| Message ID | 20240919170018.13672-4-alex.vinarskis@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | X1E Dell XPS 9345 support | expand |
On Thu, Sep 19, 2024 at 10:01 AM Aleksandrs Vinarskis <alex.vinarskis@gmail.com> wrote: > > Initial support for Dell XPS 9345 13" 2024 (Tributo) based on X1E80100. > > Working: > * Touchpad > * Keyboard (only post suspend&resume, i2c-hid patch WIP) > * eDP, with brightness control > * NVME > * USB Type-C ports in USB2/USB3 (one orientation) > * WiFi > * GPU/aDSP/cDSP firmware loading (requires binaries from Windows) > * Lid switch > * Sleep/suspend, nothing visibly broken on resume > > Not working: > * Speakers (WIP, pin guessing, x4 WSA8845) > * Microphones (WIP, pin guessing) > * Fingerprint Reader (WIP, USB MP with ptn3222) > * USB as DP/USB3 (WIP, PS8830 based) > * Camera > * Battery Info > > Should be working, but cannot be tested due to lack of hw: > * Higher res OLED, higher res IPS panels My suspicion is that OLED vs IPS will require different dtb. I'm expecting the OLED to use samsung,atna33xc20 panel driver (see "arm64: dts: qcom: x1e80100-yoga: Update panel bindings"), but IPS can probably use edp-panel. I'm not sure if anyone has gotten both panels working on any other device that has both IPS and OLED variants, so this remains a theory. The t14s, which also has both IPS and OLED, has different DMI/CHID values for the different SKUs, so DtbLoader should be able to pick the correct dtb, once it exists. BR, -R > * Touchscreen > > Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../dts/qcom/x1e80100-dell-tributo-13.dts | 860 ++++++++++++++++++ > 2 files changed, 861 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index ae002c7cf126..111c589d6bae 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -271,6 +271,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb > +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-tributo-13.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts > new file mode 100644 > index 000000000000..d387f133c398 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts > @@ -0,0 +1,860 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. > + * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@gmail.com> > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/gpio-keys.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > + > +#include "x1e80100.dtsi" > +#include "x1e80100-pmics.dtsi" > + > +/ { > + model = "Dell XPS 13 9345"; > + compatible = "dell,tributo-13", "qcom,x1e80100"; > + chassis-type = "laptop"; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-0 = <&hall_int_n_default>; > + pinctrl-names = "default"; > + > + switch-lid { > + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; > + linux,input-type = <EV_SW>; > + linux,code = <SW_LID>; > + wakeup-source; > + wakeup-event-action = <EV_ACT_DEASSERTED>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&cam_indicator_en>; > + > + led-camera-indicator { > + label = "white:camera-indicator"; > + function = LED_FUNCTION_INDICATOR; > + color = <LED_COLOR_ID_WHITE>; > + gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "none"; > + default-state = "off"; > + /* Reuse as a panic indicator until we get a "camera on" trigger */ > + panic-indicator; > + }; > + }; > + > + pmic-glink { > + compatible = "qcom,x1e80100-pmic-glink", > + "qcom,sm8550-pmic-glink", > + "qcom,pmic-glink"; > + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, > + <&tlmm 123 GPIO_ACTIVE_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* Right-side USB Type-C port */ > + connector@0 { > + compatible = "usb-c-connector"; > + reg = <0>; > + power-role = "dual"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + pmic_glink_ss0_hs_in: endpoint { > + remote-endpoint = <&usb_1_ss0_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + pmic_glink_ss0_ss_in: endpoint { > + remote-endpoint = <&usb_1_ss0_qmpphy_out>; > + }; > + }; > + }; > + }; > + > + /* Left-side USB Type-C port */ > + connector@1 { > + compatible = "usb-c-connector"; > + reg = <1>; > + power-role = "dual"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + pmic_glink_ss1_hs_in: endpoint { > + remote-endpoint = <&usb_1_ss1_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + pmic_glink_ss1_ss_in: endpoint { > + remote-endpoint = <&usb_1_ss1_qmpphy_out>; > + }; > + }; > + }; > + }; > + }; > + > + reserved-memory { > + linux,cma { > + compatible = "shared-dma-pool"; > + size = <0x0 0x8000000>; > + reusable; > + linux,cma-default; > + }; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vreg_edp_3p3: regulator-edp-3p3 { > + compatible = "regulator-fixed"; > + > + regulator-name = "VREG_EDP_3P3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-0 = <&edp_reg_en>; > + pinctrl-names = "default"; > + > + regulator-boot-on; > + }; > + > + vreg_nvme: regulator-nvme { > + compatible = "regulator-fixed"; > + > + regulator-name = "VREG_NVME_3P3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-0 = <&nvme_reg_en>; > + pinctrl-names = "default"; > + }; > +}; > + > +&apps_rsc { > + regulators-0 { > + compatible = "qcom,pm8550-rpmh-regulators"; > + qcom,pmic-id = "b"; > + vdd-bob1-supply = <&vph_pwr>; > + vdd-bob2-supply = <&vph_pwr>; > + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; > + vdd-l2-l13-l14-supply = <&vreg_bob1>; > + vdd-l5-l16-supply = <&vreg_bob1>; > + vdd-l6-l7-supply = <&vreg_bob2>; > + vdd-l8-l9-supply = <&vreg_bob1>; > + vdd-l12-supply = <&vreg_s5j_1p2>; > + vdd-l15-supply = <&vreg_s4c_1p8>; > + vdd-l17-supply = <&vreg_bob2>; > + > + vreg_bob1: bob1 { > + regulator-name = "vreg_bob1"; > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob2: bob2 { > + regulator-name = "vreg_bob2"; > + regulator-min-microvolt = <2504000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2b_3p0: ldo2 { > + regulator-name = "vreg_l2b_3p0"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l4b_1p8: ldo4 { > + regulator-name = "vreg_l4b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6b_1p8: ldo6 { > + regulator-name = "vreg_l6b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8b_3p0: ldo8 { > + regulator-name = "vreg_l8b_3p0"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9b_2p9: ldo9 { > + regulator-name = "vreg_l9b_2p9"; > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12b_1p2: ldo12 { > + regulator-name = "vreg_l12b_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13b_3p0: ldo13 { > + regulator-name = "vreg_l13b_3p0"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l14b_3p0: ldo14 { > + regulator-name = "vreg_l14b_3p0"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l15b_1p8: ldo15 { > + regulator-name = "vreg_l15b_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l17b_2p5: ldo17 { > + regulator-name = "vreg_l17b_2p5"; > + regulator-min-microvolt = <2504000>; > + regulator-max-microvolt = <2504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-1 { > + compatible = "qcom,pm8550ve-rpmh-regulators"; > + qcom,pmic-id = "c"; > + vdd-l1-supply = <&vreg_s5j_1p2>; > + vdd-l2-supply = <&vreg_s1f_0p7>; > + vdd-l3-supply = <&vreg_s1f_0p7>; > + > + vreg_s4c_1p8: smps4 { > + regulator-name = "vreg_s4c_1p8"; > + regulator-min-microvolt = <1856000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1c_1p2: ldo1 { > + regulator-name = "vreg_l1c_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2c_0p8: ldo2 { > + regulator-name = "vreg_l2c_0p8"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3c_0p9: ldo3 { > + regulator-name = "vreg_l3c_0p9"; > + regulator-min-microvolt = <920000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-2 { > + compatible = "qcom,pmc8380-rpmh-regulators"; > + qcom,pmic-id = "d"; > + vdd-l1-supply = <&vreg_s1f_0p7>; > + vdd-l2-supply = <&vreg_s1f_0p7>; > + vdd-l3-supply = <&vreg_s4c_1p8>; > + vdd-s1-supply = <&vph_pwr>; > + > + vreg_l1d_0p8: ldo1 { > + regulator-name = "vreg_l1d_0p8"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2d_0p9: ldo2 { > + regulator-name = "vreg_l2d_0p9"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3d_1p8: ldo3 { > + regulator-name = "vreg_l3d_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-3 { > + compatible = "qcom,pmc8380-rpmh-regulators"; > + qcom,pmic-id = "e"; > + vdd-l2-supply = <&vreg_s1f_0p7>; > + vdd-l3-supply = <&vreg_s5j_1p2>; > + > + vreg_l2e_0p8: ldo2 { > + regulator-name = "vreg_l2e_0p8"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3e_1p2: ldo3 { > + regulator-name = "vreg_l3e_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-4 { > + compatible = "qcom,pmc8380-rpmh-regulators"; > + qcom,pmic-id = "f"; > + vdd-l1-supply = <&vreg_s5j_1p2>; > + vdd-l2-supply = <&vreg_s5j_1p2>; > + vdd-l3-supply = <&vreg_s5j_1p2>; > + vdd-s1-supply = <&vph_pwr>; > + > + vreg_s1f_0p7: smps1 { > + regulator-name = "vreg_s1f_0p7"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1100000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-6 { > + compatible = "qcom,pm8550ve-rpmh-regulators"; > + qcom,pmic-id = "i"; > + vdd-l1-supply = <&vreg_s4c_1p8>; > + vdd-l2-supply = <&vreg_s5j_1p2>; > + vdd-l3-supply = <&vreg_s1f_0p7>; > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + > + vreg_s1i_0p9: smps1 { > + regulator-name = "vreg_s1i_0p9"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s2i_1p0: smps2 { > + regulator-name = "vreg_s2i_1p0"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1100000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1i_1p8: ldo1 { > + regulator-name = "vreg_l1i_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2i_1p2: ldo2 { > + regulator-name = "vreg_l2i_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3i_0p8: ldo3 { > + regulator-name = "vreg_l3i_0p8"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-7 { > + compatible = "qcom,pm8550ve-rpmh-regulators"; > + qcom,pmic-id = "j"; > + vdd-l1-supply = <&vreg_s1f_0p7>; > + vdd-l2-supply = <&vreg_s5j_1p2>; > + vdd-l3-supply = <&vreg_s1f_0p7>; > + vdd-s5-supply = <&vph_pwr>; > + > + vreg_s5j_1p2: smps5 { > + regulator-name = "vreg_s5j_1p2"; > + regulator-min-microvolt = <1256000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1j_0p9: ldo1 { > + regulator-name = "vreg_l1j_0p9"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2j_1p2: ldo2 { > + regulator-name = "vreg_l2j_1p2"; > + regulator-min-microvolt = <1256000>; > + regulator-max-microvolt = <1256000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3j_0p8: ldo3 { > + regulator-name = "vreg_l3j_0p8"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&pcie4 { > + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; > + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; > + > + pinctrl-0 = <&pcie4_default>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > +&pcie4_phy { > + vdda-phy-supply = <&vreg_l3i_0p8>; > + vdda-pll-supply = <&vreg_l3e_1p2>; > + > + status = "okay"; > +}; > + > +&pcie6a { > + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; > + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; > + > + vddpe-3v3-supply = <&vreg_nvme>; > + > + pinctrl-0 = <&pcie6a_default>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > +&pcie6a_phy { > + vdda-phy-supply = <&vreg_l1d_0p8>; > + vdda-pll-supply = <&vreg_l2j_1p2>; > + > + status = "okay"; > +}; > + > +&qupv3_0 { > + status = "okay"; > +}; > + > +&qupv3_1 { > + status = "okay"; > +}; > + > +&qupv3_2 { > + status = "okay"; > +}; > + > +&remoteproc_adsp { > + firmware-name = "qcom/x1e80100/dell/tributo/qcadsp8380.mbn", > + "qcom/x1e80100/dell/tributo/adsp_dtbs.elf"; > + > + status = "okay"; > +}; > + > +&remoteproc_cdsp { > + firmware-name = "qcom/x1e80100/dell/tributo/qccdsp8380.mbn", > + "qcom/x1e80100/dell/tributo/cdsp_dtbs.elf"; > + > + status = "okay"; > +}; > + > +&gpu { > + status = "okay"; > + > + zap-shader { > + firmware-name = "qcom/x1e80100/dell/tributo/qcdxkmsuc8380.mbn"; > + }; > +}; > + > +&mdss { > + status = "okay"; > +}; > + > +&mdss_dp3 { > + compatible = "qcom,x1e80100-dp"; > + /delete-property/ #sound-dai-cells; > + > + status = "okay"; > + > + aux-bus { > + panel { > + /* 1920x1200 IPS panel is SHP1593, PNP09FF compatible */ > + compatible = "edp-panel"; > + power-supply = <&vreg_edp_3p3>; > + > + port { > + edp_panel_in: endpoint { > + remote-endpoint = <&mdss_dp3_out>; > + }; > + }; > + }; > + }; > + > + ports { > + port@1 { > + reg = <1>; > + > + mdss_dp3_out: endpoint { > + data-lanes = <0 1 2 3>; > + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; > + > + remote-endpoint = <&edp_panel_in>; > + }; > + }; > + }; > +}; > + > +&mdss_dp3_phy { > + vdda-phy-supply = <&vreg_l3j_0p8>; > + vdda-pll-supply = <&vreg_l2j_1p2>; > + > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + status = "okay"; > + > + keyboard@5 { > + compatible = "hid-over-i2c"; > + reg = <0x5>; > + > + hid-descr-addr = <0x20>; > + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; > + > + pinctrl-0 = <&kybd_default>; > + pinctrl-names = "default"; > + > + wakeup-source; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + status = "disabled"; > + /* PS8830 Retimer @0x8 */ > + /* Unknown device @0x9 */ > +}; > + > +&i2c5 { > + clock-frequency = <100000>; > + status = "disabled"; > + /* Unknown device @0x3b */ > +}; > + > +&i2c7 { > + clock-frequency = <400000>; > + status = "disabled"; > + /* PS8830 Retimer @0x8 */ > + /* Unknown device @0x9 */ > +}; > + > +&i2c8 { > + clock-frequency = <400000>; > + > + status = "okay"; > + > + touchscreen@0 { > + compatible = "hid-over-i2c"; > + reg = <0x0>; > + > + hid-descr-addr = <0x1>; > + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; > + > + pinctrl-0 = <&ts0_default>; > + pinctrl-names = "default"; > + }; > +}; > + > +&i2c9 { > + clock-frequency = <400000>; > + status = "disabled"; > + /* USB3 retimer device @0x4f */ > +}; > + > +&i2c17 { > + clock-frequency = <400000>; > + status = "okay"; > + > + touchpad@2c { > + compatible = "hid-over-i2c"; > + reg = <0x2c>; > + > + hid-descr-addr = <0x20>; > + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; > + > + pinctrl-0 = <&tpad_default>; > + pinctrl-names = "default"; > + > + wakeup-source; > + }; > +}; > + > +&smb2360_0_eusb2_repeater { > + vdd18-supply = <&vreg_l3d_1p8>; > + vdd3-supply = <&vreg_l2b_3p0>; > +}; > + > +&smb2360_1_eusb2_repeater { > + vdd18-supply = <&vreg_l3d_1p8>; > + vdd3-supply = <&vreg_l14b_3p0>; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <44 4>, /* SPI11 (TPM) */ > + <76 4>, /* SPI19 (TZ Protected) */ > + <238 1>; /* UFS Reset */ > + > + edp_reg_en: edp-reg-en-state { > + pins = "gpio70"; > + function = "gpio"; > + drive-strength = <16>; > + bias-disable; > + }; > + > + kybd_default: kybd-default-state { > + pins = "gpio67"; > + function = "gpio"; > + bias-pull-up; > + }; > + > + nvme_reg_en: nvme-reg-en-state { > + pins = "gpio18"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + tpad_default: tpad-default-state { > + disable-pins { > + pins = "gpio38"; > + function = "gpio"; > + output-high; > + }; > + > + int-n-pins { > + pins = "gpio3"; > + function = "gpio"; > + bias-pull-up; > + }; > + > + reset-n-pins { > + pins = "gpio52"; > + function = "gpio"; > + bias-disable; > + }; > + }; > + > + ts0_default: ts0-default-state { > + disable-pins { > + pins = "gpio75"; > + function = "gpio"; > + output-high; > + }; > + > + int-n-pins { > + pins = "gpio51"; > + function = "gpio"; > + bias-pull-up; > + }; > + > + reset-n-pins { > + /* Technically should be High-Z input */ > + pins = "gpio48"; > + function = "gpio"; > + output-low; > + drive-strength = <2>; > + }; > + }; > + > + hall_int_n_default: hall-int-n-state { > + pins = "gpio92"; > + function = "gpio"; > + > + bias-disable; > + }; > + > + pcie4_default: pcie4-default-state { > + clkreq-n-pins { > + pins = "gpio147"; > + function = "pcie4_clk"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + perst-n-pins { > + pins = "gpio146"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + wake-n-pins { > + pins = "gpio148"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + }; > + > + pcie6a_default: pcie6a-default-state { > + clkreq-n-pins { > + pins = "gpio153"; > + function = "pcie6a_clk"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + perst-n-pins { > + pins = "gpio152"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + wake-n-pins { > + pins = "gpio154"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + }; > + > + cam_indicator_en: cam-indicator-en-state { > + pins = "gpio110"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > +}; > + > +&uart21 { > + compatible = "qcom,geni-debug-uart"; > + status = "okay"; > +}; > + > +&usb_1_ss0_hsphy { > + vdd-supply = <&vreg_l3j_0p8>; > + vdda12-supply = <&vreg_l2j_1p2>; > + > + phys = <&smb2360_0_eusb2_repeater>; > + > + status = "okay"; > +}; > + > +&usb_1_ss0_qmpphy { > + vdda-phy-supply = <&vreg_l3e_1p2>; > + vdda-pll-supply = <&vreg_l1j_0p9>; > + > + status = "okay"; > +}; > + > +&usb_1_ss0 { > + status = "okay"; > +}; > + > +&usb_1_ss0_dwc3 { > + dr_mode = "host"; > +}; > + > +&usb_1_ss0_dwc3_hs { > + remote-endpoint = <&pmic_glink_ss0_hs_in>; > +}; > + > +&usb_1_ss0_qmpphy_out { > + remote-endpoint = <&pmic_glink_ss0_ss_in>; > +}; > + > +&usb_1_ss1_hsphy { > + vdd-supply = <&vreg_l3j_0p8>; > + vdda12-supply = <&vreg_l2j_1p2>; > + > + phys = <&smb2360_1_eusb2_repeater>; > + > + status = "okay"; > +}; > + > +&usb_1_ss1_qmpphy { > + vdda-phy-supply = <&vreg_l3e_1p2>; > + vdda-pll-supply = <&vreg_l2d_0p9>; > + > + status = "okay"; > +}; > + > +&usb_1_ss1 { > + status = "okay"; > +}; > + > +&usb_1_ss1_dwc3 { > + dr_mode = "host"; > +}; > + > +&usb_1_ss1_dwc3_hs { > + remote-endpoint = <&pmic_glink_ss1_hs_in>; > +}; > + > +&usb_1_ss1_qmpphy_out { > + remote-endpoint = <&pmic_glink_ss1_ss_in>; > +}; > -- > 2.43.0 > >
On Sat, 21 Sept 2024 at 00:25, Rob Clark <robdclark@gmail.com> wrote: > > On Thu, Sep 19, 2024 at 10:01 AM Aleksandrs Vinarskis > <alex.vinarskis@gmail.com> wrote: > > > > Initial support for Dell XPS 9345 13" 2024 (Tributo) based on X1E80100. > > > > Working: > > * Touchpad > > * Keyboard (only post suspend&resume, i2c-hid patch WIP) > > * eDP, with brightness control > > * NVME > > * USB Type-C ports in USB2/USB3 (one orientation) > > * WiFi > > * GPU/aDSP/cDSP firmware loading (requires binaries from Windows) > > * Lid switch > > * Sleep/suspend, nothing visibly broken on resume > > > > Not working: > > * Speakers (WIP, pin guessing, x4 WSA8845) > > * Microphones (WIP, pin guessing) > > * Fingerprint Reader (WIP, USB MP with ptn3222) > > * USB as DP/USB3 (WIP, PS8830 based) > > * Camera > > * Battery Info > > > > Should be working, but cannot be tested due to lack of hw: > > * Higher res OLED, higher res IPS panels > > My suspicion is that OLED vs IPS will require different dtb. I'm > expecting the OLED to use samsung,atna33xc20 panel driver (see "arm64: > dts: qcom: x1e80100-yoga: Update panel bindings"), but IPS can > probably use edp-panel. I'm not sure if anyone has gotten both panels > working on any other device that has both IPS and OLED variants, so > this remains a theory. The t14s, which also has both IPS and OLED, > has different DMI/CHID values for the different SKUs, so DtbLoader > should be able to pick the correct dtb, once it exists. Thanks for the input. Will take a look at that driver. I have briefly looked into .inf from Dell's Windows driver trying to identify them - all three panels have dell-specific model naming, which unfortunately does not help much. As far as I found from unofficial sources (1), the particular OLED is LG made, not Samsung. Luckily, Peter de Kraker (CCed) has reached out to me yesterday as he got an OLED variant - will test on his machine in the following weeks, as well as record CHIDs once he is able to boot with a working display. Sounds rather unscalable though if each variant of laptop would need a separate dtb? Eg. Dell's Inspiron model supports both x1e80 and x1e78 (luckily no OLEDs though). If some OEM would release a model with both displays and SoCs customizable, the number of variants would grow pretty fast... [1] https://www.thelec.net/news/articleView.html?idxno=4858 Alex > > BR, > -R > > > * Touchscreen > > > > Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> > > --- > > arch/arm64/boot/dts/qcom/Makefile | 1 + > > .../dts/qcom/x1e80100-dell-tributo-13.dts | 860 ++++++++++++++++++ > > 2 files changed, 861 insertions(+) > > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts > > > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > > index ae002c7cf126..111c589d6bae 100644 > > --- a/arch/arm64/boot/dts/qcom/Makefile > > +++ b/arch/arm64/boot/dts/qcom/Makefile > > @@ -271,6 +271,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb > > dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb > > +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-tributo-13.dtb > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts > > new file mode 100644 > > index 000000000000..d387f133c398 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts > > @@ -0,0 +1,860 @@ > > +// SPDX-License-Identifier: BSD-3-Clause > > +/* > > + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. > > + * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@gmail.com> > > + */ > > + > > +/dts-v1/; > > + > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/input/gpio-keys.h> > > +#include <dt-bindings/input/input.h> > > +#include <dt-bindings/leds/common.h> > > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > > + > > +#include "x1e80100.dtsi" > > +#include "x1e80100-pmics.dtsi" > > + > > +/ { > > + model = "Dell XPS 13 9345"; > > + compatible = "dell,tributo-13", "qcom,x1e80100"; > > + chassis-type = "laptop"; > > + > > + gpio-keys { > > + compatible = "gpio-keys"; > > + > > + pinctrl-0 = <&hall_int_n_default>; > > + pinctrl-names = "default"; > > + > > + switch-lid { > > + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; > > + linux,input-type = <EV_SW>; > > + linux,code = <SW_LID>; > > + wakeup-source; > > + wakeup-event-action = <EV_ACT_DEASSERTED>; > > + }; > > + }; > > + > > + leds { > > + compatible = "gpio-leds"; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&cam_indicator_en>; > > + > > + led-camera-indicator { > > + label = "white:camera-indicator"; > > + function = LED_FUNCTION_INDICATOR; > > + color = <LED_COLOR_ID_WHITE>; > > + gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; > > + linux,default-trigger = "none"; > > + default-state = "off"; > > + /* Reuse as a panic indicator until we get a "camera on" trigger */ > > + panic-indicator; > > + }; > > + }; > > + > > + pmic-glink { > > + compatible = "qcom,x1e80100-pmic-glink", > > + "qcom,sm8550-pmic-glink", > > + "qcom,pmic-glink"; > > + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, > > + <&tlmm 123 GPIO_ACTIVE_HIGH>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + /* Right-side USB Type-C port */ > > + connector@0 { > > + compatible = "usb-c-connector"; > > + reg = <0>; > > + power-role = "dual"; > > + data-role = "dual"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + > > + pmic_glink_ss0_hs_in: endpoint { > > + remote-endpoint = <&usb_1_ss0_dwc3_hs>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + > > + pmic_glink_ss0_ss_in: endpoint { > > + remote-endpoint = <&usb_1_ss0_qmpphy_out>; > > + }; > > + }; > > + }; > > + }; > > + > > + /* Left-side USB Type-C port */ > > + connector@1 { > > + compatible = "usb-c-connector"; > > + reg = <1>; > > + power-role = "dual"; > > + data-role = "dual"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + > > + pmic_glink_ss1_hs_in: endpoint { > > + remote-endpoint = <&usb_1_ss1_dwc3_hs>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + > > + pmic_glink_ss1_ss_in: endpoint { > > + remote-endpoint = <&usb_1_ss1_qmpphy_out>; > > + }; > > + }; > > + }; > > + }; > > + }; > > + > > + reserved-memory { > > + linux,cma { > > + compatible = "shared-dma-pool"; > > + size = <0x0 0x8000000>; > > + reusable; > > + linux,cma-default; > > + }; > > + }; > > + > > + vph_pwr: vph-pwr-regulator { > > + compatible = "regulator-fixed"; > > + > > + regulator-name = "vph_pwr"; > > + regulator-min-microvolt = <3700000>; > > + regulator-max-microvolt = <3700000>; > > + > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + vreg_edp_3p3: regulator-edp-3p3 { > > + compatible = "regulator-fixed"; > > + > > + regulator-name = "VREG_EDP_3P3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + > > + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + > > + pinctrl-0 = <&edp_reg_en>; > > + pinctrl-names = "default"; > > + > > + regulator-boot-on; > > + }; > > + > > + vreg_nvme: regulator-nvme { > > + compatible = "regulator-fixed"; > > + > > + regulator-name = "VREG_NVME_3P3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + > > + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + > > + pinctrl-0 = <&nvme_reg_en>; > > + pinctrl-names = "default"; > > + }; > > +}; > > + > > +&apps_rsc { > > + regulators-0 { > > + compatible = "qcom,pm8550-rpmh-regulators"; > > + qcom,pmic-id = "b"; > > + vdd-bob1-supply = <&vph_pwr>; > > + vdd-bob2-supply = <&vph_pwr>; > > + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; > > + vdd-l2-l13-l14-supply = <&vreg_bob1>; > > + vdd-l5-l16-supply = <&vreg_bob1>; > > + vdd-l6-l7-supply = <&vreg_bob2>; > > + vdd-l8-l9-supply = <&vreg_bob1>; > > + vdd-l12-supply = <&vreg_s5j_1p2>; > > + vdd-l15-supply = <&vreg_s4c_1p8>; > > + vdd-l17-supply = <&vreg_bob2>; > > + > > + vreg_bob1: bob1 { > > + regulator-name = "vreg_bob1"; > > + regulator-min-microvolt = <3008000>; > > + regulator-max-microvolt = <3960000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_bob2: bob2 { > > + regulator-name = "vreg_bob2"; > > + regulator-min-microvolt = <2504000>; > > + regulator-max-microvolt = <3008000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l2b_3p0: ldo2 { > > + regulator-name = "vreg_l2b_3p0"; > > + regulator-min-microvolt = <3072000>; > > + regulator-max-microvolt = <3072000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l4b_1p8: ldo4 { > > + regulator-name = "vreg_l4b_1p8"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l6b_1p8: ldo6 { > > + regulator-name = "vreg_l6b_1p8"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <2960000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l8b_3p0: ldo8 { > > + regulator-name = "vreg_l8b_3p0"; > > + regulator-min-microvolt = <3072000>; > > + regulator-max-microvolt = <3072000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l9b_2p9: ldo9 { > > + regulator-name = "vreg_l9b_2p9"; > > + regulator-min-microvolt = <2960000>; > > + regulator-max-microvolt = <2960000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l12b_1p2: ldo12 { > > + regulator-name = "vreg_l12b_1p2"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l13b_3p0: ldo13 { > > + regulator-name = "vreg_l13b_3p0"; > > + regulator-min-microvolt = <3072000>; > > + regulator-max-microvolt = <3072000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l14b_3p0: ldo14 { > > + regulator-name = "vreg_l14b_3p0"; > > + regulator-min-microvolt = <3072000>; > > + regulator-max-microvolt = <3072000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l15b_1p8: ldo15 { > > + regulator-name = "vreg_l15b_1p8"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l17b_2p5: ldo17 { > > + regulator-name = "vreg_l17b_2p5"; > > + regulator-min-microvolt = <2504000>; > > + regulator-max-microvolt = <2504000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + }; > > + > > + regulators-1 { > > + compatible = "qcom,pm8550ve-rpmh-regulators"; > > + qcom,pmic-id = "c"; > > + vdd-l1-supply = <&vreg_s5j_1p2>; > > + vdd-l2-supply = <&vreg_s1f_0p7>; > > + vdd-l3-supply = <&vreg_s1f_0p7>; > > + > > + vreg_s4c_1p8: smps4 { > > + regulator-name = "vreg_s4c_1p8"; > > + regulator-min-microvolt = <1856000>; > > + regulator-max-microvolt = <2000000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l1c_1p2: ldo1 { > > + regulator-name = "vreg_l1c_1p2"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l2c_0p8: ldo2 { > > + regulator-name = "vreg_l2c_0p8"; > > + regulator-min-microvolt = <880000>; > > + regulator-max-microvolt = <880000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l3c_0p9: ldo3 { > > + regulator-name = "vreg_l3c_0p9"; > > + regulator-min-microvolt = <920000>; > > + regulator-max-microvolt = <920000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + }; > > + > > + regulators-2 { > > + compatible = "qcom,pmc8380-rpmh-regulators"; > > + qcom,pmic-id = "d"; > > + vdd-l1-supply = <&vreg_s1f_0p7>; > > + vdd-l2-supply = <&vreg_s1f_0p7>; > > + vdd-l3-supply = <&vreg_s4c_1p8>; > > + vdd-s1-supply = <&vph_pwr>; > > + > > + vreg_l1d_0p8: ldo1 { > > + regulator-name = "vreg_l1d_0p8"; > > + regulator-min-microvolt = <880000>; > > + regulator-max-microvolt = <880000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l2d_0p9: ldo2 { > > + regulator-name = "vreg_l2d_0p9"; > > + regulator-min-microvolt = <912000>; > > + regulator-max-microvolt = <912000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l3d_1p8: ldo3 { > > + regulator-name = "vreg_l3d_1p8"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + }; > > + > > + regulators-3 { > > + compatible = "qcom,pmc8380-rpmh-regulators"; > > + qcom,pmic-id = "e"; > > + vdd-l2-supply = <&vreg_s1f_0p7>; > > + vdd-l3-supply = <&vreg_s5j_1p2>; > > + > > + vreg_l2e_0p8: ldo2 { > > + regulator-name = "vreg_l2e_0p8"; > > + regulator-min-microvolt = <880000>; > > + regulator-max-microvolt = <880000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l3e_1p2: ldo3 { > > + regulator-name = "vreg_l3e_1p2"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + }; > > + > > + regulators-4 { > > + compatible = "qcom,pmc8380-rpmh-regulators"; > > + qcom,pmic-id = "f"; > > + vdd-l1-supply = <&vreg_s5j_1p2>; > > + vdd-l2-supply = <&vreg_s5j_1p2>; > > + vdd-l3-supply = <&vreg_s5j_1p2>; > > + vdd-s1-supply = <&vph_pwr>; > > + > > + vreg_s1f_0p7: smps1 { > > + regulator-name = "vreg_s1f_0p7"; > > + regulator-min-microvolt = <700000>; > > + regulator-max-microvolt = <1100000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + }; > > + > > + regulators-6 { > > + compatible = "qcom,pm8550ve-rpmh-regulators"; > > + qcom,pmic-id = "i"; > > + vdd-l1-supply = <&vreg_s4c_1p8>; > > + vdd-l2-supply = <&vreg_s5j_1p2>; > > + vdd-l3-supply = <&vreg_s1f_0p7>; > > + vdd-s1-supply = <&vph_pwr>; > > + vdd-s2-supply = <&vph_pwr>; > > + > > + vreg_s1i_0p9: smps1 { > > + regulator-name = "vreg_s1i_0p9"; > > + regulator-min-microvolt = <900000>; > > + regulator-max-microvolt = <920000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_s2i_1p0: smps2 { > > + regulator-name = "vreg_s2i_1p0"; > > + regulator-min-microvolt = <1000000>; > > + regulator-max-microvolt = <1100000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l1i_1p8: ldo1 { > > + regulator-name = "vreg_l1i_1p8"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l2i_1p2: ldo2 { > > + regulator-name = "vreg_l2i_1p2"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l3i_0p8: ldo3 { > > + regulator-name = "vreg_l3i_0p8"; > > + regulator-min-microvolt = <880000>; > > + regulator-max-microvolt = <880000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + }; > > + > > + regulators-7 { > > + compatible = "qcom,pm8550ve-rpmh-regulators"; > > + qcom,pmic-id = "j"; > > + vdd-l1-supply = <&vreg_s1f_0p7>; > > + vdd-l2-supply = <&vreg_s5j_1p2>; > > + vdd-l3-supply = <&vreg_s1f_0p7>; > > + vdd-s5-supply = <&vph_pwr>; > > + > > + vreg_s5j_1p2: smps5 { > > + regulator-name = "vreg_s5j_1p2"; > > + regulator-min-microvolt = <1256000>; > > + regulator-max-microvolt = <1304000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l1j_0p9: ldo1 { > > + regulator-name = "vreg_l1j_0p9"; > > + regulator-min-microvolt = <912000>; > > + regulator-max-microvolt = <912000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l2j_1p2: ldo2 { > > + regulator-name = "vreg_l2j_1p2"; > > + regulator-min-microvolt = <1256000>; > > + regulator-max-microvolt = <1256000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l3j_0p8: ldo3 { > > + regulator-name = "vreg_l3j_0p8"; > > + regulator-min-microvolt = <880000>; > > + regulator-max-microvolt = <880000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + }; > > +}; > > + > > +&pcie4 { > > + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; > > + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; > > + > > + pinctrl-0 = <&pcie4_default>; > > + pinctrl-names = "default"; > > + > > + status = "okay"; > > +}; > > + > > +&pcie4_phy { > > + vdda-phy-supply = <&vreg_l3i_0p8>; > > + vdda-pll-supply = <&vreg_l3e_1p2>; > > + > > + status = "okay"; > > +}; > > + > > +&pcie6a { > > + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; > > + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; > > + > > + vddpe-3v3-supply = <&vreg_nvme>; > > + > > + pinctrl-0 = <&pcie6a_default>; > > + pinctrl-names = "default"; > > + > > + status = "okay"; > > +}; > > + > > +&pcie6a_phy { > > + vdda-phy-supply = <&vreg_l1d_0p8>; > > + vdda-pll-supply = <&vreg_l2j_1p2>; > > + > > + status = "okay"; > > +}; > > + > > +&qupv3_0 { > > + status = "okay"; > > +}; > > + > > +&qupv3_1 { > > + status = "okay"; > > +}; > > + > > +&qupv3_2 { > > + status = "okay"; > > +}; > > + > > +&remoteproc_adsp { > > + firmware-name = "qcom/x1e80100/dell/tributo/qcadsp8380.mbn", > > + "qcom/x1e80100/dell/tributo/adsp_dtbs.elf"; > > + > > + status = "okay"; > > +}; > > + > > +&remoteproc_cdsp { > > + firmware-name = "qcom/x1e80100/dell/tributo/qccdsp8380.mbn", > > + "qcom/x1e80100/dell/tributo/cdsp_dtbs.elf"; > > + > > + status = "okay"; > > +}; > > + > > +&gpu { > > + status = "okay"; > > + > > + zap-shader { > > + firmware-name = "qcom/x1e80100/dell/tributo/qcdxkmsuc8380.mbn"; > > + }; > > +}; > > + > > +&mdss { > > + status = "okay"; > > +}; > > + > > +&mdss_dp3 { > > + compatible = "qcom,x1e80100-dp"; > > + /delete-property/ #sound-dai-cells; > > + > > + status = "okay"; > > + > > + aux-bus { > > + panel { > > + /* 1920x1200 IPS panel is SHP1593, PNP09FF compatible */ > > + compatible = "edp-panel"; > > + power-supply = <&vreg_edp_3p3>; > > + > > + port { > > + edp_panel_in: endpoint { > > + remote-endpoint = <&mdss_dp3_out>; > > + }; > > + }; > > + }; > > + }; > > + > > + ports { > > + port@1 { > > + reg = <1>; > > + > > + mdss_dp3_out: endpoint { > > + data-lanes = <0 1 2 3>; > > + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; > > + > > + remote-endpoint = <&edp_panel_in>; > > + }; > > + }; > > + }; > > +}; > > + > > +&mdss_dp3_phy { > > + vdda-phy-supply = <&vreg_l3j_0p8>; > > + vdda-pll-supply = <&vreg_l2j_1p2>; > > + > > + status = "okay"; > > +}; > > + > > +&i2c0 { > > + clock-frequency = <400000>; > > + status = "okay"; > > + > > + keyboard@5 { > > + compatible = "hid-over-i2c"; > > + reg = <0x5>; > > + > > + hid-descr-addr = <0x20>; > > + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; > > + > > + pinctrl-0 = <&kybd_default>; > > + pinctrl-names = "default"; > > + > > + wakeup-source; > > + }; > > +}; > > + > > +&i2c3 { > > + clock-frequency = <400000>; > > + status = "disabled"; > > + /* PS8830 Retimer @0x8 */ > > + /* Unknown device @0x9 */ > > +}; > > + > > +&i2c5 { > > + clock-frequency = <100000>; > > + status = "disabled"; > > + /* Unknown device @0x3b */ > > +}; > > + > > +&i2c7 { > > + clock-frequency = <400000>; > > + status = "disabled"; > > + /* PS8830 Retimer @0x8 */ > > + /* Unknown device @0x9 */ > > +}; > > + > > +&i2c8 { > > + clock-frequency = <400000>; > > + > > + status = "okay"; > > + > > + touchscreen@0 { > > + compatible = "hid-over-i2c"; > > + reg = <0x0>; > > + > > + hid-descr-addr = <0x1>; > > + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; > > + > > + pinctrl-0 = <&ts0_default>; > > + pinctrl-names = "default"; > > + }; > > +}; > > + > > +&i2c9 { > > + clock-frequency = <400000>; > > + status = "disabled"; > > + /* USB3 retimer device @0x4f */ > > +}; > > + > > +&i2c17 { > > + clock-frequency = <400000>; > > + status = "okay"; > > + > > + touchpad@2c { > > + compatible = "hid-over-i2c"; > > + reg = <0x2c>; > > + > > + hid-descr-addr = <0x20>; > > + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; > > + > > + pinctrl-0 = <&tpad_default>; > > + pinctrl-names = "default"; > > + > > + wakeup-source; > > + }; > > +}; > > + > > +&smb2360_0_eusb2_repeater { > > + vdd18-supply = <&vreg_l3d_1p8>; > > + vdd3-supply = <&vreg_l2b_3p0>; > > +}; > > + > > +&smb2360_1_eusb2_repeater { > > + vdd18-supply = <&vreg_l3d_1p8>; > > + vdd3-supply = <&vreg_l14b_3p0>; > > +}; > > + > > +&tlmm { > > + gpio-reserved-ranges = <44 4>, /* SPI11 (TPM) */ > > + <76 4>, /* SPI19 (TZ Protected) */ > > + <238 1>; /* UFS Reset */ > > + > > + edp_reg_en: edp-reg-en-state { > > + pins = "gpio70"; > > + function = "gpio"; > > + drive-strength = <16>; > > + bias-disable; > > + }; > > + > > + kybd_default: kybd-default-state { > > + pins = "gpio67"; > > + function = "gpio"; > > + bias-pull-up; > > + }; > > + > > + nvme_reg_en: nvme-reg-en-state { > > + pins = "gpio18"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-disable; > > + }; > > + > > + tpad_default: tpad-default-state { > > + disable-pins { > > + pins = "gpio38"; > > + function = "gpio"; > > + output-high; > > + }; > > + > > + int-n-pins { > > + pins = "gpio3"; > > + function = "gpio"; > > + bias-pull-up; > > + }; > > + > > + reset-n-pins { > > + pins = "gpio52"; > > + function = "gpio"; > > + bias-disable; > > + }; > > + }; > > + > > + ts0_default: ts0-default-state { > > + disable-pins { > > + pins = "gpio75"; > > + function = "gpio"; > > + output-high; > > + }; > > + > > + int-n-pins { > > + pins = "gpio51"; > > + function = "gpio"; > > + bias-pull-up; > > + }; > > + > > + reset-n-pins { > > + /* Technically should be High-Z input */ > > + pins = "gpio48"; > > + function = "gpio"; > > + output-low; > > + drive-strength = <2>; > > + }; > > + }; > > + > > + hall_int_n_default: hall-int-n-state { > > + pins = "gpio92"; > > + function = "gpio"; > > + > > + bias-disable; > > + }; > > + > > + pcie4_default: pcie4-default-state { > > + clkreq-n-pins { > > + pins = "gpio147"; > > + function = "pcie4_clk"; > > + drive-strength = <2>; > > + bias-pull-up; > > + }; > > + > > + perst-n-pins { > > + pins = "gpio146"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-disable; > > + }; > > + > > + wake-n-pins { > > + pins = "gpio148"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-pull-up; > > + }; > > + }; > > + > > + pcie6a_default: pcie6a-default-state { > > + clkreq-n-pins { > > + pins = "gpio153"; > > + function = "pcie6a_clk"; > > + drive-strength = <2>; > > + bias-pull-up; > > + }; > > + > > + perst-n-pins { > > + pins = "gpio152"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-disable; > > + }; > > + > > + wake-n-pins { > > + pins = "gpio154"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-pull-up; > > + }; > > + }; > > + > > + cam_indicator_en: cam-indicator-en-state { > > + pins = "gpio110"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-disable; > > + }; > > +}; > > + > > +&uart21 { > > + compatible = "qcom,geni-debug-uart"; > > + status = "okay"; > > +}; > > + > > +&usb_1_ss0_hsphy { > > + vdd-supply = <&vreg_l3j_0p8>; > > + vdda12-supply = <&vreg_l2j_1p2>; > > + > > + phys = <&smb2360_0_eusb2_repeater>; > > + > > + status = "okay"; > > +}; > > + > > +&usb_1_ss0_qmpphy { > > + vdda-phy-supply = <&vreg_l3e_1p2>; > > + vdda-pll-supply = <&vreg_l1j_0p9>; > > + > > + status = "okay"; > > +}; > > + > > +&usb_1_ss0 { > > + status = "okay"; > > +}; > > + > > +&usb_1_ss0_dwc3 { > > + dr_mode = "host"; > > +}; > > + > > +&usb_1_ss0_dwc3_hs { > > + remote-endpoint = <&pmic_glink_ss0_hs_in>; > > +}; > > + > > +&usb_1_ss0_qmpphy_out { > > + remote-endpoint = <&pmic_glink_ss0_ss_in>; > > +}; > > + > > +&usb_1_ss1_hsphy { > > + vdd-supply = <&vreg_l3j_0p8>; > > + vdda12-supply = <&vreg_l2j_1p2>; > > + > > + phys = <&smb2360_1_eusb2_repeater>; > > + > > + status = "okay"; > > +}; > > + > > +&usb_1_ss1_qmpphy { > > + vdda-phy-supply = <&vreg_l3e_1p2>; > > + vdda-pll-supply = <&vreg_l2d_0p9>; > > + > > + status = "okay"; > > +}; > > + > > +&usb_1_ss1 { > > + status = "okay"; > > +}; > > + > > +&usb_1_ss1_dwc3 { > > + dr_mode = "host"; > > +}; > > + > > +&usb_1_ss1_dwc3_hs { > > + remote-endpoint = <&pmic_glink_ss1_hs_in>; > > +}; > > + > > +&usb_1_ss1_qmpphy_out { > > + remote-endpoint = <&pmic_glink_ss1_ss_in>; > > +}; > > -- > > 2.43.0 > > > >
On Sat, Sep 21, 2024 at 5:16 AM alex vinarskis <alex.vinarskis@gmail.com> wrote: > > On Sat, 21 Sept 2024 at 00:25, Rob Clark <robdclark@gmail.com> wrote: > > > > On Thu, Sep 19, 2024 at 10:01 AM Aleksandrs Vinarskis > > <alex.vinarskis@gmail.com> wrote: > > > > > > Initial support for Dell XPS 9345 13" 2024 (Tributo) based on X1E80100. > > > > > > Working: > > > * Touchpad > > > * Keyboard (only post suspend&resume, i2c-hid patch WIP) > > > * eDP, with brightness control > > > * NVME > > > * USB Type-C ports in USB2/USB3 (one orientation) > > > * WiFi > > > * GPU/aDSP/cDSP firmware loading (requires binaries from Windows) > > > * Lid switch > > > * Sleep/suspend, nothing visibly broken on resume > > > > > > Not working: > > > * Speakers (WIP, pin guessing, x4 WSA8845) > > > * Microphones (WIP, pin guessing) > > > * Fingerprint Reader (WIP, USB MP with ptn3222) > > > * USB as DP/USB3 (WIP, PS8830 based) > > > * Camera > > > * Battery Info > > > > > > Should be working, but cannot be tested due to lack of hw: > > > * Higher res OLED, higher res IPS panels > > > > My suspicion is that OLED vs IPS will require different dtb. I'm > > expecting the OLED to use samsung,atna33xc20 panel driver (see "arm64: > > dts: qcom: x1e80100-yoga: Update panel bindings"), but IPS can > > probably use edp-panel. I'm not sure if anyone has gotten both panels > > working on any other device that has both IPS and OLED variants, so > > this remains a theory. The t14s, which also has both IPS and OLED, > > has different DMI/CHID values for the different SKUs, so DtbLoader > > should be able to pick the correct dtb, once it exists. > > Thanks for the input. > > Will take a look at that driver. I have briefly looked into .inf from > Dell's Windows driver trying to identify them - all three panels have > dell-specific model naming, which unfortunately does not help much. As > far as I found from unofficial sources (1), the particular OLED is LG > made, not Samsung. Ok, if it is not a samsung panel, then maybe panel-edp will work. So far all the OLEDs I've seen are samsung, and they have a different power sequence (hence needing different panel driver) > Luckily, Peter de Kraker (CCed) has reached out to me yesterday as he > got an OLED variant - will test on his machine in the following weeks, > as well as record CHIDs once he is able to boot with a working > display. Sounds rather unscalable though if each variant of laptop > would need a separate dtb? Eg. Dell's Inspiron model supports both > x1e80 and x1e78 (luckily no OLEDs though). If some OEM would release a > model with both displays and SoCs customizable, the number of variants > would grow pretty fast... So far, it is just the samsung panel vs everyone else, where we would need different dtb. Maybe we come up with other variants, we'll see as time goes on, but it shouldn't need to be for _every_ variant. For the panel, edid-decode will tell us the panel name/vendor, ie. something like: cat /sys/devices/platform/soc@0/ae00000.display-subsystem/ae01000.display-controller/drm/card0/card0-eDP-1/edid | edid-decode BR, -R > [1] https://www.thelec.net/news/articleView.html?idxno=4858 > > Alex > > > > > BR, > > -R > > > > > * Touchscreen > > > > > > Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> > > > --- > > > arch/arm64/boot/dts/qcom/Makefile | 1 + > > > .../dts/qcom/x1e80100-dell-tributo-13.dts | 860 ++++++++++++++++++ > > > 2 files changed, 861 insertions(+) > > > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts > > > > > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > > > index ae002c7cf126..111c589d6bae 100644 > > > --- a/arch/arm64/boot/dts/qcom/Makefile > > > +++ b/arch/arm64/boot/dts/qcom/Makefile > > > @@ -271,6 +271,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb > > > +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-tributo-13.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb > > > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb > > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts > > > new file mode 100644 > > > index 000000000000..d387f133c398 > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts > > > @@ -0,0 +1,860 @@ > > > +// SPDX-License-Identifier: BSD-3-Clause > > > +/* > > > + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. > > > + * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@gmail.com> > > > + */ > > > + > > > +/dts-v1/; > > > + > > > +#include <dt-bindings/gpio/gpio.h> > > > +#include <dt-bindings/input/gpio-keys.h> > > > +#include <dt-bindings/input/input.h> > > > +#include <dt-bindings/leds/common.h> > > > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > > > + > > > +#include "x1e80100.dtsi" > > > +#include "x1e80100-pmics.dtsi" > > > + > > > +/ { > > > + model = "Dell XPS 13 9345"; > > > + compatible = "dell,tributo-13", "qcom,x1e80100"; > > > + chassis-type = "laptop"; > > > + > > > + gpio-keys { > > > + compatible = "gpio-keys"; > > > + > > > + pinctrl-0 = <&hall_int_n_default>; > > > + pinctrl-names = "default"; > > > + > > > + switch-lid { > > > + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; > > > + linux,input-type = <EV_SW>; > > > + linux,code = <SW_LID>; > > > + wakeup-source; > > > + wakeup-event-action = <EV_ACT_DEASSERTED>; > > > + }; > > > + }; > > > + > > > + leds { > > > + compatible = "gpio-leds"; > > > + > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&cam_indicator_en>; > > > + > > > + led-camera-indicator { > > > + label = "white:camera-indicator"; > > > + function = LED_FUNCTION_INDICATOR; > > > + color = <LED_COLOR_ID_WHITE>; > > > + gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; > > > + linux,default-trigger = "none"; > > > + default-state = "off"; > > > + /* Reuse as a panic indicator until we get a "camera on" trigger */ > > > + panic-indicator; > > > + }; > > > + }; > > > + > > > + pmic-glink { > > > + compatible = "qcom,x1e80100-pmic-glink", > > > + "qcom,sm8550-pmic-glink", > > > + "qcom,pmic-glink"; > > > + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, > > > + <&tlmm 123 GPIO_ACTIVE_HIGH>; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + /* Right-side USB Type-C port */ > > > + connector@0 { > > > + compatible = "usb-c-connector"; > > > + reg = <0>; > > > + power-role = "dual"; > > > + data-role = "dual"; > > > + > > > + ports { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@0 { > > > + reg = <0>; > > > + > > > + pmic_glink_ss0_hs_in: endpoint { > > > + remote-endpoint = <&usb_1_ss0_dwc3_hs>; > > > + }; > > > + }; > > > + > > > + port@1 { > > > + reg = <1>; > > > + > > > + pmic_glink_ss0_ss_in: endpoint { > > > + remote-endpoint = <&usb_1_ss0_qmpphy_out>; > > > + }; > > > + }; > > > + }; > > > + }; > > > + > > > + /* Left-side USB Type-C port */ > > > + connector@1 { > > > + compatible = "usb-c-connector"; > > > + reg = <1>; > > > + power-role = "dual"; > > > + data-role = "dual"; > > > + > > > + ports { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@0 { > > > + reg = <0>; > > > + > > > + pmic_glink_ss1_hs_in: endpoint { > > > + remote-endpoint = <&usb_1_ss1_dwc3_hs>; > > > + }; > > > + }; > > > + > > > + port@1 { > > > + reg = <1>; > > > + > > > + pmic_glink_ss1_ss_in: endpoint { > > > + remote-endpoint = <&usb_1_ss1_qmpphy_out>; > > > + }; > > > + }; > > > + }; > > > + }; > > > + }; > > > + > > > + reserved-memory { > > > + linux,cma { > > > + compatible = "shared-dma-pool"; > > > + size = <0x0 0x8000000>; > > > + reusable; > > > + linux,cma-default; > > > + }; > > > + }; > > > + > > > + vph_pwr: vph-pwr-regulator { > > > + compatible = "regulator-fixed"; > > > + > > > + regulator-name = "vph_pwr"; > > > + regulator-min-microvolt = <3700000>; > > > + regulator-max-microvolt = <3700000>; > > > + > > > + regulator-always-on; > > > + regulator-boot-on; > > > + }; > > > + > > > + vreg_edp_3p3: regulator-edp-3p3 { > > > + compatible = "regulator-fixed"; > > > + > > > + regulator-name = "VREG_EDP_3P3"; > > > + regulator-min-microvolt = <3300000>; > > > + regulator-max-microvolt = <3300000>; > > > + > > > + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; > > > + enable-active-high; > > > + > > > + pinctrl-0 = <&edp_reg_en>; > > > + pinctrl-names = "default"; > > > + > > > + regulator-boot-on; > > > + }; > > > + > > > + vreg_nvme: regulator-nvme { > > > + compatible = "regulator-fixed"; > > > + > > > + regulator-name = "VREG_NVME_3P3"; > > > + regulator-min-microvolt = <3300000>; > > > + regulator-max-microvolt = <3300000>; > > > + > > > + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; > > > + enable-active-high; > > > + > > > + pinctrl-0 = <&nvme_reg_en>; > > > + pinctrl-names = "default"; > > > + }; > > > +}; > > > + > > > +&apps_rsc { > > > + regulators-0 { > > > + compatible = "qcom,pm8550-rpmh-regulators"; > > > + qcom,pmic-id = "b"; > > > + vdd-bob1-supply = <&vph_pwr>; > > > + vdd-bob2-supply = <&vph_pwr>; > > > + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; > > > + vdd-l2-l13-l14-supply = <&vreg_bob1>; > > > + vdd-l5-l16-supply = <&vreg_bob1>; > > > + vdd-l6-l7-supply = <&vreg_bob2>; > > > + vdd-l8-l9-supply = <&vreg_bob1>; > > > + vdd-l12-supply = <&vreg_s5j_1p2>; > > > + vdd-l15-supply = <&vreg_s4c_1p8>; > > > + vdd-l17-supply = <&vreg_bob2>; > > > + > > > + vreg_bob1: bob1 { > > > + regulator-name = "vreg_bob1"; > > > + regulator-min-microvolt = <3008000>; > > > + regulator-max-microvolt = <3960000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_bob2: bob2 { > > > + regulator-name = "vreg_bob2"; > > > + regulator-min-microvolt = <2504000>; > > > + regulator-max-microvolt = <3008000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l2b_3p0: ldo2 { > > > + regulator-name = "vreg_l2b_3p0"; > > > + regulator-min-microvolt = <3072000>; > > > + regulator-max-microvolt = <3072000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l4b_1p8: ldo4 { > > > + regulator-name = "vreg_l4b_1p8"; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l6b_1p8: ldo6 { > > > + regulator-name = "vreg_l6b_1p8"; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <2960000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l8b_3p0: ldo8 { > > > + regulator-name = "vreg_l8b_3p0"; > > > + regulator-min-microvolt = <3072000>; > > > + regulator-max-microvolt = <3072000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l9b_2p9: ldo9 { > > > + regulator-name = "vreg_l9b_2p9"; > > > + regulator-min-microvolt = <2960000>; > > > + regulator-max-microvolt = <2960000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l12b_1p2: ldo12 { > > > + regulator-name = "vreg_l12b_1p2"; > > > + regulator-min-microvolt = <1200000>; > > > + regulator-max-microvolt = <1200000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l13b_3p0: ldo13 { > > > + regulator-name = "vreg_l13b_3p0"; > > > + regulator-min-microvolt = <3072000>; > > > + regulator-max-microvolt = <3072000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l14b_3p0: ldo14 { > > > + regulator-name = "vreg_l14b_3p0"; > > > + regulator-min-microvolt = <3072000>; > > > + regulator-max-microvolt = <3072000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l15b_1p8: ldo15 { > > > + regulator-name = "vreg_l15b_1p8"; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l17b_2p5: ldo17 { > > > + regulator-name = "vreg_l17b_2p5"; > > > + regulator-min-microvolt = <2504000>; > > > + regulator-max-microvolt = <2504000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > + > > > + regulators-1 { > > > + compatible = "qcom,pm8550ve-rpmh-regulators"; > > > + qcom,pmic-id = "c"; > > > + vdd-l1-supply = <&vreg_s5j_1p2>; > > > + vdd-l2-supply = <&vreg_s1f_0p7>; > > > + vdd-l3-supply = <&vreg_s1f_0p7>; > > > + > > > + vreg_s4c_1p8: smps4 { > > > + regulator-name = "vreg_s4c_1p8"; > > > + regulator-min-microvolt = <1856000>; > > > + regulator-max-microvolt = <2000000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l1c_1p2: ldo1 { > > > + regulator-name = "vreg_l1c_1p2"; > > > + regulator-min-microvolt = <1200000>; > > > + regulator-max-microvolt = <1200000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l2c_0p8: ldo2 { > > > + regulator-name = "vreg_l2c_0p8"; > > > + regulator-min-microvolt = <880000>; > > > + regulator-max-microvolt = <880000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l3c_0p9: ldo3 { > > > + regulator-name = "vreg_l3c_0p9"; > > > + regulator-min-microvolt = <920000>; > > > + regulator-max-microvolt = <920000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > + > > > + regulators-2 { > > > + compatible = "qcom,pmc8380-rpmh-regulators"; > > > + qcom,pmic-id = "d"; > > > + vdd-l1-supply = <&vreg_s1f_0p7>; > > > + vdd-l2-supply = <&vreg_s1f_0p7>; > > > + vdd-l3-supply = <&vreg_s4c_1p8>; > > > + vdd-s1-supply = <&vph_pwr>; > > > + > > > + vreg_l1d_0p8: ldo1 { > > > + regulator-name = "vreg_l1d_0p8"; > > > + regulator-min-microvolt = <880000>; > > > + regulator-max-microvolt = <880000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l2d_0p9: ldo2 { > > > + regulator-name = "vreg_l2d_0p9"; > > > + regulator-min-microvolt = <912000>; > > > + regulator-max-microvolt = <912000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l3d_1p8: ldo3 { > > > + regulator-name = "vreg_l3d_1p8"; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > + > > > + regulators-3 { > > > + compatible = "qcom,pmc8380-rpmh-regulators"; > > > + qcom,pmic-id = "e"; > > > + vdd-l2-supply = <&vreg_s1f_0p7>; > > > + vdd-l3-supply = <&vreg_s5j_1p2>; > > > + > > > + vreg_l2e_0p8: ldo2 { > > > + regulator-name = "vreg_l2e_0p8"; > > > + regulator-min-microvolt = <880000>; > > > + regulator-max-microvolt = <880000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l3e_1p2: ldo3 { > > > + regulator-name = "vreg_l3e_1p2"; > > > + regulator-min-microvolt = <1200000>; > > > + regulator-max-microvolt = <1200000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > + > > > + regulators-4 { > > > + compatible = "qcom,pmc8380-rpmh-regulators"; > > > + qcom,pmic-id = "f"; > > > + vdd-l1-supply = <&vreg_s5j_1p2>; > > > + vdd-l2-supply = <&vreg_s5j_1p2>; > > > + vdd-l3-supply = <&vreg_s5j_1p2>; > > > + vdd-s1-supply = <&vph_pwr>; > > > + > > > + vreg_s1f_0p7: smps1 { > > > + regulator-name = "vreg_s1f_0p7"; > > > + regulator-min-microvolt = <700000>; > > > + regulator-max-microvolt = <1100000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > + > > > + regulators-6 { > > > + compatible = "qcom,pm8550ve-rpmh-regulators"; > > > + qcom,pmic-id = "i"; > > > + vdd-l1-supply = <&vreg_s4c_1p8>; > > > + vdd-l2-supply = <&vreg_s5j_1p2>; > > > + vdd-l3-supply = <&vreg_s1f_0p7>; > > > + vdd-s1-supply = <&vph_pwr>; > > > + vdd-s2-supply = <&vph_pwr>; > > > + > > > + vreg_s1i_0p9: smps1 { > > > + regulator-name = "vreg_s1i_0p9"; > > > + regulator-min-microvolt = <900000>; > > > + regulator-max-microvolt = <920000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_s2i_1p0: smps2 { > > > + regulator-name = "vreg_s2i_1p0"; > > > + regulator-min-microvolt = <1000000>; > > > + regulator-max-microvolt = <1100000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l1i_1p8: ldo1 { > > > + regulator-name = "vreg_l1i_1p8"; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l2i_1p2: ldo2 { > > > + regulator-name = "vreg_l2i_1p2"; > > > + regulator-min-microvolt = <1200000>; > > > + regulator-max-microvolt = <1200000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l3i_0p8: ldo3 { > > > + regulator-name = "vreg_l3i_0p8"; > > > + regulator-min-microvolt = <880000>; > > > + regulator-max-microvolt = <880000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > + > > > + regulators-7 { > > > + compatible = "qcom,pm8550ve-rpmh-regulators"; > > > + qcom,pmic-id = "j"; > > > + vdd-l1-supply = <&vreg_s1f_0p7>; > > > + vdd-l2-supply = <&vreg_s5j_1p2>; > > > + vdd-l3-supply = <&vreg_s1f_0p7>; > > > + vdd-s5-supply = <&vph_pwr>; > > > + > > > + vreg_s5j_1p2: smps5 { > > > + regulator-name = "vreg_s5j_1p2"; > > > + regulator-min-microvolt = <1256000>; > > > + regulator-max-microvolt = <1304000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l1j_0p9: ldo1 { > > > + regulator-name = "vreg_l1j_0p9"; > > > + regulator-min-microvolt = <912000>; > > > + regulator-max-microvolt = <912000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l2j_1p2: ldo2 { > > > + regulator-name = "vreg_l2j_1p2"; > > > + regulator-min-microvolt = <1256000>; > > > + regulator-max-microvolt = <1256000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + > > > + vreg_l3j_0p8: ldo3 { > > > + regulator-name = "vreg_l3j_0p8"; > > > + regulator-min-microvolt = <880000>; > > > + regulator-max-microvolt = <880000>; > > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > + }; > > > + }; > > > +}; > > > + > > > +&pcie4 { > > > + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; > > > + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; > > > + > > > + pinctrl-0 = <&pcie4_default>; > > > + pinctrl-names = "default"; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&pcie4_phy { > > > + vdda-phy-supply = <&vreg_l3i_0p8>; > > > + vdda-pll-supply = <&vreg_l3e_1p2>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&pcie6a { > > > + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; > > > + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; > > > + > > > + vddpe-3v3-supply = <&vreg_nvme>; > > > + > > > + pinctrl-0 = <&pcie6a_default>; > > > + pinctrl-names = "default"; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&pcie6a_phy { > > > + vdda-phy-supply = <&vreg_l1d_0p8>; > > > + vdda-pll-supply = <&vreg_l2j_1p2>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&qupv3_0 { > > > + status = "okay"; > > > +}; > > > + > > > +&qupv3_1 { > > > + status = "okay"; > > > +}; > > > + > > > +&qupv3_2 { > > > + status = "okay"; > > > +}; > > > + > > > +&remoteproc_adsp { > > > + firmware-name = "qcom/x1e80100/dell/tributo/qcadsp8380.mbn", > > > + "qcom/x1e80100/dell/tributo/adsp_dtbs.elf"; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&remoteproc_cdsp { > > > + firmware-name = "qcom/x1e80100/dell/tributo/qccdsp8380.mbn", > > > + "qcom/x1e80100/dell/tributo/cdsp_dtbs.elf"; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&gpu { > > > + status = "okay"; > > > + > > > + zap-shader { > > > + firmware-name = "qcom/x1e80100/dell/tributo/qcdxkmsuc8380.mbn"; > > > + }; > > > +}; > > > + > > > +&mdss { > > > + status = "okay"; > > > +}; > > > + > > > +&mdss_dp3 { > > > + compatible = "qcom,x1e80100-dp"; > > > + /delete-property/ #sound-dai-cells; > > > + > > > + status = "okay"; > > > + > > > + aux-bus { > > > + panel { > > > + /* 1920x1200 IPS panel is SHP1593, PNP09FF compatible */ > > > + compatible = "edp-panel"; > > > + power-supply = <&vreg_edp_3p3>; > > > + > > > + port { > > > + edp_panel_in: endpoint { > > > + remote-endpoint = <&mdss_dp3_out>; > > > + }; > > > + }; > > > + }; > > > + }; > > > + > > > + ports { > > > + port@1 { > > > + reg = <1>; > > > + > > > + mdss_dp3_out: endpoint { > > > + data-lanes = <0 1 2 3>; > > > + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; > > > + > > > + remote-endpoint = <&edp_panel_in>; > > > + }; > > > + }; > > > + }; > > > +}; > > > + > > > +&mdss_dp3_phy { > > > + vdda-phy-supply = <&vreg_l3j_0p8>; > > > + vdda-pll-supply = <&vreg_l2j_1p2>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&i2c0 { > > > + clock-frequency = <400000>; > > > + status = "okay"; > > > + > > > + keyboard@5 { > > > + compatible = "hid-over-i2c"; > > > + reg = <0x5>; > > > + > > > + hid-descr-addr = <0x20>; > > > + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; > > > + > > > + pinctrl-0 = <&kybd_default>; > > > + pinctrl-names = "default"; > > > + > > > + wakeup-source; > > > + }; > > > +}; > > > + > > > +&i2c3 { > > > + clock-frequency = <400000>; > > > + status = "disabled"; > > > + /* PS8830 Retimer @0x8 */ > > > + /* Unknown device @0x9 */ > > > +}; > > > + > > > +&i2c5 { > > > + clock-frequency = <100000>; > > > + status = "disabled"; > > > + /* Unknown device @0x3b */ > > > +}; > > > + > > > +&i2c7 { > > > + clock-frequency = <400000>; > > > + status = "disabled"; > > > + /* PS8830 Retimer @0x8 */ > > > + /* Unknown device @0x9 */ > > > +}; > > > + > > > +&i2c8 { > > > + clock-frequency = <400000>; > > > + > > > + status = "okay"; > > > + > > > + touchscreen@0 { > > > + compatible = "hid-over-i2c"; > > > + reg = <0x0>; > > > + > > > + hid-descr-addr = <0x1>; > > > + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; > > > + > > > + pinctrl-0 = <&ts0_default>; > > > + pinctrl-names = "default"; > > > + }; > > > +}; > > > + > > > +&i2c9 { > > > + clock-frequency = <400000>; > > > + status = "disabled"; > > > + /* USB3 retimer device @0x4f */ > > > +}; > > > + > > > +&i2c17 { > > > + clock-frequency = <400000>; > > > + status = "okay"; > > > + > > > + touchpad@2c { > > > + compatible = "hid-over-i2c"; > > > + reg = <0x2c>; > > > + > > > + hid-descr-addr = <0x20>; > > > + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; > > > + > > > + pinctrl-0 = <&tpad_default>; > > > + pinctrl-names = "default"; > > > + > > > + wakeup-source; > > > + }; > > > +}; > > > + > > > +&smb2360_0_eusb2_repeater { > > > + vdd18-supply = <&vreg_l3d_1p8>; > > > + vdd3-supply = <&vreg_l2b_3p0>; > > > +}; > > > + > > > +&smb2360_1_eusb2_repeater { > > > + vdd18-supply = <&vreg_l3d_1p8>; > > > + vdd3-supply = <&vreg_l14b_3p0>; > > > +}; > > > + > > > +&tlmm { > > > + gpio-reserved-ranges = <44 4>, /* SPI11 (TPM) */ > > > + <76 4>, /* SPI19 (TZ Protected) */ > > > + <238 1>; /* UFS Reset */ > > > + > > > + edp_reg_en: edp-reg-en-state { > > > + pins = "gpio70"; > > > + function = "gpio"; > > > + drive-strength = <16>; > > > + bias-disable; > > > + }; > > > + > > > + kybd_default: kybd-default-state { > > > + pins = "gpio67"; > > > + function = "gpio"; > > > + bias-pull-up; > > > + }; > > > + > > > + nvme_reg_en: nvme-reg-en-state { > > > + pins = "gpio18"; > > > + function = "gpio"; > > > + drive-strength = <2>; > > > + bias-disable; > > > + }; > > > + > > > + tpad_default: tpad-default-state { > > > + disable-pins { > > > + pins = "gpio38"; > > > + function = "gpio"; > > > + output-high; > > > + }; > > > + > > > + int-n-pins { > > > + pins = "gpio3"; > > > + function = "gpio"; > > > + bias-pull-up; > > > + }; > > > + > > > + reset-n-pins { > > > + pins = "gpio52"; > > > + function = "gpio"; > > > + bias-disable; > > > + }; > > > + }; > > > + > > > + ts0_default: ts0-default-state { > > > + disable-pins { > > > + pins = "gpio75"; > > > + function = "gpio"; > > > + output-high; > > > + }; > > > + > > > + int-n-pins { > > > + pins = "gpio51"; > > > + function = "gpio"; > > > + bias-pull-up; > > > + }; > > > + > > > + reset-n-pins { > > > + /* Technically should be High-Z input */ > > > + pins = "gpio48"; > > > + function = "gpio"; > > > + output-low; > > > + drive-strength = <2>; > > > + }; > > > + }; > > > + > > > + hall_int_n_default: hall-int-n-state { > > > + pins = "gpio92"; > > > + function = "gpio"; > > > + > > > + bias-disable; > > > + }; > > > + > > > + pcie4_default: pcie4-default-state { > > > + clkreq-n-pins { > > > + pins = "gpio147"; > > > + function = "pcie4_clk"; > > > + drive-strength = <2>; > > > + bias-pull-up; > > > + }; > > > + > > > + perst-n-pins { > > > + pins = "gpio146"; > > > + function = "gpio"; > > > + drive-strength = <2>; > > > + bias-disable; > > > + }; > > > + > > > + wake-n-pins { > > > + pins = "gpio148"; > > > + function = "gpio"; > > > + drive-strength = <2>; > > > + bias-pull-up; > > > + }; > > > + }; > > > + > > > + pcie6a_default: pcie6a-default-state { > > > + clkreq-n-pins { > > > + pins = "gpio153"; > > > + function = "pcie6a_clk"; > > > + drive-strength = <2>; > > > + bias-pull-up; > > > + }; > > > + > > > + perst-n-pins { > > > + pins = "gpio152"; > > > + function = "gpio"; > > > + drive-strength = <2>; > > > + bias-disable; > > > + }; > > > + > > > + wake-n-pins { > > > + pins = "gpio154"; > > > + function = "gpio"; > > > + drive-strength = <2>; > > > + bias-pull-up; > > > + }; > > > + }; > > > + > > > + cam_indicator_en: cam-indicator-en-state { > > > + pins = "gpio110"; > > > + function = "gpio"; > > > + drive-strength = <2>; > > > + bias-disable; > > > + }; > > > +}; > > > + > > > +&uart21 { > > > + compatible = "qcom,geni-debug-uart"; > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss0_hsphy { > > > + vdd-supply = <&vreg_l3j_0p8>; > > > + vdda12-supply = <&vreg_l2j_1p2>; > > > + > > > + phys = <&smb2360_0_eusb2_repeater>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss0_qmpphy { > > > + vdda-phy-supply = <&vreg_l3e_1p2>; > > > + vdda-pll-supply = <&vreg_l1j_0p9>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss0 { > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss0_dwc3 { > > > + dr_mode = "host"; > > > +}; > > > + > > > +&usb_1_ss0_dwc3_hs { > > > + remote-endpoint = <&pmic_glink_ss0_hs_in>; > > > +}; > > > + > > > +&usb_1_ss0_qmpphy_out { > > > + remote-endpoint = <&pmic_glink_ss0_ss_in>; > > > +}; > > > + > > > +&usb_1_ss1_hsphy { > > > + vdd-supply = <&vreg_l3j_0p8>; > > > + vdda12-supply = <&vreg_l2j_1p2>; > > > + > > > + phys = <&smb2360_1_eusb2_repeater>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss1_qmpphy { > > > + vdda-phy-supply = <&vreg_l3e_1p2>; > > > + vdda-pll-supply = <&vreg_l2d_0p9>; > > > + > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss1 { > > > + status = "okay"; > > > +}; > > > + > > > +&usb_1_ss1_dwc3 { > > > + dr_mode = "host"; > > > +}; > > > + > > > +&usb_1_ss1_dwc3_hs { > > > + remote-endpoint = <&pmic_glink_ss1_hs_in>; > > > +}; > > > + > > > +&usb_1_ss1_qmpphy_out { > > > + remote-endpoint = <&pmic_glink_ss1_ss_in>; > > > +}; > > > -- > > > 2.43.0 > > > > > >
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index ae002c7cf126..111c589d6bae 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -271,6 +271,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-tributo-13.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts new file mode 100644 index 000000000000..d387f133c398 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts @@ -0,0 +1,860 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" + +/ { + model = "Dell XPS 13 9345"; + compatible = "dell,tributo-13", "qcom,x1e80100"; + chassis-type = "laptop"; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&cam_indicator_en>; + + led-camera-indicator { + label = "white:camera-indicator"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + /* Reuse as a panic indicator until we get a "camera on" trigger */ + panic-indicator; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + /* Right-side USB Type-C port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + }; + }; + + /* Left-side USB Type-C port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p9: ldo1 { + regulator-name = "vreg_l1j_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/dell/tributo/qcadsp8380.mbn", + "qcom/x1e80100/dell/tributo/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/dell/tributo/qccdsp8380.mbn", + "qcom/x1e80100/dell/tributo/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/x1e80100/dell/tributo/qcdxkmsuc8380.mbn"; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + /* 1920x1200 IPS panel is SHP1593, PNP09FF compatible */ + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + keyboard@5 { + compatible = "hid-over-i2c"; + reg = <0x5>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + status = "disabled"; + /* PS8830 Retimer @0x8 */ + /* Unknown device @0x9 */ +}; + +&i2c5 { + clock-frequency = <100000>; + status = "disabled"; + /* Unknown device @0x3b */ +}; + +&i2c7 { + clock-frequency = <400000>; + status = "disabled"; + /* PS8830 Retimer @0x8 */ + /* Unknown device @0x9 */ +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + touchscreen@0 { + compatible = "hid-over-i2c"; + reg = <0x0>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; +}; + +&i2c9 { + clock-frequency = <400000>; + status = "disabled"; + /* USB3 retimer device @0x4f */ +}; + +&i2c17 { + clock-frequency = <400000>; + status = "okay"; + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&tlmm { + gpio-reserved-ranges = <44 4>, /* SPI11 (TPM) */ + <76 4>, /* SPI19 (TZ Protected) */ + <238 1>; /* UFS Reset */ + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-pull-up; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tpad_default: tpad-default-state { + disable-pins { + pins = "gpio38"; + function = "gpio"; + output-high; + }; + + int-n-pins { + pins = "gpio3"; + function = "gpio"; + bias-pull-up; + }; + + reset-n-pins { + pins = "gpio52"; + function = "gpio"; + bias-disable; + }; + }; + + ts0_default: ts0-default-state { + disable-pins { + pins = "gpio75"; + function = "gpio"; + output-high; + }; + + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-pull-up; + }; + + reset-n-pins { + /* Technically should be High-Z input */ + pins = "gpio48"; + function = "gpio"; + output-low; + drive-strength = <2>; + }; + }; + + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + + bias-disable; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + cam_indicator_en: cam-indicator-en-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart21 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p9>; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; +};
Initial support for Dell XPS 9345 13" 2024 (Tributo) based on X1E80100. Working: * Touchpad * Keyboard (only post suspend&resume, i2c-hid patch WIP) * eDP, with brightness control * NVME * USB Type-C ports in USB2/USB3 (one orientation) * WiFi * GPU/aDSP/cDSP firmware loading (requires binaries from Windows) * Lid switch * Sleep/suspend, nothing visibly broken on resume Not working: * Speakers (WIP, pin guessing, x4 WSA8845) * Microphones (WIP, pin guessing) * Fingerprint Reader (WIP, USB MP with ptn3222) * USB as DP/USB3 (WIP, PS8830 based) * Camera * Battery Info Should be working, but cannot be tested due to lack of hw: * Higher res OLED, higher res IPS panels * Touchscreen Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../dts/qcom/x1e80100-dell-tributo-13.dts | 860 ++++++++++++++++++ 2 files changed, 861 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts