@@ -42,7 +42,7 @@ MODULE_PARM_DESC(enable_crc16,
#define WILC_SPI_RSP_HDR_EXTRA_DATA 8
struct wilc_spi {
- bool isinit; /* true if SPI protocol has been configured */
+ bool isinit; /* true if wilc_spi_init was successful */
bool probing_crc; /* true if we're probing chip's CRC config */
bool crc7_enabled; /* true if crc7 is currently enabled */
bool crc16_enabled; /* true if crc16 is currently enabled */
@@ -55,6 +55,8 @@ struct wilc_spi {
static const struct wilc_hif_func wilc_hif_spi;
static int wilc_spi_reset(struct wilc *wilc);
+static int wilc_spi_configure_bus_protocol(struct wilc *wilc);
+static int wilc_validate_chipid(struct wilc *wilc);
/********************************************
*
@@ -232,8 +234,27 @@ static int wilc_bus_probe(struct spi_device *spi)
}
clk_prepare_enable(wilc->rtc_clk);
+ dev_info(&spi->dev, "Selected CRC config: crc7=%s, crc16=%s\n",
+ enable_crc7 ? "on" : "off", enable_crc16 ? "on" : "off");
+
+ /* we need power to configure the bus protocol and to read the chip id: */
+
+ wilc_wlan_power(wilc, true);
+
+ ret = wilc_spi_configure_bus_protocol(wilc);
+ if (ret)
+ goto power_down;
+
+ ret = wilc_validate_chipid(wilc);
+ if (ret)
+ goto power_down;
+
+ wilc_wlan_power(wilc, false);
return 0;
+power_down:
+ clk_disable_unprepare(wilc->rtc_clk);
+ wilc_wlan_power(wilc, false);
netdev_cleanup:
wilc_netdev_cleanup(wilc);
free:
@@ -1102,26 +1123,34 @@ static int wilc_spi_deinit(struct wilc *wilc)
static int wilc_spi_init(struct wilc *wilc, bool resume)
{
- struct spi_device *spi = to_spi_device(wilc->dev);
struct wilc_spi *spi_priv = wilc->bus_data;
- u32 reg;
- u32 chipid;
- int ret, i;
+ int ret;
if (spi_priv->isinit) {
/* Confirm we can read chipid register without error: */
- ret = wilc_spi_read_reg(wilc, WILC_CHIPID, &chipid);
- if (ret == 0)
+ if (wilc_validate_chipid(wilc) == 0)
return 0;
-
- dev_err(&spi->dev, "Fail cmd read chip id...\n");
}
wilc_wlan_power(wilc, true);
- /*
- * configure protocol
- */
+ ret = wilc_spi_configure_bus_protocol(wilc);
+ if (ret) {
+ wilc_wlan_power(wilc, false);
+ return ret;
+ }
+
+ spi_priv->isinit = true;
+
+ return 0;
+}
+
+static int wilc_spi_configure_bus_protocol(struct wilc *wilc)
+{
+ struct spi_device *spi = to_spi_device(wilc->dev);
+ struct wilc_spi *spi_priv = wilc->bus_data;
+ u32 reg;
+ int ret, i;
/*
* Infer the CRC settings that are currently in effect. This
@@ -1173,6 +1202,15 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
spi_priv->probing_crc = false;
+ return 0;
+}
+
+static int wilc_validate_chipid(struct wilc *wilc)
+{
+ struct spi_device *spi = to_spi_device(wilc->dev);
+ u32 chipid;
+ int ret;
+
/*
* make sure can read chip id without protocol error
*/
@@ -1181,9 +1219,10 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
dev_err(&spi->dev, "Fail cmd read chip id...\n");
return ret;
}
-
- spi_priv->isinit = true;
-
+ if (!is_wilc1000(chipid)) {
+ dev_err(&spi->dev, "Unknown chip id 0x%x\n", chipid);
+ return -ENODEV;
+ }
return 0;
}
@@ -12,11 +12,6 @@
#define WAKE_UP_TRIAL_RETRY 10000
-static inline bool is_wilc1000(u32 id)
-{
- return (id & (~WILC_CHIP_REV_FIELD)) == WILC_1000_BASE_ID;
-}
-
static inline void acquire_bus(struct wilc *wilc, enum bus_acquire acquire)
{
mutex_lock(&wilc->hif_cs);
@@ -409,6 +409,11 @@ struct wilc_cfg_rsp {
struct wilc_vif;
+static inline bool is_wilc1000(u32 id)
+{
+ return (id & (~WILC_CHIP_REV_FIELD)) == WILC_1000_BASE_ID;
+}
+
int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
u32 buffer_size);
int wilc_wlan_start(struct wilc *wilc);
Previously, the driver created a net device (typically wlan0) as soon as the module was loaded. This commit changes the driver to follow normal Linux convention of creating the net device only when bus probing detects a supported chip. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> --- changelog: V1: original version V2: Add missing forward declarations V3: Add missing forward declarations, actually :-( V4: - rearranged function order to improve readability - now relative to wireless-next repository - avoid change error return value and have lower-level functions directly return -ENODEV instead - removed any mention of WILC3000 - export and use existing is_wilc1000() for chipid validation - replaced strbool() function with open code V5: - add clk_disable_unprepare() to power_down path as suggested by Ajay - don't re-write error codes as suggested by Alexi V6: - define is_wilc1000() as an inline function since it is trivial and does not warrant an EXPORT_SYMBOL_GPL() entry (suggested by Kalle) drivers/net/wireless/microchip/wilc1000/spi.c | 69 +++++++++++++++---- .../net/wireless/microchip/wilc1000/wlan.c | 5 -- .../net/wireless/microchip/wilc1000/wlan.h | 5 ++ 3 files changed, 59 insertions(+), 20 deletions(-)