diff mbox series

[05/16] soc: renesas: sysc: Move RZ/G3S SoC detection on SYSC driver

Message ID 20240822152801.602318-6-claudiu.beznea.uj@bp.renesas.com
State New
Headers show
Series Add initial USB support for the Renesas RZ/G3S SoC | expand

Commit Message

Claudiu Beznea Aug. 22, 2024, 3:27 p.m. UTC
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Now that we have a driver for SYSC driver for RZ/G3S move the SoC detection
for RZ/G3S in SYSC driver.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
 drivers/soc/renesas/renesas-soc.c | 12 ---------
 drivers/soc/renesas/rzg3s-sysc.c  | 45 +++++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+), 12 deletions(-)

Comments

Geert Uytterhoeven Oct. 8, 2024, 1:23 p.m. UTC | #1
Hi Claudiu,

On Thu, Aug 22, 2024 at 5:28 PM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Now that we have a driver for SYSC driver for RZ/G3S move the SoC detection
> for RZ/G3S in SYSC driver.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Thanks for your patch!

> --- a/drivers/soc/renesas/rzg3s-sysc.c
> +++ b/drivers/soc/renesas/rzg3s-sysc.c
> @@ -85,6 +97,39 @@ static int rzg3s_sysc_probe(struct platform_device *pdev)
>         sysc->dev = dev;
>         spin_lock_init(&sysc->lock);
>
> +       compatible = of_get_property(dev->of_node, "compatible", NULL);
> +       if (!compatible)
> +               return -ENODEV;

Please use of_match_device() and of_device_id.compatible instead.

> +
> +       soc_id_start = strchr(compatible, ',') + 1;
> +       soc_id_end = strchr(compatible, '-');
> +       size = soc_id_end - soc_id_start;
> +       if (size > 32)
> +               size = 32;
> +       strscpy(soc_id, soc_id_start, size);
> +
> +       soc_dev_attr = devm_kzalloc(dev, sizeof(*soc_dev_attr), GFP_KERNEL);
> +       if (!soc_dev_attr)
> +               return -ENOMEM;
> +
> +       soc_dev_attr->family = "RZ/G3S";
> +       soc_dev_attr->soc_id = devm_kstrdup(dev, soc_id, GFP_KERNEL);
> +       if (!soc_dev_attr->soc_id)
> +               return -ENOMEM;
> +
> +       devid = readl(sysc->base + RZG3S_SYS_LSI_DEVID);
> +       revision = FIELD_GET(RZG3S_SYS_LSI_DEVID_REV, devid);
> +       soc_dev_attr->revision = devm_kasprintf(dev, GFP_KERNEL, "%u", revision);
> +       if (!soc_dev_attr->revision)
> +               return -ENOMEM;
> +
> +       dev_info(dev, "Detected Renesas %s %s Rev %s\n", soc_dev_attr->family,
> +                soc_dev_attr->soc_id, soc_dev_attr->revision);
> +
> +       soc_dev = soc_device_register(soc_dev_attr);
> +       if (IS_ERR(soc_dev))
> +               return PTR_ERR(soc_dev);
> +
>         return rzg3s_sysc_reset_probe(sysc, "reset", 0);
>  }

My first thought was "oh no, now this is handled/duplicated in two
places", but if you later migrate the chip identification support for
the rest of RZ/G2L devices to here, it may start to look better ;-)

One caveat is that soc_device_match() can be called quite early in
the boot process, hence renesas_soc_init() is an early_initcall().
So registering the soc_device from a platform_driver might be too late,
especially since fw_devlinks won't help you in this particular case.
However, I think all real early calls to soc_device_match() are gone
since the removal of the support for R-Car H3 ES1.x, and all remaining
calls impact only R-Car and RZ/Gx (not G2L) SoCs.

Gr{oetje,eeting}s,

                        Geert
Claudiu Beznea Oct. 9, 2024, 8:26 a.m. UTC | #2
Hi, Geert,

On 08.10.2024 16:23, Geert Uytterhoeven wrote:
> Hi Claudiu,
> 
> On Thu, Aug 22, 2024 at 5:28 PM Claudiu <claudiu.beznea@tuxon.dev> wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>
>> Now that we have a driver for SYSC driver for RZ/G3S move the SoC detection
>> for RZ/G3S in SYSC driver.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> Thanks for your patch!
> 
>> --- a/drivers/soc/renesas/rzg3s-sysc.c
>> +++ b/drivers/soc/renesas/rzg3s-sysc.c
>> @@ -85,6 +97,39 @@ static int rzg3s_sysc_probe(struct platform_device *pdev)
>>         sysc->dev = dev;
>>         spin_lock_init(&sysc->lock);
>>
>> +       compatible = of_get_property(dev->of_node, "compatible", NULL);
>> +       if (!compatible)
>> +               return -ENODEV;
> 
> Please use of_match_device() and of_device_id.compatible instead.

OK.

> 
>> +
>> +       soc_id_start = strchr(compatible, ',') + 1;
>> +       soc_id_end = strchr(compatible, '-');
>> +       size = soc_id_end - soc_id_start;
>> +       if (size > 32)
>> +               size = 32;
>> +       strscpy(soc_id, soc_id_start, size);
>> +
>> +       soc_dev_attr = devm_kzalloc(dev, sizeof(*soc_dev_attr), GFP_KERNEL);
>> +       if (!soc_dev_attr)
>> +               return -ENOMEM;
>> +
>> +       soc_dev_attr->family = "RZ/G3S";
>> +       soc_dev_attr->soc_id = devm_kstrdup(dev, soc_id, GFP_KERNEL);
>> +       if (!soc_dev_attr->soc_id)
>> +               return -ENOMEM;
>> +
>> +       devid = readl(sysc->base + RZG3S_SYS_LSI_DEVID);
>> +       revision = FIELD_GET(RZG3S_SYS_LSI_DEVID_REV, devid);
>> +       soc_dev_attr->revision = devm_kasprintf(dev, GFP_KERNEL, "%u", revision);
>> +       if (!soc_dev_attr->revision)
>> +               return -ENOMEM;
>> +
>> +       dev_info(dev, "Detected Renesas %s %s Rev %s\n", soc_dev_attr->family,
>> +                soc_dev_attr->soc_id, soc_dev_attr->revision);
>> +
>> +       soc_dev = soc_device_register(soc_dev_attr);
>> +       if (IS_ERR(soc_dev))
>> +               return PTR_ERR(soc_dev);
>> +
>>         return rzg3s_sysc_reset_probe(sysc, "reset", 0);
>>  }
> 
> My first thought was "oh no, now this is handled/duplicated in two
> places", but if you later migrate the chip identification support for
> the rest of RZ/G2L devices to here, it may start to look better ;-)

Yes, this is how I see it going forward.

> 
> One caveat is that soc_device_match() can be called quite early in
> the boot process, hence renesas_soc_init() is an early_initcall().
> So registering the soc_device from a platform_driver might be too late,
> especially since fw_devlinks won't help you in this particular case.
> However, I think all real early calls to soc_device_match() are gone
> since the removal of the support for R-Car H3 ES1.x, and all remaining
> calls impact only R-Car and RZ/Gx (not G2L) SoCs.

That is good to know. I get that we should be safe going forward with this
approach.

Thank you,
Claudiu Beznea

> 
> Gr{oetje,eeting}s,
> 
>                         Geert
>
diff mbox series

Patch

diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 172d59e6fbcf..425d9037dcd0 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -71,10 +71,6 @@  static const struct renesas_family fam_rzg2ul __initconst __maybe_unused = {
 	.name	= "RZ/G2UL",
 };
 
-static const struct renesas_family fam_rzg3s __initconst __maybe_unused = {
-	.name	= "RZ/G3S",
-};
-
 static const struct renesas_family fam_rzv2h __initconst __maybe_unused = {
 	.name	= "RZ/V2H",
 };
@@ -176,11 +172,6 @@  static const struct renesas_soc soc_rz_g2ul __initconst __maybe_unused = {
 	.id     = 0x8450447,
 };
 
-static const struct renesas_soc soc_rz_g3s __initconst __maybe_unused = {
-	.family = &fam_rzg3s,
-	.id	= 0x85e0447,
-};
-
 static const struct renesas_soc soc_rz_v2h __initconst __maybe_unused = {
 	.family = &fam_rzv2h,
 	.id     = 0x847a447,
@@ -410,9 +401,6 @@  static const struct of_device_id renesas_socs[] __initconst __maybe_unused = {
 #ifdef CONFIG_ARCH_R9A07G054
 	{ .compatible = "renesas,r9a07g054",	.data = &soc_rz_v2l },
 #endif
-#ifdef CONFIG_ARCH_R9A08G045
-	{ .compatible = "renesas,r9a08g045",	.data = &soc_rz_g3s },
-#endif
 #ifdef CONFIG_ARCH_R9A09G011
 	{ .compatible = "renesas,r9a09g011",	.data = &soc_rz_v2m },
 #endif
diff --git a/drivers/soc/renesas/rzg3s-sysc.c b/drivers/soc/renesas/rzg3s-sysc.c
index e664d29ce5c3..1dd48c7255d1 100644
--- a/drivers/soc/renesas/rzg3s-sysc.c
+++ b/drivers/soc/renesas/rzg3s-sysc.c
@@ -6,10 +6,16 @@ 
  */
 
 #include <linux/auxiliary_bus.h>
+#include <linux/io.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/sys_soc.h>
 
 #include <linux/soc/renesas/rzg3s-sysc-reset.h>
 
+#define RZG3S_SYS_LSI_DEVID		0xa04
+#define RZG3S_SYS_LSI_DEVID_REV		GENMASK(31, 28)
+
 /**
  * struct rzg3s_sysc - SYSC private data structure
  * @base: base address
@@ -71,8 +77,14 @@  static int rzg3s_sysc_reset_probe(struct rzg3s_sysc *sysc, const char *adev_name
 
 static int rzg3s_sysc_probe(struct platform_device *pdev)
 {
+	const char *soc_id_start, *soc_id_end, *compatible;
+	struct soc_device_attribute *soc_dev_attr;
 	struct device *dev = &pdev->dev;
+	struct soc_device *soc_dev;
 	struct rzg3s_sysc *sysc;
+	char soc_id[32] = {0};
+	u32 devid, revision;
+	u8 size;
 
 	sysc = devm_kzalloc(dev, sizeof(*sysc), GFP_KERNEL);
 	if (!sysc)
@@ -85,6 +97,39 @@  static int rzg3s_sysc_probe(struct platform_device *pdev)
 	sysc->dev = dev;
 	spin_lock_init(&sysc->lock);
 
+	compatible = of_get_property(dev->of_node, "compatible", NULL);
+	if (!compatible)
+		return -ENODEV;
+
+	soc_id_start = strchr(compatible, ',') + 1;
+	soc_id_end = strchr(compatible, '-');
+	size = soc_id_end - soc_id_start;
+	if (size > 32)
+		size = 32;
+	strscpy(soc_id, soc_id_start, size);
+
+	soc_dev_attr = devm_kzalloc(dev, sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->family = "RZ/G3S";
+	soc_dev_attr->soc_id = devm_kstrdup(dev, soc_id, GFP_KERNEL);
+	if (!soc_dev_attr->soc_id)
+		return -ENOMEM;
+
+	devid = readl(sysc->base + RZG3S_SYS_LSI_DEVID);
+	revision = FIELD_GET(RZG3S_SYS_LSI_DEVID_REV, devid);
+	soc_dev_attr->revision = devm_kasprintf(dev, GFP_KERNEL, "%u", revision);
+	if (!soc_dev_attr->revision)
+		return -ENOMEM;
+
+	dev_info(dev, "Detected Renesas %s %s Rev %s\n", soc_dev_attr->family,
+		 soc_dev_attr->soc_id, soc_dev_attr->revision);
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev))
+		return PTR_ERR(soc_dev);
+
 	return rzg3s_sysc_reset_probe(sysc, "reset", 0);
 }