Message ID | 20240827164042.53698-2-marex@denx.de |
---|---|
State | Superseded |
Headers | show |
Series | [v3,1/5] dt-bindings: wireless: wilc1000: Document WILC3000 compatible string | expand |
On 8/27/24 18:37, Marek Vasut wrote: > Do not use wilc_get_chipid() outside of wlan.c . Instead, call > wilc_get_chipid() right after the SDIO/SPI interface has been > initialized to cache the device chipid, and then use the cached > chipid throughout the driver. Make wilc_get_chipid() static and > remove its prototype from wlan.h . Make wilc_get_chipid() return > a proper return value instead of a chipid. > > Signed-off-by: Marek Vasut <marex@denx.de> > --- > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Adham Abozaeid <adham.abozaeid@microchip.com> > Cc: Ajay Singh <ajay.kathat@microchip.com> > Cc: Alexis Lothoré <alexis.lothore@bootlin.com> > Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev> > Cc: Conor Dooley <conor+dt@kernel.org> > Cc: Eric Dumazet <edumazet@google.com> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Kalle Valo <kvalo@kernel.org> > Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> > Cc: Marek Vasut <marex@denx.de> > Cc: Paolo Abeni <pabeni@redhat.com> > Cc: Rob Herring <robh@kernel.org> > Cc: devicetree@vger.kernel.org > Cc: linux-wireless@vger.kernel.org > Cc: netdev@vger.kernel.org nit: The remaining wilc_getchipid() call in netdev.c should have been removed in this very same commit (it is removed in a later patch in this series, but it makes this commit depend on the last one). Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
On 8/28/24 10:39 AM, Alexis Lothoré wrote: > On 8/27/24 18:37, Marek Vasut wrote: >> Do not use wilc_get_chipid() outside of wlan.c . Instead, call >> wilc_get_chipid() right after the SDIO/SPI interface has been >> initialized to cache the device chipid, and then use the cached >> chipid throughout the driver. Make wilc_get_chipid() static and >> remove its prototype from wlan.h . Make wilc_get_chipid() return >> a proper return value instead of a chipid. >> >> Signed-off-by: Marek Vasut <marex@denx.de> >> --- >> Cc: "David S. Miller" <davem@davemloft.net> >> Cc: Adham Abozaeid <adham.abozaeid@microchip.com> >> Cc: Ajay Singh <ajay.kathat@microchip.com> >> Cc: Alexis Lothoré <alexis.lothore@bootlin.com> >> Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev> >> Cc: Conor Dooley <conor+dt@kernel.org> >> Cc: Eric Dumazet <edumazet@google.com> >> Cc: Jakub Kicinski <kuba@kernel.org> >> Cc: Kalle Valo <kvalo@kernel.org> >> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> >> Cc: Marek Vasut <marex@denx.de> >> Cc: Paolo Abeni <pabeni@redhat.com> >> Cc: Rob Herring <robh@kernel.org> >> Cc: devicetree@vger.kernel.org >> Cc: linux-wireless@vger.kernel.org >> Cc: netdev@vger.kernel.org > > nit: The remaining wilc_getchipid() call in netdev.c should have been removed in > this very same commit (it is removed in a later patch in this series, but it > makes this commit depend on the last one). > > Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com> Fixed in V4, thanks.
diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c index 41122199d51eb..90357c89ae29b 100644 --- a/drivers/net/wireless/microchip/wilc1000/sdio.c +++ b/drivers/net/wireless/microchip/wilc1000/sdio.c @@ -671,7 +671,6 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume) struct wilc_sdio *sdio_priv = wilc->bus_data; struct sdio_cmd52 cmd; int loop, ret; - u32 chipid; /** * function 0 csa enable @@ -760,18 +759,6 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume) return ret; } - /** - * make sure can read back chip id correctly - **/ - if (!resume) { - ret = wilc_sdio_read_reg(wilc, WILC_CHIPID, &chipid); - if (ret) { - dev_err(&func->dev, "Fail cmd read chip id...\n"); - return ret; - } - dev_err(&func->dev, "chipid (%08x)\n", chipid); - } - sdio_priv->isinit = true; return 0; } diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c index 533939e71534a..5b7dd37267de0 100644 --- a/drivers/net/wireless/microchip/wilc1000/wlan.c +++ b/drivers/net/wireless/microchip/wilc1000/wlan.c @@ -1402,9 +1402,37 @@ int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids, return ret; } +static int wilc_get_chipid(struct wilc *wilc) +{ + u32 chipid = 0; + u32 rfrevid = 0; + + if (wilc->chipid == 0) { + wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid); + wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID, + &rfrevid); + if (!is_wilc1000(chipid)) { + wilc->chipid = 0; + return -EINVAL; + } + if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */ + if (rfrevid != 0x1) + chipid = WILC_1000_BASE_ID_2A_REV1; + } else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */ + if (rfrevid == 0x4) + chipid = WILC_1000_BASE_ID_2B_REV1; + else if (rfrevid != 0x3) + chipid = WILC_1000_BASE_ID_2B_REV2; + } + + wilc->chipid = chipid; + } + + return 0; +} + static int init_chip(struct net_device *dev) { - u32 chipid; u32 reg; int ret = 0; struct wilc_vif *vif = netdev_priv(dev); @@ -1412,9 +1440,11 @@ static int init_chip(struct net_device *dev) acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP); - chipid = wilc_get_chipid(wilc, true); + ret = wilc_get_chipid(wilc); + if (ret) + goto release; - if ((chipid & 0xfff) != 0xa0) { + if ((wilc->chipid & 0xfff) != 0xa0) { ret = wilc->hif_func->hif_read_reg(wilc, WILC_CORTUS_RESET_MUX_SEL, ®); @@ -1445,34 +1475,6 @@ static int init_chip(struct net_device *dev) return ret; } -u32 wilc_get_chipid(struct wilc *wilc, bool update) -{ - u32 chipid = 0; - u32 rfrevid = 0; - - if (wilc->chipid == 0 || update) { - wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid); - wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID, - &rfrevid); - if (!is_wilc1000(chipid)) { - wilc->chipid = 0; - return wilc->chipid; - } - if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */ - if (rfrevid != 0x1) - chipid = WILC_1000_BASE_ID_2A_REV1; - } else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */ - if (rfrevid == 0x4) - chipid = WILC_1000_BASE_ID_2B_REV1; - else if (rfrevid != 0x3) - chipid = WILC_1000_BASE_ID_2B_REV2; - } - - wilc->chipid = chipid; - } - return wilc->chipid; -} - int wilc_load_mac_from_nv(struct wilc *wl) { int ret = -EINVAL; @@ -1535,9 +1537,19 @@ int wilc_wlan_init(struct net_device *dev) if (!wilc->hif_func->hif_is_init(wilc)) { acquire_bus(wilc, WILC_BUS_ACQUIRE_ONLY); ret = wilc->hif_func->hif_init(wilc, false); + if (!ret) + ret = wilc_get_chipid(wilc); release_bus(wilc, WILC_BUS_RELEASE_ONLY); if (ret) goto fail; + + if (!is_wilc1000(wilc->chipid)) { + netdev_err(dev, "Unsupported chipid: %x\n", wilc->chipid); + ret = -EINVAL; + goto fail; + } + + netdev_dbg(dev, "chipid (%08x)\n", wilc->chipid); } if (!wilc->vmm_table) diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h index dd2fb3c2f06a2..ae187192a79c6 100644 --- a/drivers/net/wireless/microchip/wilc1000/wlan.h +++ b/drivers/net/wireless/microchip/wilc1000/wlan.h @@ -443,6 +443,5 @@ void chip_wakeup(struct wilc *wilc); int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids, u32 count); int wilc_wlan_init(struct net_device *dev); -u32 wilc_get_chipid(struct wilc *wilc, bool update); int wilc_load_mac_from_nv(struct wilc *wilc); #endif
Do not use wilc_get_chipid() outside of wlan.c . Instead, call wilc_get_chipid() right after the SDIO/SPI interface has been initialized to cache the device chipid, and then use the cached chipid throughout the driver. Make wilc_get_chipid() static and remove its prototype from wlan.h . Make wilc_get_chipid() return a proper return value instead of a chipid. Signed-off-by: Marek Vasut <marex@denx.de> --- Cc: "David S. Miller" <davem@davemloft.net> Cc: Adham Abozaeid <adham.abozaeid@microchip.com> Cc: Ajay Singh <ajay.kathat@microchip.com> Cc: Alexis Lothoré <alexis.lothore@bootlin.com> Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev> Cc: Conor Dooley <conor+dt@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@kernel.org> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> Cc: Marek Vasut <marex@denx.de> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org --- V2: New patch V3: - Undo setup in wilc_wlan_init() if chip is neither wilc1000 or wilc3000 - Make wilc_get_chipid() return proper return value --- .../net/wireless/microchip/wilc1000/sdio.c | 13 ---- .../net/wireless/microchip/wilc1000/wlan.c | 74 +++++++++++-------- .../net/wireless/microchip/wilc1000/wlan.h | 1 - 3 files changed, 43 insertions(+), 45 deletions(-)