diff mbox series

[v2,-next] i2c: qcom-cci: Remove the unused variable cci_clk_rate

Message ID 20241029020931.42311-1-jiapeng.chong@linux.alibaba.com
State Accepted
Commit b88c79699d72caa947ecaae85839b3563662ccce
Headers show
Series [v2,-next] i2c: qcom-cci: Remove the unused variable cci_clk_rate | expand

Commit Message

Jiapeng Chong Oct. 29, 2024, 2:09 a.m. UTC
Variable ret is not effectively used, so delete it.

drivers/i2c/busses/i2c-qcom-cci.c:526:16: warning: variable ‘cci_clk_rate’ set but not used.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11532
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
---
Changes in v2:
  -Remove redundant code.

 drivers/i2c/busses/i2c-qcom-cci.c | 9 ---------
 1 file changed, 9 deletions(-)

Comments

Vladimir Zapolskiy Oct. 30, 2024, 10:53 a.m. UTC | #1
On 10/29/24 04:09, Jiapeng Chong wrote:
> Variable ret is not effectively used, so delete it.

Variable ret is not deleted, the commit message is misleading.

> drivers/i2c/busses/i2c-qcom-cci.c:526:16: warning: variable ‘cci_clk_rate’ set but not used.
> 
> Reported-by: Abaci Robot <abaci@linux.alibaba.com>
> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11532
> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>

With the needed change to the commit message:

Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>

--
Best wishes,
Vladimir
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c
index 5cc791b3b57d..a0ef43e99751 100644
--- a/drivers/i2c/busses/i2c-qcom-cci.c
+++ b/drivers/i2c/busses/i2c-qcom-cci.c
@@ -523,7 +523,6 @@  static const struct dev_pm_ops qcom_cci_pm = {
 static int cci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	unsigned long cci_clk_rate = 0;
 	struct device_node *child;
 	struct resource *r;
 	struct cci *cci;
@@ -594,14 +593,6 @@  static int cci_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, -EINVAL, "not enough clocks in DT\n");
 	cci->nclocks = ret;
 
-	/* Retrieve CCI clock rate */
-	for (i = 0; i < cci->nclocks; i++) {
-		if (!strcmp(cci->clocks[i].id, "cci")) {
-			cci_clk_rate = clk_get_rate(cci->clocks[i].clk);
-			break;
-		}
-	}
-
 	ret = cci_enable_clocks(cci);
 	if (ret < 0)
 		return ret;