Message ID | 20240704062623.1480062-3-shanchun1218@gmail.com |
---|---|
State | Superseded |
Headers | show |
Series | Add support for Nuvoton MA35D1 SDHCI | expand |
On 04/07/2024 08:26, Shan-Chun Hung wrote: > Add the SDHCI driver for the MA35D1 platform. It is based upon the > SDHCI interface, but requires some extra initialization. > > Signed-off-by: Shan-Chun Hung <shanchun1218@gmail.com> > --- > drivers/mmc/host/Kconfig | 12 ++ > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/sdhci-of-ma35d1.c | 297 +++++++++++++++++++++++++++++ > 3 files changed, 310 insertions(+) > create mode 100644 drivers/mmc/host/sdhci-of-ma35d1.c > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index bb0d4fb0892a..aa6922ff4210 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -252,6 +252,18 @@ config MMC_SDHCI_OF_SPARX5 > > If unsure, say N. > > +config MMC_SDHCI_OF_MA35D1 > + tristate "SDHCI OF support for the MA35D1 SDHCI controller" > + depends on ARCH_MA35 || COMPILE_TEST > + depends on MMC_SDHCI_PLTFM > + help > + This selects the MA35D1 Secure Digital Host Controller Interface. > + The controller supports SD/MMC/SDIO devices. > + > + If you have a controller with this interface, say Y or M here. > + > + If unsure, say N. > + > config MMC_SDHCI_CADENCE > tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller" > depends on MMC_SDHCI_PLTFM > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile > index f53f86d200ac..3ccffebbe59b 100644 > --- a/drivers/mmc/host/Makefile > +++ b/drivers/mmc/host/Makefile > @@ -88,6 +88,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o > obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o > obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC) += sdhci-of-dwcmshc.o > obj-$(CONFIG_MMC_SDHCI_OF_SPARX5) += sdhci-of-sparx5.o > +obj-$(CONFIG_MMC_SDHCI_OF_MA35D1) += sdhci-of-ma35d1.o > obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o > obj-$(CONFIG_MMC_SDHCI_IPROC) += sdhci-iproc.o > obj-$(CONFIG_MMC_SDHCI_NPCM) += sdhci-npcm.o > diff --git a/drivers/mmc/host/sdhci-of-ma35d1.c b/drivers/mmc/host/sdhci-of-ma35d1.c > new file mode 100644 > index 000000000000..b5aab65b9093 > --- /dev/null > +++ b/drivers/mmc/host/sdhci-of-ma35d1.c > @@ -0,0 +1,297 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2024 Nuvoton Technology Corp. > + * > + * Author: Shan-Chun Hung <shanchun1218@gmail.com> > + */ > + > +#include <linux/align.h> > +#include <linux/array_size.h> > +#include <linux/bits.h> > +#include <linux/build_bug.h> > +#include <linux/clk.h> > +#include <linux/delay.h> > +#include <linux/dev_printk.h> > +#include <linux/device.h> > +#include <linux/dma-mapping.h> > +#include <linux/err.h> > +#include <linux/math.h> > +#include <linux/mfd/syscon.h> > +#include <linux/minmax.h> > +#include <linux/mmc/card.h> > +#include <linux/mmc/host.h> > +#include <linux/mod_devicetable.h> > +#include <linux/module.h> > +#include <linux/pinctrl/consumer.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > +#include <linux/reset.h> > +#include <linux/sizes.h> > +#include <linux/types.h> > + > +#include "sdhci-pltfm.h" > +#include "sdhci.h" > + > +#define MA35_SYS_MISCFCR0 0x070 > +#define MA35_SDHCI_MSHCCTL 0x508 > +#define MA35_SDHCI_MBIUCTL 0x510 > + > +#define MA35_SDHCI_CMD_CONFLICT_CHK BIT(0) > +#define MA35_SDHCI_INCR_MSK GENMASK(3, 0) > +#define MA35_SDHCI_INCR16 BIT(3) > +#define MA35_SDHCI_INCR8 BIT(2) > + > +struct ma35_priv { > + struct regmap *regmap; Drop, you don't use it. > + struct reset_control *rst; > + struct pinctrl *pinctrl; > + struct pinctrl_state *pins_uhs; > + struct pinctrl_state *pins_default; > +}; > + > +struct ma35_restore_data { > + u32 reg; > + u32 width; > +}; > + ... > + > +static int ma35_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct sdhci_pltfm_host *pltfm_host; > + struct sdhci_host *host; > + struct ma35_priv *priv; > + int err; > + u32 extra, ctl; > + > + host = sdhci_pltfm_init(pdev, &sdhci_ma35_pdata, sizeof(struct ma35_priv)); > + if (IS_ERR(host)) > + return PTR_ERR(host); > + > + /* Extra adma table cnt for cross 128M boundary handling. */ > + extra = DIV_ROUND_UP_ULL(dma_get_required_mask(dev), SZ_128M); > + extra = min(extra, SDHCI_MAX_SEGS); > + > + host->adma_table_cnt += extra; > + pltfm_host = sdhci_priv(host); > + priv = sdhci_pltfm_priv(pltfm_host); > + > + pltfm_host->clk = devm_clk_get_optional_enabled(dev, NULL); > + if (IS_ERR(pltfm_host->clk)) { > + err = PTR_ERR(pltfm_host->clk); > + dev_err_probe(dev, err, "failed to get clk\n"); Syntax is err = dev_err_probe() > + goto err_sdhci; > + } > + > + err = mmc_of_parse(host->mmc); > + if (err) > + goto err_sdhci; > + > + priv->rst = devm_reset_control_get_exclusive(dev, NULL); > + if (IS_ERR(priv->rst)) { > + err = PTR_ERR(priv->rst); > + dev_err_probe(dev, err, "failed to get reset control\n"); err = dev_err_probe ... so all your previous versions were leaking memory. Double check your error paths. > + goto err_sdhci; > + } > + > + sdhci_get_of_property(pdev); > + Best regards, Krzysztof
Dear Krzysztof, Thank you for your review. On 2024/7/8 下午 10:25, Krzysztof Kozlowski wrote: > On 04/07/2024 08:26, Shan-Chun Hung wrote: >> Add the SDHCI driver for the MA35D1 platform. It is based upon the >> SDHCI interface, but requires some extra initialization. >> >> Signed-off-by: Shan-Chun Hung <shanchun1218@gmail.com> >> --- >> drivers/mmc/host/Kconfig | 12 ++ >> drivers/mmc/host/Makefile | 1 + >> drivers/mmc/host/sdhci-of-ma35d1.c | 297 +++++++++++++++++++++++++++++ >> 3 files changed, 310 insertions(+) >> create mode 100644 drivers/mmc/host/sdhci-of-ma35d1.c >> >> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig >> index bb0d4fb0892a..aa6922ff4210 100644 >> --- a/drivers/mmc/host/Kconfig >> +++ b/drivers/mmc/host/Kconfig >> @@ -252,6 +252,18 @@ config MMC_SDHCI_OF_SPARX5 >> >> If unsure, say N. >> >> +config MMC_SDHCI_OF_MA35D1 >> + tristate "SDHCI OF support for the MA35D1 SDHCI controller" >> + depends on ARCH_MA35 || COMPILE_TEST >> + depends on MMC_SDHCI_PLTFM >> + help >> + This selects the MA35D1 Secure Digital Host Controller Interface. >> + The controller supports SD/MMC/SDIO devices. >> + >> + If you have a controller with this interface, say Y or M here. >> + >> + If unsure, say N. >> + >> config MMC_SDHCI_CADENCE >> tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller" >> depends on MMC_SDHCI_PLTFM >> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile >> index f53f86d200ac..3ccffebbe59b 100644 >> --- a/drivers/mmc/host/Makefile >> +++ b/drivers/mmc/host/Makefile >> @@ -88,6 +88,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o >> obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o >> obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC) += sdhci-of-dwcmshc.o >> obj-$(CONFIG_MMC_SDHCI_OF_SPARX5) += sdhci-of-sparx5.o >> +obj-$(CONFIG_MMC_SDHCI_OF_MA35D1) += sdhci-of-ma35d1.o >> obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o >> obj-$(CONFIG_MMC_SDHCI_IPROC) += sdhci-iproc.o >> obj-$(CONFIG_MMC_SDHCI_NPCM) += sdhci-npcm.o >> diff --git a/drivers/mmc/host/sdhci-of-ma35d1.c b/drivers/mmc/host/sdhci-of-ma35d1.c >> new file mode 100644 >> index 000000000000..b5aab65b9093 >> --- /dev/null >> +++ b/drivers/mmc/host/sdhci-of-ma35d1.c >> @@ -0,0 +1,297 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Copyright (C) 2024 Nuvoton Technology Corp. >> + * >> + * Author: Shan-Chun Hung <shanchun1218@gmail.com> >> + */ >> + >> +#include <linux/align.h> >> +#include <linux/array_size.h> >> +#include <linux/bits.h> >> +#include <linux/build_bug.h> >> +#include <linux/clk.h> >> +#include <linux/delay.h> >> +#include <linux/dev_printk.h> >> +#include <linux/device.h> >> +#include <linux/dma-mapping.h> >> +#include <linux/err.h> >> +#include <linux/math.h> >> +#include <linux/mfd/syscon.h> >> +#include <linux/minmax.h> >> +#include <linux/mmc/card.h> >> +#include <linux/mmc/host.h> >> +#include <linux/mod_devicetable.h> >> +#include <linux/module.h> >> +#include <linux/pinctrl/consumer.h> >> +#include <linux/platform_device.h> >> +#include <linux/regmap.h> >> +#include <linux/reset.h> >> +#include <linux/sizes.h> >> +#include <linux/types.h> >> + >> +#include "sdhci-pltfm.h" >> +#include "sdhci.h" >> + >> +#define MA35_SYS_MISCFCR0 0x070 >> +#define MA35_SDHCI_MSHCCTL 0x508 >> +#define MA35_SDHCI_MBIUCTL 0x510 >> + >> +#define MA35_SDHCI_CMD_CONFLICT_CHK BIT(0) >> +#define MA35_SDHCI_INCR_MSK GENMASK(3, 0) >> +#define MA35_SDHCI_INCR16 BIT(3) >> +#define MA35_SDHCI_INCR8 BIT(2) >> + >> +struct ma35_priv { >> + struct regmap *regmap; > Drop, you don't use it. I will remove it and use local variables instead. > >> + struct reset_control *rst; >> + struct pinctrl *pinctrl; >> + struct pinctrl_state *pins_uhs; >> + struct pinctrl_state *pins_default; >> +}; >> + >> +struct ma35_restore_data { >> + u32 reg; >> + u32 width; >> +}; >> + > ... > >> + >> +static int ma35_probe(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct sdhci_pltfm_host *pltfm_host; >> + struct sdhci_host *host; >> + struct ma35_priv *priv; >> + int err; >> + u32 extra, ctl; >> + >> + host = sdhci_pltfm_init(pdev, &sdhci_ma35_pdata, sizeof(struct ma35_priv)); >> + if (IS_ERR(host)) >> + return PTR_ERR(host); >> + >> + /* Extra adma table cnt for cross 128M boundary handling. */ >> + extra = DIV_ROUND_UP_ULL(dma_get_required_mask(dev), SZ_128M); >> + extra = min(extra, SDHCI_MAX_SEGS); >> + >> + host->adma_table_cnt += extra; >> + pltfm_host = sdhci_priv(host); >> + priv = sdhci_pltfm_priv(pltfm_host); >> + >> + pltfm_host->clk = devm_clk_get_optional_enabled(dev, NULL); >> + if (IS_ERR(pltfm_host->clk)) { >> + err = PTR_ERR(pltfm_host->clk); >> + dev_err_probe(dev, err, "failed to get clk\n"); > Syntax is err = dev_err_probe() I will fix it. >> + goto err_sdhci; >> + } >> + >> + err = mmc_of_parse(host->mmc); >> + if (err) >> + goto err_sdhci; >> + >> + priv->rst = devm_reset_control_get_exclusive(dev, NULL); >> + if (IS_ERR(priv->rst)) { >> + err = PTR_ERR(priv->rst); >> + dev_err_probe(dev, err, "failed to get reset control\n"); > err = dev_err_probe > > ... so all your previous versions were leaking memory. Double check your > error paths. I will fix it and make sure to double check the error paths. >> + goto err_sdhci; >> + } >> + >> + sdhci_get_of_property(pdev); >> + > Best regards, > Krzysztof Best Regards, Shan-Chun
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index bb0d4fb0892a..aa6922ff4210 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -252,6 +252,18 @@ config MMC_SDHCI_OF_SPARX5 If unsure, say N. +config MMC_SDHCI_OF_MA35D1 + tristate "SDHCI OF support for the MA35D1 SDHCI controller" + depends on ARCH_MA35 || COMPILE_TEST + depends on MMC_SDHCI_PLTFM + help + This selects the MA35D1 Secure Digital Host Controller Interface. + The controller supports SD/MMC/SDIO devices. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + config MMC_SDHCI_CADENCE tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller" depends on MMC_SDHCI_PLTFM diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index f53f86d200ac..3ccffebbe59b 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC) += sdhci-of-dwcmshc.o obj-$(CONFIG_MMC_SDHCI_OF_SPARX5) += sdhci-of-sparx5.o +obj-$(CONFIG_MMC_SDHCI_OF_MA35D1) += sdhci-of-ma35d1.o obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o obj-$(CONFIG_MMC_SDHCI_IPROC) += sdhci-iproc.o obj-$(CONFIG_MMC_SDHCI_NPCM) += sdhci-npcm.o diff --git a/drivers/mmc/host/sdhci-of-ma35d1.c b/drivers/mmc/host/sdhci-of-ma35d1.c new file mode 100644 index 000000000000..b5aab65b9093 --- /dev/null +++ b/drivers/mmc/host/sdhci-of-ma35d1.c @@ -0,0 +1,297 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Nuvoton Technology Corp. + * + * Author: Shan-Chun Hung <shanchun1218@gmail.com> + */ + +#include <linux/align.h> +#include <linux/array_size.h> +#include <linux/bits.h> +#include <linux/build_bug.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dev_printk.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/math.h> +#include <linux/mfd/syscon.h> +#include <linux/minmax.h> +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/sizes.h> +#include <linux/types.h> + +#include "sdhci-pltfm.h" +#include "sdhci.h" + +#define MA35_SYS_MISCFCR0 0x070 +#define MA35_SDHCI_MSHCCTL 0x508 +#define MA35_SDHCI_MBIUCTL 0x510 + +#define MA35_SDHCI_CMD_CONFLICT_CHK BIT(0) +#define MA35_SDHCI_INCR_MSK GENMASK(3, 0) +#define MA35_SDHCI_INCR16 BIT(3) +#define MA35_SDHCI_INCR8 BIT(2) + +struct ma35_priv { + struct regmap *regmap; + struct reset_control *rst; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_uhs; + struct pinctrl_state *pins_default; +}; + +struct ma35_restore_data { + u32 reg; + u32 width; +}; + +static const struct ma35_restore_data restore_data[] = { + { SDHCI_CLOCK_CONTROL, sizeof(u32)}, + { SDHCI_BLOCK_SIZE, sizeof(u32)}, + { SDHCI_INT_ENABLE, sizeof(u32)}, + { SDHCI_SIGNAL_ENABLE, sizeof(u32)}, + { SDHCI_AUTO_CMD_STATUS, sizeof(u32)}, + { SDHCI_HOST_CONTROL, sizeof(u32)}, + { SDHCI_TIMEOUT_CONTROL, sizeof(u8) }, + { MA35_SDHCI_MSHCCTL, sizeof(u16)}, + { MA35_SDHCI_MBIUCTL, sizeof(u16)}, +}; + +/* + * If DMA addr spans 128MB boundary, we split the DMA transfer into two + * so that each DMA transfer doesn't exceed the boundary. + */ +static void ma35_adma_write_desc(struct sdhci_host *host, void **desc, dma_addr_t addr, int len, + unsigned int cmd) +{ + int tmplen, offset; + + if (likely(!len || (ALIGN(addr, SZ_128M) == ALIGN(addr + len - 1, SZ_128M)))) { + sdhci_adma_write_desc(host, desc, addr, len, cmd); + return; + } + + offset = addr & (SZ_128M - 1); + tmplen = SZ_128M - offset; + sdhci_adma_write_desc(host, desc, addr, tmplen, cmd); + + addr += tmplen; + len -= tmplen; + sdhci_adma_write_desc(host, desc, addr, len, cmd); +} + +static void ma35_set_clock(struct sdhci_host *host, unsigned int clock) +{ + u32 ctl; + + /* + * If the clock frequency exceeds MMC_HIGH_52_MAX_DTR, + * disable command conflict check. + */ + ctl = sdhci_readw(host, MA35_SDHCI_MSHCCTL); + if (clock > MMC_HIGH_52_MAX_DTR) + ctl &= ~MA35_SDHCI_CMD_CONFLICT_CHK; + else + ctl |= MA35_SDHCI_CMD_CONFLICT_CHK; + sdhci_writew(host, ctl, MA35_SDHCI_MSHCCTL); + + sdhci_set_clock(host, clock); +} + +static int ma35_start_signal_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct ma35_priv *priv = sdhci_pltfm_priv(pltfm_host); + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_180: + if (!IS_ERR(priv->pinctrl) && !IS_ERR(priv->pins_uhs)) + pinctrl_select_state(priv->pinctrl, priv->pins_uhs); + break; + case MMC_SIGNAL_VOLTAGE_330: + if (!IS_ERR(priv->pinctrl) && !IS_ERR(priv->pins_default)) + pinctrl_select_state(priv->pinctrl, priv->pins_default); + break; + default: + dev_err(mmc_dev(host->mmc), "Unsupported signal voltage!\n"); + return -EINVAL; + } + + return sdhci_start_signal_voltage_switch(mmc, ios); +} + +static void ma35_voltage_switch(struct sdhci_host *host) +{ + /* Wait for 5ms after set 1.8V signal enable bit */ + fsleep(5000); +} + +static int ma35_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct ma35_priv *priv = sdhci_pltfm_priv(pltfm_host); + int idx; + u32 regs[ARRAY_SIZE(restore_data)] = {}; + + /* + * Limitations require a reset of SD/eMMC before tuning and + * saving the registers before resetting, then restoring + * after the reset. + */ + for (idx = 0; idx < ARRAY_SIZE(restore_data); idx++) { + if (restore_data[idx].width == sizeof(u32)) + regs[idx] = sdhci_readl(host, restore_data[idx].reg); + else if (restore_data[idx].width == sizeof(u16)) + regs[idx] = sdhci_readw(host, restore_data[idx].reg); + else if (restore_data[idx].width == sizeof(u8)) + regs[idx] = sdhci_readb(host, restore_data[idx].reg); + } + + reset_control_assert(priv->rst); + reset_control_deassert(priv->rst); + + for (idx = 0; idx < ARRAY_SIZE(restore_data); idx++) { + if (restore_data[idx].width == sizeof(u32)) + sdhci_writel(host, regs[idx], restore_data[idx].reg); + else if (restore_data[idx].width == sizeof(u16)) + sdhci_writew(host, regs[idx], restore_data[idx].reg); + else if (restore_data[idx].width == sizeof(u8)) + sdhci_writeb(host, regs[idx], restore_data[idx].reg); + } + + return sdhci_execute_tuning(mmc, opcode); +} + +static const struct sdhci_ops sdhci_ma35_ops = { + .set_clock = ma35_set_clock, + .set_bus_width = sdhci_set_bus_width, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .reset = sdhci_reset, + .adma_write_desc = ma35_adma_write_desc, + .voltage_switch = ma35_voltage_switch, +}; + +static const struct sdhci_pltfm_data sdhci_ma35_pdata = { + .ops = &sdhci_ma35_ops, + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | SDHCI_QUIRK2_BROKEN_DDR50 | + SDHCI_QUIRK2_ACMD23_BROKEN, +}; + +static int ma35_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_host *host; + struct ma35_priv *priv; + int err; + u32 extra, ctl; + + host = sdhci_pltfm_init(pdev, &sdhci_ma35_pdata, sizeof(struct ma35_priv)); + if (IS_ERR(host)) + return PTR_ERR(host); + + /* Extra adma table cnt for cross 128M boundary handling. */ + extra = DIV_ROUND_UP_ULL(dma_get_required_mask(dev), SZ_128M); + extra = min(extra, SDHCI_MAX_SEGS); + + host->adma_table_cnt += extra; + pltfm_host = sdhci_priv(host); + priv = sdhci_pltfm_priv(pltfm_host); + + pltfm_host->clk = devm_clk_get_optional_enabled(dev, NULL); + if (IS_ERR(pltfm_host->clk)) { + err = PTR_ERR(pltfm_host->clk); + dev_err_probe(dev, err, "failed to get clk\n"); + goto err_sdhci; + } + + err = mmc_of_parse(host->mmc); + if (err) + goto err_sdhci; + + priv->rst = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(priv->rst)) { + err = PTR_ERR(priv->rst); + dev_err_probe(dev, err, "failed to get reset control\n"); + goto err_sdhci; + } + + sdhci_get_of_property(pdev); + + priv->pinctrl = devm_pinctrl_get(dev); + if (!IS_ERR(priv->pinctrl)) { + priv->pins_default = pinctrl_lookup_state(priv->pinctrl, "default"); + priv->pins_uhs = pinctrl_lookup_state(priv->pinctrl, "state_uhs"); + pinctrl_select_state(priv->pinctrl, priv->pins_default); + } + + if (!(host->quirks2 & SDHCI_QUIRK2_NO_1_8_V)) { + u32 reg; + + priv->regmap = syscon_regmap_lookup_by_phandle(dev_of_node(dev), "nuvoton,sys"); + + if (!IS_ERR(priv->regmap)) { + /* Enable SDHCI voltage stable for 1.8V */ + regmap_read(priv->regmap, MA35_SYS_MISCFCR0, ®); + reg |= BIT(17); + regmap_write(priv->regmap, MA35_SYS_MISCFCR0, reg); + } + + host->mmc_host_ops.start_signal_voltage_switch = + ma35_start_signal_voltage_switch; + } + + host->mmc_host_ops.execute_tuning = ma35_execute_tuning; + + err = sdhci_add_host(host); + if (err) + goto err_sdhci; + + /* + * Split data into chunks of 16 or 8 bytes for transmission. + * Each chunk transfer is guaranteed to be uninterrupted on the bus. + * This likely corresponds to the AHB bus DMA burst size. + */ + ctl = sdhci_readw(host, MA35_SDHCI_MBIUCTL); + ctl &= ~MA35_SDHCI_INCR_MSK; + ctl |= MA35_SDHCI_INCR16 | MA35_SDHCI_INCR8; + sdhci_writew(host, ctl, MA35_SDHCI_MBIUCTL); + + return 0; + +err_sdhci: + sdhci_pltfm_free(pdev); + return err; +} + +static const struct of_device_id sdhci_ma35_dt_ids[] = { + { .compatible = "nuvoton,ma35d1-sdhci" }, + {} +}; + +static struct platform_driver sdhci_ma35_driver = { + .driver = { + .name = "sdhci-ma35", + .of_match_table = sdhci_ma35_dt_ids, + }, + .probe = ma35_probe, + .remove_new = sdhci_pltfm_remove, +}; +module_platform_driver(sdhci_ma35_driver); + +MODULE_DESCRIPTION("SDHCI platform driver for Nuvoton MA35"); +MODULE_AUTHOR("Shan-Chun Hung <shanchun1218@gmail.com>"); +MODULE_LICENSE("GPL");
Add the SDHCI driver for the MA35D1 platform. It is based upon the SDHCI interface, but requires some extra initialization. Signed-off-by: Shan-Chun Hung <shanchun1218@gmail.com> --- drivers/mmc/host/Kconfig | 12 ++ drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-of-ma35d1.c | 297 +++++++++++++++++++++++++++++ 3 files changed, 310 insertions(+) create mode 100644 drivers/mmc/host/sdhci-of-ma35d1.c -- 2.25.1