diff mbox series

[1/7] dt-bindings: pinctrl: Add pinctrl for Sophgo CV1800 series SoC.

Message ID IA1PR20MB49530D9BC6C8011B730433C2BBDE2@IA1PR20MB4953.namprd20.prod.outlook.com
State Superseded
Headers show
Series riscv: sophgo: Add pinctrl support for CV1800 series SoC | expand

Commit Message

Inochi Amaoto July 4, 2024, 5:46 a.m. UTC
Add pinctrl support for Sophgo CV1800 series SoC.

Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
---
 .../pinctrl/sophgo,cv1800-pinctrl.yaml        | 120 +++++++++++++++++
 include/dt-bindings/pinctrl/pinctrl-cv1800b.h |  63 +++++++++
 include/dt-bindings/pinctrl/pinctrl-cv1812h.h | 127 ++++++++++++++++++
 include/dt-bindings/pinctrl/pinctrl-cv18xx.h  |  19 +++
 include/dt-bindings/pinctrl/pinctrl-sg2000.h  | 127 ++++++++++++++++++
 include/dt-bindings/pinctrl/pinctrl-sg2002.h  |  79 +++++++++++
 6 files changed, 535 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
 create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv1800b.h
 create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv1812h.h
 create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv18xx.h
 create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2000.h
 create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2002.h

--
2.45.2

Comments

Rob Herring (Arm) July 8, 2024, 4:29 p.m. UTC | #1
On Thu, Jul 04, 2024 at 01:46:37PM +0800, Inochi Amaoto wrote:
> Add pinctrl support for Sophgo CV1800 series SoC.
> 
> Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
> ---
>  .../pinctrl/sophgo,cv1800-pinctrl.yaml        | 120 +++++++++++++++++
>  include/dt-bindings/pinctrl/pinctrl-cv1800b.h |  63 +++++++++
>  include/dt-bindings/pinctrl/pinctrl-cv1812h.h | 127 ++++++++++++++++++
>  include/dt-bindings/pinctrl/pinctrl-cv18xx.h  |  19 +++
>  include/dt-bindings/pinctrl/pinctrl-sg2000.h  | 127 ++++++++++++++++++
>  include/dt-bindings/pinctrl/pinctrl-sg2002.h  |  79 +++++++++++
>  6 files changed, 535 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
>  create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv1800b.h
>  create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv1812h.h
>  create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv18xx.h
>  create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2000.h
>  create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2002.h
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> new file mode 100644
> index 000000000000..b7e4084b78d6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> @@ -0,0 +1,120 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/sophgo,cv1800-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sophgo CV1800 Pin Controller
> +
> +maintainers:
> +  - Inochi Amaoto <inochiama@outlook.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - sophgo,cv1800b-pinctrl
> +      - sophgo,cv1812h-pinctrl
> +      - sophgo,sg2000-pinctrl
> +      - sophgo,sg2002-pinctrl
> +
> +  reg:
> +    items:
> +      - description: pinctrl for system domain
> +      - description: pinctrl for rtc domain

Based on the example's addresses, this isn't 1 block, but 2 blocks. Is 
this really 1 block, 2 instances of the same block, or 2 different 
blocks?

> +
> +  reg-names:
> +    items:
> +      - const: sys
> +      - const: rtc
> +
> +  resets:
> +    maxItems: 1
> +
> +patternProperties:
> +  '-cfg$':
> +    type: object
> +    patternProperties:
> +      '-pins$':
> +        type: object
> +        description: |
> +          A pinctrl node should contain at least one subnode representing the

It's the '-cfg' node that 'should contain at least one subnode', not 
this node.

> +          pinctrl groups available on the machine. Each subnode will list the
> +          pins it needs, and how they should be configured, with regard to
> +          muxer configuration, bias, input enable/disable, input schmitt
> +          trigger enable/disable, slew-rate and drive strength.
> +        $ref: /schemas/pinctrl/pincfg-node.yaml
> +
> +        properties:
> +          pinmux:
> +            description: |
> +              The list of GPIOs and their mux settings that properties in the
> +              node apply to. This should be set using the GPIOMUX or GPIOMUX2
> +              macro.
> +            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux
> +
> +          bias-pull-up:
> +            type: boolean
> +
> +          bias-pull-down:
> +            type: boolean
> +
> +          drive-strength:
> +            $ref: /schemas/types.yaml#/definitions/uint32
> +            minimum: 0
> +            maximum: 7
> +
> +          input-schmitt:
> +            $ref: /schemas/types.yaml#/definitions/uint32
> +            minimum: 0
> +            maximum: 7
> +
> +          slew-rate:
> +            enum: [ 0, 1 ]
> +
> +          sophgo,bus-holder:
> +            description: enable bus holder
> +            type: boolean
> +
> +        additionalProperties: false
> +
> +    additionalProperties: false

In the indented cases, put these before properties or patternProperties.

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/pinctrl/pinctrl-cv1800b.h>
> +
> +    soc {
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +
> +        pinctrl@3001000 {
> +            compatible = "sophgo,cv1800b-pinctrl";
> +            reg = <0x03001000 0x1000>,
> +                  <0x05027000 0x1000>;
> +            reg-names = "sys", "rtc";
> +
> +            uart0_cfg: uart0-cfg {
> +                uart0-pins {
> +                    pinmux = <PINMUX(PIN_UART0_TX, 0)>,
> +                             <PINMUX(PIN_UART0_RX, 0)>;
> +                    bias-pull-up;
> +                    drive-strength = <2>;
> +                    slew-rate = <0>;
> +                };
> +            };
> +        };
> +
> +        uart0 {
> +            pinctrl-0 = <&uart0_cfg>;
> +            pinctrl-names = "default";

Not a complete node. Plus the examples for a provider don't show the 
consumer side and vice-versa. So drop the node.

> +        };
> +    };
> +
> +...
> diff --git a/include/dt-bindings/pinctrl/pinctrl-cv1800b.h b/include/dt-bindings/pinctrl/pinctrl-cv1800b.h
> new file mode 100644
> index 000000000000..0593fc33d470
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/pinctrl-cv1800b.h
> @@ -0,0 +1,63 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
> + *
> + * This file is generated from vendor pinout definition.
> + */
> +
> +#ifndef _DT_BINDINGS_PINCTRL_CV1800B_H
> +#define _DT_BINDINGS_PINCTRL_CV1800B_H
> +
> +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> +
> +#define PIN_AUD_AOUTR			1
> +#define PIN_SD0_CLK			3
> +#define PIN_SD0_CMD			4
> +#define PIN_SD0_D0			5
> +#define PIN_SD0_D1			7
> +#define PIN_SD0_D2			8
> +#define PIN_SD0_D3			9
> +#define PIN_SD0_CD			11
> +#define PIN_SD0_PWR_EN			12
> +#define PIN_SPK_EN			14
> +#define PIN_UART0_TX			15
> +#define PIN_UART0_RX			16
> +#define PIN_SPINOR_HOLD_X		17
> +#define PIN_SPINOR_SCK			18
> +#define PIN_SPINOR_MOSI			19
> +#define PIN_SPINOR_WP_X			20
> +#define PIN_SPINOR_MISO			21
> +#define PIN_SPINOR_CS_X			22
> +#define PIN_IIC0_SCL			23
> +#define PIN_IIC0_SDA			24
> +#define PIN_AUX0			25
> +#define PIN_PWR_VBAT_DET		30
> +#define PIN_PWR_SEQ2			31
> +#define PIN_XTAL_XIN			33
> +#define PIN_SD1_GPIO0			35
> +#define PIN_SD1_GPIO1			36
> +#define PIN_SD1_D3			38
> +#define PIN_SD1_D2			39
> +#define PIN_SD1_D1			40
> +#define PIN_SD1_D0			41
> +#define PIN_SD1_CMD			42
> +#define PIN_SD1_CLK			43
> +#define PIN_ADC1			44
> +#define PIN_USB_VBUS_DET		45
> +#define PIN_ETH_TXP			47
> +#define PIN_ETH_TXM			48
> +#define PIN_ETH_RXP			49
> +#define PIN_ETH_RXM			50
> +#define PIN_MIPIRX4N			56
> +#define PIN_MIPIRX4P			57
> +#define PIN_MIPIRX3N			58
> +#define PIN_MIPIRX3P			59
> +#define PIN_MIPIRX2N			60
> +#define PIN_MIPIRX2P			61
> +#define PIN_MIPIRX1N			62
> +#define PIN_MIPIRX1P			63
> +#define PIN_MIPIRX0N			64
> +#define PIN_MIPIRX0P			65
> +#define PIN_AUD_AINL_MIC		67
> +
> +#endif /* _DT_BINDINGS_PINCTRL_CV1800B_H */
> diff --git a/include/dt-bindings/pinctrl/pinctrl-cv1812h.h b/include/dt-bindings/pinctrl/pinctrl-cv1812h.h
> new file mode 100644
> index 000000000000..2908de347919
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/pinctrl-cv1812h.h
> @@ -0,0 +1,127 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
> + *
> + * This file is generated from vendor pinout definition.
> + */
> +
> +#ifndef _DT_BINDINGS_PINCTRL_CV1812H_H
> +#define _DT_BINDINGS_PINCTRL_CV1812H_H
> +
> +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> +
> +#define PINPOS(row, col)			\
> +	((((row) - 'A' + 1) << 8) + ((col) - 1))
> +
> +#define PIN_MIPI_TXM4			PINPOS('A', 2)
> +#define PIN_MIPIRX0N			PINPOS('A', 4)
> +#define PIN_MIPIRX3P			PINPOS('A', 6)
> +#define PIN_MIPIRX4P			PINPOS('A', 7)
> +#define PIN_VIVO_D2			PINPOS('A', 9)
> +#define PIN_VIVO_D3			PINPOS('A', 10)
> +#define PIN_VIVO_D10			PINPOS('A', 12)
> +#define PIN_USB_VBUS_DET		PINPOS('A', 13)
> +#define PIN_MIPI_TXP3			PINPOS('B', 1)
> +#define PIN_MIPI_TXM3			PINPOS('B', 2)
> +#define PIN_MIPI_TXP4			PINPOS('B', 3)
> +#define PIN_MIPIRX0P			PINPOS('B', 4)
> +#define PIN_MIPIRX1N			PINPOS('B', 5)
> +#define PIN_MIPIRX2N			PINPOS('B', 6)
> +#define PIN_MIPIRX4N			PINPOS('B', 7)
> +#define PIN_MIPIRX5N			PINPOS('B', 8)
> +#define PIN_VIVO_D1			PINPOS('B', 9)
> +#define PIN_VIVO_D5			PINPOS('B', 10)
> +#define PIN_VIVO_D7			PINPOS('B', 11)
> +#define PIN_VIVO_D9			PINPOS('B', 12)
> +#define PIN_USB_ID			PINPOS('B', 13)
> +#define PIN_ETH_RXM			PINPOS('B', 15)
> +#define PIN_MIPI_TXP2			PINPOS('C', 1)
> +#define PIN_MIPI_TXM2			PINPOS('C', 2)
> +#define PIN_CAM_PD0			PINPOS('C', 3)
> +#define PIN_CAM_MCLK0			PINPOS('C', 4)
> +#define PIN_MIPIRX1P			PINPOS('C', 5)
> +#define PIN_MIPIRX2P			PINPOS('C', 6)
> +#define PIN_MIPIRX3N			PINPOS('C', 7)
> +#define PIN_MIPIRX5P			PINPOS('C', 8)
> +#define PIN_VIVO_CLK			PINPOS('C', 9)
> +#define PIN_VIVO_D6			PINPOS('C', 10)
> +#define PIN_VIVO_D8			PINPOS('C', 11)
> +#define PIN_USB_VBUS_EN			PINPOS('C', 12)
> +#define PIN_ETH_RXP			PINPOS('C', 14)
> +#define PIN_GPIO_RTX			PINPOS('C', 15)
> +#define PIN_MIPI_TXP1			PINPOS('D', 1)
> +#define PIN_MIPI_TXM1			PINPOS('D', 2)
> +#define PIN_CAM_MCLK1			PINPOS('D', 3)
> +#define PIN_IIC3_SCL			PINPOS('D', 4)
> +#define PIN_VIVO_D4			PINPOS('D', 10)
> +#define PIN_ETH_TXM			PINPOS('D', 14)
> +#define PIN_ETH_TXP			PINPOS('D', 15)
> +#define PIN_MIPI_TXP0			PINPOS('E', 1)
> +#define PIN_MIPI_TXM0			PINPOS('E', 2)
> +#define PIN_CAM_PD1			PINPOS('E', 4)
> +#define PIN_CAM_RST0			PINPOS('E', 5)
> +#define PIN_VIVO_D0			PINPOS('E', 10)
> +#define PIN_ADC1			PINPOS('E', 13)
> +#define PIN_ADC2			PINPOS('E', 14)
> +#define PIN_ADC3			PINPOS('E', 15)
> +#define PIN_AUD_AOUTL			PINPOS('F', 2)
> +#define PIN_IIC3_SDA			PINPOS('F', 4)
> +#define PIN_SD1_D2			PINPOS('F', 14)
> +#define PIN_AUD_AOUTR			PINPOS('G', 2)
> +#define PIN_SD1_D3			PINPOS('G', 13)
> +#define PIN_SD1_CLK			PINPOS('G', 14)
> +#define PIN_SD1_CMD			PINPOS('G', 15)
> +#define PIN_AUD_AINL_MIC		PINPOS('H', 1)
> +#define PIN_RSTN			PINPOS('H', 12)
> +#define PIN_PWM0_BUCK			PINPOS('H', 13)
> +#define PIN_SD1_D1			PINPOS('H', 14)
> +#define PIN_SD1_D0			PINPOS('H', 15)
> +#define PIN_AUD_AINR_MIC		PINPOS('J', 1)
> +#define PIN_IIC2_SCL			PINPOS('J', 13)
> +#define PIN_IIC2_SDA			PINPOS('J', 14)
> +#define PIN_SD0_CD			PINPOS('K', 2)
> +#define PIN_SD0_D1			PINPOS('K', 3)
> +#define PIN_UART2_RX			PINPOS('K', 13)
> +#define PIN_UART2_CTS			PINPOS('K', 14)
> +#define PIN_UART2_TX			PINPOS('K', 15)
> +#define PIN_SD0_CLK			PINPOS('L', 1)
> +#define PIN_SD0_D0			PINPOS('L', 2)
> +#define PIN_SD0_CMD			PINPOS('L', 3)
> +#define PIN_CLK32K			PINPOS('L', 14)
> +#define PIN_UART2_RTS			PINPOS('L', 15)
> +#define PIN_SD0_D3			PINPOS('M', 1)
> +#define PIN_SD0_D2			PINPOS('M', 2)
> +#define PIN_UART0_RX			PINPOS('M', 4)
> +#define PIN_UART0_TX			PINPOS('M', 5)
> +#define PIN_JTAG_CPU_TRST		PINPOS('M', 6)
> +#define PIN_PWR_ON			PINPOS('M', 11)
> +#define PIN_PWR_GPIO2			PINPOS('M', 12)
> +#define PIN_PWR_GPIO0			PINPOS('M', 13)
> +#define PIN_CLK25M			PINPOS('M', 14)
> +#define PIN_SD0_PWR_EN			PINPOS('N', 1)
> +#define PIN_SPK_EN			PINPOS('N', 3)
> +#define PIN_JTAG_CPU_TCK		PINPOS('N', 4)
> +#define PIN_JTAG_CPU_TMS		PINPOS('N', 6)
> +#define PIN_PWR_WAKEUP1			PINPOS('N', 11)
> +#define PIN_PWR_WAKEUP0			PINPOS('N', 12)
> +#define PIN_PWR_GPIO1			PINPOS('N', 13)
> +#define PIN_EMMC_DAT3			PINPOS('P', 1)
> +#define PIN_EMMC_DAT0			PINPOS('P', 2)
> +#define PIN_EMMC_DAT2			PINPOS('P', 3)
> +#define PIN_EMMC_RSTN			PINPOS('P', 4)
> +#define PIN_AUX0			PINPOS('P', 5)
> +#define PIN_IIC0_SDA			PINPOS('P', 6)
> +#define PIN_PWR_SEQ3			PINPOS('P', 10)
> +#define PIN_PWR_VBAT_DET		PINPOS('P', 11)
> +#define PIN_PWR_SEQ1			PINPOS('P', 12)
> +#define PIN_PWR_BUTTON1			PINPOS('P', 13)
> +#define PIN_EMMC_DAT1			PINPOS('R', 2)
> +#define PIN_EMMC_CMD			PINPOS('R', 3)
> +#define PIN_EMMC_CLK			PINPOS('R', 4)
> +#define PIN_IIC0_SCL			PINPOS('R', 6)
> +#define PIN_GPIO_ZQ			PINPOS('R', 10)
> +#define PIN_PWR_RSTN			PINPOS('R', 11)
> +#define PIN_PWR_SEQ2			PINPOS('R', 12)
> +#define PIN_XTAL_XIN			PINPOS('R', 13)
> +
> +#endif /* _DT_BINDINGS_PINCTRL_CV1812H_H */
> diff --git a/include/dt-bindings/pinctrl/pinctrl-cv18xx.h b/include/dt-bindings/pinctrl/pinctrl-cv18xx.h
> new file mode 100644
> index 000000000000..bc92ad1067ec
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/pinctrl-cv18xx.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * Copyright (C) 2023 Sophgo Ltd.
> + *
> + * Author: Inochi Amaoto <inochiama@outlook.com>
> + */
> +
> +#ifndef _DT_BINDINGS_PINCTRL_CV18XX_H
> +#define _DT_BINDINGS_PINCTRL_CV18XX_H
> +
> +#define PIN_MUX_INVALD				0xff
> +
> +#define PINMUX2(pin, mux, mux2)	\
> +	(((pin) & 0xffff) | (((mux) & 0xff) << 16) | (((mux2) & 0xff) << 24))
> +
> +#define PINMUX(pin, mux) \
> +	PINMUX2(pin, mux, PIN_MUX_INVALD)
> +
> +#endif /* _DT_BINDINGS_PINCTRL_CV18XX_H */
> diff --git a/include/dt-bindings/pinctrl/pinctrl-sg2000.h b/include/dt-bindings/pinctrl/pinctrl-sg2000.h
> new file mode 100644
> index 000000000000..4871f9a7c6c1
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/pinctrl-sg2000.h
> @@ -0,0 +1,127 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
> + *
> + * This file is generated from vendor pinout definition.
> + */
> +
> +#ifndef _DT_BINDINGS_PINCTRL_SG2000_H
> +#define _DT_BINDINGS_PINCTRL_SG2000_H
> +
> +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> +
> +#define PINPOS(row, col)			\
> +	((((row) - 'A' + 1) << 8) + ((col) - 1))
> +
> +#define PIN_MIPI_TXM4			PINPOS('A', 2)
> +#define PIN_MIPIRX0N			PINPOS('A', 4)
> +#define PIN_MIPIRX3P			PINPOS('A', 6)
> +#define PIN_MIPIRX4P			PINPOS('A', 7)
> +#define PIN_VIVO_D2			PINPOS('A', 9)
> +#define PIN_VIVO_D3			PINPOS('A', 10)
> +#define PIN_VIVO_D10			PINPOS('A', 12)
> +#define PIN_USB_VBUS_DET		PINPOS('A', 13)
> +#define PIN_MIPI_TXP3			PINPOS('B', 1)
> +#define PIN_MIPI_TXM3			PINPOS('B', 2)
> +#define PIN_MIPI_TXP4			PINPOS('B', 3)
> +#define PIN_MIPIRX0P			PINPOS('B', 4)
> +#define PIN_MIPIRX1N			PINPOS('B', 5)
> +#define PIN_MIPIRX2N			PINPOS('B', 6)
> +#define PIN_MIPIRX4N			PINPOS('B', 7)
> +#define PIN_MIPIRX5N			PINPOS('B', 8)
> +#define PIN_VIVO_D1			PINPOS('B', 9)
> +#define PIN_VIVO_D5			PINPOS('B', 10)
> +#define PIN_VIVO_D7			PINPOS('B', 11)
> +#define PIN_VIVO_D9			PINPOS('B', 12)
> +#define PIN_USB_ID			PINPOS('B', 13)
> +#define PIN_ETH_RXM			PINPOS('B', 15)
> +#define PIN_MIPI_TXP2			PINPOS('C', 1)
> +#define PIN_MIPI_TXM2			PINPOS('C', 2)
> +#define PIN_CAM_PD0			PINPOS('C', 3)
> +#define PIN_CAM_MCLK0			PINPOS('C', 4)
> +#define PIN_MIPIRX1P			PINPOS('C', 5)
> +#define PIN_MIPIRX2P			PINPOS('C', 6)
> +#define PIN_MIPIRX3N			PINPOS('C', 7)
> +#define PIN_MIPIRX5P			PINPOS('C', 8)
> +#define PIN_VIVO_CLK			PINPOS('C', 9)
> +#define PIN_VIVO_D6			PINPOS('C', 10)
> +#define PIN_VIVO_D8			PINPOS('C', 11)
> +#define PIN_USB_VBUS_EN			PINPOS('C', 12)
> +#define PIN_ETH_RXP			PINPOS('C', 14)
> +#define PIN_GPIO_RTX			PINPOS('C', 15)
> +#define PIN_MIPI_TXP1			PINPOS('D', 1)
> +#define PIN_MIPI_TXM1			PINPOS('D', 2)
> +#define PIN_CAM_MCLK1			PINPOS('D', 3)
> +#define PIN_IIC3_SCL			PINPOS('D', 4)
> +#define PIN_VIVO_D4			PINPOS('D', 10)
> +#define PIN_ETH_TXM			PINPOS('D', 14)
> +#define PIN_ETH_TXP			PINPOS('D', 15)
> +#define PIN_MIPI_TXP0			PINPOS('E', 1)
> +#define PIN_MIPI_TXM0			PINPOS('E', 2)
> +#define PIN_CAM_PD1			PINPOS('E', 4)
> +#define PIN_CAM_RST0			PINPOS('E', 5)
> +#define PIN_VIVO_D0			PINPOS('E', 10)
> +#define PIN_ADC1			PINPOS('E', 13)
> +#define PIN_ADC2			PINPOS('E', 14)
> +#define PIN_ADC3			PINPOS('E', 15)
> +#define PIN_AUD_AOUTL			PINPOS('F', 2)
> +#define PIN_IIC3_SDA			PINPOS('F', 4)
> +#define PIN_SD1_D2			PINPOS('F', 14)
> +#define PIN_AUD_AOUTR			PINPOS('G', 2)
> +#define PIN_SD1_D3			PINPOS('G', 13)
> +#define PIN_SD1_CLK			PINPOS('G', 14)
> +#define PIN_SD1_CMD			PINPOS('G', 15)
> +#define PIN_AUD_AINL_MIC		PINPOS('H', 1)
> +#define PIN_RSTN			PINPOS('H', 12)
> +#define PIN_PWM0_BUCK			PINPOS('H', 13)
> +#define PIN_SD1_D1			PINPOS('H', 14)
> +#define PIN_SD1_D0			PINPOS('H', 15)
> +#define PIN_AUD_AINR_MIC		PINPOS('J', 1)
> +#define PIN_IIC2_SCL			PINPOS('J', 13)
> +#define PIN_IIC2_SDA			PINPOS('J', 14)
> +#define PIN_SD0_CD			PINPOS('K', 2)
> +#define PIN_SD0_D1			PINPOS('K', 3)
> +#define PIN_UART2_RX			PINPOS('K', 13)
> +#define PIN_UART2_CTS			PINPOS('K', 14)
> +#define PIN_UART2_TX			PINPOS('K', 15)
> +#define PIN_SD0_CLK			PINPOS('L', 1)
> +#define PIN_SD0_D0			PINPOS('L', 2)
> +#define PIN_SD0_CMD			PINPOS('L', 3)
> +#define PIN_CLK32K			PINPOS('L', 14)
> +#define PIN_UART2_RTS			PINPOS('L', 15)
> +#define PIN_SD0_D3			PINPOS('M', 1)
> +#define PIN_SD0_D2			PINPOS('M', 2)
> +#define PIN_UART0_RX			PINPOS('M', 4)
> +#define PIN_UART0_TX			PINPOS('M', 5)
> +#define PIN_JTAG_CPU_TRST		PINPOS('M', 6)
> +#define PIN_PWR_ON			PINPOS('M', 11)
> +#define PIN_PWR_GPIO2			PINPOS('M', 12)
> +#define PIN_PWR_GPIO0			PINPOS('M', 13)
> +#define PIN_CLK25M			PINPOS('M', 14)
> +#define PIN_SD0_PWR_EN			PINPOS('N', 1)
> +#define PIN_SPK_EN			PINPOS('N', 3)
> +#define PIN_JTAG_CPU_TCK		PINPOS('N', 4)
> +#define PIN_JTAG_CPU_TMS		PINPOS('N', 6)
> +#define PIN_PWR_WAKEUP1			PINPOS('N', 11)
> +#define PIN_PWR_WAKEUP0			PINPOS('N', 12)
> +#define PIN_PWR_GPIO1			PINPOS('N', 13)
> +#define PIN_EMMC_DAT3			PINPOS('P', 1)
> +#define PIN_EMMC_DAT0			PINPOS('P', 2)
> +#define PIN_EMMC_DAT2			PINPOS('P', 3)
> +#define PIN_EMMC_RSTN			PINPOS('P', 4)
> +#define PIN_AUX0			PINPOS('P', 5)
> +#define PIN_IIC0_SDA			PINPOS('P', 6)
> +#define PIN_PWR_SEQ3			PINPOS('P', 10)
> +#define PIN_PWR_VBAT_DET		PINPOS('P', 11)
> +#define PIN_PWR_SEQ1			PINPOS('P', 12)
> +#define PIN_PWR_BUTTON1			PINPOS('P', 13)
> +#define PIN_EMMC_DAT1			PINPOS('R', 2)
> +#define PIN_EMMC_CMD			PINPOS('R', 3)
> +#define PIN_EMMC_CLK			PINPOS('R', 4)
> +#define PIN_IIC0_SCL			PINPOS('R', 6)
> +#define PIN_GPIO_ZQ			PINPOS('R', 10)
> +#define PIN_PWR_RSTN			PINPOS('R', 11)
> +#define PIN_PWR_SEQ2			PINPOS('R', 12)
> +#define PIN_XTAL_XIN			PINPOS('R', 13)
> +
> +#endif /* _DT_BINDINGS_PINCTRL_SG2000_H */
> diff --git a/include/dt-bindings/pinctrl/pinctrl-sg2002.h b/include/dt-bindings/pinctrl/pinctrl-sg2002.h
> new file mode 100644
> index 000000000000..3c36cfa0a550
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/pinctrl-sg2002.h
> @@ -0,0 +1,79 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
> + *
> + * This file is generated from vendor pinout definition.
> + */
> +
> +#ifndef _DT_BINDINGS_PINCTRL_SG2002_H
> +#define _DT_BINDINGS_PINCTRL_SG2002_H
> +
> +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> +
> +#define PIN_AUD_AINL_MIC		2
> +#define PIN_AUD_AOUTR			4
> +#define PIN_SD0_CLK			6
> +#define PIN_SD0_CMD			7
> +#define PIN_SD0_D0			8
> +#define PIN_SD0_D1			10
> +#define PIN_SD0_D2			11
> +#define PIN_SD0_D3			12
> +#define PIN_SD0_CD			14
> +#define PIN_SD0_PWR_EN			15
> +#define PIN_SPK_EN			17
> +#define PIN_UART0_TX			18
> +#define PIN_UART0_RX			19
> +#define PIN_EMMC_DAT2			20
> +#define PIN_EMMC_CLK			21
> +#define PIN_EMMC_DAT0			22
> +#define PIN_EMMC_DAT3			23
> +#define PIN_EMMC_CMD			24
> +#define PIN_EMMC_DAT1			25
> +#define PIN_JTAG_CPU_TMS		26
> +#define PIN_JTAG_CPU_TCK		27
> +#define PIN_IIC0_SCL			28
> +#define PIN_IIC0_SDA			29
> +#define PIN_AUX0			30
> +#define PIN_GPIO_ZQ			35
> +#define PIN_PWR_VBAT_DET		38
> +#define PIN_PWR_RSTN			39
> +#define PIN_PWR_SEQ1			40
> +#define PIN_PWR_SEQ2			41
> +#define PIN_PWR_WAKEUP0			43
> +#define PIN_PWR_BUTTON1			44
> +#define PIN_XTAL_XIN			45
> +#define PIN_PWR_GPIO0			47
> +#define PIN_PWR_GPIO1			48
> +#define PIN_PWR_GPIO2			49
> +#define PIN_SD1_D3			51
> +#define PIN_SD1_D2			52
> +#define PIN_SD1_D1			53
> +#define PIN_SD1_D0			54
> +#define PIN_SD1_CMD			55
> +#define PIN_SD1_CLK			56
> +#define PIN_PWM0_BUCK			58
> +#define PIN_ADC1			59
> +#define PIN_USB_VBUS_DET		60
> +#define PIN_ETH_TXP			62
> +#define PIN_ETH_TXM			63
> +#define PIN_ETH_RXP			64
> +#define PIN_ETH_RXM			65
> +#define PIN_GPIO_RTX			67
> +#define PIN_MIPIRX4N			72
> +#define PIN_MIPIRX4P			73
> +#define PIN_MIPIRX3N			74
> +#define PIN_MIPIRX3P			75
> +#define PIN_MIPIRX2N			76
> +#define PIN_MIPIRX2P			77
> +#define PIN_MIPIRX1N			78
> +#define PIN_MIPIRX1P			79
> +#define PIN_MIPIRX0N			80
> +#define PIN_MIPIRX0P			81
> +#define PIN_MIPI_TXM2			83
> +#define PIN_MIPI_TXP2			84
> +#define PIN_MIPI_TXM1			85
> +#define PIN_MIPI_TXP1			86
> +#define PIN_MIPI_TXM0			87
> +#define PIN_MIPI_TXP0			88
> +
> +#endif /* _DT_BINDINGS_PINCTRL_SG2002_H */
> --
> 2.45.2
>
Inochi Amaoto July 12, 2024, 12:36 a.m. UTC | #2
On Mon, Jul 08, 2024 at 10:29:48AM GMT, Rob Herring wrote:
> On Thu, Jul 04, 2024 at 01:46:37PM +0800, Inochi Amaoto wrote:
> > Add pinctrl support for Sophgo CV1800 series SoC.
> > 
> > Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
> > ---
> >  .../pinctrl/sophgo,cv1800-pinctrl.yaml        | 120 +++++++++++++++++
> >  include/dt-bindings/pinctrl/pinctrl-cv1800b.h |  63 +++++++++
> >  include/dt-bindings/pinctrl/pinctrl-cv1812h.h | 127 ++++++++++++++++++
> >  include/dt-bindings/pinctrl/pinctrl-cv18xx.h  |  19 +++
> >  include/dt-bindings/pinctrl/pinctrl-sg2000.h  | 127 ++++++++++++++++++
> >  include/dt-bindings/pinctrl/pinctrl-sg2002.h  |  79 +++++++++++
> >  6 files changed, 535 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> >  create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv1800b.h
> >  create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv1812h.h
> >  create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv18xx.h
> >  create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2000.h
> >  create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2002.h
> > 
> > diff --git a/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> > new file mode 100644
> > index 000000000000..b7e4084b78d6
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> > @@ -0,0 +1,120 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pinctrl/sophgo,cv1800-pinctrl.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Sophgo CV1800 Pin Controller
> > +
> > +maintainers:
> > +  - Inochi Amaoto <inochiama@outlook.com>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - sophgo,cv1800b-pinctrl
> > +      - sophgo,cv1812h-pinctrl
> > +      - sophgo,sg2000-pinctrl
> > +      - sophgo,sg2002-pinctrl
> > +
> > +  reg:
> > +    items:
> > +      - description: pinctrl for system domain
> > +      - description: pinctrl for rtc domain
> 
> Based on the example's addresses, this isn't 1 block, but 2 blocks. Is 
> this really 1 block, 2 instances of the same block, or 2 different 
> blocks?
> 

It is 2 blocks. According to its document, the pin configuration 
is cross referenced.

> > +
> > +  reg-names:
> > +    items:
> > +      - const: sys
> > +      - const: rtc
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +patternProperties:
> > +  '-cfg$':
> > +    type: object
> > +    patternProperties:
> > +      '-pins$':
> > +        type: object
> > +        description: |
> > +          A pinctrl node should contain at least one subnode representing the
> 
> It's the '-cfg' node that 'should contain at least one subnode', not 
> this node.
> 

Thanks, I will update the description.

> > +          pinctrl groups available on the machine. Each subnode will list the
> > +          pins it needs, and how they should be configured, with regard to
> > +          muxer configuration, bias, input enable/disable, input schmitt
> > +          trigger enable/disable, slew-rate and drive strength.
> > +        $ref: /schemas/pinctrl/pincfg-node.yaml
> > +
> > +        properties:
> > +          pinmux:
> > +            description: |
> > +              The list of GPIOs and their mux settings that properties in the
> > +              node apply to. This should be set using the GPIOMUX or GPIOMUX2
> > +              macro.
> > +            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux
> > +
> > +          bias-pull-up:
> > +            type: boolean
> > +
> > +          bias-pull-down:
> > +            type: boolean
> > +
> > +          drive-strength:
> > +            $ref: /schemas/types.yaml#/definitions/uint32
> > +            minimum: 0
> > +            maximum: 7
> > +
> > +          input-schmitt:
> > +            $ref: /schemas/types.yaml#/definitions/uint32
> > +            minimum: 0
> > +            maximum: 7
> > +
> > +          slew-rate:
> > +            enum: [ 0, 1 ]
> > +
> > +          sophgo,bus-holder:
> > +            description: enable bus holder
> > +            type: boolean
> > +
> > +        additionalProperties: false
> > +
> > +    additionalProperties: false
> 
> In the indented cases, put these before properties or patternProperties.
> 
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/pinctrl/pinctrl-cv1800b.h>
> > +
> > +    soc {
> > +        #address-cells = <1>;
> > +        #size-cells = <1>;
> > +
> > +        pinctrl@3001000 {
> > +            compatible = "sophgo,cv1800b-pinctrl";
> > +            reg = <0x03001000 0x1000>,
> > +                  <0x05027000 0x1000>;
> > +            reg-names = "sys", "rtc";
> > +
> > +            uart0_cfg: uart0-cfg {
> > +                uart0-pins {
> > +                    pinmux = <PINMUX(PIN_UART0_TX, 0)>,
> > +                             <PINMUX(PIN_UART0_RX, 0)>;
> > +                    bias-pull-up;
> > +                    drive-strength = <2>;
> > +                    slew-rate = <0>;
> > +                };
> > +            };
> > +        };
> > +
> > +        uart0 {
> > +            pinctrl-0 = <&uart0_cfg>;
> > +            pinctrl-names = "default";
> 
> Not a complete node. Plus the examples for a provider don't show the 
> consumer side and vice-versa. So drop the node.
> 
> > +        };
> > +    };
> > +
> > +...
> > diff --git a/include/dt-bindings/pinctrl/pinctrl-cv1800b.h b/include/dt-bindings/pinctrl/pinctrl-cv1800b.h
> > new file mode 100644
> > index 000000000000..0593fc33d470
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/pinctrl-cv1800b.h
> > @@ -0,0 +1,63 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
> > + *
> > + * This file is generated from vendor pinout definition.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_CV1800B_H
> > +#define _DT_BINDINGS_PINCTRL_CV1800B_H
> > +
> > +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> > +
> > +#define PIN_AUD_AOUTR			1
> > +#define PIN_SD0_CLK			3
> > +#define PIN_SD0_CMD			4
> > +#define PIN_SD0_D0			5
> > +#define PIN_SD0_D1			7
> > +#define PIN_SD0_D2			8
> > +#define PIN_SD0_D3			9
> > +#define PIN_SD0_CD			11
> > +#define PIN_SD0_PWR_EN			12
> > +#define PIN_SPK_EN			14
> > +#define PIN_UART0_TX			15
> > +#define PIN_UART0_RX			16
> > +#define PIN_SPINOR_HOLD_X		17
> > +#define PIN_SPINOR_SCK			18
> > +#define PIN_SPINOR_MOSI			19
> > +#define PIN_SPINOR_WP_X			20
> > +#define PIN_SPINOR_MISO			21
> > +#define PIN_SPINOR_CS_X			22
> > +#define PIN_IIC0_SCL			23
> > +#define PIN_IIC0_SDA			24
> > +#define PIN_AUX0			25
> > +#define PIN_PWR_VBAT_DET		30
> > +#define PIN_PWR_SEQ2			31
> > +#define PIN_XTAL_XIN			33
> > +#define PIN_SD1_GPIO0			35
> > +#define PIN_SD1_GPIO1			36
> > +#define PIN_SD1_D3			38
> > +#define PIN_SD1_D2			39
> > +#define PIN_SD1_D1			40
> > +#define PIN_SD1_D0			41
> > +#define PIN_SD1_CMD			42
> > +#define PIN_SD1_CLK			43
> > +#define PIN_ADC1			44
> > +#define PIN_USB_VBUS_DET		45
> > +#define PIN_ETH_TXP			47
> > +#define PIN_ETH_TXM			48
> > +#define PIN_ETH_RXP			49
> > +#define PIN_ETH_RXM			50
> > +#define PIN_MIPIRX4N			56
> > +#define PIN_MIPIRX4P			57
> > +#define PIN_MIPIRX3N			58
> > +#define PIN_MIPIRX3P			59
> > +#define PIN_MIPIRX2N			60
> > +#define PIN_MIPIRX2P			61
> > +#define PIN_MIPIRX1N			62
> > +#define PIN_MIPIRX1P			63
> > +#define PIN_MIPIRX0N			64
> > +#define PIN_MIPIRX0P			65
> > +#define PIN_AUD_AINL_MIC		67
> > +
> > +#endif /* _DT_BINDINGS_PINCTRL_CV1800B_H */
> > diff --git a/include/dt-bindings/pinctrl/pinctrl-cv1812h.h b/include/dt-bindings/pinctrl/pinctrl-cv1812h.h
> > new file mode 100644
> > index 000000000000..2908de347919
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/pinctrl-cv1812h.h
> > @@ -0,0 +1,127 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
> > + *
> > + * This file is generated from vendor pinout definition.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_CV1812H_H
> > +#define _DT_BINDINGS_PINCTRL_CV1812H_H
> > +
> > +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> > +
> > +#define PINPOS(row, col)			\
> > +	((((row) - 'A' + 1) << 8) + ((col) - 1))
> > +
> > +#define PIN_MIPI_TXM4			PINPOS('A', 2)
> > +#define PIN_MIPIRX0N			PINPOS('A', 4)
> > +#define PIN_MIPIRX3P			PINPOS('A', 6)
> > +#define PIN_MIPIRX4P			PINPOS('A', 7)
> > +#define PIN_VIVO_D2			PINPOS('A', 9)
> > +#define PIN_VIVO_D3			PINPOS('A', 10)
> > +#define PIN_VIVO_D10			PINPOS('A', 12)
> > +#define PIN_USB_VBUS_DET		PINPOS('A', 13)
> > +#define PIN_MIPI_TXP3			PINPOS('B', 1)
> > +#define PIN_MIPI_TXM3			PINPOS('B', 2)
> > +#define PIN_MIPI_TXP4			PINPOS('B', 3)
> > +#define PIN_MIPIRX0P			PINPOS('B', 4)
> > +#define PIN_MIPIRX1N			PINPOS('B', 5)
> > +#define PIN_MIPIRX2N			PINPOS('B', 6)
> > +#define PIN_MIPIRX4N			PINPOS('B', 7)
> > +#define PIN_MIPIRX5N			PINPOS('B', 8)
> > +#define PIN_VIVO_D1			PINPOS('B', 9)
> > +#define PIN_VIVO_D5			PINPOS('B', 10)
> > +#define PIN_VIVO_D7			PINPOS('B', 11)
> > +#define PIN_VIVO_D9			PINPOS('B', 12)
> > +#define PIN_USB_ID			PINPOS('B', 13)
> > +#define PIN_ETH_RXM			PINPOS('B', 15)
> > +#define PIN_MIPI_TXP2			PINPOS('C', 1)
> > +#define PIN_MIPI_TXM2			PINPOS('C', 2)
> > +#define PIN_CAM_PD0			PINPOS('C', 3)
> > +#define PIN_CAM_MCLK0			PINPOS('C', 4)
> > +#define PIN_MIPIRX1P			PINPOS('C', 5)
> > +#define PIN_MIPIRX2P			PINPOS('C', 6)
> > +#define PIN_MIPIRX3N			PINPOS('C', 7)
> > +#define PIN_MIPIRX5P			PINPOS('C', 8)
> > +#define PIN_VIVO_CLK			PINPOS('C', 9)
> > +#define PIN_VIVO_D6			PINPOS('C', 10)
> > +#define PIN_VIVO_D8			PINPOS('C', 11)
> > +#define PIN_USB_VBUS_EN			PINPOS('C', 12)
> > +#define PIN_ETH_RXP			PINPOS('C', 14)
> > +#define PIN_GPIO_RTX			PINPOS('C', 15)
> > +#define PIN_MIPI_TXP1			PINPOS('D', 1)
> > +#define PIN_MIPI_TXM1			PINPOS('D', 2)
> > +#define PIN_CAM_MCLK1			PINPOS('D', 3)
> > +#define PIN_IIC3_SCL			PINPOS('D', 4)
> > +#define PIN_VIVO_D4			PINPOS('D', 10)
> > +#define PIN_ETH_TXM			PINPOS('D', 14)
> > +#define PIN_ETH_TXP			PINPOS('D', 15)
> > +#define PIN_MIPI_TXP0			PINPOS('E', 1)
> > +#define PIN_MIPI_TXM0			PINPOS('E', 2)
> > +#define PIN_CAM_PD1			PINPOS('E', 4)
> > +#define PIN_CAM_RST0			PINPOS('E', 5)
> > +#define PIN_VIVO_D0			PINPOS('E', 10)
> > +#define PIN_ADC1			PINPOS('E', 13)
> > +#define PIN_ADC2			PINPOS('E', 14)
> > +#define PIN_ADC3			PINPOS('E', 15)
> > +#define PIN_AUD_AOUTL			PINPOS('F', 2)
> > +#define PIN_IIC3_SDA			PINPOS('F', 4)
> > +#define PIN_SD1_D2			PINPOS('F', 14)
> > +#define PIN_AUD_AOUTR			PINPOS('G', 2)
> > +#define PIN_SD1_D3			PINPOS('G', 13)
> > +#define PIN_SD1_CLK			PINPOS('G', 14)
> > +#define PIN_SD1_CMD			PINPOS('G', 15)
> > +#define PIN_AUD_AINL_MIC		PINPOS('H', 1)
> > +#define PIN_RSTN			PINPOS('H', 12)
> > +#define PIN_PWM0_BUCK			PINPOS('H', 13)
> > +#define PIN_SD1_D1			PINPOS('H', 14)
> > +#define PIN_SD1_D0			PINPOS('H', 15)
> > +#define PIN_AUD_AINR_MIC		PINPOS('J', 1)
> > +#define PIN_IIC2_SCL			PINPOS('J', 13)
> > +#define PIN_IIC2_SDA			PINPOS('J', 14)
> > +#define PIN_SD0_CD			PINPOS('K', 2)
> > +#define PIN_SD0_D1			PINPOS('K', 3)
> > +#define PIN_UART2_RX			PINPOS('K', 13)
> > +#define PIN_UART2_CTS			PINPOS('K', 14)
> > +#define PIN_UART2_TX			PINPOS('K', 15)
> > +#define PIN_SD0_CLK			PINPOS('L', 1)
> > +#define PIN_SD0_D0			PINPOS('L', 2)
> > +#define PIN_SD0_CMD			PINPOS('L', 3)
> > +#define PIN_CLK32K			PINPOS('L', 14)
> > +#define PIN_UART2_RTS			PINPOS('L', 15)
> > +#define PIN_SD0_D3			PINPOS('M', 1)
> > +#define PIN_SD0_D2			PINPOS('M', 2)
> > +#define PIN_UART0_RX			PINPOS('M', 4)
> > +#define PIN_UART0_TX			PINPOS('M', 5)
> > +#define PIN_JTAG_CPU_TRST		PINPOS('M', 6)
> > +#define PIN_PWR_ON			PINPOS('M', 11)
> > +#define PIN_PWR_GPIO2			PINPOS('M', 12)
> > +#define PIN_PWR_GPIO0			PINPOS('M', 13)
> > +#define PIN_CLK25M			PINPOS('M', 14)
> > +#define PIN_SD0_PWR_EN			PINPOS('N', 1)
> > +#define PIN_SPK_EN			PINPOS('N', 3)
> > +#define PIN_JTAG_CPU_TCK		PINPOS('N', 4)
> > +#define PIN_JTAG_CPU_TMS		PINPOS('N', 6)
> > +#define PIN_PWR_WAKEUP1			PINPOS('N', 11)
> > +#define PIN_PWR_WAKEUP0			PINPOS('N', 12)
> > +#define PIN_PWR_GPIO1			PINPOS('N', 13)
> > +#define PIN_EMMC_DAT3			PINPOS('P', 1)
> > +#define PIN_EMMC_DAT0			PINPOS('P', 2)
> > +#define PIN_EMMC_DAT2			PINPOS('P', 3)
> > +#define PIN_EMMC_RSTN			PINPOS('P', 4)
> > +#define PIN_AUX0			PINPOS('P', 5)
> > +#define PIN_IIC0_SDA			PINPOS('P', 6)
> > +#define PIN_PWR_SEQ3			PINPOS('P', 10)
> > +#define PIN_PWR_VBAT_DET		PINPOS('P', 11)
> > +#define PIN_PWR_SEQ1			PINPOS('P', 12)
> > +#define PIN_PWR_BUTTON1			PINPOS('P', 13)
> > +#define PIN_EMMC_DAT1			PINPOS('R', 2)
> > +#define PIN_EMMC_CMD			PINPOS('R', 3)
> > +#define PIN_EMMC_CLK			PINPOS('R', 4)
> > +#define PIN_IIC0_SCL			PINPOS('R', 6)
> > +#define PIN_GPIO_ZQ			PINPOS('R', 10)
> > +#define PIN_PWR_RSTN			PINPOS('R', 11)
> > +#define PIN_PWR_SEQ2			PINPOS('R', 12)
> > +#define PIN_XTAL_XIN			PINPOS('R', 13)
> > +
> > +#endif /* _DT_BINDINGS_PINCTRL_CV1812H_H */
> > diff --git a/include/dt-bindings/pinctrl/pinctrl-cv18xx.h b/include/dt-bindings/pinctrl/pinctrl-cv18xx.h
> > new file mode 100644
> > index 000000000000..bc92ad1067ec
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/pinctrl-cv18xx.h
> > @@ -0,0 +1,19 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * Copyright (C) 2023 Sophgo Ltd.
> > + *
> > + * Author: Inochi Amaoto <inochiama@outlook.com>
> > + */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_CV18XX_H
> > +#define _DT_BINDINGS_PINCTRL_CV18XX_H
> > +
> > +#define PIN_MUX_INVALD				0xff
> > +
> > +#define PINMUX2(pin, mux, mux2)	\
> > +	(((pin) & 0xffff) | (((mux) & 0xff) << 16) | (((mux2) & 0xff) << 24))
> > +
> > +#define PINMUX(pin, mux) \
> > +	PINMUX2(pin, mux, PIN_MUX_INVALD)
> > +
> > +#endif /* _DT_BINDINGS_PINCTRL_CV18XX_H */
> > diff --git a/include/dt-bindings/pinctrl/pinctrl-sg2000.h b/include/dt-bindings/pinctrl/pinctrl-sg2000.h
> > new file mode 100644
> > index 000000000000..4871f9a7c6c1
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/pinctrl-sg2000.h
> > @@ -0,0 +1,127 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
> > + *
> > + * This file is generated from vendor pinout definition.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_SG2000_H
> > +#define _DT_BINDINGS_PINCTRL_SG2000_H
> > +
> > +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> > +
> > +#define PINPOS(row, col)			\
> > +	((((row) - 'A' + 1) << 8) + ((col) - 1))
> > +
> > +#define PIN_MIPI_TXM4			PINPOS('A', 2)
> > +#define PIN_MIPIRX0N			PINPOS('A', 4)
> > +#define PIN_MIPIRX3P			PINPOS('A', 6)
> > +#define PIN_MIPIRX4P			PINPOS('A', 7)
> > +#define PIN_VIVO_D2			PINPOS('A', 9)
> > +#define PIN_VIVO_D3			PINPOS('A', 10)
> > +#define PIN_VIVO_D10			PINPOS('A', 12)
> > +#define PIN_USB_VBUS_DET		PINPOS('A', 13)
> > +#define PIN_MIPI_TXP3			PINPOS('B', 1)
> > +#define PIN_MIPI_TXM3			PINPOS('B', 2)
> > +#define PIN_MIPI_TXP4			PINPOS('B', 3)
> > +#define PIN_MIPIRX0P			PINPOS('B', 4)
> > +#define PIN_MIPIRX1N			PINPOS('B', 5)
> > +#define PIN_MIPIRX2N			PINPOS('B', 6)
> > +#define PIN_MIPIRX4N			PINPOS('B', 7)
> > +#define PIN_MIPIRX5N			PINPOS('B', 8)
> > +#define PIN_VIVO_D1			PINPOS('B', 9)
> > +#define PIN_VIVO_D5			PINPOS('B', 10)
> > +#define PIN_VIVO_D7			PINPOS('B', 11)
> > +#define PIN_VIVO_D9			PINPOS('B', 12)
> > +#define PIN_USB_ID			PINPOS('B', 13)
> > +#define PIN_ETH_RXM			PINPOS('B', 15)
> > +#define PIN_MIPI_TXP2			PINPOS('C', 1)
> > +#define PIN_MIPI_TXM2			PINPOS('C', 2)
> > +#define PIN_CAM_PD0			PINPOS('C', 3)
> > +#define PIN_CAM_MCLK0			PINPOS('C', 4)
> > +#define PIN_MIPIRX1P			PINPOS('C', 5)
> > +#define PIN_MIPIRX2P			PINPOS('C', 6)
> > +#define PIN_MIPIRX3N			PINPOS('C', 7)
> > +#define PIN_MIPIRX5P			PINPOS('C', 8)
> > +#define PIN_VIVO_CLK			PINPOS('C', 9)
> > +#define PIN_VIVO_D6			PINPOS('C', 10)
> > +#define PIN_VIVO_D8			PINPOS('C', 11)
> > +#define PIN_USB_VBUS_EN			PINPOS('C', 12)
> > +#define PIN_ETH_RXP			PINPOS('C', 14)
> > +#define PIN_GPIO_RTX			PINPOS('C', 15)
> > +#define PIN_MIPI_TXP1			PINPOS('D', 1)
> > +#define PIN_MIPI_TXM1			PINPOS('D', 2)
> > +#define PIN_CAM_MCLK1			PINPOS('D', 3)
> > +#define PIN_IIC3_SCL			PINPOS('D', 4)
> > +#define PIN_VIVO_D4			PINPOS('D', 10)
> > +#define PIN_ETH_TXM			PINPOS('D', 14)
> > +#define PIN_ETH_TXP			PINPOS('D', 15)
> > +#define PIN_MIPI_TXP0			PINPOS('E', 1)
> > +#define PIN_MIPI_TXM0			PINPOS('E', 2)
> > +#define PIN_CAM_PD1			PINPOS('E', 4)
> > +#define PIN_CAM_RST0			PINPOS('E', 5)
> > +#define PIN_VIVO_D0			PINPOS('E', 10)
> > +#define PIN_ADC1			PINPOS('E', 13)
> > +#define PIN_ADC2			PINPOS('E', 14)
> > +#define PIN_ADC3			PINPOS('E', 15)
> > +#define PIN_AUD_AOUTL			PINPOS('F', 2)
> > +#define PIN_IIC3_SDA			PINPOS('F', 4)
> > +#define PIN_SD1_D2			PINPOS('F', 14)
> > +#define PIN_AUD_AOUTR			PINPOS('G', 2)
> > +#define PIN_SD1_D3			PINPOS('G', 13)
> > +#define PIN_SD1_CLK			PINPOS('G', 14)
> > +#define PIN_SD1_CMD			PINPOS('G', 15)
> > +#define PIN_AUD_AINL_MIC		PINPOS('H', 1)
> > +#define PIN_RSTN			PINPOS('H', 12)
> > +#define PIN_PWM0_BUCK			PINPOS('H', 13)
> > +#define PIN_SD1_D1			PINPOS('H', 14)
> > +#define PIN_SD1_D0			PINPOS('H', 15)
> > +#define PIN_AUD_AINR_MIC		PINPOS('J', 1)
> > +#define PIN_IIC2_SCL			PINPOS('J', 13)
> > +#define PIN_IIC2_SDA			PINPOS('J', 14)
> > +#define PIN_SD0_CD			PINPOS('K', 2)
> > +#define PIN_SD0_D1			PINPOS('K', 3)
> > +#define PIN_UART2_RX			PINPOS('K', 13)
> > +#define PIN_UART2_CTS			PINPOS('K', 14)
> > +#define PIN_UART2_TX			PINPOS('K', 15)
> > +#define PIN_SD0_CLK			PINPOS('L', 1)
> > +#define PIN_SD0_D0			PINPOS('L', 2)
> > +#define PIN_SD0_CMD			PINPOS('L', 3)
> > +#define PIN_CLK32K			PINPOS('L', 14)
> > +#define PIN_UART2_RTS			PINPOS('L', 15)
> > +#define PIN_SD0_D3			PINPOS('M', 1)
> > +#define PIN_SD0_D2			PINPOS('M', 2)
> > +#define PIN_UART0_RX			PINPOS('M', 4)
> > +#define PIN_UART0_TX			PINPOS('M', 5)
> > +#define PIN_JTAG_CPU_TRST		PINPOS('M', 6)
> > +#define PIN_PWR_ON			PINPOS('M', 11)
> > +#define PIN_PWR_GPIO2			PINPOS('M', 12)
> > +#define PIN_PWR_GPIO0			PINPOS('M', 13)
> > +#define PIN_CLK25M			PINPOS('M', 14)
> > +#define PIN_SD0_PWR_EN			PINPOS('N', 1)
> > +#define PIN_SPK_EN			PINPOS('N', 3)
> > +#define PIN_JTAG_CPU_TCK		PINPOS('N', 4)
> > +#define PIN_JTAG_CPU_TMS		PINPOS('N', 6)
> > +#define PIN_PWR_WAKEUP1			PINPOS('N', 11)
> > +#define PIN_PWR_WAKEUP0			PINPOS('N', 12)
> > +#define PIN_PWR_GPIO1			PINPOS('N', 13)
> > +#define PIN_EMMC_DAT3			PINPOS('P', 1)
> > +#define PIN_EMMC_DAT0			PINPOS('P', 2)
> > +#define PIN_EMMC_DAT2			PINPOS('P', 3)
> > +#define PIN_EMMC_RSTN			PINPOS('P', 4)
> > +#define PIN_AUX0			PINPOS('P', 5)
> > +#define PIN_IIC0_SDA			PINPOS('P', 6)
> > +#define PIN_PWR_SEQ3			PINPOS('P', 10)
> > +#define PIN_PWR_VBAT_DET		PINPOS('P', 11)
> > +#define PIN_PWR_SEQ1			PINPOS('P', 12)
> > +#define PIN_PWR_BUTTON1			PINPOS('P', 13)
> > +#define PIN_EMMC_DAT1			PINPOS('R', 2)
> > +#define PIN_EMMC_CMD			PINPOS('R', 3)
> > +#define PIN_EMMC_CLK			PINPOS('R', 4)
> > +#define PIN_IIC0_SCL			PINPOS('R', 6)
> > +#define PIN_GPIO_ZQ			PINPOS('R', 10)
> > +#define PIN_PWR_RSTN			PINPOS('R', 11)
> > +#define PIN_PWR_SEQ2			PINPOS('R', 12)
> > +#define PIN_XTAL_XIN			PINPOS('R', 13)
> > +
> > +#endif /* _DT_BINDINGS_PINCTRL_SG2000_H */
> > diff --git a/include/dt-bindings/pinctrl/pinctrl-sg2002.h b/include/dt-bindings/pinctrl/pinctrl-sg2002.h
> > new file mode 100644
> > index 000000000000..3c36cfa0a550
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/pinctrl-sg2002.h
> > @@ -0,0 +1,79 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
> > + *
> > + * This file is generated from vendor pinout definition.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_SG2002_H
> > +#define _DT_BINDINGS_PINCTRL_SG2002_H
> > +
> > +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> > +
> > +#define PIN_AUD_AINL_MIC		2
> > +#define PIN_AUD_AOUTR			4
> > +#define PIN_SD0_CLK			6
> > +#define PIN_SD0_CMD			7
> > +#define PIN_SD0_D0			8
> > +#define PIN_SD0_D1			10
> > +#define PIN_SD0_D2			11
> > +#define PIN_SD0_D3			12
> > +#define PIN_SD0_CD			14
> > +#define PIN_SD0_PWR_EN			15
> > +#define PIN_SPK_EN			17
> > +#define PIN_UART0_TX			18
> > +#define PIN_UART0_RX			19
> > +#define PIN_EMMC_DAT2			20
> > +#define PIN_EMMC_CLK			21
> > +#define PIN_EMMC_DAT0			22
> > +#define PIN_EMMC_DAT3			23
> > +#define PIN_EMMC_CMD			24
> > +#define PIN_EMMC_DAT1			25
> > +#define PIN_JTAG_CPU_TMS		26
> > +#define PIN_JTAG_CPU_TCK		27
> > +#define PIN_IIC0_SCL			28
> > +#define PIN_IIC0_SDA			29
> > +#define PIN_AUX0			30
> > +#define PIN_GPIO_ZQ			35
> > +#define PIN_PWR_VBAT_DET		38
> > +#define PIN_PWR_RSTN			39
> > +#define PIN_PWR_SEQ1			40
> > +#define PIN_PWR_SEQ2			41
> > +#define PIN_PWR_WAKEUP0			43
> > +#define PIN_PWR_BUTTON1			44
> > +#define PIN_XTAL_XIN			45
> > +#define PIN_PWR_GPIO0			47
> > +#define PIN_PWR_GPIO1			48
> > +#define PIN_PWR_GPIO2			49
> > +#define PIN_SD1_D3			51
> > +#define PIN_SD1_D2			52
> > +#define PIN_SD1_D1			53
> > +#define PIN_SD1_D0			54
> > +#define PIN_SD1_CMD			55
> > +#define PIN_SD1_CLK			56
> > +#define PIN_PWM0_BUCK			58
> > +#define PIN_ADC1			59
> > +#define PIN_USB_VBUS_DET		60
> > +#define PIN_ETH_TXP			62
> > +#define PIN_ETH_TXM			63
> > +#define PIN_ETH_RXP			64
> > +#define PIN_ETH_RXM			65
> > +#define PIN_GPIO_RTX			67
> > +#define PIN_MIPIRX4N			72
> > +#define PIN_MIPIRX4P			73
> > +#define PIN_MIPIRX3N			74
> > +#define PIN_MIPIRX3P			75
> > +#define PIN_MIPIRX2N			76
> > +#define PIN_MIPIRX2P			77
> > +#define PIN_MIPIRX1N			78
> > +#define PIN_MIPIRX1P			79
> > +#define PIN_MIPIRX0N			80
> > +#define PIN_MIPIRX0P			81
> > +#define PIN_MIPI_TXM2			83
> > +#define PIN_MIPI_TXP2			84
> > +#define PIN_MIPI_TXM1			85
> > +#define PIN_MIPI_TXP1			86
> > +#define PIN_MIPI_TXM0			87
> > +#define PIN_MIPI_TXP0			88
> > +
> > +#endif /* _DT_BINDINGS_PINCTRL_SG2002_H */
> > --
> > 2.45.2
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
new file mode 100644
index 000000000000..b7e4084b78d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
@@ -0,0 +1,120 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/sophgo,cv1800-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800 Pin Controller
+
+maintainers:
+  - Inochi Amaoto <inochiama@outlook.com>
+
+properties:
+  compatible:
+    enum:
+      - sophgo,cv1800b-pinctrl
+      - sophgo,cv1812h-pinctrl
+      - sophgo,sg2000-pinctrl
+      - sophgo,sg2002-pinctrl
+
+  reg:
+    items:
+      - description: pinctrl for system domain
+      - description: pinctrl for rtc domain
+
+  reg-names:
+    items:
+      - const: sys
+      - const: rtc
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  '-cfg$':
+    type: object
+    patternProperties:
+      '-pins$':
+        type: object
+        description: |
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to
+          muxer configuration, bias, input enable/disable, input schmitt
+          trigger enable/disable, slew-rate and drive strength.
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+
+        properties:
+          pinmux:
+            description: |
+              The list of GPIOs and their mux settings that properties in the
+              node apply to. This should be set using the GPIOMUX or GPIOMUX2
+              macro.
+            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux
+
+          bias-pull-up:
+            type: boolean
+
+          bias-pull-down:
+            type: boolean
+
+          drive-strength:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 7
+
+          input-schmitt:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 7
+
+          slew-rate:
+            enum: [ 0, 1 ]
+
+          sophgo,bus-holder:
+            description: enable bus holder
+            type: boolean
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-cv1800b.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        pinctrl@3001000 {
+            compatible = "sophgo,cv1800b-pinctrl";
+            reg = <0x03001000 0x1000>,
+                  <0x05027000 0x1000>;
+            reg-names = "sys", "rtc";
+
+            uart0_cfg: uart0-cfg {
+                uart0-pins {
+                    pinmux = <PINMUX(PIN_UART0_TX, 0)>,
+                             <PINMUX(PIN_UART0_RX, 0)>;
+                    bias-pull-up;
+                    drive-strength = <2>;
+                    slew-rate = <0>;
+                };
+            };
+        };
+
+        uart0 {
+            pinctrl-0 = <&uart0_cfg>;
+            pinctrl-names = "default";
+        };
+    };
+
+...
diff --git a/include/dt-bindings/pinctrl/pinctrl-cv1800b.h b/include/dt-bindings/pinctrl/pinctrl-cv1800b.h
new file mode 100644
index 000000000000..0593fc33d470
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-cv1800b.h
@@ -0,0 +1,63 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_CV1800B_H
+#define _DT_BINDINGS_PINCTRL_CV1800B_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PIN_AUD_AOUTR			1
+#define PIN_SD0_CLK			3
+#define PIN_SD0_CMD			4
+#define PIN_SD0_D0			5
+#define PIN_SD0_D1			7
+#define PIN_SD0_D2			8
+#define PIN_SD0_D3			9
+#define PIN_SD0_CD			11
+#define PIN_SD0_PWR_EN			12
+#define PIN_SPK_EN			14
+#define PIN_UART0_TX			15
+#define PIN_UART0_RX			16
+#define PIN_SPINOR_HOLD_X		17
+#define PIN_SPINOR_SCK			18
+#define PIN_SPINOR_MOSI			19
+#define PIN_SPINOR_WP_X			20
+#define PIN_SPINOR_MISO			21
+#define PIN_SPINOR_CS_X			22
+#define PIN_IIC0_SCL			23
+#define PIN_IIC0_SDA			24
+#define PIN_AUX0			25
+#define PIN_PWR_VBAT_DET		30
+#define PIN_PWR_SEQ2			31
+#define PIN_XTAL_XIN			33
+#define PIN_SD1_GPIO0			35
+#define PIN_SD1_GPIO1			36
+#define PIN_SD1_D3			38
+#define PIN_SD1_D2			39
+#define PIN_SD1_D1			40
+#define PIN_SD1_D0			41
+#define PIN_SD1_CMD			42
+#define PIN_SD1_CLK			43
+#define PIN_ADC1			44
+#define PIN_USB_VBUS_DET		45
+#define PIN_ETH_TXP			47
+#define PIN_ETH_TXM			48
+#define PIN_ETH_RXP			49
+#define PIN_ETH_RXM			50
+#define PIN_MIPIRX4N			56
+#define PIN_MIPIRX4P			57
+#define PIN_MIPIRX3N			58
+#define PIN_MIPIRX3P			59
+#define PIN_MIPIRX2N			60
+#define PIN_MIPIRX2P			61
+#define PIN_MIPIRX1N			62
+#define PIN_MIPIRX1P			63
+#define PIN_MIPIRX0N			64
+#define PIN_MIPIRX0P			65
+#define PIN_AUD_AINL_MIC		67
+
+#endif /* _DT_BINDINGS_PINCTRL_CV1800B_H */
diff --git a/include/dt-bindings/pinctrl/pinctrl-cv1812h.h b/include/dt-bindings/pinctrl/pinctrl-cv1812h.h
new file mode 100644
index 000000000000..2908de347919
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-cv1812h.h
@@ -0,0 +1,127 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_CV1812H_H
+#define _DT_BINDINGS_PINCTRL_CV1812H_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PINPOS(row, col)			\
+	((((row) - 'A' + 1) << 8) + ((col) - 1))
+
+#define PIN_MIPI_TXM4			PINPOS('A', 2)
+#define PIN_MIPIRX0N			PINPOS('A', 4)
+#define PIN_MIPIRX3P			PINPOS('A', 6)
+#define PIN_MIPIRX4P			PINPOS('A', 7)
+#define PIN_VIVO_D2			PINPOS('A', 9)
+#define PIN_VIVO_D3			PINPOS('A', 10)
+#define PIN_VIVO_D10			PINPOS('A', 12)
+#define PIN_USB_VBUS_DET		PINPOS('A', 13)
+#define PIN_MIPI_TXP3			PINPOS('B', 1)
+#define PIN_MIPI_TXM3			PINPOS('B', 2)
+#define PIN_MIPI_TXP4			PINPOS('B', 3)
+#define PIN_MIPIRX0P			PINPOS('B', 4)
+#define PIN_MIPIRX1N			PINPOS('B', 5)
+#define PIN_MIPIRX2N			PINPOS('B', 6)
+#define PIN_MIPIRX4N			PINPOS('B', 7)
+#define PIN_MIPIRX5N			PINPOS('B', 8)
+#define PIN_VIVO_D1			PINPOS('B', 9)
+#define PIN_VIVO_D5			PINPOS('B', 10)
+#define PIN_VIVO_D7			PINPOS('B', 11)
+#define PIN_VIVO_D9			PINPOS('B', 12)
+#define PIN_USB_ID			PINPOS('B', 13)
+#define PIN_ETH_RXM			PINPOS('B', 15)
+#define PIN_MIPI_TXP2			PINPOS('C', 1)
+#define PIN_MIPI_TXM2			PINPOS('C', 2)
+#define PIN_CAM_PD0			PINPOS('C', 3)
+#define PIN_CAM_MCLK0			PINPOS('C', 4)
+#define PIN_MIPIRX1P			PINPOS('C', 5)
+#define PIN_MIPIRX2P			PINPOS('C', 6)
+#define PIN_MIPIRX3N			PINPOS('C', 7)
+#define PIN_MIPIRX5P			PINPOS('C', 8)
+#define PIN_VIVO_CLK			PINPOS('C', 9)
+#define PIN_VIVO_D6			PINPOS('C', 10)
+#define PIN_VIVO_D8			PINPOS('C', 11)
+#define PIN_USB_VBUS_EN			PINPOS('C', 12)
+#define PIN_ETH_RXP			PINPOS('C', 14)
+#define PIN_GPIO_RTX			PINPOS('C', 15)
+#define PIN_MIPI_TXP1			PINPOS('D', 1)
+#define PIN_MIPI_TXM1			PINPOS('D', 2)
+#define PIN_CAM_MCLK1			PINPOS('D', 3)
+#define PIN_IIC3_SCL			PINPOS('D', 4)
+#define PIN_VIVO_D4			PINPOS('D', 10)
+#define PIN_ETH_TXM			PINPOS('D', 14)
+#define PIN_ETH_TXP			PINPOS('D', 15)
+#define PIN_MIPI_TXP0			PINPOS('E', 1)
+#define PIN_MIPI_TXM0			PINPOS('E', 2)
+#define PIN_CAM_PD1			PINPOS('E', 4)
+#define PIN_CAM_RST0			PINPOS('E', 5)
+#define PIN_VIVO_D0			PINPOS('E', 10)
+#define PIN_ADC1			PINPOS('E', 13)
+#define PIN_ADC2			PINPOS('E', 14)
+#define PIN_ADC3			PINPOS('E', 15)
+#define PIN_AUD_AOUTL			PINPOS('F', 2)
+#define PIN_IIC3_SDA			PINPOS('F', 4)
+#define PIN_SD1_D2			PINPOS('F', 14)
+#define PIN_AUD_AOUTR			PINPOS('G', 2)
+#define PIN_SD1_D3			PINPOS('G', 13)
+#define PIN_SD1_CLK			PINPOS('G', 14)
+#define PIN_SD1_CMD			PINPOS('G', 15)
+#define PIN_AUD_AINL_MIC		PINPOS('H', 1)
+#define PIN_RSTN			PINPOS('H', 12)
+#define PIN_PWM0_BUCK			PINPOS('H', 13)
+#define PIN_SD1_D1			PINPOS('H', 14)
+#define PIN_SD1_D0			PINPOS('H', 15)
+#define PIN_AUD_AINR_MIC		PINPOS('J', 1)
+#define PIN_IIC2_SCL			PINPOS('J', 13)
+#define PIN_IIC2_SDA			PINPOS('J', 14)
+#define PIN_SD0_CD			PINPOS('K', 2)
+#define PIN_SD0_D1			PINPOS('K', 3)
+#define PIN_UART2_RX			PINPOS('K', 13)
+#define PIN_UART2_CTS			PINPOS('K', 14)
+#define PIN_UART2_TX			PINPOS('K', 15)
+#define PIN_SD0_CLK			PINPOS('L', 1)
+#define PIN_SD0_D0			PINPOS('L', 2)
+#define PIN_SD0_CMD			PINPOS('L', 3)
+#define PIN_CLK32K			PINPOS('L', 14)
+#define PIN_UART2_RTS			PINPOS('L', 15)
+#define PIN_SD0_D3			PINPOS('M', 1)
+#define PIN_SD0_D2			PINPOS('M', 2)
+#define PIN_UART0_RX			PINPOS('M', 4)
+#define PIN_UART0_TX			PINPOS('M', 5)
+#define PIN_JTAG_CPU_TRST		PINPOS('M', 6)
+#define PIN_PWR_ON			PINPOS('M', 11)
+#define PIN_PWR_GPIO2			PINPOS('M', 12)
+#define PIN_PWR_GPIO0			PINPOS('M', 13)
+#define PIN_CLK25M			PINPOS('M', 14)
+#define PIN_SD0_PWR_EN			PINPOS('N', 1)
+#define PIN_SPK_EN			PINPOS('N', 3)
+#define PIN_JTAG_CPU_TCK		PINPOS('N', 4)
+#define PIN_JTAG_CPU_TMS		PINPOS('N', 6)
+#define PIN_PWR_WAKEUP1			PINPOS('N', 11)
+#define PIN_PWR_WAKEUP0			PINPOS('N', 12)
+#define PIN_PWR_GPIO1			PINPOS('N', 13)
+#define PIN_EMMC_DAT3			PINPOS('P', 1)
+#define PIN_EMMC_DAT0			PINPOS('P', 2)
+#define PIN_EMMC_DAT2			PINPOS('P', 3)
+#define PIN_EMMC_RSTN			PINPOS('P', 4)
+#define PIN_AUX0			PINPOS('P', 5)
+#define PIN_IIC0_SDA			PINPOS('P', 6)
+#define PIN_PWR_SEQ3			PINPOS('P', 10)
+#define PIN_PWR_VBAT_DET		PINPOS('P', 11)
+#define PIN_PWR_SEQ1			PINPOS('P', 12)
+#define PIN_PWR_BUTTON1			PINPOS('P', 13)
+#define PIN_EMMC_DAT1			PINPOS('R', 2)
+#define PIN_EMMC_CMD			PINPOS('R', 3)
+#define PIN_EMMC_CLK			PINPOS('R', 4)
+#define PIN_IIC0_SCL			PINPOS('R', 6)
+#define PIN_GPIO_ZQ			PINPOS('R', 10)
+#define PIN_PWR_RSTN			PINPOS('R', 11)
+#define PIN_PWR_SEQ2			PINPOS('R', 12)
+#define PIN_XTAL_XIN			PINPOS('R', 13)
+
+#endif /* _DT_BINDINGS_PINCTRL_CV1812H_H */
diff --git a/include/dt-bindings/pinctrl/pinctrl-cv18xx.h b/include/dt-bindings/pinctrl/pinctrl-cv18xx.h
new file mode 100644
index 000000000000..bc92ad1067ec
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-cv18xx.h
@@ -0,0 +1,19 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2023 Sophgo Ltd.
+ *
+ * Author: Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_CV18XX_H
+#define _DT_BINDINGS_PINCTRL_CV18XX_H
+
+#define PIN_MUX_INVALD				0xff
+
+#define PINMUX2(pin, mux, mux2)	\
+	(((pin) & 0xffff) | (((mux) & 0xff) << 16) | (((mux2) & 0xff) << 24))
+
+#define PINMUX(pin, mux) \
+	PINMUX2(pin, mux, PIN_MUX_INVALD)
+
+#endif /* _DT_BINDINGS_PINCTRL_CV18XX_H */
diff --git a/include/dt-bindings/pinctrl/pinctrl-sg2000.h b/include/dt-bindings/pinctrl/pinctrl-sg2000.h
new file mode 100644
index 000000000000..4871f9a7c6c1
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-sg2000.h
@@ -0,0 +1,127 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_SG2000_H
+#define _DT_BINDINGS_PINCTRL_SG2000_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PINPOS(row, col)			\
+	((((row) - 'A' + 1) << 8) + ((col) - 1))
+
+#define PIN_MIPI_TXM4			PINPOS('A', 2)
+#define PIN_MIPIRX0N			PINPOS('A', 4)
+#define PIN_MIPIRX3P			PINPOS('A', 6)
+#define PIN_MIPIRX4P			PINPOS('A', 7)
+#define PIN_VIVO_D2			PINPOS('A', 9)
+#define PIN_VIVO_D3			PINPOS('A', 10)
+#define PIN_VIVO_D10			PINPOS('A', 12)
+#define PIN_USB_VBUS_DET		PINPOS('A', 13)
+#define PIN_MIPI_TXP3			PINPOS('B', 1)
+#define PIN_MIPI_TXM3			PINPOS('B', 2)
+#define PIN_MIPI_TXP4			PINPOS('B', 3)
+#define PIN_MIPIRX0P			PINPOS('B', 4)
+#define PIN_MIPIRX1N			PINPOS('B', 5)
+#define PIN_MIPIRX2N			PINPOS('B', 6)
+#define PIN_MIPIRX4N			PINPOS('B', 7)
+#define PIN_MIPIRX5N			PINPOS('B', 8)
+#define PIN_VIVO_D1			PINPOS('B', 9)
+#define PIN_VIVO_D5			PINPOS('B', 10)
+#define PIN_VIVO_D7			PINPOS('B', 11)
+#define PIN_VIVO_D9			PINPOS('B', 12)
+#define PIN_USB_ID			PINPOS('B', 13)
+#define PIN_ETH_RXM			PINPOS('B', 15)
+#define PIN_MIPI_TXP2			PINPOS('C', 1)
+#define PIN_MIPI_TXM2			PINPOS('C', 2)
+#define PIN_CAM_PD0			PINPOS('C', 3)
+#define PIN_CAM_MCLK0			PINPOS('C', 4)
+#define PIN_MIPIRX1P			PINPOS('C', 5)
+#define PIN_MIPIRX2P			PINPOS('C', 6)
+#define PIN_MIPIRX3N			PINPOS('C', 7)
+#define PIN_MIPIRX5P			PINPOS('C', 8)
+#define PIN_VIVO_CLK			PINPOS('C', 9)
+#define PIN_VIVO_D6			PINPOS('C', 10)
+#define PIN_VIVO_D8			PINPOS('C', 11)
+#define PIN_USB_VBUS_EN			PINPOS('C', 12)
+#define PIN_ETH_RXP			PINPOS('C', 14)
+#define PIN_GPIO_RTX			PINPOS('C', 15)
+#define PIN_MIPI_TXP1			PINPOS('D', 1)
+#define PIN_MIPI_TXM1			PINPOS('D', 2)
+#define PIN_CAM_MCLK1			PINPOS('D', 3)
+#define PIN_IIC3_SCL			PINPOS('D', 4)
+#define PIN_VIVO_D4			PINPOS('D', 10)
+#define PIN_ETH_TXM			PINPOS('D', 14)
+#define PIN_ETH_TXP			PINPOS('D', 15)
+#define PIN_MIPI_TXP0			PINPOS('E', 1)
+#define PIN_MIPI_TXM0			PINPOS('E', 2)
+#define PIN_CAM_PD1			PINPOS('E', 4)
+#define PIN_CAM_RST0			PINPOS('E', 5)
+#define PIN_VIVO_D0			PINPOS('E', 10)
+#define PIN_ADC1			PINPOS('E', 13)
+#define PIN_ADC2			PINPOS('E', 14)
+#define PIN_ADC3			PINPOS('E', 15)
+#define PIN_AUD_AOUTL			PINPOS('F', 2)
+#define PIN_IIC3_SDA			PINPOS('F', 4)
+#define PIN_SD1_D2			PINPOS('F', 14)
+#define PIN_AUD_AOUTR			PINPOS('G', 2)
+#define PIN_SD1_D3			PINPOS('G', 13)
+#define PIN_SD1_CLK			PINPOS('G', 14)
+#define PIN_SD1_CMD			PINPOS('G', 15)
+#define PIN_AUD_AINL_MIC		PINPOS('H', 1)
+#define PIN_RSTN			PINPOS('H', 12)
+#define PIN_PWM0_BUCK			PINPOS('H', 13)
+#define PIN_SD1_D1			PINPOS('H', 14)
+#define PIN_SD1_D0			PINPOS('H', 15)
+#define PIN_AUD_AINR_MIC		PINPOS('J', 1)
+#define PIN_IIC2_SCL			PINPOS('J', 13)
+#define PIN_IIC2_SDA			PINPOS('J', 14)
+#define PIN_SD0_CD			PINPOS('K', 2)
+#define PIN_SD0_D1			PINPOS('K', 3)
+#define PIN_UART2_RX			PINPOS('K', 13)
+#define PIN_UART2_CTS			PINPOS('K', 14)
+#define PIN_UART2_TX			PINPOS('K', 15)
+#define PIN_SD0_CLK			PINPOS('L', 1)
+#define PIN_SD0_D0			PINPOS('L', 2)
+#define PIN_SD0_CMD			PINPOS('L', 3)
+#define PIN_CLK32K			PINPOS('L', 14)
+#define PIN_UART2_RTS			PINPOS('L', 15)
+#define PIN_SD0_D3			PINPOS('M', 1)
+#define PIN_SD0_D2			PINPOS('M', 2)
+#define PIN_UART0_RX			PINPOS('M', 4)
+#define PIN_UART0_TX			PINPOS('M', 5)
+#define PIN_JTAG_CPU_TRST		PINPOS('M', 6)
+#define PIN_PWR_ON			PINPOS('M', 11)
+#define PIN_PWR_GPIO2			PINPOS('M', 12)
+#define PIN_PWR_GPIO0			PINPOS('M', 13)
+#define PIN_CLK25M			PINPOS('M', 14)
+#define PIN_SD0_PWR_EN			PINPOS('N', 1)
+#define PIN_SPK_EN			PINPOS('N', 3)
+#define PIN_JTAG_CPU_TCK		PINPOS('N', 4)
+#define PIN_JTAG_CPU_TMS		PINPOS('N', 6)
+#define PIN_PWR_WAKEUP1			PINPOS('N', 11)
+#define PIN_PWR_WAKEUP0			PINPOS('N', 12)
+#define PIN_PWR_GPIO1			PINPOS('N', 13)
+#define PIN_EMMC_DAT3			PINPOS('P', 1)
+#define PIN_EMMC_DAT0			PINPOS('P', 2)
+#define PIN_EMMC_DAT2			PINPOS('P', 3)
+#define PIN_EMMC_RSTN			PINPOS('P', 4)
+#define PIN_AUX0			PINPOS('P', 5)
+#define PIN_IIC0_SDA			PINPOS('P', 6)
+#define PIN_PWR_SEQ3			PINPOS('P', 10)
+#define PIN_PWR_VBAT_DET		PINPOS('P', 11)
+#define PIN_PWR_SEQ1			PINPOS('P', 12)
+#define PIN_PWR_BUTTON1			PINPOS('P', 13)
+#define PIN_EMMC_DAT1			PINPOS('R', 2)
+#define PIN_EMMC_CMD			PINPOS('R', 3)
+#define PIN_EMMC_CLK			PINPOS('R', 4)
+#define PIN_IIC0_SCL			PINPOS('R', 6)
+#define PIN_GPIO_ZQ			PINPOS('R', 10)
+#define PIN_PWR_RSTN			PINPOS('R', 11)
+#define PIN_PWR_SEQ2			PINPOS('R', 12)
+#define PIN_XTAL_XIN			PINPOS('R', 13)
+
+#endif /* _DT_BINDINGS_PINCTRL_SG2000_H */
diff --git a/include/dt-bindings/pinctrl/pinctrl-sg2002.h b/include/dt-bindings/pinctrl/pinctrl-sg2002.h
new file mode 100644
index 000000000000..3c36cfa0a550
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-sg2002.h
@@ -0,0 +1,79 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_SG2002_H
+#define _DT_BINDINGS_PINCTRL_SG2002_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PIN_AUD_AINL_MIC		2
+#define PIN_AUD_AOUTR			4
+#define PIN_SD0_CLK			6
+#define PIN_SD0_CMD			7
+#define PIN_SD0_D0			8
+#define PIN_SD0_D1			10
+#define PIN_SD0_D2			11
+#define PIN_SD0_D3			12
+#define PIN_SD0_CD			14
+#define PIN_SD0_PWR_EN			15
+#define PIN_SPK_EN			17
+#define PIN_UART0_TX			18
+#define PIN_UART0_RX			19
+#define PIN_EMMC_DAT2			20
+#define PIN_EMMC_CLK			21
+#define PIN_EMMC_DAT0			22
+#define PIN_EMMC_DAT3			23
+#define PIN_EMMC_CMD			24
+#define PIN_EMMC_DAT1			25
+#define PIN_JTAG_CPU_TMS		26
+#define PIN_JTAG_CPU_TCK		27
+#define PIN_IIC0_SCL			28
+#define PIN_IIC0_SDA			29
+#define PIN_AUX0			30
+#define PIN_GPIO_ZQ			35
+#define PIN_PWR_VBAT_DET		38
+#define PIN_PWR_RSTN			39
+#define PIN_PWR_SEQ1			40
+#define PIN_PWR_SEQ2			41
+#define PIN_PWR_WAKEUP0			43
+#define PIN_PWR_BUTTON1			44
+#define PIN_XTAL_XIN			45
+#define PIN_PWR_GPIO0			47
+#define PIN_PWR_GPIO1			48
+#define PIN_PWR_GPIO2			49
+#define PIN_SD1_D3			51
+#define PIN_SD1_D2			52
+#define PIN_SD1_D1			53
+#define PIN_SD1_D0			54
+#define PIN_SD1_CMD			55
+#define PIN_SD1_CLK			56
+#define PIN_PWM0_BUCK			58
+#define PIN_ADC1			59
+#define PIN_USB_VBUS_DET		60
+#define PIN_ETH_TXP			62
+#define PIN_ETH_TXM			63
+#define PIN_ETH_RXP			64
+#define PIN_ETH_RXM			65
+#define PIN_GPIO_RTX			67
+#define PIN_MIPIRX4N			72
+#define PIN_MIPIRX4P			73
+#define PIN_MIPIRX3N			74
+#define PIN_MIPIRX3P			75
+#define PIN_MIPIRX2N			76
+#define PIN_MIPIRX2P			77
+#define PIN_MIPIRX1N			78
+#define PIN_MIPIRX1P			79
+#define PIN_MIPIRX0N			80
+#define PIN_MIPIRX0P			81
+#define PIN_MIPI_TXM2			83
+#define PIN_MIPI_TXP2			84
+#define PIN_MIPI_TXM1			85
+#define PIN_MIPI_TXP1			86
+#define PIN_MIPI_TXM0			87
+#define PIN_MIPI_TXP0			88
+
+#endif /* _DT_BINDINGS_PINCTRL_SG2002_H */