| Message ID | 20241114155759.1155567-1-romain.naour@smile.fr |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ARM: dts: dra7: Add bus_dma_limit for l4 cfg bus | expand |
On 14/11/2024 17:57, Romain Naour wrote: > From: Romain Naour <romain.naour@skf.com> > > A bus_dma_limit was added for l3 bus by commit cfb5d65f2595 > ("ARM: dts: dra7: Add bus_dma_limit for L3 bus") to fix an issue > observed only with SATA on DRA7-EVM with 4GB RAM and CONFIG_ARM_LPAE > enabled. > > Since kernel 5.13, the SATA issue can be reproduced again following > the SATA node move from L3 bus to L4_cfg in commit 8af15365a368 > ("ARM: dts: Configure interconnect target module for dra7 sata"). > > Fix it by adding an empty dma-ranges property to l4_cfg and > segment@100000 nodes (parent device tree node of SATA controller) to > inherit the 2GB dma ranges limit from l3 bus node. > > Note: A similar fix was applied for PCIe controller by commit > 90d4d3f4ea45 ("ARM: dts: dra7: Fix bus_dma_limit for PCIe"). > > Fixes: 8af15365a368 ("ARM: dts: Configure interconnect target module for dra7 sata"). > Link: https://lore.kernel.org/linux-omap/c583e1bb-f56b-4489-8012-ce742e85f233@smile.fr/ Please add the stable tag here Cc: <stable@vger.kernel.org> # 5.13 > Signed-off-by: Romain Naour <romain.naour@skf.com> > ---
Hello Roger, Le 15/11/2024 à 10:20, Roger Quadros a écrit : > > > On 14/11/2024 17:57, Romain Naour wrote: >> From: Romain Naour <romain.naour@skf.com> >> >> A bus_dma_limit was added for l3 bus by commit cfb5d65f2595 >> ("ARM: dts: dra7: Add bus_dma_limit for L3 bus") to fix an issue >> observed only with SATA on DRA7-EVM with 4GB RAM and CONFIG_ARM_LPAE >> enabled. >> >> Since kernel 5.13, the SATA issue can be reproduced again following >> the SATA node move from L3 bus to L4_cfg in commit 8af15365a368 >> ("ARM: dts: Configure interconnect target module for dra7 sata"). >> >> Fix it by adding an empty dma-ranges property to l4_cfg and >> segment@100000 nodes (parent device tree node of SATA controller) to >> inherit the 2GB dma ranges limit from l3 bus node. >> >> Note: A similar fix was applied for PCIe controller by commit >> 90d4d3f4ea45 ("ARM: dts: dra7: Fix bus_dma_limit for PCIe"). >> >> Fixes: 8af15365a368 ("ARM: dts: Configure interconnect target module for dra7 sata"). >> Link: https://lore.kernel.org/linux-omap/c583e1bb-f56b-4489-8012-ce742e85f233@smile.fr/ > > Please add the stable tag here > > Cc: <stable@vger.kernel.org> # 5.13 checkpatch.pl was complaining about "Cc: <stable@vger.kernel.org>" I tried yesterday. Now it fine with "# 5.13" tag. Thanks! Best regards, Romain > >> Signed-off-by: Romain Naour <romain.naour@skf.com> >> --- >
diff --git a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi index 6e67d99832ac..ba7fdaae9c6e 100644 --- a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi @@ -12,6 +12,7 @@ &l4_cfg { /* 0x4a000000 */ ranges = <0x00000000 0x4a000000 0x100000>, /* segment 0 */ <0x00100000 0x4a100000 0x100000>, /* segment 1 */ <0x00200000 0x4a200000 0x100000>; /* segment 2 */ + dma-ranges; segment@0 { /* 0x4a000000 */ compatible = "simple-pm-bus"; @@ -557,6 +558,7 @@ segment@100000 { /* 0x4a100000 */ <0x0007e000 0x0017e000 0x001000>, /* ap 124 */ <0x00059000 0x00159000 0x001000>, /* ap 125 */ <0x0005a000 0x0015a000 0x001000>; /* ap 126 */ + dma-ranges; target-module@2000 { /* 0x4a102000, ap 27 3c.0 */ compatible = "ti,sysc";