| Message ID | 20240710-phy-field-prep-v1-1-2fa3f7dc4fc7@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | phy: exynos5-usbdrd: convert some FIELD_PREP_CONST() to FIELD_PREP() | expand |
Hi, On Wed, 2024-07-10 at 07:45 +0100, André Draszik wrote: > Use of FIELD_PREP_CONST() was a thinko - it's meant to be used for > (constant) initialisers, not constant values. > > Use FIELD_PREP() where possible. It has better error checking and is > therefore the preferred macro to use in those cases. > > Signed-off-by: André Draszik <andre.draszik@linaro.org> > --- > drivers/phy/samsung/phy-exynos5-usbdrd.c | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) Any comments on this patch? Cheers, Andre'
On Fri, Jul 26, 2024 at 1:02 AM André Draszik <andre.draszik@linaro.org> wrote: > > Hi, > > On Wed, 2024-07-10 at 07:45 +0100, André Draszik wrote: > > Use of FIELD_PREP_CONST() was a thinko - it's meant to be used for > > (constant) initialisers, not constant values. > > > > Use FIELD_PREP() where possible. It has better error checking and is > > therefore the preferred macro to use in those cases. > > > > Signed-off-by: André Draszik <andre.draszik@linaro.org> > > --- > > drivers/phy/samsung/phy-exynos5-usbdrd.c | 12 ++++++------ > > 1 file changed, 6 insertions(+), 6 deletions(-) > > Any comments on this patch? > Looks good to me: Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> > Cheers, > Andre' > >
On Wed, 10 Jul 2024 07:45:07 +0100, André Draszik wrote: > Use of FIELD_PREP_CONST() was a thinko - it's meant to be used for > (constant) initialisers, not constant values. > > Use FIELD_PREP() where possible. It has better error checking and is > therefore the preferred macro to use in those cases. > > > [...] Applied, thanks! [1/1] phy: exynos5-usbdrd: convert some FIELD_PREP_CONST() to FIELD_PREP() commit: 7e6c2ffe6c2284a10f77079670e3b26b43df4443 Best regards,
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c index df52b78a120b..0cc5c4249447 100644 --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -607,7 +607,7 @@ exynos5_usbdrd_usbdp_g2_v4_ctrl_pma_ready(struct exynos5_usbdrd_phy *phy_drd) reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL); reg &= ~SECPMACTL_PMA_REF_FREQ_SEL; - reg |= FIELD_PREP_CONST(SECPMACTL_PMA_REF_FREQ_SEL, 1); + reg |= FIELD_PREP(SECPMACTL_PMA_REF_FREQ_SEL, 1); /* SFR reset */ reg |= (SECPMACTL_PMA_LOW_PWR | SECPMACTL_PMA_APB_SW_RST); reg &= ~(SECPMACTL_PMA_ROPLL_REF_CLK_SEL | @@ -1123,19 +1123,19 @@ static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) reg &= ~SSPPLLCTL_FSEL; switch (phy_drd->extrefclk) { case EXYNOS5_FSEL_50MHZ: - reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 7); + reg |= FIELD_PREP(SSPPLLCTL_FSEL, 7); break; case EXYNOS5_FSEL_26MHZ: - reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 6); + reg |= FIELD_PREP(SSPPLLCTL_FSEL, 6); break; case EXYNOS5_FSEL_24MHZ: - reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 2); + reg |= FIELD_PREP(SSPPLLCTL_FSEL, 2); break; case EXYNOS5_FSEL_20MHZ: - reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 1); + reg |= FIELD_PREP(SSPPLLCTL_FSEL, 1); break; case EXYNOS5_FSEL_19MHZ2: - reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 0); + reg |= FIELD_PREP(SSPPLLCTL_FSEL, 0); break; default: dev_warn(phy_drd->dev, "unsupported ref clk: %#.2x\n",
Use of FIELD_PREP_CONST() was a thinko - it's meant to be used for (constant) initialisers, not constant values. Use FIELD_PREP() where possible. It has better error checking and is therefore the preferred macro to use in those cases. Signed-off-by: André Draszik <andre.draszik@linaro.org> --- drivers/phy/samsung/phy-exynos5-usbdrd.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) --- base-commit: 82d01fe6ee52086035b201cfa1410a3b04384257 change-id: 20240710-phy-field-prep-be6982d38215 Best regards,