| Message ID | 20240111130349.2776699-2-julien.massot@collabora.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for MAX96714F and MAX96717F GMSL2 ser/des | expand |
Hi Julien, On Thu, Jan 11, 2024 at 02:03:46PM +0100, Julien Massot wrote: > Add DT bindings for Maxim MAX96717F GMSL2 Serializer. > > Signed-off-by: Julien Massot <julien.massot@collabora.com> > --- > Change since v2: > - remove reg description > - add data lanes min/maxItems > - Use generic node name > > --- > .../bindings/media/i2c/maxim,max96717f.yaml | 147 ++++++++++++++++++ > 1 file changed, 147 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96717f.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717f.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717f.yaml > new file mode 100644 > index 000000000000..f31517b1dbc8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717f.yaml > @@ -0,0 +1,147 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2024 Collabora Ltd. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/maxim,max96717f.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MAX96717 CSI-2 to GMSL2 Serializer > + > +maintainers: > + - Julien Massot <julien.massot@collabora.com> > + > +description: | > + The MAX96717F serializer converts MIPI CSI-2 D-PHY or C-PHY formatted input Presumably this will need to be configured on the device? You should thus require the bus-type property in the endpoint. > + into GMSL2 serial outputs. The device allows the GMSL2 link to > + simultaneously transmit bidirectional control-channel data while forward > + video transmissions are in progress. The MAX96717F can connect to one > + remotely located deserializer using industry-standard coax or STP > + interconnects. The device cans operate in pixel or tunnel mode. In pixel mode > + the MAX96717F can select the MIPI datatype, while the tunnel mode forward all the MIPI > + data received by the serializer. > + The MAX96717F supports Reference Over Reverse (channel), > + to generate a clock output for the sensor from the GMSL reverse channel. > + > + The GMSL2 serial link operates at a fixed rate of 3Gbps in the > + forward direction and 187.5Mbps in the reverse direction. > + > +properties: > + compatible: > + const: maxim,max96717f > + > + '#gpio-cells': > + const: 2 > + description: > + First cell is the GPIO pin number, second cell is the flags. The GPIO pin > + number must be in range of [0, 10]. > + > + gpio-controller: true > + > + '#clock-cells': > + const: 0 > + > + reg: > + maxItems: 1 > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: CSI-2 Input port > + > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - data-lanes > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + unevaluatedProperties: false > + description: GMSL Output port > + > + required: > + - port@1 > + > + i2c-gate: > + $ref: /schemas/i2c/i2c-controller.yaml > + unevaluatedProperties: false > + description: | I think you can remove ' |'. > + The MAX96717F will forward the I2C requests from the > + incoming GMSL2 link. Therefore, it supports an i2c-gate > + subnode to configure a sensor. > + > +required: > + - compatible > + - reg > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/media/video-interfaces.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + serializer: serializer@40 { > + compatible = "maxim,max96717f"; > + reg = <0x40>; > + gpio-controller; > + #gpio-cells = <2>; > + #clock-cells = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + max96717f_csi_in: endpoint { > + data-lanes = <1 2 3 4>; > + remote-endpoint = <&sensor_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + max96917f_gmsl_out: endpoint { > + remote-endpoint = <&deser_gmsl_in>; > + }; > + }; > + }; > + > + i2c-gate { > + #address-cells = <1>; > + #size-cells = <0>; > + sensor@10 { > + compatible = "st,st-vgxy61"; > + reg = <0x10>; > + reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>; > + clocks = <&serializer>; > + VCORE-supply = <&v1v2>; > + VDDIO-supply = <&v1v8>; > + VANA-supply = <&v2v8>; > + port { > + sensor_out: endpoint { > + data-lanes = <1 2 3 4>; > + remote-endpoint = <&max96717f_csi_in>; > + }; > + }; > + }; > + }; > + }; > + }; > +...
Hi Sakari, On 2/9/24 10:28, Sakari Ailus wrote: > Hi Julien, > > On Thu, Jan 11, 2024 at 02:03:46PM +0100, Julien Massot wrote: >> Add DT bindings for Maxim MAX96717F GMSL2 Serializer. >> >> Signed-off-by: Julien Massot <julien.massot@collabora.com> >> --- >> Change since v2: >> - remove reg description >> - add data lanes min/maxItems >> - Use generic node name >> >> --- >> .../bindings/media/i2c/maxim,max96717f.yaml | 147 ++++++++++++++++++ >> 1 file changed, 147 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96717f.yaml >> >> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717f.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717f.yaml >> new file mode 100644 >> index 000000000000..f31517b1dbc8 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717f.yaml >> @@ -0,0 +1,147 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +# Copyright (C) 2024 Collabora Ltd. >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/media/i2c/maxim,max96717f.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: MAX96717 CSI-2 to GMSL2 Serializer >> + >> +maintainers: >> + - Julien Massot <julien.massot@collabora.com> >> + >> +description: | >> + The MAX96717F serializer converts MIPI CSI-2 D-PHY or C-PHY formatted input > > Presumably this will need to be configured on the device? You should thus > require the bus-type property in the endpoint. Yes I will add the bus-type propery > >> + into GMSL2 serial outputs. The device allows the GMSL2 link to >> + simultaneously transmit bidirectional control-channel data while forward >> + video transmissions are in progress. The MAX96717F can connect to one >> + remotely located deserializer using industry-standard coax or STP >> + interconnects. The device cans operate in pixel or tunnel mode. In pixel mode >> + the MAX96717F can select the MIPI datatype, while the tunnel mode forward all the MIPI >> + data received by the serializer. >> + The MAX96717F supports Reference Over Reverse (channel), >> + to generate a clock output for the sensor from the GMSL reverse channel. >> + >> + The GMSL2 serial link operates at a fixed rate of 3Gbps in the >> + forward direction and 187.5Mbps in the reverse direction. >> + >> +properties: >> + compatible: >> + const: maxim,max96717f >> + >> + '#gpio-cells': >> + const: 2 >> + description: >> + First cell is the GPIO pin number, second cell is the flags. The GPIO pin >> + number must be in range of [0, 10]. >> + >> + gpio-controller: true >> + >> + '#clock-cells': >> + const: 0 >> + >> + reg: >> + maxItems: 1 >> + >> + ports: >> + $ref: /schemas/graph.yaml#/properties/ports >> + >> + properties: >> + port@0: >> + $ref: /schemas/graph.yaml#/$defs/port-base >> + unevaluatedProperties: false >> + description: CSI-2 Input port >> + >> + properties: >> + endpoint: >> + $ref: /schemas/media/video-interfaces.yaml# >> + unevaluatedProperties: false >> + >> + properties: >> + data-lanes: >> + minItems: 1 >> + maxItems: 4 >> + >> + required: >> + - data-lanes >> + >> + port@1: >> + $ref: /schemas/graph.yaml#/properties/port >> + unevaluatedProperties: false >> + description: GMSL Output port >> + >> + required: >> + - port@1 >> + >> + i2c-gate: >> + $ref: /schemas/i2c/i2c-controller.yaml >> + unevaluatedProperties: false >> + description: | > > I think you can remove ' |'. Ok > >> + The MAX96717F will forward the I2C requests from the >> + incoming GMSL2 link. Therefore, it supports an i2c-gate >> + subnode to configure a sensor. >> + >> +required: >> + - compatible >> + - reg >> + - ports >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/gpio/gpio.h> >> + #include <dt-bindings/media/video-interfaces.h> >> + >> + i2c { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + serializer: serializer@40 { >> + compatible = "maxim,max96717f"; >> + reg = <0x40>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + #clock-cells = <0>; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + max96717f_csi_in: endpoint { >> + data-lanes = <1 2 3 4>; >> + remote-endpoint = <&sensor_out>; >> + }; >> + }; >> + >> + port@1 { >> + reg = <1>; >> + max96917f_gmsl_out: endpoint { >> + remote-endpoint = <&deser_gmsl_in>; >> + }; >> + }; >> + }; >> + >> + i2c-gate { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + sensor@10 { >> + compatible = "st,st-vgxy61"; >> + reg = <0x10>; >> + reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>; >> + clocks = <&serializer>; >> + VCORE-supply = <&v1v2>; >> + VDDIO-supply = <&v1v8>; >> + VANA-supply = <&v2v8>; >> + port { >> + sensor_out: endpoint { >> + data-lanes = <1 2 3 4>; >> + remote-endpoint = <&max96717f_csi_in>; >> + }; >> + }; >> + }; >> + }; >> + }; >> + }; >> +... >
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717f.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717f.yaml new file mode 100644 index 000000000000..f31517b1dbc8 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717f.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2024 Collabora Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/maxim,max96717f.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX96717 CSI-2 to GMSL2 Serializer + +maintainers: + - Julien Massot <julien.massot@collabora.com> + +description: | + The MAX96717F serializer converts MIPI CSI-2 D-PHY or C-PHY formatted input + into GMSL2 serial outputs. The device allows the GMSL2 link to + simultaneously transmit bidirectional control-channel data while forward + video transmissions are in progress. The MAX96717F can connect to one + remotely located deserializer using industry-standard coax or STP + interconnects. The device cans operate in pixel or tunnel mode. In pixel mode + the MAX96717F can select the MIPI datatype, while the tunnel mode forward all the MIPI + data received by the serializer. + The MAX96717F supports Reference Over Reverse (channel), + to generate a clock output for the sensor from the GMSL reverse channel. + + The GMSL2 serial link operates at a fixed rate of 3Gbps in the + forward direction and 187.5Mbps in the reverse direction. + +properties: + compatible: + const: maxim,max96717f + + '#gpio-cells': + const: 2 + description: + First cell is the GPIO pin number, second cell is the flags. The GPIO pin + number must be in range of [0, 10]. + + gpio-controller: true + + '#clock-cells': + const: 0 + + reg: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 Input port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: GMSL Output port + + required: + - port@1 + + i2c-gate: + $ref: /schemas/i2c/i2c-controller.yaml + unevaluatedProperties: false + description: | + The MAX96717F will forward the I2C requests from the + incoming GMSL2 link. Therefore, it supports an i2c-gate + subnode to configure a sensor. + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + serializer: serializer@40 { + compatible = "maxim,max96717f"; + reg = <0x40>; + gpio-controller; + #gpio-cells = <2>; + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + max96717f_csi_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&sensor_out>; + }; + }; + + port@1 { + reg = <1>; + max96917f_gmsl_out: endpoint { + remote-endpoint = <&deser_gmsl_in>; + }; + }; + }; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + sensor@10 { + compatible = "st,st-vgxy61"; + reg = <0x10>; + reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>; + clocks = <&serializer>; + VCORE-supply = <&v1v2>; + VDDIO-supply = <&v1v8>; + VANA-supply = <&v2v8>; + port { + sensor_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&max96717f_csi_in>; + }; + }; + }; + }; + }; + }; +...
Add DT bindings for Maxim MAX96717F GMSL2 Serializer. Signed-off-by: Julien Massot <julien.massot@collabora.com> --- Change since v2: - remove reg description - add data lanes min/maxItems - Use generic node name --- .../bindings/media/i2c/maxim,max96717f.yaml | 147 ++++++++++++++++++ 1 file changed, 147 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96717f.yaml