Message ID | 20240709105428.1176375-1-i@eh5.me |
---|---|
State | New |
Headers | show |
Series | pinctrl: rockchip: correct RK3328 iomux width flag for GPIO2-B pins | expand |
Am Dienstag, 9. Juli 2024, 12:54:28 CEST schrieb Huang-Huang Bao: > The base iomux offsets for each GPIO pin line are accumulatively > calculated based off iomux width flag in rockchip_pinctrl_get_soc_data. > If the iomux width flag is one of IOMUX_WIDTH_4BIT, IOMUX_WIDTH_3BIT or > IOMUX_WIDTH_2BIT, the base offset for next pin line would increase by 8 > bytes, otherwise it would increase by 4 bytes. > > Despite most of GPIO2-B iomux have 2-bit data width, which can be fit > into 4 bytes space with write mask, it actually take 8 bytes width for > whole GPIO2-B line. > > Commit e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 > GPIO2-B pins") wrongly set iomux width flag to 0, causing all base > iomux offset for line after GPIO2-B to be calculated wrong. Fix the > iomux width flag to IOMUX_WIDTH_2BIT so the offset after GPIO2-B is > correctly increased by 8, matching the actual width of GPIO2-B iomux. > > Fixes: e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins") > Cc: stable@vger.kernel.org > Reported-by: Richard Kojedzinszky <richard@kojedz.in> > Closes: https://lore.kernel.org/linux-rockchip/4f29b743202397d60edfb3c725537415@kojedz.in/ > Tested-by: Richard Kojedzinszky <richard@kojedz.in> > Signed-off-by: Huang-Huang Bao <i@eh5.me> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Thanks for providing the offset list below, now it matches the documentation > --- > > I have double checked the iomux offsets in debug message match iomux > register definitions in "GRF Register Description" section in RK3328 > TRM[1]. > > [1]: https://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf > > Kernel pinctrl debug message with dyndbg="file pinctrl-rockchip.c +p": > rockchip-pinctrl pinctrl: bank 0, iomux 0 has iom_offset 0x0 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 0, iomux 1 has iom_offset 0x4 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 0, iomux 2 has iom_offset 0x8 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 0, iomux 3 has iom_offset 0xc drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 0 has iom_offset 0x10 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 1 has iom_offset 0x14 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 2 has iom_offset 0x18 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 3 has iom_offset 0x1c drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 0 has iom_offset 0x20 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 1 has iom_offset 0x24 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 2 has iom_offset 0x2c drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 3 has iom_offset 0x34 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 0 has iom_offset 0x38 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 1 has iom_offset 0x40 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 2 has iom_offset 0x48 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 3 has iom_offset 0x4c drv_offset 0x0 > > The "Closes" links to test report from original reporter with original > issue contained, which was not delivered to any mailing list thus not > available on the web. > > Added CC stable as the problematic e8448a6c817c fixed by this patch was > recently merged to stable kernels. > > Sorry for the inconvenience caused, > Huang-Huang > > drivers/pinctrl/pinctrl-rockchip.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c > index 3f56991f5b89..f6da91941fbd 100644 > --- a/drivers/pinctrl/pinctrl-rockchip.c > +++ b/drivers/pinctrl/pinctrl-rockchip.c > @@ -3813,7 +3813,7 @@ static struct rockchip_pin_bank rk3328_pin_banks[] = { > PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0), > PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), > PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, > - 0, > + IOMUX_WIDTH_2BIT, > IOMUX_WIDTH_3BIT, > 0), > PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", > > base-commit: 4376e966ecb78c520b0faf239d118ecfab42a119 > -- > 2.45.2 >
On Tue, Jul 09, 2024 at 06:54:28PM +0800, Huang-Huang Bao wrote: > The base iomux offsets for each GPIO pin line are accumulatively > calculated based off iomux width flag in rockchip_pinctrl_get_soc_data. > If the iomux width flag is one of IOMUX_WIDTH_4BIT, IOMUX_WIDTH_3BIT or > IOMUX_WIDTH_2BIT, the base offset for next pin line would increase by 8 > bytes, otherwise it would increase by 4 bytes. > > Despite most of GPIO2-B iomux have 2-bit data width, which can be fit > into 4 bytes space with write mask, it actually take 8 bytes width for > whole GPIO2-B line. > > Commit e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 > GPIO2-B pins") wrongly set iomux width flag to 0, causing all base > iomux offset for line after GPIO2-B to be calculated wrong. Fix the > iomux width flag to IOMUX_WIDTH_2BIT so the offset after GPIO2-B is > correctly increased by 8, matching the actual width of GPIO2-B iomux. > > Fixes: e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins") > Cc: stable@vger.kernel.org > Reported-by: Richard Kojedzinszky <richard@kojedz.in> > Closes: https://lore.kernel.org/linux-rockchip/4f29b743202397d60edfb3c725537415@kojedz.in/ > Tested-by: Richard Kojedzinszky <richard@kojedz.in> > Signed-off-by: Huang-Huang Bao <i@eh5.me> Indeed fixes issues on RK3328 which appeared with the backport of commit in Fixes:-tag to linux-stable. Thank you for taking care of that. Tested-by: Daniel Golle <daniel@makrotopia.org> > --- > > I have double checked the iomux offsets in debug message match iomux > register definitions in "GRF Register Description" section in RK3328 > TRM[1]. > > [1]: https://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf > > Kernel pinctrl debug message with dyndbg="file pinctrl-rockchip.c +p": > rockchip-pinctrl pinctrl: bank 0, iomux 0 has iom_offset 0x0 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 0, iomux 1 has iom_offset 0x4 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 0, iomux 2 has iom_offset 0x8 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 0, iomux 3 has iom_offset 0xc drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 0 has iom_offset 0x10 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 1 has iom_offset 0x14 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 2 has iom_offset 0x18 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 3 has iom_offset 0x1c drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 0 has iom_offset 0x20 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 1 has iom_offset 0x24 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 2 has iom_offset 0x2c drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 3 has iom_offset 0x34 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 0 has iom_offset 0x38 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 1 has iom_offset 0x40 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 2 has iom_offset 0x48 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 3 has iom_offset 0x4c drv_offset 0x0 > > The "Closes" links to test report from original reporter with original > issue contained, which was not delivered to any mailing list thus not > available on the web. > > Added CC stable as the problematic e8448a6c817c fixed by this patch was > recently merged to stable kernels. > > Sorry for the inconvenience caused, > Huang-Huang > > drivers/pinctrl/pinctrl-rockchip.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > > base-commit: 4376e966ecb78c520b0faf239d118ecfab42a119 > -- > 2.45.2 > > diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c > index 3f56991f5b89..f6da91941fbd 100644 > --- a/drivers/pinctrl/pinctrl-rockchip.c > +++ b/drivers/pinctrl/pinctrl-rockchip.c > @@ -3813,7 +3813,7 @@ static struct rockchip_pin_bank rk3328_pin_banks[] = { > PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0), > PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), > PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, > - 0, > + IOMUX_WIDTH_2BIT, > IOMUX_WIDTH_3BIT, > 0), > PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3",
On Tue 2024-07-09 @ 06:54:28 PM, Huang-Huang Bao wrote: > The base iomux offsets for each GPIO pin line are accumulatively > calculated based off iomux width flag in rockchip_pinctrl_get_soc_data. > If the iomux width flag is one of IOMUX_WIDTH_4BIT, IOMUX_WIDTH_3BIT or > IOMUX_WIDTH_2BIT, the base offset for next pin line would increase by 8 > bytes, otherwise it would increase by 4 bytes. > > Despite most of GPIO2-B iomux have 2-bit data width, which can be fit > into 4 bytes space with write mask, it actually take 8 bytes width for > whole GPIO2-B line. > > Commit e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 > GPIO2-B pins") wrongly set iomux width flag to 0, causing all base > iomux offset for line after GPIO2-B to be calculated wrong. Fix the > iomux width flag to IOMUX_WIDTH_2BIT so the offset after GPIO2-B is > correctly increased by 8, matching the actual width of GPIO2-B iomux. Thanks! My rock-pi-e stopped being able to read a mcp3002 with the last update. Works again with this patch. Tested-by: Trevor Woerner <twoerner@gmail.com> > Fixes: e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins") > Cc: stable@vger.kernel.org > Reported-by: Richard Kojedzinszky <richard@kojedz.in> > Closes: https://lore.kernel.org/linux-rockchip/4f29b743202397d60edfb3c725537415@kojedz.in/ > Tested-by: Richard Kojedzinszky <richard@kojedz.in> > Signed-off-by: Huang-Huang Bao <i@eh5.me> > --- > > I have double checked the iomux offsets in debug message match iomux > register definitions in "GRF Register Description" section in RK3328 > TRM[1]. > > [1]: https://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf > > Kernel pinctrl debug message with dyndbg="file pinctrl-rockchip.c +p": > rockchip-pinctrl pinctrl: bank 0, iomux 0 has iom_offset 0x0 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 0, iomux 1 has iom_offset 0x4 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 0, iomux 2 has iom_offset 0x8 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 0, iomux 3 has iom_offset 0xc drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 0 has iom_offset 0x10 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 1 has iom_offset 0x14 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 2 has iom_offset 0x18 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 3 has iom_offset 0x1c drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 0 has iom_offset 0x20 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 1 has iom_offset 0x24 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 2 has iom_offset 0x2c drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 3 has iom_offset 0x34 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 0 has iom_offset 0x38 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 1 has iom_offset 0x40 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 2 has iom_offset 0x48 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 3 has iom_offset 0x4c drv_offset 0x0 > > The "Closes" links to test report from original reporter with original > issue contained, which was not delivered to any mailing list thus not > available on the web. > > Added CC stable as the problematic e8448a6c817c fixed by this patch was > recently merged to stable kernels. > > Sorry for the inconvenience caused, > Huang-Huang > > drivers/pinctrl/pinctrl-rockchip.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c > index 3f56991f5b89..f6da91941fbd 100644 > --- a/drivers/pinctrl/pinctrl-rockchip.c > +++ b/drivers/pinctrl/pinctrl-rockchip.c > @@ -3813,7 +3813,7 @@ static struct rockchip_pin_bank rk3328_pin_banks[] = { > PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0), > PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), > PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, > - 0, > + IOMUX_WIDTH_2BIT, > IOMUX_WIDTH_3BIT, > 0), > PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", > > base-commit: 4376e966ecb78c520b0faf239d118ecfab42a119 > -- > 2.45.2 > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip
Hi Linus, Am Dienstag, 9. Juli 2024, 12:54:28 CEST schrieb Huang-Huang Bao: > The base iomux offsets for each GPIO pin line are accumulatively > calculated based off iomux width flag in rockchip_pinctrl_get_soc_data. > If the iomux width flag is one of IOMUX_WIDTH_4BIT, IOMUX_WIDTH_3BIT or > IOMUX_WIDTH_2BIT, the base offset for next pin line would increase by 8 > bytes, otherwise it would increase by 4 bytes. could you pick this patch that fixes a pinctrl problem on rk3328? The change is good and I added my reviewed-by on july 29th. Thanks a lot Heiko > Despite most of GPIO2-B iomux have 2-bit data width, which can be fit > into 4 bytes space with write mask, it actually take 8 bytes width for > whole GPIO2-B line. > > Commit e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 > GPIO2-B pins") wrongly set iomux width flag to 0, causing all base > iomux offset for line after GPIO2-B to be calculated wrong. Fix the > iomux width flag to IOMUX_WIDTH_2BIT so the offset after GPIO2-B is > correctly increased by 8, matching the actual width of GPIO2-B iomux. > > Fixes: e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins") > Cc: stable@vger.kernel.org > Reported-by: Richard Kojedzinszky <richard@kojedz.in> > Closes: https://lore.kernel.org/linux-rockchip/4f29b743202397d60edfb3c725537415@kojedz.in/ > Tested-by: Richard Kojedzinszky <richard@kojedz.in> > Signed-off-by: Huang-Huang Bao <i@eh5.me> > --- > > I have double checked the iomux offsets in debug message match iomux > register definitions in "GRF Register Description" section in RK3328 > TRM[1]. > > [1]: https://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf > > Kernel pinctrl debug message with dyndbg="file pinctrl-rockchip.c +p": > rockchip-pinctrl pinctrl: bank 0, iomux 0 has iom_offset 0x0 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 0, iomux 1 has iom_offset 0x4 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 0, iomux 2 has iom_offset 0x8 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 0, iomux 3 has iom_offset 0xc drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 0 has iom_offset 0x10 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 1 has iom_offset 0x14 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 2 has iom_offset 0x18 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 1, iomux 3 has iom_offset 0x1c drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 0 has iom_offset 0x20 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 1 has iom_offset 0x24 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 2 has iom_offset 0x2c drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 2, iomux 3 has iom_offset 0x34 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 0 has iom_offset 0x38 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 1 has iom_offset 0x40 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 2 has iom_offset 0x48 drv_offset 0x0 > rockchip-pinctrl pinctrl: bank 3, iomux 3 has iom_offset 0x4c drv_offset 0x0 > > The "Closes" links to test report from original reporter with original > issue contained, which was not delivered to any mailing list thus not > available on the web. > > Added CC stable as the problematic e8448a6c817c fixed by this patch was > recently merged to stable kernels. > > Sorry for the inconvenience caused, > Huang-Huang > > drivers/pinctrl/pinctrl-rockchip.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c > index 3f56991f5b89..f6da91941fbd 100644 > --- a/drivers/pinctrl/pinctrl-rockchip.c > +++ b/drivers/pinctrl/pinctrl-rockchip.c > @@ -3813,7 +3813,7 @@ static struct rockchip_pin_bank rk3328_pin_banks[] = { > PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0), > PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), > PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, > - 0, > + IOMUX_WIDTH_2BIT, > IOMUX_WIDTH_3BIT, > 0), > PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", > > base-commit: 4376e966ecb78c520b0faf239d118ecfab42a119 > -- > 2.45.2 >
On Tue, Jul 9, 2024 at 12:55 PM Huang-Huang Bao <i@eh5.me> wrote: > The base iomux offsets for each GPIO pin line are accumulatively > calculated based off iomux width flag in rockchip_pinctrl_get_soc_data. > If the iomux width flag is one of IOMUX_WIDTH_4BIT, IOMUX_WIDTH_3BIT or > IOMUX_WIDTH_2BIT, the base offset for next pin line would increase by 8 > bytes, otherwise it would increase by 4 bytes. > > Despite most of GPIO2-B iomux have 2-bit data width, which can be fit > into 4 bytes space with write mask, it actually take 8 bytes width for > whole GPIO2-B line. > > Commit e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 > GPIO2-B pins") wrongly set iomux width flag to 0, causing all base > iomux offset for line after GPIO2-B to be calculated wrong. Fix the > iomux width flag to IOMUX_WIDTH_2BIT so the offset after GPIO2-B is > correctly increased by 8, matching the actual width of GPIO2-B iomux. > > Fixes: e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins") > Cc: stable@vger.kernel.org > Reported-by: Richard Kojedzinszky <richard@kojedz.in> > Closes: https://lore.kernel.org/linux-rockchip/4f29b743202397d60edfb3c725537415@kojedz.in/ > Tested-by: Richard Kojedzinszky <richard@kojedz.in> > Signed-off-by: Huang-Huang Bao <i@eh5.me> Patch applied for fixes! Yours, Linus Walleij
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index 3f56991f5b89..f6da91941fbd 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -3813,7 +3813,7 @@ static struct rockchip_pin_bank rk3328_pin_banks[] = { PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0), PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, - 0, + IOMUX_WIDTH_2BIT, IOMUX_WIDTH_3BIT, 0), PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3",