diff mbox series

[v2] usb: dwc3: support USB 3.1 controllers

Message ID 20240423141551.2410199-1-caleb.connolly@linaro.org
State Accepted
Commit ef1e322f3e1d9a221a1ee6109f6571429ee9fb4a
Headers show
Series [v2] usb: dwc3: support USB 3.1 controllers | expand

Commit Message

Caleb Connolly April 23, 2024, 2:15 p.m. UTC
The revision is different for these, add the additional check as in
xhci-dwc3 core_init code.

Equivalent upstream Linux patch:
690fb3718a70 ("usb: dwc3: Support Synopsys USB 3.1 IP")

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---
Changes since v1:
* Reference Linux patch
* V1: https://lore.kernel.org/u-boot/20240411160527.835767-1-caleb.connolly@linaro.org
---
 drivers/usb/dwc3/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Caleb Connolly Aug. 9, 2024, 12:10 a.m. UTC | #1
Small ping, I think this patch slipped through the cracks.

On 23/04/2024 16:15, Caleb Connolly wrote:
> The revision is different for these, add the additional check as in
> xhci-dwc3 core_init code.
> 
> Equivalent upstream Linux patch:
> 690fb3718a70 ("usb: dwc3: Support Synopsys USB 3.1 IP")
> 
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550
> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> Reviewed-by: Marek Vasut <marex@denx.de>
> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
> ---
> Changes since v1:
> * Reference Linux patch
> * V1: https://lore.kernel.org/u-boot/20240411160527.835767-1-caleb.connolly@linaro.org
> ---
>   drivers/usb/dwc3/core.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 96e850b7170f..db045f5822d4 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -594,9 +594,10 @@ static int dwc3_core_init(struct dwc3 *dwc)
>   	int			ret;
>   
>   	reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
>   	/* This should read as U3 followed by revision number */
> -	if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
> +	if ((reg & DWC3_GSNPSID_MASK) != 0x55330000 &&
> +	    (reg & DWC3_GSNPSID_MASK) != 0x33310000) {
>   		dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
>   		ret = -ENODEV;
>   		goto err0;
>   	}
Marek Vasut Aug. 11, 2024, 5:37 p.m. UTC | #2
On 4/23/24 4:15 PM, Caleb Connolly wrote:
> The revision is different for these, add the additional check as in
> xhci-dwc3 core_init code.

Reviewed-by: Marek Vasut <marex@denx.de>

Thanks !
Mattijs Korpershoek Aug. 13, 2024, 12:26 p.m. UTC | #3
On dim., août 11, 2024 at 19:37, Marek Vasut <marex@denx.de> wrote:

> On 4/23/24 4:15 PM, Caleb Connolly wrote:
>> The revision is different for these, add the additional check as in
>> xhci-dwc3 core_init code.
>
> Reviewed-by: Marek Vasut <marex@denx.de>
>
> Thanks !

Marek, should I pick this up through u-boot-dfu or will you pick it up?
Marek Vasut Aug. 13, 2024, 12:35 p.m. UTC | #4
On 8/13/24 2:26 PM, Mattijs Korpershoek wrote:
> On dim., août 11, 2024 at 19:37, Marek Vasut <marex@denx.de> wrote:
> 
>> On 4/23/24 4:15 PM, Caleb Connolly wrote:
>>> The revision is different for these, add the additional check as in
>>> xhci-dwc3 core_init code.
>>
>> Reviewed-by: Marek Vasut <marex@denx.de>
>>
>> Thanks !
> 
> Marek, should I pick this up through u-boot-dfu or will you pick it up?

I think this is already in u-boot/master , isn't it ?
Fabio Estevam Aug. 13, 2024, 12:43 p.m. UTC | #5
Hi Mattijs,

On Tue, Aug 13, 2024 at 9:26 AM Mattijs Korpershoek
<mkorpershoek@baylibre.com> wrote:

> Marek, should I pick this up through u-boot-dfu or will you pick it up?

This one is already in master:

https://gitlab.com/u-boot/u-boot/-/commit/ef1e322f3e1d9a221a1ee6109f6571429ee9fb4a
Mattijs Korpershoek Aug. 13, 2024, 1:03 p.m. UTC | #6
Hi,

On mar., août 13, 2024 at 09:43, Fabio Estevam <festevam@gmail.com> wrote:

> Hi Mattijs,
>
> On Tue, Aug 13, 2024 at 9:26 AM Mattijs Korpershoek
> <mkorpershoek@baylibre.com> wrote:
>
>> Marek, should I pick this up through u-boot-dfu or will you pick it up?
>
> This one is already in master:
>
> https://gitlab.com/u-boot/u-boot/-/commit/ef1e322f3e1d9a221a1ee6109f6571429ee9fb4a

I see. Since I did not see any "applied" message I assumed it was still
pending.

Sorry for the noise!
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 96e850b7170f..db045f5822d4 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -594,9 +594,10 @@  static int dwc3_core_init(struct dwc3 *dwc)
 	int			ret;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
 	/* This should read as U3 followed by revision number */
-	if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
+	if ((reg & DWC3_GSNPSID_MASK) != 0x55330000 &&
+	    (reg & DWC3_GSNPSID_MASK) != 0x33310000) {
 		dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
 		ret = -ENODEV;
 		goto err0;
 	}