| Message ID | 20240913075307.154435-1-antoniu.miclaus@analog.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v4,1/2] dt-bindings: touchscreen: add ad7877 support | expand |
On Fri, Sep 13, 2024 at 10:52:29AM +0300, Antoniu Miclaus wrote: > Add device tree bindings for ad7877. > > Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> > --- > changes in v4: > - add bindings patch first > - update commit title/body based on review. > - add units for pen-down-acc-interval property. > - add default value for adi,acquisition-time-us and adi,vref-delay-us property > .../input/touchscreen/adi,ad7877.yaml | 106 ++++++++++++++++++ > 1 file changed, 106 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/adi,ad7877.yaml > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/adi,ad7877.yaml b/Documentation/devicetree/bindings/input/touchscreen/adi,ad7877.yaml > new file mode 100644 > index 000000000000..c472f50f7a59 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/touchscreen/adi,ad7877.yaml > @@ -0,0 +1,106 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/input/touchscreen/adi,ad7877.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices AD7877 Touch Screen Controller > + > +maintainers: > + - Antoniu Miclaus <antoniu.miclaus@analog.com> > + > +description: | > + Analog Devices Touch Screen Controller > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7877.pdf > + > +allOf: > + - $ref: touchscreen.yaml# > + - $ref: /schemas/spi/spi-peripheral-props.yaml# > + > +properties: > + compatible: > + enum: > + - adi,ad7877 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + spi-max-frequency: > + description: AD7877 SPI bus clock frequency. > + minimum: 10000 > + maximum: 20000000 > + > + adi,stopacq-polarity: > + description: The polarity of the signal applied to the STOPACQ pin. > + $ref: /schemas/types.yaml#/definitions/string > + enum: [low, high] Missing default. > + > + adi,first-conv-delay-ns: > + description: Delay in ns before the first conversion. > + enum: [500, 128000, 1000000, 8000000] Missing default. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/input/touchscreen/adi,ad7877.yaml b/Documentation/devicetree/bindings/input/touchscreen/adi,ad7877.yaml new file mode 100644 index 000000000000..c472f50f7a59 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/adi,ad7877.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/adi,ad7877.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7877 Touch Screen Controller + +maintainers: + - Antoniu Miclaus <antoniu.miclaus@analog.com> + +description: | + Analog Devices Touch Screen Controller + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7877.pdf + +allOf: + - $ref: touchscreen.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - adi,ad7877 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: + description: AD7877 SPI bus clock frequency. + minimum: 10000 + maximum: 20000000 + + adi,stopacq-polarity: + description: The polarity of the signal applied to the STOPACQ pin. + $ref: /schemas/types.yaml#/definitions/string + enum: [low, high] + + adi,first-conv-delay-ns: + description: Delay in ns before the first conversion. + enum: [500, 128000, 1000000, 8000000] + + adi,pen-down-acc-interval-us: + description: Enable the ADC to repeatedly perform conversions. + enum: [0, 500, 1000, 8000] + default: 0 + + adi,acquisition-time-us: + description: Select acquisition times in us for the ADC. + enum: [2, 4, 8, 16] + default: 2 + + adi,vref-delay-us: + description: Delay required for the SPI transfers depending on the VREF used. + default: 100 + + touchscreen-average-samples: + enum: [1, 4, 8, 16] + + touchscreen-x-plate-ohms: + default: 400 + + touchscreen-min-x: true + touchscreen-min-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-max-pressure: true + +required: + - compatible + - reg + - interrupts + - touchscreen-average-samples + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@0 { + compatible = "adi,ad7877"; + reg = <0>; + spi-max-frequency = <20000000>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + adi,vref-delay-us = <100>; + adi,stopacq-polarity = "low"; + adi,first-conv-delay-ns = <500>; + adi,pen-down-acc-interval-us = <0>; + adi,acquisition-time-us = <2>; + touchscreen-average-samples = <16>; + touchscreen-x-plate-ohms = <400>; + touchscreen-min-x = <0>; + touchscreen-min-y = <0>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-max-pressure = <4095>; + }; + }; +...
Add device tree bindings for ad7877. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> --- changes in v4: - add bindings patch first - update commit title/body based on review. - add units for pen-down-acc-interval property. - add default value for adi,acquisition-time-us and adi,vref-delay-us property .../input/touchscreen/adi,ad7877.yaml | 106 ++++++++++++++++++ 1 file changed, 106 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/adi,ad7877.yaml