Message ID | 20240816-cleanup-h-of-node-put-memory-v2-0-9eed0ee16b78@linaro.org |
---|---|
Headers | show |
Series | memory: simplify with scoped/cleanup.h for device nodes | expand |
On Fri, 16 Aug 2024 12:54:37 +0200 Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > Use scoped for_each_available_child_of_node_scoped() when iterating over > device nodes to make code a bit simpler. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On Fri, 16 Aug 2024 12:54:35 +0200 Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > Use dev_err_probe() to avoid dmesg flood on actual defer. This makes > the code also simpler. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Changes in v2: > 1. New patch > --- > drivers/memory/ti-aemif.c | 6 ++---- > 1 file changed, 2 insertions(+), 4 deletions(-) > > diff --git a/drivers/memory/ti-aemif.c b/drivers/memory/ti-aemif.c > index e192db9e0e4b..360f2705b1ff 100644 > --- a/drivers/memory/ti-aemif.c > +++ b/drivers/memory/ti-aemif.c > @@ -345,10 +345,8 @@ static int aemif_probe(struct platform_device *pdev) > platform_set_drvdata(pdev, aemif); > > aemif->clk = devm_clk_get(dev, NULL); > - if (IS_ERR(aemif->clk)) { > - dev_err(dev, "cannot get clock 'aemif'\n"); > - return PTR_ERR(aemif->clk); > - } > + if (IS_ERR(aemif->clk)) > + return dev_err_probe(dev, PTR_ERR(aemif->clk), "cannot get clock 'aemif'\n"); Bit of a long line, so maybe wrap. Up to maintainers Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > ret = clk_prepare_enable(aemif->clk); > if (ret) >
On Fri, 16 Aug 2024 12:54:27 +0200 Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > Store 'dmc->dev' in local 'dev' variable, to make several pieces of code > using it shorter and easier to read. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On Fri, 16 Aug 2024 12:54:25 +0200 Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > Obtain the device node reference with scoped/cleanup.h to reduce error > handling and make the code a bit simpler. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> I'm not entirely keen on the increased scope for which the reference is held but doesn't really matter. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> >
On 16/08/2024 12:54, Krzysztof Kozlowski wrote: > Changes in v2: > - Add tags > - Wrap lines before of_parse_phandle() (Jonathan) > - Few new patches (see individual changelogs) > - Link to v1: https://lore.kernel.org/r/20240812-cleanup-h-of-node-put-memory-v1-0-5065a8f361d2@linaro.org > > Make code a bit simpler and smaller by using cleanup.h when handling > device nodes. > > Best regards, Rebased (some changes around ti-aemif) and applied. Best regards, Krzysztof
On Fri, Aug 16, 2024 at 12:54:31PM GMT, Krzysztof Kozlowski wrote: > Use scoped for_each_child_of_node_scoped() when iterating over device > nodes to make code a bit simpler. > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > drivers/memory/tegra/mc.c | 11 +++-------- > 1 file changed, 3 insertions(+), 8 deletions(-) Acked-by: Thierry Reding <treding@nvidia.com>
On Fri, Aug 16, 2024 at 12:54:33PM GMT, Krzysztof Kozlowski wrote: > Use scoped for_each_child_of_node_scoped() when iterating over device > nodes to make code a bit simpler. > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > drivers/memory/tegra/tegra20-emc.c | 7 ++----- > 1 file changed, 2 insertions(+), 5 deletions(-) Acked-by: Thierry Reding <treding@nvidia.com>
On Wed, Aug 21, 2024 at 01:41:54PM GMT, Krzysztof Kozlowski wrote: > On 16/08/2024 12:54, Krzysztof Kozlowski wrote: > > Changes in v2: > > - Add tags > > - Wrap lines before of_parse_phandle() (Jonathan) > > - Few new patches (see individual changelogs) > > - Link to v1: https://lore.kernel.org/r/20240812-cleanup-h-of-node-put-memory-v1-0-5065a8f361d2@linaro.org > > > > Make code a bit simpler and smaller by using cleanup.h when handling > > device nodes. > > > > Best regards, > > Rebased (some changes around ti-aemif) and applied. Oh heh... nevermind those Acked-bys that I just sent out then. =) Thierry
On 16/08/2024 at 12:54, Krzysztof Kozlowski wrote: > Obtain the device node reference with scoped/cleanup.h to reduce error > handling and make the code a bit simpler. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Best regards, Nicolas > > --- > > Changes in v2: > 1. Wrap line before of_parse_phandle() > --- > drivers/memory/atmel-ebi.c | 29 ++++++++++------------------- > 1 file changed, 10 insertions(+), 19 deletions(-) > > diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c > index e8bb5f37f5cb..8f5b3302ee30 100644 > --- a/drivers/memory/atmel-ebi.c > +++ b/drivers/memory/atmel-ebi.c > @@ -6,6 +6,7 @@ > * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com> > */ > > +#include <linux/cleanup.h> > #include <linux/clk.h> > #include <linux/io.h> > #include <linux/mfd/syscon.h> > @@ -517,7 +518,7 @@ static int atmel_ebi_dev_disable(struct atmel_ebi *ebi, struct device_node *np) > static int atmel_ebi_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > - struct device_node *child, *np = dev->of_node, *smc_np; > + struct device_node *child, *np = dev->of_node; > struct atmel_ebi *ebi; > int ret, reg_cells; > struct clk *clk; > @@ -541,30 +542,24 @@ static int atmel_ebi_probe(struct platform_device *pdev) > > ebi->clk = clk; > > - smc_np = of_parse_phandle(dev->of_node, "atmel,smc", 0); > + struct device_node *smc_np __free(device_node) = > + of_parse_phandle(dev->of_node, "atmel,smc", 0); > > ebi->smc.regmap = syscon_node_to_regmap(smc_np); > - if (IS_ERR(ebi->smc.regmap)) { > - ret = PTR_ERR(ebi->smc.regmap); > - goto put_node; > - } > + if (IS_ERR(ebi->smc.regmap)) > + return PTR_ERR(ebi->smc.regmap); > > ebi->smc.layout = atmel_hsmc_get_reg_layout(smc_np); > - if (IS_ERR(ebi->smc.layout)) { > - ret = PTR_ERR(ebi->smc.layout); > - goto put_node; > - } > + if (IS_ERR(ebi->smc.layout)) > + return PTR_ERR(ebi->smc.layout); > > ebi->smc.clk = of_clk_get(smc_np, 0); > if (IS_ERR(ebi->smc.clk)) { > - if (PTR_ERR(ebi->smc.clk) != -ENOENT) { > - ret = PTR_ERR(ebi->smc.clk); > - goto put_node; > - } > + if (PTR_ERR(ebi->smc.clk) != -ENOENT) > + return PTR_ERR(ebi->smc.clk); > > ebi->smc.clk = NULL; > } > - of_node_put(smc_np); > ret = clk_prepare_enable(ebi->smc.clk); > if (ret) > return ret; > @@ -615,10 +610,6 @@ static int atmel_ebi_probe(struct platform_device *pdev) > } > > return of_platform_populate(np, NULL, NULL, dev); > - > -put_node: > - of_node_put(smc_np); > - return ret; > } > > static __maybe_unused int atmel_ebi_resume(struct device *dev) > > -- > 2.43.0 >