diff mbox series

[v2,1/8] dt-bindings: pinctrl: Add thead,th1520-pinctrl bindings

Message ID 20240103132852.298964-2-emil.renner.berthing@canonical.com
State New
Headers show
Series [v2,1/8] dt-bindings: pinctrl: Add thead,th1520-pinctrl bindings | expand

Commit Message

Emil Renner Berthing Jan. 3, 2024, 1:28 p.m. UTC
Add bindings for the pin controllers on the T-Head TH1520 RISC-V SoC.

Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
---
 .../pinctrl/thead,th1520-pinctrl.yaml         | 372 ++++++++++++++++++
 1 file changed, 372 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml

Comments

Rob Herring (Arm) Jan. 15, 2024, 5:36 p.m. UTC | #1
On Wed, Jan 03, 2024 at 02:28:38PM +0100, Emil Renner Berthing wrote:
> Add bindings for the pin controllers on the T-Head TH1520 RISC-V SoC.
> 
> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> ---
>  .../pinctrl/thead,th1520-pinctrl.yaml         | 372 ++++++++++++++++++
>  1 file changed, 372 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml
> new file mode 100644
> index 000000000000..d3ad7a7cfdd1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml
> @@ -0,0 +1,372 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/thead,th1520-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: T-Head TH1520 SoC pin controller
> +
> +maintainers:
> +  - Emil Renner Berthing <emil.renner.berthing@canonical.com>
> +
> +description: |
> +  Pinmux and pinconf controller in the T-Head TH1520 RISC-V SoC.
> +
> +  The TH1520 has 3 groups of pads each controlled from different memory ranges.
> +  Confusingly the memory ranges are named
> +    PADCTRL_AOSYS  -> PAD Group 1
> +    PADCTRL1_APSYS -> PAD Group 2
> +    PADCTRL0_APSYS -> PAD Group 3
> +
> +  Each pad can be muxed individually to up to 6 different functions. For most
> +  pads only a few of those 6 configurations are valid though, and a few pads in
> +  group 1 does not support muxing at all.
> +
> +  Pinconf is fairly regular except for a few pads in group 1 that either can't
> +  be configured or has some special functions. The rest have configurable drive
> +  strength, input enable, schmitt trigger, slew rate, pull-up and pull-down in
> +  addition to a special strong pull up.
> +
> +  Certain pads in group 1 can be muxed to AUDIO_PA0 - AUDIO_PA30 functions and
> +  are then meant to be used by the audio co-processor. Each such pad can then
> +  be further muxed to either audio GPIO or one of 4 functions such as UART, I2C
> +  and I2S. If the audio pad is muxed to one of the 4 functions then pinconf is
> +  also configured in different registers. All of this is done from a different
> +  AUDIO_IOCTRL memory range and is left to the audio co-processor for now.

It is still not clear to me if each instance is a different programming 
model or the same with just different connections. The latter should 
be the same compatible string. That needs to be answered in *this* 
patch, not a reply.

> +
> +properties:
> +  compatible:
> +    enum:
> +      - thead,th1520-group1-pinctrl
> +      - thead,th1520-group2-pinctrl
> +      - thead,th1520-group3-pinctrl
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +patternProperties:
> +  '-[0-9]+$':
> +    type: object
> +
> +    additionalProperties: false
> +
> +    patternProperties:
> +      '-pins$':
> +        type: object
> +        $ref: /schemas/pinctrl/pincfg-node.yaml
> +
> +        additionalProperties: false
> +
> +        description:
> +          A pinctrl node should contain at least one subnode describing one
> +          or more pads and their associated pinmux and pinconf settings.
> +
> +        properties:
> +          pins:
> +            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pins
> +            description: List of pads that properties in the node apply to.
> +
> +          function:
> +            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/function
> +            enum: [ gpio, pwm, uart, ir, i2c, spi, qspi, sdio, audio, i2s,
> +                    gmac0, gmac1, dpu0, dpu1, isp, hdmi, bootsel, debug,
> +                    clock, jtag, iso7816, efuse, reset ]
> +            description: The mux function to select for the given pins.
> +
> +          bias-disable: true
> +
> +          bias-pull-up:
> +            oneOf:
> +              - type: boolean
> +                description: Enable the regular 48kOhm pull-up
> +              - enum: [ 2100, 48000 ]
> +                description: Enable the strong 2.1kOhm pull-up or regular 48kOhm pull-up
> +
> +          bias-pull-down:
> +            oneOf:
> +              - type: boolean
> +              - const: 44000
> +            description: Enable the regular 44kOhm pull-down
> +
> +          drive-strength:
> +            enum: [ 1, 2, 3, 5, 7, 8, 10, 12, 13, 15, 16, 18, 20, 21, 23, 25 ]
> +            description: Drive strength in mA
> +
> +          input-enable: true
> +
> +          input-disable: true
> +
> +          input-schmitt-enable: true
> +
> +          input-schmitt-disable: true
> +
> +          slew-rate:
> +            maximum: 1
> +
> +        required:
> +          - pins
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +
> +additionalProperties: false
> +
> +allOf:
> +  - $ref: pinctrl.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          const: thead,th1520-group1-pinctrl
> +    then:
> +      patternProperties:
> +        '-[0-9]+$':
> +          patternProperties:
> +            '-pins$':
> +              properties:
> +                pins:
> +                  items:
> +                    enum:
> +                      - OSC_CLK_IN
> +                      - OSC_CLK_OUT
> +                      - SYS_RST_N
> +                      - RTC_CLK_IN
> +                      - RTC_CLK_OUT
> +                      - TEST_MODE
> +                      - DEBUG_MODE
> +                      - POR_SEL
> +                      - I2C_AON_SCL
> +                      - I2C_AON_SDA
> +                      - CPU_JTG_TCLK
> +                      - CPU_JTG_TMS
> +                      - CPU_JTG_TDI
> +                      - CPU_JTG_TDO
> +                      - CPU_JTG_TRST
> +                      - AOGPIO_7
> +                      - AOGPIO_8
> +                      - AOGPIO_9
> +                      - AOGPIO_10
> +                      - AOGPIO_11
> +                      - AOGPIO_12
> +                      - AOGPIO_13
> +                      - AOGPIO_14
> +                      - AOGPIO_15
> +                      - AUDIO_PA0
> +                      - AUDIO_PA1
> +                      - AUDIO_PA2
> +                      - AUDIO_PA3
> +                      - AUDIO_PA4
> +                      - AUDIO_PA5
> +                      - AUDIO_PA6
> +                      - AUDIO_PA7
> +                      - AUDIO_PA8
> +                      - AUDIO_PA9
> +                      - AUDIO_PA10
> +                      - AUDIO_PA11
> +                      - AUDIO_PA12
> +                      - AUDIO_PA13
> +                      - AUDIO_PA14
> +                      - AUDIO_PA15
> +                      - AUDIO_PA16
> +                      - AUDIO_PA17
> +                      - AUDIO_PA27
> +                      - AUDIO_PA28
> +                      - AUDIO_PA29
> +                      - AUDIO_PA30
> +  - if:
> +      properties:
> +        compatible:
> +          const: thead,th1520-group2-pinctrl
> +    then:
> +      patternProperties:
> +        '-[0-9]+$':
> +          patternProperties:
> +            '-pins$':
> +              properties:
> +                pins:
> +                  items:
> +                    enum:
> +                      - QSPI1_SCLK
> +                      - QSPI1_CSN0
> +                      - QSPI1_D0_MOSI
> +                      - QSPI1_D1_MISO
> +                      - QSPI1_D2_WP
> +                      - QSPI1_D3_HOLD
> +                      - I2C0_SCL
> +                      - I2C0_SDA
> +                      - I2C1_SCL
> +                      - I2C1_SDA
> +                      - UART1_TXD
> +                      - UART1_RXD
> +                      - UART4_TXD
> +                      - UART4_RXD
> +                      - UART4_CTSN
> +                      - UART4_RTSN
> +                      - UART3_TXD
> +                      - UART3_RXD
> +                      - GPIO0_18
> +                      - GPIO0_19
> +                      - GPIO0_20
> +                      - GPIO0_21
> +                      - GPIO0_22
> +                      - GPIO0_23
> +                      - GPIO0_24
> +                      - GPIO0_25
> +                      - GPIO0_26
> +                      - GPIO0_27
> +                      - GPIO0_28
> +                      - GPIO0_29
> +                      - GPIO0_30
> +                      - GPIO0_31
> +                      - GPIO1_0
> +                      - GPIO1_1
> +                      - GPIO1_2
> +                      - GPIO1_3
> +                      - GPIO1_4
> +                      - GPIO1_5
> +                      - GPIO1_6
> +                      - GPIO1_7
> +                      - GPIO1_8
> +                      - GPIO1_9
> +                      - GPIO1_10
> +                      - GPIO1_11
> +                      - GPIO1_12
> +                      - GPIO1_13
> +                      - GPIO1_14
> +                      - GPIO1_15
> +                      - GPIO1_16
> +                      - CLK_OUT_0
> +                      - CLK_OUT_1
> +                      - CLK_OUT_2
> +                      - CLK_OUT_3
> +                      - GPIO1_21
> +                      - GPIO1_22
> +                      - GPIO1_23
> +                      - GPIO1_24
> +                      - GPIO1_25
> +                      - GPIO1_26
> +                      - GPIO1_27
> +                      - GPIO1_28
> +                      - GPIO1_29
> +                      - GPIO1_30
> +  - if:
> +      properties:
> +        compatible:
> +          const: thead,th1520-group3-pinctrl
> +    then:
> +      patternProperties:
> +        '-[0-9]+$':
> +          patternProperties:
> +            '-pins$':
> +              properties:
> +                pins:
> +                  items:
> +                    enum:
> +                      - UART0_TXD
> +                      - UART0_RXD
> +                      - QSPI0_SCLK
> +                      - QSPI0_CSN0
> +                      - QSPI0_CSN1
> +                      - QSPI0_D0_MOSI
> +                      - QSPI0_D1_MISO
> +                      - QSPI0_D2_WP
> +                      - QSPI1_D3_HOLD
> +                      - I2C2_SCL
> +                      - I2C2_SDA
> +                      - I2C3_SCL
> +                      - I2C3_SDA
> +                      - GPIO2_13
> +                      - SPI_SCLK
> +                      - SPI_CSN
> +                      - SPI_MOSI
> +                      - SPI_MISO
> +                      - GPIO2_18
> +                      - GPIO2_19
> +                      - GPIO2_20
> +                      - GPIO2_21
> +                      - GPIO2_22
> +                      - GPIO2_23
> +                      - GPIO2_24
> +                      - GPIO2_25
> +                      - SDIO0_WPRTN
> +                      - SDIO0_DETN
> +                      - SDIO1_WPRTN
> +                      - SDIO1_DETN
> +                      - GPIO2_30
> +                      - GPIO2_31
> +                      - GPIO3_0
> +                      - GPIO3_1
> +                      - GPIO3_2
> +                      - GPIO3_3
> +                      - HDMI_SCL
> +                      - HDMI_SDA
> +                      - HDMI_CEC
> +                      - GMAC0_TX_CLK
> +                      - GMAC0_RX_CLK
> +                      - GMAC0_TXEN
> +                      - GMAC0_TXD0
> +                      - GMAC0_TXD1
> +                      - GMAC0_TXD2
> +                      - GMAC0_TXD3
> +                      - GMAC0_RXDV
> +                      - GMAC0_RXD0
> +                      - GMAC0_RXD1
> +                      - GMAC0_RXD2
> +                      - GMAC0_RXD3
> +                      - GMAC0_MDC
> +                      - GMAC0_MDIO
> +                      - GMAC0_COL
> +                      - GMAC0_CRS
> +
> +examples:
> +  - |
> +    padctrl0_apsys: pinctrl@ec007000 {
> +        compatible = "thead,th1520-group3-pinctrl";
> +        reg = <0xec007000 0x1000>;
> +        clocks = <&apb_clk>;
> +
> +        uart0_pins: uart0-0 {
> +            tx-pins {
> +                pins = "UART0_TXD";
> +                function = "uart";
> +                bias-disable;
> +                drive-strength = <3>;
> +                input-disable;
> +                input-schmitt-disable;
> +                slew-rate = <0>;
> +            };
> +
> +            rx-pins {
> +                pins = "UART0_RXD";
> +                function = "uart";
> +                bias-disable;
> +                drive-strength = <1>;
> +                input-enable;
> +                input-schmitt-enable;
> +                slew-rate = <0>;
> +            };
> +        };
> +    };
> +
> +    padctrl1_apsys: pinctrl@e7f3c000 {
> +        compatible = "thead,th1520-group2-pinctrl";
> +        reg = <0xe7f3c000 0x1000>;
> +        clocks = <&apb_clk>;
> +
> +        i2c5_pins: i2c5-0 {
> +            i2c-pins {
> +                pins = "QSPI1_CSN0",    /* I2C5_SCL */
> +                       "QSPI1_D0_MOSI"; /* I2C5_SDA */
> +                function = "i2c";
> +                bias-pull-up = <2100>;
> +                drive-strength = <7>;
> +                input-enable;
> +                input-schmitt-enable;
> +                slew-rate = <0>;
> +            };
> +        };
> +    };
> -- 
> 2.43.0
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml
new file mode 100644
index 000000000000..d3ad7a7cfdd1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml
@@ -0,0 +1,372 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/thead,th1520-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-Head TH1520 SoC pin controller
+
+maintainers:
+  - Emil Renner Berthing <emil.renner.berthing@canonical.com>
+
+description: |
+  Pinmux and pinconf controller in the T-Head TH1520 RISC-V SoC.
+
+  The TH1520 has 3 groups of pads each controlled from different memory ranges.
+  Confusingly the memory ranges are named
+    PADCTRL_AOSYS  -> PAD Group 1
+    PADCTRL1_APSYS -> PAD Group 2
+    PADCTRL0_APSYS -> PAD Group 3
+
+  Each pad can be muxed individually to up to 6 different functions. For most
+  pads only a few of those 6 configurations are valid though, and a few pads in
+  group 1 does not support muxing at all.
+
+  Pinconf is fairly regular except for a few pads in group 1 that either can't
+  be configured or has some special functions. The rest have configurable drive
+  strength, input enable, schmitt trigger, slew rate, pull-up and pull-down in
+  addition to a special strong pull up.
+
+  Certain pads in group 1 can be muxed to AUDIO_PA0 - AUDIO_PA30 functions and
+  are then meant to be used by the audio co-processor. Each such pad can then
+  be further muxed to either audio GPIO or one of 4 functions such as UART, I2C
+  and I2S. If the audio pad is muxed to one of the 4 functions then pinconf is
+  also configured in different registers. All of this is done from a different
+  AUDIO_IOCTRL memory range and is left to the audio co-processor for now.
+
+properties:
+  compatible:
+    enum:
+      - thead,th1520-group1-pinctrl
+      - thead,th1520-group2-pinctrl
+      - thead,th1520-group3-pinctrl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+
+    additionalProperties: false
+
+    patternProperties:
+      '-pins$':
+        type: object
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+
+        additionalProperties: false
+
+        description:
+          A pinctrl node should contain at least one subnode describing one
+          or more pads and their associated pinmux and pinconf settings.
+
+        properties:
+          pins:
+            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pins
+            description: List of pads that properties in the node apply to.
+
+          function:
+            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/function
+            enum: [ gpio, pwm, uart, ir, i2c, spi, qspi, sdio, audio, i2s,
+                    gmac0, gmac1, dpu0, dpu1, isp, hdmi, bootsel, debug,
+                    clock, jtag, iso7816, efuse, reset ]
+            description: The mux function to select for the given pins.
+
+          bias-disable: true
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+                description: Enable the regular 48kOhm pull-up
+              - enum: [ 2100, 48000 ]
+                description: Enable the strong 2.1kOhm pull-up or regular 48kOhm pull-up
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - const: 44000
+            description: Enable the regular 44kOhm pull-down
+
+          drive-strength:
+            enum: [ 1, 2, 3, 5, 7, 8, 10, 12, 13, 15, 16, 18, 20, 21, 23, 25 ]
+            description: Drive strength in mA
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          slew-rate:
+            maximum: 1
+
+        required:
+          - pins
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+  - if:
+      properties:
+        compatible:
+          const: thead,th1520-group1-pinctrl
+    then:
+      patternProperties:
+        '-[0-9]+$':
+          patternProperties:
+            '-pins$':
+              properties:
+                pins:
+                  items:
+                    enum:
+                      - OSC_CLK_IN
+                      - OSC_CLK_OUT
+                      - SYS_RST_N
+                      - RTC_CLK_IN
+                      - RTC_CLK_OUT
+                      - TEST_MODE
+                      - DEBUG_MODE
+                      - POR_SEL
+                      - I2C_AON_SCL
+                      - I2C_AON_SDA
+                      - CPU_JTG_TCLK
+                      - CPU_JTG_TMS
+                      - CPU_JTG_TDI
+                      - CPU_JTG_TDO
+                      - CPU_JTG_TRST
+                      - AOGPIO_7
+                      - AOGPIO_8
+                      - AOGPIO_9
+                      - AOGPIO_10
+                      - AOGPIO_11
+                      - AOGPIO_12
+                      - AOGPIO_13
+                      - AOGPIO_14
+                      - AOGPIO_15
+                      - AUDIO_PA0
+                      - AUDIO_PA1
+                      - AUDIO_PA2
+                      - AUDIO_PA3
+                      - AUDIO_PA4
+                      - AUDIO_PA5
+                      - AUDIO_PA6
+                      - AUDIO_PA7
+                      - AUDIO_PA8
+                      - AUDIO_PA9
+                      - AUDIO_PA10
+                      - AUDIO_PA11
+                      - AUDIO_PA12
+                      - AUDIO_PA13
+                      - AUDIO_PA14
+                      - AUDIO_PA15
+                      - AUDIO_PA16
+                      - AUDIO_PA17
+                      - AUDIO_PA27
+                      - AUDIO_PA28
+                      - AUDIO_PA29
+                      - AUDIO_PA30
+  - if:
+      properties:
+        compatible:
+          const: thead,th1520-group2-pinctrl
+    then:
+      patternProperties:
+        '-[0-9]+$':
+          patternProperties:
+            '-pins$':
+              properties:
+                pins:
+                  items:
+                    enum:
+                      - QSPI1_SCLK
+                      - QSPI1_CSN0
+                      - QSPI1_D0_MOSI
+                      - QSPI1_D1_MISO
+                      - QSPI1_D2_WP
+                      - QSPI1_D3_HOLD
+                      - I2C0_SCL
+                      - I2C0_SDA
+                      - I2C1_SCL
+                      - I2C1_SDA
+                      - UART1_TXD
+                      - UART1_RXD
+                      - UART4_TXD
+                      - UART4_RXD
+                      - UART4_CTSN
+                      - UART4_RTSN
+                      - UART3_TXD
+                      - UART3_RXD
+                      - GPIO0_18
+                      - GPIO0_19
+                      - GPIO0_20
+                      - GPIO0_21
+                      - GPIO0_22
+                      - GPIO0_23
+                      - GPIO0_24
+                      - GPIO0_25
+                      - GPIO0_26
+                      - GPIO0_27
+                      - GPIO0_28
+                      - GPIO0_29
+                      - GPIO0_30
+                      - GPIO0_31
+                      - GPIO1_0
+                      - GPIO1_1
+                      - GPIO1_2
+                      - GPIO1_3
+                      - GPIO1_4
+                      - GPIO1_5
+                      - GPIO1_6
+                      - GPIO1_7
+                      - GPIO1_8
+                      - GPIO1_9
+                      - GPIO1_10
+                      - GPIO1_11
+                      - GPIO1_12
+                      - GPIO1_13
+                      - GPIO1_14
+                      - GPIO1_15
+                      - GPIO1_16
+                      - CLK_OUT_0
+                      - CLK_OUT_1
+                      - CLK_OUT_2
+                      - CLK_OUT_3
+                      - GPIO1_21
+                      - GPIO1_22
+                      - GPIO1_23
+                      - GPIO1_24
+                      - GPIO1_25
+                      - GPIO1_26
+                      - GPIO1_27
+                      - GPIO1_28
+                      - GPIO1_29
+                      - GPIO1_30
+  - if:
+      properties:
+        compatible:
+          const: thead,th1520-group3-pinctrl
+    then:
+      patternProperties:
+        '-[0-9]+$':
+          patternProperties:
+            '-pins$':
+              properties:
+                pins:
+                  items:
+                    enum:
+                      - UART0_TXD
+                      - UART0_RXD
+                      - QSPI0_SCLK
+                      - QSPI0_CSN0
+                      - QSPI0_CSN1
+                      - QSPI0_D0_MOSI
+                      - QSPI0_D1_MISO
+                      - QSPI0_D2_WP
+                      - QSPI1_D3_HOLD
+                      - I2C2_SCL
+                      - I2C2_SDA
+                      - I2C3_SCL
+                      - I2C3_SDA
+                      - GPIO2_13
+                      - SPI_SCLK
+                      - SPI_CSN
+                      - SPI_MOSI
+                      - SPI_MISO
+                      - GPIO2_18
+                      - GPIO2_19
+                      - GPIO2_20
+                      - GPIO2_21
+                      - GPIO2_22
+                      - GPIO2_23
+                      - GPIO2_24
+                      - GPIO2_25
+                      - SDIO0_WPRTN
+                      - SDIO0_DETN
+                      - SDIO1_WPRTN
+                      - SDIO1_DETN
+                      - GPIO2_30
+                      - GPIO2_31
+                      - GPIO3_0
+                      - GPIO3_1
+                      - GPIO3_2
+                      - GPIO3_3
+                      - HDMI_SCL
+                      - HDMI_SDA
+                      - HDMI_CEC
+                      - GMAC0_TX_CLK
+                      - GMAC0_RX_CLK
+                      - GMAC0_TXEN
+                      - GMAC0_TXD0
+                      - GMAC0_TXD1
+                      - GMAC0_TXD2
+                      - GMAC0_TXD3
+                      - GMAC0_RXDV
+                      - GMAC0_RXD0
+                      - GMAC0_RXD1
+                      - GMAC0_RXD2
+                      - GMAC0_RXD3
+                      - GMAC0_MDC
+                      - GMAC0_MDIO
+                      - GMAC0_COL
+                      - GMAC0_CRS
+
+examples:
+  - |
+    padctrl0_apsys: pinctrl@ec007000 {
+        compatible = "thead,th1520-group3-pinctrl";
+        reg = <0xec007000 0x1000>;
+        clocks = <&apb_clk>;
+
+        uart0_pins: uart0-0 {
+            tx-pins {
+                pins = "UART0_TXD";
+                function = "uart";
+                bias-disable;
+                drive-strength = <3>;
+                input-disable;
+                input-schmitt-disable;
+                slew-rate = <0>;
+            };
+
+            rx-pins {
+                pins = "UART0_RXD";
+                function = "uart";
+                bias-disable;
+                drive-strength = <1>;
+                input-enable;
+                input-schmitt-enable;
+                slew-rate = <0>;
+            };
+        };
+    };
+
+    padctrl1_apsys: pinctrl@e7f3c000 {
+        compatible = "thead,th1520-group2-pinctrl";
+        reg = <0xe7f3c000 0x1000>;
+        clocks = <&apb_clk>;
+
+        i2c5_pins: i2c5-0 {
+            i2c-pins {
+                pins = "QSPI1_CSN0",    /* I2C5_SCL */
+                       "QSPI1_D0_MOSI"; /* I2C5_SDA */
+                function = "i2c";
+                bias-pull-up = <2100>;
+                drive-strength = <7>;
+                input-enable;
+                input-schmitt-enable;
+                slew-rate = <0>;
+            };
+        };
+    };