diff mbox series

[v1] Bluetooth: qca: Fix crash when btattach controller ROME

Message ID 1704960978-5437-1-git-send-email-quic_zijuhu@quicinc.com
State Superseded
Headers show
Series [v1] Bluetooth: qca: Fix crash when btattach controller ROME | expand

Commit Message

quic_zijuhu Jan. 11, 2024, 8:16 a.m. UTC 
A crash will happen when btattach controller ROME, and it is caused by
dereferring nullptr hu->serdev, fixed by null check before access.

sudo btattach -B /dev/ttyUSB0 -P qca
Bluetooth: hci1: QCA setup on UART is completed
BUG: kernel NULL pointer dereference, address: 00000000000002f0
......
Workqueue: hci1 hci_power_on [bluetooth]
RIP: 0010:qca_setup+0x7c1/0xe30 [hci_uart]
......
Call Trace:
 <TASK>
 ? show_regs+0x72/0x90
 ? __die+0x25/0x80
 ? page_fault_oops+0x154/0x4c0
 ? srso_alias_return_thunk+0x5/0xfbef5
 ? kmem_cache_alloc+0x16b/0x310
 ? do_user_addr_fault+0x330/0x6e0
 ? srso_alias_return_thunk+0x5/0xfbef5
 ? exc_page_fault+0x84/0x1b0
 ? asm_exc_page_fault+0x27/0x30
 ? qca_setup+0x7c1/0xe30 [hci_uart]
 hci_uart_setup+0x5c/0x1a0 [hci_uart]
 hci_dev_open_sync+0xee/0xca0 [bluetooth]
 hci_dev_do_open+0x2a/0x70 [bluetooth]
 hci_power_on+0x46/0x210 [bluetooth]
 process_one_work+0x17b/0x360
 worker_thread+0x307/0x430
 ? __pfx_worker_thread+0x10/0x10
 kthread+0xf7/0x130
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x46/0x70
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1b/0x30
 </TASK>

Fixes: 03b0093f7b31 ("Bluetooth: hci_qca: get wakeup status from serdev device handle")
Cc: <stable@vger.kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Tested-by: Zijun Hu <quic_zijuhu@quicinc.com>
---
 drivers/bluetooth/hci_qca.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Paul Menzel Jan. 11, 2024, 9:46 a.m. UTC | #1 
Dear Zijun,


Thank you for your patch.

Am 11.01.24 um 09:16 schrieb Zijun Hu:
> A crash will happen when btattach controller ROME, and it is caused by

What does “btattach controller ROME” mean? Is ROME a platform? If so, 
should it be *on ROME* or similar?

> dereferring nullptr hu->serdev, fixed by null check before access.

dereferring → dereferencing

> 
> sudo btattach -B /dev/ttyUSB0 -P qca
> Bluetooth: hci1: QCA setup on UART is completed
> BUG: kernel NULL pointer dereference, address: 00000000000002f0
> ......
> Workqueue: hci1 hci_power_on [bluetooth]
> RIP: 0010:qca_setup+0x7c1/0xe30 [hci_uart]
> ......
> Call Trace:
>   <TASK>
>   ? show_regs+0x72/0x90
>   ? __die+0x25/0x80
>   ? page_fault_oops+0x154/0x4c0
>   ? srso_alias_return_thunk+0x5/0xfbef5
>   ? kmem_cache_alloc+0x16b/0x310
>   ? do_user_addr_fault+0x330/0x6e0
>   ? srso_alias_return_thunk+0x5/0xfbef5
>   ? exc_page_fault+0x84/0x1b0
>   ? asm_exc_page_fault+0x27/0x30
>   ? qca_setup+0x7c1/0xe30 [hci_uart]
>   hci_uart_setup+0x5c/0x1a0 [hci_uart]
>   hci_dev_open_sync+0xee/0xca0 [bluetooth]
>   hci_dev_do_open+0x2a/0x70 [bluetooth]
>   hci_power_on+0x46/0x210 [bluetooth]
>   process_one_work+0x17b/0x360
>   worker_thread+0x307/0x430
>   ? __pfx_worker_thread+0x10/0x10
>   kthread+0xf7/0x130
>   ? __pfx_kthread+0x10/0x10
>   ret_from_fork+0x46/0x70
>   ? __pfx_kthread+0x10/0x10
>   ret_from_fork_asm+0x1b/0x30
>   </TASK>
> 
> Fixes: 03b0093f7b31 ("Bluetooth: hci_qca: get wakeup status from serdev device handle")
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
> Tested-by: Zijun Hu <quic_zijuhu@quicinc.com>

On what device?

> ---
>   drivers/bluetooth/hci_qca.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 94b8c406f0c0..6fcfc1f7bb12 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1951,7 +1951,7 @@ static int qca_setup(struct hci_uart *hu)
>   		qca_debugfs_init(hdev);
>   		hu->hdev->hw_error = qca_hw_error;
>   		hu->hdev->cmd_timeout = qca_cmd_timeout;
> -		if (device_can_wakeup(hu->serdev->ctrl->dev.parent))
> +		if (hu->serdev && device_can_wakeup(hu->serdev->ctrl->dev.parent))
>   			hu->hdev->wakeup = qca_wakeup;

Why is `hu->serdev` not set on the device?

>   	} else if (ret == -ENOENT) {
>   		/* No patch/nvm-config found, run with original fw/config */


Kind regards,

Paul
quic_zijuhu Jan. 11, 2024, 10:14 a.m. UTC | #2 
On 1/11/2024 5:46 PM, Paul Menzel wrote:
> Dear Zijun,
> 
> 
> Thank you for your patch.
> 
> Am 11.01.24 um 09:16 schrieb Zijun Hu:
>> A crash will happen when btattach controller ROME, and it is caused by
> 
> What does “btattach controller ROME” mean? Is ROME a platform? If so, should it be *on ROME* or similar?
> 
ROME is a type of BT controller name, and refer to QCA_ROME of below defination:
drivers/bluetooth/btqca.h:
enum qca_btsoc_type {
	QCA_INVALID = -1,
	QCA_AR3002,
	QCA_ROME,
	QCA_WCN3988,
	QCA_WCN3990,
	QCA_WCN3998,
	QCA_WCN3991,
	QCA_QCA2066,
	QCA_QCA6390,
	QCA_WCN6750,
	QCA_WCN6855,
	QCA_WCN7850,
};

Connect a external ROME module to ubuntu machine by BT UART to USB cable,  then run
"sudo btattach -B /dev/ttyUSB0 -P qca" within ubuntu.

will optimize description.

>> dereferring nullptr hu->serdev, fixed by null check before access.
> 
> dereferring → dereferencing
>
will correct it.
>>
>> sudo btattach -B /dev/ttyUSB0 -P qca
>> Bluetooth: hci1: QCA setup on UART is completed
>> BUG: kernel NULL pointer dereference, address: 00000000000002f0
>> ......
>> Workqueue: hci1 hci_power_on [bluetooth]
>> RIP: 0010:qca_setup+0x7c1/0xe30 [hci_uart]
>> ......
>> Call Trace:
>>   <TASK>
>>   ? show_regs+0x72/0x90
>>   ? __die+0x25/0x80
>>   ? page_fault_oops+0x154/0x4c0
>>   ? srso_alias_return_thunk+0x5/0xfbef5
>>   ? kmem_cache_alloc+0x16b/0x310
>>   ? do_user_addr_fault+0x330/0x6e0
>>   ? srso_alias_return_thunk+0x5/0xfbef5
>>   ? exc_page_fault+0x84/0x1b0
>>   ? asm_exc_page_fault+0x27/0x30
>>   ? qca_setup+0x7c1/0xe30 [hci_uart]
>>   hci_uart_setup+0x5c/0x1a0 [hci_uart]
>>   hci_dev_open_sync+0xee/0xca0 [bluetooth]
>>   hci_dev_do_open+0x2a/0x70 [bluetooth]
>>   hci_power_on+0x46/0x210 [bluetooth]
>>   process_one_work+0x17b/0x360
>>   worker_thread+0x307/0x430
>>   ? __pfx_worker_thread+0x10/0x10
>>   kthread+0xf7/0x130
>>   ? __pfx_kthread+0x10/0x10
>>   ret_from_fork+0x46/0x70
>>   ? __pfx_kthread+0x10/0x10
>>   ret_from_fork_asm+0x1b/0x30
>>   </TASK>
>>
>> Fixes: 03b0093f7b31 ("Bluetooth: hci_qca: get wakeup status from serdev device handle")
>> Cc: <stable@vger.kernel.org>
>> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
>> Tested-by: Zijun Hu <quic_zijuhu@quicinc.com>
> 
> On what device?
> 
this crash will happens on any generic linux machine, for example,

lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 22.04.3 LTS
Release:        22.04
Codename:       jammy

>> ---
>>   drivers/bluetooth/hci_qca.c | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index 94b8c406f0c0..6fcfc1f7bb12 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -1951,7 +1951,7 @@ static int qca_setup(struct hci_uart *hu)
>>           qca_debugfs_init(hdev);
>>           hu->hdev->hw_error = qca_hw_error;
>>           hu->hdev->cmd_timeout = qca_cmd_timeout;
>> -        if (device_can_wakeup(hu->serdev->ctrl->dev.parent))
>> +        if (hu->serdev && device_can_wakeup(hu->serdev->ctrl->dev.parent))
>>               hu->hdev->wakeup = qca_wakeup;
> 
> Why is `hu->serdev` not set on the device?
> 
actually, hu->serdev ONLY exists for BT controller which is embedded within machine's board,
and it will be probed by serdev driver and also don't have available device node for user to btattach.
also don't need to btattach.

for external BT module, it is tty instead of serdev. so hu->serdev is nullptr.


>>       } else if (ret == -ENOENT) {
>>           /* No patch/nvm-config found, run with original fw/config */
> 
> 
> Kind regards,
> 
> Paul
quic_zijuhu Jan. 12, 2024, 5:14 a.m. UTC | #3 
On 1/11/2024 5:46 PM, Paul Menzel wrote:
> Dear Zijun,
> 
> 
> Thank you for your patch.
> 
> Am 11.01.24 um 09:16 schrieb Zijun Hu:
>> A crash will happen when btattach controller ROME, and it is caused by
> 
> What does “btattach controller ROME” mean? Is ROME a platform? If so, should it be *on ROME* or similar?
> 
it means that use tool btattach to attach BT controller QCA_ROME, ROME is a controller name. namely QCA_ROME
as defined below, have optimized description and sent v2 patch.
drivers/bluetooth/btqca.h:
enum qca_btsoc_type {
	QCA_INVALID = -1,
	QCA_AR3002,
	QCA_ROME,
	QCA_WCN3988,
	QCA_WCN3990,
	QCA_WCN3998,
	QCA_WCN3991,
	QCA_QCA2066,
	QCA_QCA6390,
	QCA_WCN6750,
	QCA_WCN6855,
	QCA_WCN7850,
};
 

>> dereferring nullptr hu->serdev, fixed by null check before access.
> 
> dereferring → dereferencing
> 
>>
have corrected as your advise
>> sudo btattach -B /dev/ttyUSB0 -P qca
>> Bluetooth: hci1: QCA setup on UART is completed
>> BUG: kernel NULL pointer dereference, address: 00000000000002f0
>> ......
>> Workqueue: hci1 hci_power_on [bluetooth]
>> RIP: 0010:qca_setup+0x7c1/0xe30 [hci_uart]
>> ......
>> Call Trace:
>>   <TASK>
>>   ? show_regs+0x72/0x90
>>   ? __die+0x25/0x80
>>   ? page_fault_oops+0x154/0x4c0
>>   ? srso_alias_return_thunk+0x5/0xfbef5
>>   ? kmem_cache_alloc+0x16b/0x310
>>   ? do_user_addr_fault+0x330/0x6e0
>>   ? srso_alias_return_thunk+0x5/0xfbef5
>>   ? exc_page_fault+0x84/0x1b0
>>   ? asm_exc_page_fault+0x27/0x30
>>   ? qca_setup+0x7c1/0xe30 [hci_uart]
>>   hci_uart_setup+0x5c/0x1a0 [hci_uart]
>>   hci_dev_open_sync+0xee/0xca0 [bluetooth]
>>   hci_dev_do_open+0x2a/0x70 [bluetooth]
>>   hci_power_on+0x46/0x210 [bluetooth]
>>   process_one_work+0x17b/0x360
>>   worker_thread+0x307/0x430
>>   ? __pfx_worker_thread+0x10/0x10
>>   kthread+0xf7/0x130
>>   ? __pfx_kthread+0x10/0x10
>>   ret_from_fork+0x46/0x70
>>   ? __pfx_kthread+0x10/0x10
>>   ret_from_fork_asm+0x1b/0x30
>>   </TASK>
>>
>> Fixes: 03b0093f7b31 ("Bluetooth: hci_qca: get wakeup status from serdev device handle")
>> Cc: <stable@vger.kernel.org>
>> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
>> Tested-by: Zijun Hu <quic_zijuhu@quicinc.com>
> 
> On what device?
> 
it will happens on any machine with linux OS, such as 
lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 22.04.3 LTS
Release:        22.04
Codename:       jammy
>> ---
>>   drivers/bluetooth/hci_qca.c | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index 94b8c406f0c0..6fcfc1f7bb12 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -1951,7 +1951,7 @@ static int qca_setup(struct hci_uart *hu)
>>           qca_debugfs_init(hdev);
>>           hu->hdev->hw_error = qca_hw_error;
>>           hu->hdev->cmd_timeout = qca_cmd_timeout;
>> -        if (device_can_wakeup(hu->serdev->ctrl->dev.parent))
>> +        if (hu->serdev && device_can_wakeup(hu->serdev->ctrl->dev.parent))
>>               hu->hdev->wakeup = qca_wakeup;
> 
> Why is `hu->serdev` not set on the device?
For ALL QCA BT controller which are attached by tool btattach. hu->serdev is nullptr since
it is not probed by serdev driver. and it is a tty device.

as you saw, the following code also do nullptr check for hu->serdev, since protocol setup function
are used by both Serdev and Non-serdev, thanks

if (hu->serdev) {
       serdev_device_close(hu->serdev);
}

> 
>>       } else if (ret == -ENOENT) {
>>           /* No patch/nvm-config found, run with original fw/config */
> 
> 
> Kind regards,
> 
> Paul
diff mbox series

Patch

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 94b8c406f0c0..6fcfc1f7bb12 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1951,7 +1951,7 @@  static int qca_setup(struct hci_uart *hu)
 		qca_debugfs_init(hdev);
 		hu->hdev->hw_error = qca_hw_error;
 		hu->hdev->cmd_timeout = qca_cmd_timeout;
-		if (device_can_wakeup(hu->serdev->ctrl->dev.parent))
+		if (hu->serdev && device_can_wakeup(hu->serdev->ctrl->dev.parent))
 			hu->hdev->wakeup = qca_wakeup;
 	} else if (ret == -ENOENT) {
 		/* No patch/nvm-config found, run with original fw/config */