * HZ); >>> +} >>> +EXPORT_SYMBOL_GPL(wait_for_acpi_ipmi); >>> + >>> static int __init acpi_ipmi_init(void) >>> { >>> int result; >>> acpi_status status; >>> + init_completion(&smi_selected); >>> >>> if (acpi_disabled) >>> return 0; >>> diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c >>> index 703666b95bf4..acaf1ae68dc8 100644 >>> --- a/drivers/hwmon/acpi_power_meter.c >>> +++ b/drivers/hwmon/acpi_power_meter.c >>> @@ -883,6 +883,10 @@ static int acpi_power_meter_add(struct acpi_device *device) >>> strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS); >>> device->driver_data = resource; >>> >>> + if (dmi_match(DMI_SYS_VENDOR, "Dell Inc.") && >>> + acpi_dev_get_first_match_dev("IPI0001", NULL, -1)) >>> + wait_for_acpi_ipmi(); >>> + >>> res = read_capabilities(resource); >>> if (res) >>> goto exit_free; >>> diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h >>> index 1216d72c650f..ed59fb89721e 100644 >>> --- a/include/acpi/acpi_bus.h >>> +++ b/include/acpi/acpi_bus.h >>> @@ -655,6 +655,7 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s >>> bool acpi_quirk_skip_acpi_ac_and_battery(void); >>> int acpi_install_cmos_rtc_space_handler(acpi_handle handle); >>> void acpi_remove_cmos_rtc_space_handler(acpi_handle handle); >>> +void wait_for_acpi_ipmi(void); >>> #else >>> static inline bool acpi_device_override_status(struct acpi_device *adev, >>> unsigned long long *status) >>> @@ -672,6 +673,9 @@ static inline int acpi_install_cmos_rtc_space_handler(acpi_handle handle) >>> static inline void acpi_remove_cmos_rtc_space_handler(acpi_handle handle) >>> { >>> } >>> +static inline void wait_for_acpi_ipmi(void) >>> +{ >>> +} >>> #endif >>> >>> #if IS_ENABLED(CONFIG_X86_ANDROID_TABLETS)
diff --git a/drivers/acpi/acpi_ipmi.c b/drivers/acpi/acpi_ipmi.c index 0555f68c2dfd..2ea8b7e6cebf 100644 --- a/drivers/acpi/acpi_ipmi.c +++ b/drivers/acpi/acpi_ipmi.c @@ -23,6 +23,8 @@ MODULE_LICENSE("GPL"); #define IPMI_TIMEOUT (5000) #define ACPI_IPMI_MAX_MSG_LENGTH 64 +static struct completion smi_selected; + struct acpi_ipmi_device { /* the device list attached to driver_data.ipmi_devices */ struct list_head head; @@ -463,8 +465,10 @@ static void ipmi_register_bmc(int iface, struct device *dev) if (temp->handle == handle) goto err_lock; } - if (!driver_data.selected_smi) + if (!driver_data.selected_smi) { driver_data.selected_smi = ipmi_device; + complete(&smi_selected); + } list_add_tail(&ipmi_device->head, &driver_data.ipmi_devices); mutex_unlock(&driver_data.ipmi_lock); @@ -578,10 +582,17 @@ acpi_ipmi_space_handler(u32 function, acpi_physical_address address, return status; } +void wait_for_acpi_ipmi(void) +{ + wait_for_completion_interruptible_timeout(&smi_selected, 2 * HZ); +} +EXPORT_SYMBOL_GPL(wait_for_acpi_ipmi); + static int __init acpi_ipmi_init(void) { int result; acpi_status status; + init_completion(&smi_selected); if (acpi_disabled) return 0; diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c index 703666b95bf4..acaf1ae68dc8 100644 --- a/drivers/hwmon/acpi_power_meter.c +++ b/drivers/hwmon/acpi_power_meter.c @@ -883,6 +883,10 @@ static int acpi_power_meter_add(struct acpi_device *device) strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS); device->driver_data = resource; + if (dmi_match(DMI_SYS_VENDOR, "Dell Inc.") && + acpi_dev_get_first_match_dev("IPI0001", NULL, -1)) + wait_for_acpi_ipmi(); + res = read_capabilities(resource); if (res) goto exit_free; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 1216d72c650f..ed59fb89721e 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -655,6 +655,7 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s bool acpi_quirk_skip_acpi_ac_and_battery(void); int acpi_install_cmos_rtc_space_handler(acpi_handle handle); void acpi_remove_cmos_rtc_space_handler(acpi_handle handle); +void wait_for_acpi_ipmi(void); #else static inline bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *status) @@ -672,6 +673,9 @@ static inline int acpi_install_cmos_rtc_space_handler(acpi_handle handle) static inline void acpi_remove_cmos_rtc_space_handler(acpi_handle handle) { } +static inline void wait_for_acpi_ipmi(void) +{ +} #endif #if IS_ENABLED(CONFIG_X86_ANDROID_TABLETS)
The following error can be observed at boot: [ 3.717920] ACPI Error: No handler for Region [SYSI] (00000000ab9e62c5) [IPMI] (20230628/evregion-130) [ 3.717928] ACPI Error: Region IPMI (ID=7) has no handler (20230628/exfldio-261) [ 3.717936] No Local Variables are initialized for Method [_GHL] [ 3.717938] No Arguments are initialized for method [_GHL] [ 3.717940] ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20230628/psparse-529) [ 3.717949] ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20230628/psparse-529) [ 3.717957] ACPI: \_SB_.PMI0: _PMC evaluation failed: AE_NOT_EXIST On Dell systems several methods of acpi_power_meter access variables in IPMI region [0], so wait until IPMI space handler is installed by acpi_ipmi and also wait until SMI is selected to make the space handler fully functional. [0] https://www.dell.com/support/manuals/en-us/redhat-enterprise-linux-v8.0/rhel8_rn_pub/advanced-configuration-and-power-interface-acpi-error-messages-displayed-in-dmesg?guid=guid-0d5ae482-1977-42cf-b417-3ed5c3f5ee62 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> --- v2: - Use completion instead of request_module(). drivers/acpi/acpi_ipmi.c | 13 ++++++++++++- drivers/hwmon/acpi_power_meter.c | 4 ++++ include/acpi/acpi_bus.h | 4 ++++ 3 files changed, 20 insertions(+), 1 deletion(-)