@@ -8,13 +8,25 @@ Armv8 versions of the A-profile architecture. It also has support for
the following architecture extensions:
- FEAT_AA32BF16 (AArch32 BFloat16 instructions)
+- FEAT_AA32EL0 (Support for AArch32 at EL0)
+- FEAT_AA32EL1 (Support for AArch32 at EL1)
+- FEAT_AA32EL2 (Support for AArch32 at EL2)
+- FEAT_AA32EL3 (Support for AArch32 at EL3)
- FEAT_AA32HPD (AArch32 hierarchical permission disables)
- FEAT_AA32I8MM (AArch32 Int8 matrix multiplication instructions)
+- FEAT_AA64EL0 (Support for AArch64 at EL0)
+- FEAT_AA64EL1 (Support for AArch64 at EL1)
+- FEAT_AA64EL2 (Support for AArch64 at EL2)
+- FEAT_AA64EL3 (Support for AArch64 at EL3)
+- FEAT_AdvSIMD (Advanced SIMD Extension)
- FEAT_AES (AESD and AESE instructions)
+- FEAT_ASID16 (16 bit ASID)
- FEAT_BBM at level 2 (Translation table break-before-make levels)
- FEAT_BF16 (AArch64 BFloat16 instructions)
- FEAT_BTI (Branch Target Identification)
+- FEAT_CCIDX (Extended cache index)
- FEAT_CRC32 (CRC32 instructions)
+- FEAT_Crypto (Cryptographic Extension)
- FEAT_CSV2 (Cache speculation variant 2)
- FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1)
- FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2)
@@ -23,18 +35,27 @@ the following architecture extensions:
- FEAT_DGH (Data gathering hint)
- FEAT_DIT (Data Independent Timing instructions)
- FEAT_DPB (DC CVAP instruction)
+- FEAT_DPB2 (DC CVADP instruction)
+- FEAT_Debugv8p1 (Debug with VHE)
- FEAT_Debugv8p2 (Debug changes for v8.2)
- FEAT_Debugv8p4 (Debug changes for v8.4)
- FEAT_DotProd (Advanced SIMD dot product instructions)
- FEAT_DoubleFault (Double Fault Extension)
- FEAT_E0PD (Preventing EL0 access to halves of address maps)
- FEAT_ECV (Enhanced Counter Virtualization)
+- FEAT_EL0 (Support for execution at EL0)
+- FEAT_EL1 (Support for execution at EL1)
+- FEAT_EL2 (Support for execution at EL2)
+- FEAT_EL3 (Support for execution at EL3)
- FEAT_EPAC (Enhanced pointer authentication)
- FEAT_ETS (Enhanced Translation Synchronization)
- FEAT_EVT (Enhanced Virtualization Traps)
+- FEAT_F32MM (Single-precision Matrix Multiplication)
+- FEAT_F64MM (Double-precision Matrix Multiplication)
- FEAT_FCMA (Floating-point complex number instructions)
- FEAT_FGT (Fine-Grained Traps)
- FEAT_FHM (Floating-point half-precision multiplication instructions)
+- FEAT_FP (Floating Point extensions)
- FEAT_FP16 (Half-precision floating-point data processing)
- FEAT_FPAC (Faulting on AUT* instructions)
- FEAT_FPACCOMBINE (Faulting on combined pointer authentication instructions)
@@ -60,10 +81,13 @@ the following architecture extensions:
- FEAT_LSE (Large System Extensions)
- FEAT_LSE2 (Large System Extensions v2)
- FEAT_LVA (Large Virtual Address space)
+- FEAT_MixedEnd (Mixed-endian support)
+- FEAT_MixdEndEL0 (Mixed-endian support at EL0)
- FEAT_MOPS (Standardization of memory operations)
- FEAT_MTE (Memory Tagging Extension)
- FEAT_MTE2 (Memory Tagging Extension)
- FEAT_MTE3 (MTE Asymmetric Fault Handling)
+- FEAT_MTE_ASYM_FAULT (Memory tagging asymmetric faults)
- FEAT_NV (Nested Virtualization)
- FEAT_NV2 (Enhanced nested virtualization support)
- FEAT_PACIMP (Pointer authentication - IMPLEMENTATION DEFINED algorithm)
@@ -75,6 +99,7 @@ the following architecture extensions:
- FEAT_PAuth (Pointer authentication)
- FEAT_PAuth2 (Enhancements to pointer authentication)
- FEAT_PMULL (PMULL, PMULL2 instructions)
+- FEAT_PMUv3 (PMU extension version 3)
- FEAT_PMUv3p1 (PMU Extensions v3.1)
- FEAT_PMUv3p4 (PMU Extensions v3.4)
- FEAT_PMUv3p5 (PMU Extensions v3.5)
@@ -96,8 +121,18 @@ the following architecture extensions:
- FEAT_SME_FA64 (Full A64 instruction set in Streaming SVE mode)
- FEAT_SME_F64F64 (Double-precision floating-point outer product instructions)
- FEAT_SME_I16I64 (16-bit to 64-bit integer widening outer product instructions)
+- FEAT_SVE (Scalable Vector Extension)
+- FEAT_SVE_AES (Scalable Vector AES instructions)
+- FEAT_SVE_BitPerm (Scalable Vector Bit Permutes instructions)
+- FEAT_SVE_PMULL128 (Scalable Vector PMULL instructions)
+- FEAT_SVE_SHA3 (Scalable Vector SHA3 instructions)
+- FEAT_SVE_SM4 (Scalable Vector SM4 instructions)
+- FEAT_SVE2 (Scalable Vector Extension version 2)
- FEAT_SPECRES (Speculation restriction instructions)
- FEAT_SSBS (Speculative Store Bypass Safe)
+- FEAT_TGran16K (Support for 16KB memory translation granule size at stage 1)
+- FEAT_TGran4K (Support for 4KB memory translation granule size at stage 1)
+- FEAT_TGran64K (Support for 64KB memory translation granule size at stage 1)
- FEAT_TIDCP1 (EL0 use of IMPLEMENTATION DEFINED functionality)
- FEAT_TLBIOS (TLB invalidate instructions in Outer Shareable domain)
- FEAT_TLBIRANGE (TLB invalidate range instructions)
@@ -108,8 +143,6 @@ the following architecture extensions:
- FEAT_VHE (Virtualization Host Extensions)
- FEAT_VMID16 (16-bit VMID)
- FEAT_XNX (Translation table stage 2 Unprivileged Execute-never)
-- SVE (The Scalable Vector Extension)
-- SVE2 (The Scalable Vector Extension v2)
For information on the specifics of these extensions, please refer
to the `Armv8-A Arm Architecture Reference Manual
As of version DDI0487K.a of the Arm ARM, some architectural features which previously didn't have official names have been named. Add these to the list of features which QEMU's TCG emulation supports. Mostly these are features which we thought of as part of baseline 8.0 support. For SVE and SVE2, the names have been brought into line with the FEAT_* naming convention of other extensions, and some sub-components split into separate FEAT_ items. In a few cases (eg FEAT_CCIDX, FEAT_DPB2) the omission from our list was just an oversight. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 37 +++++++++++++++++++++++++++++++++-- 1 file changed, 35 insertions(+), 2 deletions(-)