| Message ID | 20240913-starqltechn_integration_upstream-v4-5-2d2efd5c5877@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | This is continued work on Samsung S9(SM-9600) starqltechn | expand |
On Fri, 13 Sep 2024 18:07:48 +0300, Dzmitry Sankouski wrote: > Add maxim,max77705 core binding part. > > Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> > > --- > Changes in v4: > - change dts example intendation from tabs > to spaces > - remove interrupt-names property > - remove obvious reg description > - split long(>80) lines > --- > .../devicetree/bindings/mfd/maxim,max77705.yaml | 169 +++++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 170 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/maxim,max77705.example.dtb: pmic@66: fuel_gauge: 'shunt-resistor-micro-ohms' is a required property from schema $id: http://devicetree.org/schemas/mfd/maxim,max77705.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240913-starqltechn_integration_upstream-v4-5-2d2efd5c5877@gmail.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Fri, Sep 13, 2024 at 06:07:48PM +0300, Dzmitry Sankouski wrote: > Add maxim,max77705 core binding part. > > Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> > > --- > Changes in v4: > - change dts example intendation from tabs > to spaces > - remove interrupt-names property > - remove obvious reg description > - split long(>80) lines > --- > .../devicetree/bindings/mfd/maxim,max77705.yaml | 169 +++++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 170 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml > new file mode 100644 > index 000000000000..40a67d15e312 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml > @@ -0,0 +1,169 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/maxim,max77705.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Maxim MAX77705 Companion Power Management IC and USB Type-C interface IC > + > +maintainers: > + - Dzmitry Sankouski <dsankouski@gmail.com> > + > +description: | > + This is a part of device tree bindings for Maxim MAX77705 multi functional > + device. > + > + The Maxim MAX77705 is a Companion Power Management and Type-C > + interface IC which includes charger, fuelgauge, LED, haptic motor driver and > + Type-C management IC. > + > +properties: > + compatible: > + const: maxim,max77705 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + charger: > + $ref: /schemas/power/supply/power-supply.yaml > + additionalProperties: true No, true is only valid for incomplete schemas (i.e. common ones included by another complete schema). And since you reference another schema, you want 'unevaluatedProperties' instead if you want to use any properties defined in power-supply.yaml. > + properties: > + compatible: > + const: maxim,max77705-charger > + > + required: > + - compatible > + - monitored-battery > + > + fuel_gauge: fuel-gauge > + $ref: /schemas/power/supply/power-supply.yaml > + type: object > + additionalProperties: true > + description: MAX77705 fuel gauge with ModelGauge m5 EZ algorithm support. blank line > + properties: > + compatible: > + const: maxim,max77705-fuel-gauge > + > + shunt-resistor-micro-ohms: > + description: | Don't need '|'. > + The value of current sense resistor in microohms. > + > + required: > + - compatible > + - shunt-resistor-micro-ohms > + - monitored-battery > + - power-supplies > + > + haptic: > + type: object > + additionalProperties: false blank line > + properties: > + compatible: > + const: maxim,max77705-haptic > + > + haptic-supply: true > + > + pwms: > + maxItems: 1 > + > + required: > + - compatible > + - haptic-supply > + - pwms > + > + leds: > + type: object > + additionalProperties: false > + description: > + Up to 4 LEDs supported. One LED is represented by one child node. blank line > + properties: > + compatible: > + const: maxim,max77705-led > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + patternProperties: > + "^led@[0-3]$": > + type: object > + $ref: /schemas/leds/common.yaml# blank line > + properties: > + reg: > + description: > + LED index. blank line > + unevaluatedProperties: false blank line > + required: > + - reg > + > + required: > + - compatible > + > +required: > + - compatible > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/leds/common.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pmic@66 { > + compatible = "maxim,max77705"; > + reg = <0x66>; > + interrupt-parent = <&pm8998_gpios>; > + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-0 = <&chg_int_default>; > + pinctrl-names = "default"; > + > + leds { > + compatible = "maxim,max77705-led"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + led@1 { > + reg = <1>; > + label = "red:usr1"; > + }; > + > + led@2 { > + reg = <2>; > + label = "green:usr2"; > + }; > + > + led@3 { > + reg = <3>; > + label = "blue:usr3"; > + }; > + }; > + > + max77705_charger: charger { > + compatible = "maxim,max77705-charger"; > + monitored-battery = <&battery>; > + }; > + > + fuel_gauge { > + compatible = "maxim,max77705-fuel-gauge"; > + monitored-battery = <&battery>; > + power-supplies = <&max77705_charger>; > + rsense = <5>; Not documented. > + }; > + > + > + haptic { > + compatible = "maxim,max77705-haptic"; > + haptic-supply = <&vib_regulator>; > + pwms = <&vib_pwm 0 50000>; > + }; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index b65cfa1d322d..59d027591e34 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -14064,6 +14064,7 @@ B: mailto:linux-samsung-soc@vger.kernel.org > F: Documentation/devicetree/bindings/*/maxim,max14577.yaml > F: Documentation/devicetree/bindings/*/maxim,max77686.yaml > F: Documentation/devicetree/bindings/*/maxim,max77693.yaml > +F: Documentation/devicetree/bindings/*/maxim,max77705*.yaml > F: Documentation/devicetree/bindings/*/maxim,max77843.yaml > F: Documentation/devicetree/bindings/clock/maxim,max77686.txt > F: drivers/*/*max77843.c > > -- > 2.39.2 >
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml new file mode 100644 index 000000000000..40a67d15e312 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77705.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77705 Companion Power Management IC and USB Type-C interface IC + +maintainers: + - Dzmitry Sankouski <dsankouski@gmail.com> + +description: | + This is a part of device tree bindings for Maxim MAX77705 multi functional + device. + + The Maxim MAX77705 is a Companion Power Management and Type-C + interface IC which includes charger, fuelgauge, LED, haptic motor driver and + Type-C management IC. + +properties: + compatible: + const: maxim,max77705 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + charger: + $ref: /schemas/power/supply/power-supply.yaml + additionalProperties: true + properties: + compatible: + const: maxim,max77705-charger + + required: + - compatible + - monitored-battery + + fuel_gauge: + $ref: /schemas/power/supply/power-supply.yaml + type: object + additionalProperties: true + description: MAX77705 fuel gauge with ModelGauge m5 EZ algorithm support. + properties: + compatible: + const: maxim,max77705-fuel-gauge + + shunt-resistor-micro-ohms: + description: | + The value of current sense resistor in microohms. + + required: + - compatible + - shunt-resistor-micro-ohms + - monitored-battery + - power-supplies + + haptic: + type: object + additionalProperties: false + properties: + compatible: + const: maxim,max77705-haptic + + haptic-supply: true + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + leds: + type: object + additionalProperties: false + description: + Up to 4 LEDs supported. One LED is represented by one child node. + properties: + compatible: + const: maxim,max77705-led + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^led@[0-3]$": + type: object + $ref: /schemas/leds/common.yaml# + properties: + reg: + description: + LED index. + unevaluatedProperties: false + required: + - reg + + required: + - compatible + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77705"; + reg = <0x66>; + interrupt-parent = <&pm8998_gpios>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&chg_int_default>; + pinctrl-names = "default"; + + leds { + compatible = "maxim,max77705-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + label = "red:usr1"; + }; + + led@2 { + reg = <2>; + label = "green:usr2"; + }; + + led@3 { + reg = <3>; + label = "blue:usr3"; + }; + }; + + max77705_charger: charger { + compatible = "maxim,max77705-charger"; + monitored-battery = <&battery>; + }; + + fuel_gauge { + compatible = "maxim,max77705-fuel-gauge"; + monitored-battery = <&battery>; + power-supplies = <&max77705_charger>; + rsense = <5>; + }; + + + haptic { + compatible = "maxim,max77705-haptic"; + haptic-supply = <&vib_regulator>; + pwms = <&vib_pwm 0 50000>; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index b65cfa1d322d..59d027591e34 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14064,6 +14064,7 @@ B: mailto:linux-samsung-soc@vger.kernel.org F: Documentation/devicetree/bindings/*/maxim,max14577.yaml F: Documentation/devicetree/bindings/*/maxim,max77686.yaml F: Documentation/devicetree/bindings/*/maxim,max77693.yaml +F: Documentation/devicetree/bindings/*/maxim,max77705*.yaml F: Documentation/devicetree/bindings/*/maxim,max77843.yaml F: Documentation/devicetree/bindings/clock/maxim,max77686.txt F: drivers/*/*max77843.c
Add maxim,max77705 core binding part. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> --- Changes in v4: - change dts example intendation from tabs to spaces - remove interrupt-names property - remove obvious reg description - split long(>80) lines --- .../devicetree/bindings/mfd/maxim,max77705.yaml | 169 +++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 170 insertions(+)