diff mbox series

ARM: dts: Fix undocumented LM75 compatible nodes

Message ID 20240808164941.1407327-1-robh@kernel.org
State Superseded
Headers show
Series ARM: dts: Fix undocumented LM75 compatible nodes | expand

Commit Message

Rob Herring (Arm) Aug. 8, 2024, 4:49 p.m. UTC
"lm75" without any vendor is undocumented. It works with the Linux
kernel since the I2C subsystem will do matches of the compatible string
without a vendor prefix to the i2c_device_id and/or driver name.

Mostly replace "lm75" with "national,lm75" as that's the original part
vendor and the compatible which matches what "lm75" matched with. In a
couple of cases the node name or compatible gives a clue to the actual
part and vendor and a more specific compatible can be used. In these
cases, it does change the variant the kernel picks.

"nct75" is an OnSemi part which is compatible with TI TMP75C based on
a comparison of the OnSemi NCT75 datasheet and configuration the Linux
driver uses. Adding an OnSemi compatible would be an ABI change.

"nxp,lm75" is most likely an NXP part. NXP makes a LM75A and LM75B.
Both are 11-bit resolution and 100ms sample time, so "national,lm75b" is
the closest match.

While we're here, fix the node names to use the generic name
"temperature-sensor".

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
SoC maintainers, Please take this directly.
---
 .../aspeed/aspeed-bmc-facebook-greatlakes.dts |  2 +-
 .../socfpga/socfpga_cyclone5_vining_fpga.dts  |  4 +--
 .../dts/marvell/armada-385-clearfog-gtr.dtsi  |  8 ++---
 .../boot/dts/nuvoton/nuvoton-npcm730-kudo.dts | 32 +++++++++----------
 .../boot/dts/nuvoton/nuvoton-npcm750-evb.dts  |  6 ++--
 arch/arm/boot/dts/nxp/imx/imx53-mba53.dts     |  4 +--
 arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi   |  4 +--
 .../dts/nxp/lpc/lpc4357-ea4357-devkit.dts     |  4 +--
 .../boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts  |  2 +-
 arch/arm/boot/dts/ti/omap/am335x-nano.dts     |  2 +-
 .../boot/dts/xilinx/zynq-zturn-common.dtsi    |  4 +--
 11 files changed, 36 insertions(+), 36 deletions(-)

Comments

Krzysztof Kozlowski Aug. 8, 2024, 5:54 p.m. UTC | #1
On 08/08/2024 18:49, Rob Herring (Arm) wrote:
> "lm75" without any vendor is undocumented. It works with the Linux
> kernel since the I2C subsystem will do matches of the compatible string
> without a vendor prefix to the i2c_device_id and/or driver name.
> 
> Mostly replace "lm75" with "national,lm75" as that's the original part
> vendor and the compatible which matches what "lm75" matched with. In a
> couple of cases the node name or compatible gives a clue to the actual
> part and vendor and a more specific compatible can be used. In these
> cases, it does change the variant the kernel picks.
> 
> "nct75" is an OnSemi part which is compatible with TI TMP75C based on
> a comparison of the OnSemi NCT75 datasheet and configuration the Linux
> driver uses. Adding an OnSemi compatible would be an ABI change.
> 
> "nxp,lm75" is most likely an NXP part. NXP makes a LM75A and LM75B.
> Both are 11-bit resolution and 100ms sample time, so "national,lm75b" is
> the closest match.
> 
> While we're here, fix the node names to use the generic name
> "temperature-sensor".
> 
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
> ---
> SoC maintainers, Please take this directly.
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
index 998598c15fd0..49914a4a179f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
@@ -201,7 +201,7 @@  eeprom@54 {
 &i2c12 {
 	status = "okay";
 	temperature-sensor@4f {
-		compatible = "lm75";
+		compatible = "national,lm75";
 		reg = <0x4f>;
 	};
 };
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
index 65f390bf8975..84f39dec3c42 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
@@ -130,8 +130,8 @@  gpio: pca9557@1f {
 		#gpio-cells = <2>;
 	};
 
-	temp: lm75@48 {
-		compatible = "lm75";
+	temp: temperature-sensor@48 {
+		compatible = "national,lm75";
 		reg = <0x48>;
 	};
 
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
index f3a3cb6ac311..8208c6a9627a 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
@@ -423,14 +423,14 @@  &i2c0 {
 	status = "okay";
 
 	/* U26 temperature sensor placed near SoC */
-	temp1: nct75@4c {
-		compatible = "lm75";
+	temp1: temperature-sensor@4c {
+		compatible = "ti,tmp75c";
 		reg = <0x4c>;
 	};
 
 	/* U27 temperature sensor placed near RTC battery */
-	temp2: nct75@4d {
-		compatible = "lm75";
+	temp2: temperature-sensor@4d {
+		compatible = "ti,tmp75c";
 		reg = <0x4d>;
 	};
 
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
index 1f07ba382910..886a87dfcd0d 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
@@ -531,8 +531,8 @@  i2c@4 {
 			reg = <4>;
 
 			// INLET1_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
@@ -543,8 +543,8 @@  i2c@5 {
 			reg = <5>;
 
 			// OUTLET1_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
@@ -555,8 +555,8 @@  i2c@6 {
 			reg = <6>;
 
 			// OUTLET2_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
@@ -567,8 +567,8 @@  i2c@7 {
 			reg = <7>;
 
 			// OUTLET3_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
@@ -697,8 +697,8 @@  i2c@3 {
 			reg = <3>;
 
 			// M2_ZONE_T
-			lm75@28 {
-				compatible = "ti,lm75";
+			temperature-sensor@28 {
+				compatible = "national,lm75";
 				reg = <0x28>;
 			};
 		};
@@ -709,8 +709,8 @@  i2c@4 {
 			reg = <4>;
 
 			// BATT_ZONE_T
-			lm75@29 {
-				compatible = "ti,lm75";
+			temperature-sensor@29 {
+				compatible = "national,lm75";
 				reg = <0x29>;
 			};
 		};
@@ -721,8 +721,8 @@  i2c@5 {
 			reg = <5>;
 
 			// NBM1_ZONE_T
-			lm75@28 {
-				compatible = "ti,lm75";
+			temperature-sensor@28 {
+				compatible = "national,lm75";
 				reg = <0x28>;
 			};
 		};
@@ -732,8 +732,8 @@  i2c@6 {
 			reg = <6>;
 
 			// NBM2_ZONE_T
-			lm75@29 {
-				compatible = "ti,lm75";
+			temperature-sensor@29 {
+				compatible = "national,lm75";
 				reg = <0x29>;
 			};
 		};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
index f53d45fa1de8..bcdcb30c7bf6 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
@@ -198,7 +198,7 @@  &i2c0 {
 	clock-frequency = <100000>;
 	status = "okay";
 	lm75@48 {
-		compatible = "lm75";
+		compatible = "national,lm75";
 		reg = <0x48>;
 		status = "okay";
 	};
@@ -208,8 +208,8 @@  lm75@48 {
 &i2c1 {
 	clock-frequency = <100000>;
 	status = "okay";
-	lm75@48 {
-		compatible = "lm75";
+	temperature-sensor@48 {
+		compatible = "national,lm75";
 		reg = <0x48>;
 		status = "okay";
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
index 2117de872703..d155b3ec22ef 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
@@ -175,8 +175,8 @@  expander: pca9554@20 {
 		gpio-controller;
 	};
 
-	sensor2: lm75@49 {
-		compatible = "lm75";
+	sensor2: temperature-sensor@49 {
+		compatible = "national,lm75";
 		reg = <0x49>;
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
index b2d7271d1d24..d01c3aee0272 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
@@ -254,8 +254,8 @@  pmic: mc34708@8 {
 		interrupts = <6 4>; /* PATA_DATA6, active high */
 	};
 
-	sensor1: lm75@48 {
-		compatible = "lm75";
+	sensor1: temperature-sensor@48 {
+		compatible = "national,lm75";
 		reg = <0x48>;
 	};
 
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
index 224f80a4a31d..4aefbc01dfc0 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
@@ -482,8 +482,8 @@  mma7455@1d {
 		reg = <0x1d>;
 	};
 
-	lm75@48 {
-		compatible = "nxp,lm75";
+	temperature-sensor@48 {
+		compatible = "national,lm75b";
 		reg = <0x48>;
 	};
 
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
index 1f84654df50c..846afb8ccbf1 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
@@ -511,7 +511,7 @@  &i2c1 {
 	clock-frequency = <400000>;
 
 	sensor@49 {
-		compatible = "lm75";
+		compatible = "national,lm75";
 		reg = <0x49>;
 	};
 
diff --git a/arch/arm/boot/dts/ti/omap/am335x-nano.dts b/arch/arm/boot/dts/ti/omap/am335x-nano.dts
index 26b5510cb3d1..56929059f5af 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-nano.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-nano.dts
@@ -231,7 +231,7 @@  tps: tps@24 {
 	};
 
 	temperature-sensor@48 {
-		compatible = "lm75";
+		compatible = "national,lm75";
 		reg = <0x48>;
 	};
 
diff --git a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
index dfb1fbafe3aa..33b02e05ce82 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
+++ b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
@@ -97,9 +97,9 @@  &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	stlm75@49 {
+	temperature-sensor@49 {
 		status = "okay";
-		compatible = "lm75";
+		compatible = "st,stlm75";
 		reg = <0x49>;
 	};