| Message ID | 20240930213008.159647-1-andreas@kemnade.info |
|---|---|
| Headers | show |
| Series | ARM: dts: omap: omap4-epson-embt2ws: misc gpio definitions | expand |
On Mon, 30 Sep 2024 23:30:04 +0200, Andreas Kemnade wrote: > Bring the system into a more defined state and do not rely > on things being initialized by bootloader. > > Andreas Kemnade (4): > ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators > ARM: dts: omap: omap4-epson-embt2ws: wire up regulators > ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs > ARM: dts: omap: omap4-epson-embt2ws: add GPIO expander > > .../boot/dts/ti/omap/omap4-epson-embt2ws.dts | 175 +++++++++++++++++- > 1 file changed, 171 insertions(+), 4 deletions(-) > > -- > 2.39.5 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y ti/omap/omap4-epson-embt2ws.dtb' for 20240930213008.159647-1-andreas@kemnade.info: arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dtb: serial@0: {'compatible': ['ti,omap4-uart'], 'reg': [[0, 256]], 'interrupts': [[0, 74, 4]], 'clock-frequency': 48000000, 'pinctrl-names': ['default'], 'pinctrl-0': [[115]], 'interrupts-extended': [[1, 0, 74, 4], [116, 260]], '$nodename': ['serial@0']} is valid under each of {'required': ['interrupts-extended']}, {'required': ['interrupts']} from schema $id: http://devicetree.org/schemas/serial/8250_omap.yaml# arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dtb: serial@0: {'compatible': ['ti,omap4-uart'], 'reg': [[0, 256]], 'interrupts': [[0, 73, 4]], 'clock-frequency': 48000000, 'pinctrl-names': ['default'], 'pinctrl-0': [[118, 119]], 'interrupts-extended': [[1, 0, 73, 4], [116, 220]], 'bluetooth-gnss': {'compatible': ['ti,wl1283-st'], 'enable-gpios': [[120, 25, 0]], 'clocks': [[121, 1]], 'clock-names': ['ext_clock']}, '$nodename': ['serial@0']} is valid under each of {'required': ['interrupts-extended']}, {'required': ['interrupts']} from schema $id: http://devicetree.org/schemas/serial/8250_omap.yaml#