| Message ID | 1711009927-17873-2-git-send-email-quic_taozha@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for multi-port output on the funnel | expand |
On Thu, Mar 21, 2024 at 04:32:04PM +0800, Tao Zhang wrote: > Add new property "label" to label the source corresponding to the > output connection. When the funnel supports multi-output, this > property needs to be introduced to mark which source component a > certain output connection corresponds to. > > Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> > --- > .../arm/arm,coresight-dynamic-funnel.yaml | 34 ++++++++++++++++--- > 1 file changed, 30 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml > index 44a1041cb0fc..cde62c286d29 100644 > --- a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml > +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml > @@ -66,13 +66,39 @@ properties: > $ref: /schemas/graph.yaml#/properties/port > > out-ports: > - $ref: /schemas/graph.yaml#/properties/ports > - additionalProperties: false > - > + type: object > properties: > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > port: > + type: object > + > + patternProperties: > + '^port(@[0-7])?$': > + type: object > description: Output connection to CoreSight Trace bus > - $ref: /schemas/graph.yaml#/properties/port Nope, now you have no constraints on port node properties. Please look at how other bindings are done to add properties on endpoint node. > + > + patternProperties: > + "^endpoint(@[0-9a-f]+)?$": > + type: object > + properties: > + remote-endpoint: > + description: | > + phandle to an 'endpoint' subnode of a remote device node. > + $ref: /schemas/types.yaml#/definitions/phandle Don't need this. > + label: > + description: Label the source corresponding to the output connection > + $ref: /schemas/types.yaml#/definitions/string label already has a type. As this node is an output, aren't you labeling what the destination is, not the "source"? Why can't you look at the remote connection to identify what it is? > + oneOf: > + - required: > + - port > + - required: > + - "#address-cells" > + - "#size-cells" The common schema that you removed handles this. Rob
On 3/21/2024 10:42 PM, Rob Herring wrote: > On Thu, Mar 21, 2024 at 04:32:04PM +0800, Tao Zhang wrote: >> Add new property "label" to label the source corresponding to the >> output connection. When the funnel supports multi-output, this >> property needs to be introduced to mark which source component a >> certain output connection corresponds to. >> >> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> >> --- >> .../arm/arm,coresight-dynamic-funnel.yaml | 34 ++++++++++++++++--- >> 1 file changed, 30 insertions(+), 4 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml >> index 44a1041cb0fc..cde62c286d29 100644 >> --- a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml >> +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml >> @@ -66,13 +66,39 @@ properties: >> $ref: /schemas/graph.yaml#/properties/port >> >> out-ports: >> - $ref: /schemas/graph.yaml#/properties/ports >> - additionalProperties: false >> - >> + type: object >> properties: >> + "#address-cells": >> + const: 1 >> + >> + "#size-cells": >> + const: 0 >> + >> port: >> + type: object >> + >> + patternProperties: >> + '^port(@[0-7])?$': >> + type: object >> description: Output connection to CoreSight Trace bus >> - $ref: /schemas/graph.yaml#/properties/port > > Nope, now you have no constraints on port node properties. Please look > at how other bindings are done to add properties on endpoint node. > Thanks for pointing this out, Rob. Shall we ref port-base and endpoint-base then add new properties on endpoint? In this way, the redundant code from port schema is not required. >> + >> + patternProperties: >> + "^endpoint(@[0-9a-f]+)?$": >> + type: object >> + properties: >> + remote-endpoint: >> + description: | >> + phandle to an 'endpoint' subnode of a remote device node. >> + $ref: /schemas/types.yaml#/definitions/phandle > > Don't need this. > >> + label: >> + description: Label the source corresponding to the output connection >> + $ref: /schemas/types.yaml#/definitions/string > > label already has a type. > > As this node is an output, aren't you labeling what the destination is, > not the "source"? > > Why can't you look at the remote connection to identify what it is? > This funnel can route data stream from different trace source to different output ports. This lable property is added to describe which source is routed to this output port. For example, the graph is as below. Funnel3 routes trace data from TPDM0 to output[0] and output[0] of funnel3 is connected to input[0] of TPDA0. While Funnels routes trace data from TPDM1 to output[1] which connects to input[1] of TPDA0. Hope that clarifies this a little bit. |---------| |---------| |---------| |---------| |---------| | TPDM0 | | TPDM1 | | TPDM2 | | TPDM3 | | TPDM4 | |---------| |---------| |---------| |---------| |---------| | | | | | | | | | | | | | | | |-----| |-----| |-----| |-----| | | | | | | | | | | | [0]| |[1] [0]| |[1] | \-------------/ \-------------/ \------------/ \ FUNNEL0 / \ FUNNEL1 / \ FUNNEL2 / ----------- ----------- ----------- | | | \-------------/ \-------------/ | \ FUNNEL3 / \ FUNNEL4 / | ----------- ----------- | | | | | [0]| |[1] [0]| |[1] | | |---------- | | | | | | | | |-------| | |------- | | |--------- | | | | | | | | | | | [0]| |[1] |[2] |[3] |[4] \ ---------------------------------------------------/ \ TPDA0 / \ / ------------------------------------------------ > >> + oneOf: >> + - required: >> + - port >> + - required: >> + - "#address-cells" >> + - "#size-cells" > > The common schema that you removed handles this. > > Rob
On 22/03/2024 07:02, Tingwei Zhang wrote: > On 3/21/2024 10:42 PM, Rob Herring wrote: >> On Thu, Mar 21, 2024 at 04:32:04PM +0800, Tao Zhang wrote: >>> Add new property "label" to label the source corresponding to the >>> output connection. When the funnel supports multi-output, this >>> property needs to be introduced to mark which source component a >>> certain output connection corresponds to. >>> >>> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> >>> --- >>> .../arm/arm,coresight-dynamic-funnel.yaml | 34 ++++++++++++++++--- >>> 1 file changed, 30 insertions(+), 4 deletions(-) >>> >>> diff --git >>> a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml >>> index 44a1041cb0fc..cde62c286d29 100644 >>> --- >>> a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml >>> +++ >>> b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml >>> @@ -66,13 +66,39 @@ properties: >>> $ref: /schemas/graph.yaml#/properties/port >>> out-ports: >>> - $ref: /schemas/graph.yaml#/properties/ports >>> - additionalProperties: false >>> - >>> + type: object >>> properties: >>> + "#address-cells": >>> + const: 1 >>> + >>> + "#size-cells": >>> + const: 0 >>> + >>> port: >>> + type: object >>> + >>> + patternProperties: >>> + '^port(@[0-7])?$': >>> + type: object >>> description: Output connection to CoreSight Trace bus >>> - $ref: /schemas/graph.yaml#/properties/port >> >> Nope, now you have no constraints on port node properties. Please look >> at how other bindings are done to add properties on endpoint node. >> > Thanks for pointing this out, Rob. Shall we ref port-base and > endpoint-base then add new properties on endpoint? In this way, the > redundant code from port schema is not required. >>> + >>> + patternProperties: >>> + "^endpoint(@[0-9a-f]+)?$": >>> + type: object >>> + properties: >>> + remote-endpoint: >>> + description: | >>> + phandle to an 'endpoint' subnode of a remote >>> device node. >>> + $ref: /schemas/types.yaml#/definitions/phandle >> >> Don't need this. >> >>> + label: >>> + description: Label the source corresponding to the >>> output connection >>> + $ref: /schemas/types.yaml#/definitions/string >> >> label already has a type. >> >> As this node is an output, aren't you labeling what the destination is, >> not the "source"? >> >> Why can't you look at the remote connection to identify what it is? >> > This funnel can route data stream from different trace source to > different output ports. This lable property is added to describe which > source is routed to this output port. > > For example, the graph is as below. Funnel3 routes trace data from TPDM0 > to output[0] and output[0] of funnel3 is connected to input[0] of TPDA0. Funnel3 and Funnel4 are really Replicators ! How are they Funnels ? Again, my question still stands. Are Funnel(Replicator-renamed)3/4 and Funnel 0/1/2 programmable ? Suzuki > While Funnels routes trace data from TPDM1 to output[1] which connects > to input[1] of TPDA0. Hope that clarifies this a little bit. > > |---------| |---------| |---------| |---------| |---------| > | TPDM0 | | TPDM1 | | TPDM2 | | TPDM3 | | TPDM4 | > |---------| |---------| |---------| |---------| |---------| > | | | | | > | | | | | > | | | | | > |-----| |-----| |-----| |-----| | > | | | | | > | | | | | > [0]| |[1] [0]| |[1] | > \-------------/ \-------------/ \------------/ > \ FUNNEL0 / \ FUNNEL1 / \ FUNNEL2 / > ----------- ----------- ----------- > | | | > \-------------/ \-------------/ | > \ FUNNEL3 / \ FUNNEL4 / | > ----------- ----------- | > | | | | > [0]| |[1] [0]| |[1] | > | |---------- | | | > | | | | | > |-------| | |------- | | |--------- | > | | | | | > | | | | | > [0]| |[1] |[2] |[3] |[4] > \ ---------------------------------------------------/ > \ TPDA0 / > \ / > ------------------------------------------------ > >> >>> + oneOf: >>> + - required: >>> + - port >>> + - required: >>> + - "#address-cells" >>> + - "#size-cells" >> >> The common schema that you removed handles this. >> >> Rob >
On 3/22/2024 5:42 PM, Suzuki K Poulose wrote: > On 22/03/2024 07:02, Tingwei Zhang wrote: >> On 3/21/2024 10:42 PM, Rob Herring wrote: >>> On Thu, Mar 21, 2024 at 04:32:04PM +0800, Tao Zhang wrote: >>>> Add new property "label" to label the source corresponding to the >>>> output connection. When the funnel supports multi-output, this >>>> property needs to be introduced to mark which source component a >>>> certain output connection corresponds to. >>>> >>>> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> >>>> --- >>>> .../arm/arm,coresight-dynamic-funnel.yaml | 34 >>>> ++++++++++++++++--- >>>> 1 file changed, 30 insertions(+), 4 deletions(-) >>>> >>>> diff --git >>>> a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml >>>> index 44a1041cb0fc..cde62c286d29 100644 >>>> --- >>>> a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml >>>> +++ >>>> b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml >>>> @@ -66,13 +66,39 @@ properties: >>>> $ref: /schemas/graph.yaml#/properties/port >>>> out-ports: >>>> - $ref: /schemas/graph.yaml#/properties/ports >>>> - additionalProperties: false >>>> - >>>> + type: object >>>> properties: >>>> + "#address-cells": >>>> + const: 1 >>>> + >>>> + "#size-cells": >>>> + const: 0 >>>> + >>>> port: >>>> + type: object >>>> + >>>> + patternProperties: >>>> + '^port(@[0-7])?$': >>>> + type: object >>>> description: Output connection to CoreSight Trace bus >>>> - $ref: /schemas/graph.yaml#/properties/port >>> >>> Nope, now you have no constraints on port node properties. Please look >>> at how other bindings are done to add properties on endpoint node. >>> >> Thanks for pointing this out, Rob. Shall we ref port-base and >> endpoint-base then add new properties on endpoint? In this way, the >> redundant code from port schema is not required. >>>> + >>>> + patternProperties: >>>> + "^endpoint(@[0-9a-f]+)?$": >>>> + type: object >>>> + properties: >>>> + remote-endpoint: >>>> + description: | >>>> + phandle to an 'endpoint' subnode of a remote >>>> device node. >>>> + $ref: /schemas/types.yaml#/definitions/phandle >>> >>> Don't need this. >>> >>>> + label: >>>> + description: Label the source corresponding to the >>>> output connection >>>> + $ref: /schemas/types.yaml#/definitions/string >>> >>> label already has a type. >>> >>> As this node is an output, aren't you labeling what the destination is, >>> not the "source"? >>> >>> Why can't you look at the remote connection to identify what it is? >>> >> This funnel can route data stream from different trace source to >> different output ports. This lable property is added to describe which >> source is routed to this output port. >> >> For example, the graph is as below. Funnel3 routes trace data from >> TPDM0 to output[0] and output[0] of funnel3 is connected to input[0] >> of TPDA0. > > Funnel3 and Funnel4 are really Replicators ! How are they Funnels ? > Again, my question still stands. Are Funnel(Replicator-renamed)3/4 and > Funnel 0/1/2 programmable ? Sorry for oversimplied the topology. Funnel3 and Funnel4 have multiple input ports instead of just one input port. It can have multiple input ports and multiple output ports. Unlike replicator, it won't replicate same data trace to all the outputs. Funnel3/funnel4 has same programing capability like standard coresight funnel. It can enable input ports as requested. It can not be programed to route which source to which output ports. Hardware staticlly defined which source is routed to which output. > > Suzuki > > >> While Funnels routes trace data from TPDM1 to output[1] which connects >> to input[1] of TPDA0. Hope that clarifies this a little bit. >> >> |---------| |---------| |---------| |---------| |---------| >> | TPDM0 | | TPDM1 | | TPDM2 | | TPDM3 | | TPDM4 | >> |---------| |---------| |---------| |---------| |---------| >> | | | | | >> | | | | | >> | | | | | >> |-----| |-----| |-----| |-----| | >> | | | | | >> | | | | | >> [0]| |[1] [0]| |[1] | >> \-------------/ \-------------/ \------------/ >> \ FUNNEL0 / \ FUNNEL1 / \ FUNNEL2 / >> ----------- ----------- ----------- >> | | | >> \-------------/ \-------------/ | >> \ FUNNEL3 / \ FUNNEL4 / | >> ----------- ----------- | >> | | | | >> [0]| |[1] [0]| |[1] | >> | |---------- | | | >> | | | | | >> |-------| | |------- | | |--------- | >> | | | | | >> | | | | | >> [0]| |[1] |[2] |[3] |[4] >> \ ---------------------------------------------------/ >> \ TPDA0 / >> \ / >> ------------------------------------------------ >> >>> >>>> + oneOf: >>>> + - required: >>>> + - port >>>> + - required: >>>> + - "#address-cells" >>>> + - "#size-cells" >>> >>> The common schema that you removed handles this. >>> >>> Rob >> >
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml index 44a1041cb0fc..cde62c286d29 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml @@ -66,13 +66,39 @@ properties: $ref: /schemas/graph.yaml#/properties/port out-ports: - $ref: /schemas/graph.yaml#/properties/ports - additionalProperties: false - + type: object properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + port: + type: object + + patternProperties: + '^port(@[0-7])?$': + type: object description: Output connection to CoreSight Trace bus - $ref: /schemas/graph.yaml#/properties/port + + patternProperties: + "^endpoint(@[0-9a-f]+)?$": + type: object + properties: + remote-endpoint: + description: | + phandle to an 'endpoint' subnode of a remote device node. + $ref: /schemas/types.yaml#/definitions/phandle + label: + description: Label the source corresponding to the output connection + $ref: /schemas/types.yaml#/definitions/string + oneOf: + - required: + - port + - required: + - "#address-cells" + - "#size-cells" required: - compatible
Add new property "label" to label the source corresponding to the output connection. When the funnel supports multi-output, this property needs to be introduced to mark which source component a certain output connection corresponds to. Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> --- .../arm/arm,coresight-dynamic-funnel.yaml | 34 ++++++++++++++++--- 1 file changed, 30 insertions(+), 4 deletions(-)