diff mbox series

[v4,08/10] arm64: dts: exynos: Add initial support for exynos8895 SoC

Message ID 20240909110017.419960-9-ivo.ivanov.ivanov1@gmail.com
State New
Headers show
Series Add minimal Exynos8895 SoC and SM-G950F support | expand

Commit Message

Ivaylo Ivanov Sept. 9, 2024, 11 a.m. UTC 
Exynos 8895 SoC is an ARMv8 mobile SoC found in the Samsung Galaxy
S8 (dreamlte), S8 Plus (dream2lte), Note 8 (greatlte) and the Meizu
15 Plus (m1891). Add minimal support for that SoC, including:

- All 8 cores via PSCI
- ChipID
- Generic ARMV8 Timer
- Enumarate all pinctrl nodes

The devices using this SoC suffer from an issue caused by the stock
Samsung bootloader, as it doesn't configure CNTFRQ_EL0. Hence it's
needed to hardcode the adequate frequency in the timer node,
otherwise the kernel panics.

Further platform support will be added over time.

Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
---
 .../boot/dts/exynos/exynos8895-pinctrl.dtsi   | 1092 +++++++++++++++++
 arch/arm64/boot/dts/exynos/exynos8895.dtsi    |  249 ++++
 2 files changed, 1341 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos8895.dtsi

Comments

Krzysztof Kozlowski Sept. 16, 2024, 2:23 p.m. UTC | #1 
On Mon, Sep 09, 2024 at 02:00:15PM +0300, Ivaylo Ivanov wrote:

> +&pinctrl_peric0 {
> +	gpd0: gpd0-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpd1: gpd1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpd2: gpd2-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpd3: gpd3-gpio-bank {

These should be ordered by node name. Same in peric1.

> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpb1: gpb1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpe7: gpe7-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpf1: gpf1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};


> diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
> new file mode 100644
> index 000000000..59af33420
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
> @@ -0,0 +1,249 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> +/*
> + * Samsung's Exynos 8895 SoC device tree source
> + *
> + * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	compatible = "samsung,exynos8895";
> +	#address-cells = <2>;
> +	#size-cells = <1>;
> +
> +	interrupt-parent = <&gic>;
> +
> +	aliases {
> +		pinctrl0 = &pinctrl_alive;
> +		pinctrl1 = &pinctrl_abox;
> +		pinctrl2 = &pinctrl_vts;
> +		pinctrl3 = &pinctrl_fsys0;
> +		pinctrl4 = &pinctrl_fsys1;
> +		pinctrl5 = &pinctrl_busc;
> +		pinctrl6 = &pinctrl_peric0;
> +		pinctrl7 = &pinctrl_peric1;
> +	};
> +
> +	arm-a53-pmu {
> +		compatible = "arm,cortex-a53-pmu";
> +		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-affinity = <&cpu0>,
> +				     <&cpu1>,
> +				     <&cpu2>,
> +				     <&cpu3>;
> +	};
> +
> +	/* There's no PMU model for the Mongoose cores */
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +				core1 {
> +					cpu = <&cpu1>;
> +				};
> +				core2 {
> +					cpu = <&cpu2>;
> +				};
> +				core3 {
> +					cpu = <&cpu3>;
> +				};
> +			};
> +
> +			cluster1 {
> +				core0 {
> +					cpu = <&cpu4>;
> +				};
> +				core1 {
> +					cpu = <&cpu5>;
> +				};
> +				core2 {
> +					cpu = <&cpu6>;
> +				};
> +				core3 {
> +					cpu = <&cpu7>;
> +				};
> +			};
> +		};
> +
> +		cpu0: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x100>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu1: cpu@101 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x101>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu2: cpu@102 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x102>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu3: cpu@103 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x103>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu4: cpu@0 {

Why cpu@0 is cpu4 not cpu0? Anyway, these should be ordered by unit
address.

> +
> +	oscclk: osc-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-output-names = "oscclk";
> +	};
> +
> +	psci {
> +		compatible = "arm,psci";
> +		method = "smc";
> +		cpu_suspend = <0xc4000001>;
> +		cpu_off = <0x84000002>;
> +		cpu_on = <0xc4000003>;
> +	};
> +
> +	timer {

Keep order by names, timer goes after soc.

> +		compatible = "arm,armv8-timer";
> +		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> +		/*
> +		 * Non-updatable, broken stock Samsung bootloader does not
> +		 * configure CNTFRQ_EL0
> +		 */
> +		clock-frequency = <26000000>;
> +	};
> +
> +	soc: soc@0 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x0 0x0 0x20000000>;

ranges is the second property (see DTS coding style).

> +
> +		chipid@10000000 {
> +			compatible = "samsung,exynos8895-chipid",
> +				     "samsung,exynos850-chipid";
> +			reg = <0x10000000 0x24>;
> +		};
> +
> +		gic: interrupt-controller@10201000 {
> +			compatible = "arm,gic-400";
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +			interrupt-controller;
> +			reg = <0x10201000 0x1000>,

reg is second, please follow DTS coding style for new submissions.

> +			      <0x10202000 0x1000>,
> +			      <0x10204000 0x2000>,
> +			      <0x10206000 0x2000>;
> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
> +						 IRQ_TYPE_LEVEL_HIGH)>;
> +		};

Best regards,
Krzysztof
Ivaylo Ivanov Sept. 18, 2024, 5:54 p.m. UTC | #2 
On 9/16/24 17:23, Krzysztof Kozlowski wrote:
> On Mon, Sep 09, 2024 at 02:00:15PM +0300, Ivaylo Ivanov wrote:
>
>> +&pinctrl_peric0 {
>> +	gpd0: gpd0-gpio-bank {
>> +		gpio-controller;
>> +		#gpio-cells = <2>;
>> +
>> +		interrupt-controller;
>> +		#interrupt-cells = <2>;
>> +	};
>> +
>> +	gpd1: gpd1-gpio-bank {
>> +		gpio-controller;
>> +		#gpio-cells = <2>;
>> +
>> +		interrupt-controller;
>> +		#interrupt-cells = <2>;
>> +	};
>> +
>> +	gpd2: gpd2-gpio-bank {
>> +		gpio-controller;
>> +		#gpio-cells = <2>;
>> +
>> +		interrupt-controller;
>> +		#interrupt-cells = <2>;
>> +	};
>> +
>> +	gpd3: gpd3-gpio-bank {
> These should be ordered by node name. Same in peric1.
Alright.
>
>> +		gpio-controller;
>> +		#gpio-cells = <2>;
>> +
>> +		interrupt-controller;
>> +		#interrupt-cells = <2>;
>> +	};
>> +
>> +	gpb1: gpb1-gpio-bank {
>> +		gpio-controller;
>> +		#gpio-cells = <2>;
>> +
>> +		interrupt-controller;
>> +		#interrupt-cells = <2>;
>> +	};
>> +
>> +	gpe7: gpe7-gpio-bank {
>> +		gpio-controller;
>> +		#gpio-cells = <2>;
>> +
>> +		interrupt-controller;
>> +		#interrupt-cells = <2>;
>> +	};
>> +
>> +	gpf1: gpf1-gpio-bank {
>> +		gpio-controller;
>> +		#gpio-cells = <2>;
>> +
>> +		interrupt-controller;
>> +		#interrupt-cells = <2>;
>> +	};
>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
>> new file mode 100644
>> index 000000000..59af33420
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
>> @@ -0,0 +1,249 @@
>> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
>> +/*
>> + * Samsung's Exynos 8895 SoC device tree source
>> + *
>> + * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> +	compatible = "samsung,exynos8895";
>> +	#address-cells = <2>;
>> +	#size-cells = <1>;
>> +
>> +	interrupt-parent = <&gic>;
>> +
>> +	aliases {
>> +		pinctrl0 = &pinctrl_alive;
>> +		pinctrl1 = &pinctrl_abox;
>> +		pinctrl2 = &pinctrl_vts;
>> +		pinctrl3 = &pinctrl_fsys0;
>> +		pinctrl4 = &pinctrl_fsys1;
>> +		pinctrl5 = &pinctrl_busc;
>> +		pinctrl6 = &pinctrl_peric0;
>> +		pinctrl7 = &pinctrl_peric1;
>> +	};
>> +
>> +	arm-a53-pmu {
>> +		compatible = "arm,cortex-a53-pmu";
>> +		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
>> +		interrupt-affinity = <&cpu0>,
>> +				     <&cpu1>,
>> +				     <&cpu2>,
>> +				     <&cpu3>;
>> +	};
>> +
>> +	/* There's no PMU model for the Mongoose cores */
>> +
>> +	cpus {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		cpu-map {
>> +			cluster0 {
>> +				core0 {
>> +					cpu = <&cpu0>;
>> +				};
>> +				core1 {
>> +					cpu = <&cpu1>;
>> +				};
>> +				core2 {
>> +					cpu = <&cpu2>;
>> +				};
>> +				core3 {
>> +					cpu = <&cpu3>;
>> +				};
>> +			};
>> +
>> +			cluster1 {
>> +				core0 {
>> +					cpu = <&cpu4>;
>> +				};
>> +				core1 {
>> +					cpu = <&cpu5>;
>> +				};
>> +				core2 {
>> +					cpu = <&cpu6>;
>> +				};
>> +				core3 {
>> +					cpu = <&cpu7>;
>> +				};
>> +			};
>> +		};
>> +
>> +		cpu0: cpu@100 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a53";
>> +			reg = <0x100>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu1: cpu@101 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a53";
>> +			reg = <0x101>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu2: cpu@102 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a53";
>> +			reg = <0x102>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu3: cpu@103 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a53";
>> +			reg = <0x103>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		cpu4: cpu@0 {
> Why cpu@0 is cpu4 not cpu0? Anyway, these should be ordered by unit
> address.

cpu@100 is the boot core of the first cluster consisting of cortex-a53

cores, hence why it's labelled as cpu0. The second cluster contains

the Mongoose cores, labelled and ordered after the first cluster.


It's ordered like so on a lot of SoCs for sanity's sake, hence why I

believe it should stay like that.


If you still think that they must be ordered by unit address, please

explicitly let me know so that I include that change in the v5.


Regards, Ivo.

>
>> +
>> +	oscclk: osc-clock {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-output-names = "oscclk";
>> +	};
>> +
>> +	psci {
>> +		compatible = "arm,psci";
>> +		method = "smc";
>> +		cpu_suspend = <0xc4000001>;
>> +		cpu_off = <0x84000002>;
>> +		cpu_on = <0xc4000003>;
>> +	};
>> +
>> +	timer {
> Keep order by names, timer goes after soc.
>
>> +		compatible = "arm,armv8-timer";
>> +		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
>> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>> +		/*
>> +		 * Non-updatable, broken stock Samsung bootloader does not
>> +		 * configure CNTFRQ_EL0
>> +		 */
>> +		clock-frequency = <26000000>;
>> +	};
>> +
>> +	soc: soc@0 {
>> +		compatible = "simple-bus";
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0x0 0x0 0x0 0x20000000>;
> ranges is the second property (see DTS coding style).
>
>> +
>> +		chipid@10000000 {
>> +			compatible = "samsung,exynos8895-chipid",
>> +				     "samsung,exynos850-chipid";
>> +			reg = <0x10000000 0x24>;
>> +		};
>> +
>> +		gic: interrupt-controller@10201000 {
>> +			compatible = "arm,gic-400";
>> +			#interrupt-cells = <3>;
>> +			#address-cells = <0>;
>> +			interrupt-controller;
>> +			reg = <0x10201000 0x1000>,
> reg is second, please follow DTS coding style for new submissions.
>
>> +			      <0x10202000 0x1000>,
>> +			      <0x10204000 0x2000>,
>> +			      <0x10206000 0x2000>;
>> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
>> +						 IRQ_TYPE_LEVEL_HIGH)>;
>> +		};
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski Sept. 19, 2024, 10:25 a.m. UTC | #3 
On 18/09/2024 19:54, Ivaylo Ivanov wrote:
>>> +		cpu3: cpu@103 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a53";
>>> +			reg = <0x103>;
>>> +			enable-method = "psci";
>>> +		};
>>> +
>>> +		cpu4: cpu@0 {
>> Why cpu@0 is cpu4 not cpu0? Anyway, these should be ordered by unit
>> address.
> 
> cpu@100 is the boot core of the first cluster consisting of cortex-a53
> 
> cores, hence why it's labelled as cpu0. The second cluster contains
> 
> the Mongoose cores, labelled and ordered after the first cluster.
> 
> 
> It's ordered like so on a lot of SoCs for sanity's sake, hence why I
> 
> believe it should stay like that.

I tend to switch to style expressed in DTS coding style, especially that
we might use at some point sorting tool which would then need exception
for CPUs. Keep existing labels, assuming they reflect reality, but order
by unit address.

> 
> 
> If you still think that they must be ordered by unit address, please
> 
> explicitly let me know so that I include that change in the v5.
> 


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
new file mode 100644
index 000000000..bfb4ffb5d
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
@@ -0,0 +1,1092 @@ 
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 8895 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	bt_hostwake: bt-hostwake-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpa4-4", "gpa4-3", "gpa4-2", "gpa4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pcie_wake: pcie-wake-pins {
+		samsung,pins = "gpa3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	wlan_host_wake: wlan-host-wake-pins {
+		  samsung,pins = "gpa0-7";
+		  samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		  samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		  samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		  samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_abox {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_vts {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpi0: gpi0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpi1: gpi1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gpi0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpi0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpj1: gpj1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpj0: gpj0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpj0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpj0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpj0-3", "gpj0-4", "gpj0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	/* For Drive strength swapping */
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	cfg_wlanen: cfg-wlanen-pins {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	bt_en: bt-en-pins {
+		samsung,pins ="gpj1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_btwake: bt-btwake-pins {
+		samsung,pins = "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_busc {
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpb2-1", "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	speedy_bus: speedy-bus-pins {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd3: gpd3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe7: gpe7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpd0-7", "gpd0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus: uart3-bus-pins {
+		samsung,pins = "gpd1-7", "gpd1-6", "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus: uart4-bus-pins {
+		samsung,pins = "gpd2-3", "gpd2-2", "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus: uart5-bus-pins {
+		samsung,pins = "gpd3-3", "gpd3-2", "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpd1-7", "gpd1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpd3-3", "gpd3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c14_bus: hs-i2c14-bus-pins {
+		samsung,pins = "gpe6-3", "gpe6-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpd1-7", "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpd1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpd2-3", "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpd2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpd3-3", "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpd3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe5: gpe5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe6: gpe6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe2: gpe2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe3: gpe3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe4: gpe4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart6_bus: uart6-bus-pins {
+		samsung,pins = "gpe5-3", "gpe5-2", "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus: uart7-bus-pins {
+		samsung,pins = "gpe1-3", "gpe1-2", "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus: uart8-bus-pins {
+		samsung,pins = "gpe1-7", "gpe1-6", "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus: uart9-bus-pins {
+		samsung,pins = "gpe2-3", "gpe2-2", "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus: uart10-bus-pins {
+		samsung,pins = "gpe2-7", "gpe2-6", "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus: uart11-bus-pins {
+		samsung,pins = "gpe3-3", "gpe3-2", "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus: uart12-bus-pins {
+		samsung,pins = "gpe3-7", "gpe3-6", "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus: uart13-bus-pins {
+		samsung,pins = "gpe4-3", "gpe4-2", "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus: uart14-bus-pins {
+		samsung,pins = "gpe4-7", "gpe4-6", "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpe5-7", "gpe5-6", "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpc2-3", "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpc2-7", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpe5-3", "gpe5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpe1-3", "gpe1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpe1-7", "gpe1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpe2-3", "gpe2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpe2-7", "gpe2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpe3-3", "gpe3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpe3-7", "gpe3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpe4-3", "gpe4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpe4-7", "gpe4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpe5-7", "gpe5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpc3-3", "gpc3-2", "gpc3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpc3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpc3-7", "gpc3-6", "gpc3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpc3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpe5-3", "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpe5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpe1-3", "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpe1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpe1-7", "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpe1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpe2-3", "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpe2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpe2-7", "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpe2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpe3-3", "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpe3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpe3-7", "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpe3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpe4-3", "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpe4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpe4-7", "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpe4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpe5-7", "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpe5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hrm_irq: hrm-irq-pins {
+		samsung,pins = "gpe6-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
new file mode 100644
index 000000000..59af33420
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
@@ -0,0 +1,249 @@ 
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 8895 SoC device tree source
+ *
+ * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos8895";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_abox;
+		pinctrl2 = &pinctrl_vts;
+		pinctrl3 = &pinctrl_fsys0;
+		pinctrl4 = &pinctrl_fsys1;
+		pinctrl5 = &pinctrl_busc;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+	};
+
+	arm-a53-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	/* There's no PMU model for the Mongoose cores */
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@0 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@1 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@2 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@3 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	oscclk: osc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <26000000>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos8895-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		gic: interrupt-controller@10201000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x10201000 0x1000>,
+			      <0x10202000 0x1000>,
+			      <0x10204000 0x2000>,
+			      <0x10206000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		pinctrl_peric0: pinctrl@104d0000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x104d0000 0x1000>;
+			interrupts = <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric1: pinctrl@10980000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x10980000 0x1000>;
+			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys0: pinctrl@11050000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x11050000 0x1000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys1: pinctrl@11430000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x11430000 0x1000>;
+			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_abox: pinctrl@13e60000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x13e60000 0x1000>;
+		};
+
+		pinctrl_vts: pinctrl@14080000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x14080000 0x1000>;
+		};
+
+		pinctrl_busc: pinctrl@15a30000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x15a30000 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@16480000 {
+			compatible = "samsung,exynos8895-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x16480000 0x10000>;
+		};
+
+		pinctrl_alive: pinctrl@164b0000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x164b0000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos8895-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
+
+#include "exynos8895-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"