diff mbox series

[12/21] dt-bindings: irqchip: adi,adsp-pint: add binding

Message ID 20240912-test-v1-12-458fa57c8ccf@analog.com
State New
Headers show
Series Adding support of ADI ARMv8 ADSP-SC598 SoC. | expand

Commit Message

Arturs Artamonovs via B4 Relay Sept. 12, 2024, 6:24 p.m. UTC
From: Arturs Artamonovs <arturs.artamonovs@analog.com>

Signed-off-by: Arturs Artamonovs <Arturs.Artamonovs@analog.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
---
 .../interrupt-controller/adi,adsp-pint.yaml        | 51 ++++++++++++++++++++++
 1 file changed, 51 insertions(+)

Comments

Krzysztof Kozlowski Sept. 16, 2024, 6:57 a.m. UTC | #1
On 12/09/2024 20:24, Arturs Artamonovs via B4 Relay wrote:
> From: Arturs Artamonovs <arturs.artamonovs@analog.com>
> 

You must always run checkpatch. We cannot take empty commit msgs, for
obvious reasons.

A nit, subject: drop second/last, redundant "bindings". The
"dt-bindings" prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18

Instead describe the hardware.


> Signed-off-by: Arturs Artamonovs <Arturs.Artamonovs@analog.com>
> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
> Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
> Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
> ---
>  .../interrupt-controller/adi,adsp-pint.yaml        | 51 ++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/adi,adsp-pint.yaml b/Documentation/devicetree/bindings/interrupt-controller/adi,adsp-pint.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..b5ecf0cf1d2ceb580f45467ffe1550ae3280d1a3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/adi,adsp-pint.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/adi,adsp-pint.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices Port Pin Interrupt for SC5XX-family processors
> +
> +maintainers:
> +  - Arturs Artamonovs <arturs.artamonovs@analog.com>
> +  - Utsav Agarwal <Utsav.Agarwal@analog.com>
> +
> +description: |
> +  Analog Devices Port Pin Interrupt driver for SC5XX-family processors
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,adsp-pint

All previous comments apply.

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/clock/adi-sc5xx-clock.h>

Where do you user it?

> +
> +    pint0: pint@31005000 {
> +      compatible = "adi,adsp-pint";
> +      reg = <0x31005000 0xFF>;
> +      interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> +    };
> +

All previous comments apply.

> +    pint1: pint@31005100 {
> +      compatible = "adi,adsp-pint";
> +      reg = <0x31005100 0xFF>;
> +      interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> +    };
> +...
> 

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/adi,adsp-pint.yaml b/Documentation/devicetree/bindings/interrupt-controller/adi,adsp-pint.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..b5ecf0cf1d2ceb580f45467ffe1550ae3280d1a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/adi,adsp-pint.yaml
@@ -0,0 +1,51 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/adi,adsp-pint.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices Port Pin Interrupt for SC5XX-family processors
+
+maintainers:
+  - Arturs Artamonovs <arturs.artamonovs@analog.com>
+  - Utsav Agarwal <Utsav.Agarwal@analog.com>
+
+description: |
+  Analog Devices Port Pin Interrupt driver for SC5XX-family processors
+
+properties:
+  compatible:
+    enum:
+      - adi,adsp-pint
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/adi-sc5xx-clock.h>
+
+    pint0: pint@31005000 {
+      compatible = "adi,adsp-pint";
+      reg = <0x31005000 0xFF>;
+      interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+    pint1: pint@31005100 {
+      compatible = "adi,adsp-pint";
+      reg = <0x31005100 0xFF>;
+      interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...