Message ID | 20241209-starqltechn_integration_upstream-v11-3-dc0598828e01@gmail.com |
---|---|
State | Superseded |
Headers | show |
Series | Add support for Maxim Integrated MAX77705 PMIC | expand |
On Mon, 09 Dec 2024 14:26:27 +0300, Dzmitry Sankouski wrote: > Move max17042 common binding part to separate file, to > reuse it for MFDs with platform driver version. > > Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> > --- > Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml | 49 +------------------------------------------------ > MAINTAINERS | 2 +- > 3 files changed, 68 insertions(+), 49 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/power/supply/maxim,max17042.example.dtb: battery@36: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/power/supply/maxim,max17042-base.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241209-starqltechn_integration_upstream-v11-3-dc0598828e01@gmail.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Mon, Dec 09, 2024 at 02:26:27PM +0300, Dzmitry Sankouski wrote: > Move max17042 common binding part to separate file, to > reuse it for MFDs with platform driver version. > > Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> > --- > Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml | 49 +------------------------------------------------ > MAINTAINERS | 2 +- > 3 files changed, 68 insertions(+), 49 deletions(-) > > diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml > new file mode 100644 > index 000000000000..1653f8ae11f7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml > @@ -0,0 +1,66 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/power/supply/maxim,max17042-base.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Maxim 17042 fuel gauge series > + > +maintainers: > + - Sebastian Reichel <sre@kernel.org> > + > +allOf: > + - $ref: power-supply.yaml# > + > +properties: > + compatible: > + enum: > + - maxim,max17042 > + - maxim,max17047 > + - maxim,max17050 > + - maxim,max17055 > + - maxim,max77705-battery > + - maxim,max77849-battery Shared schemas define only shared properties, not compatibles. But the main problem is you did not answer nor resolve my previous concerns - either this device has separate address and probably is a separate device on the same or different bus. Plus this was not tested and does not really work, but anyway let's focus on my previous concerns first. > + > + interrupts: > + maxItems: 1 > + description: | > + The ALRT pin, an open-drain interrupt. ... > + > +additionalProperties: false > + > diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml > index 14242de7fc08..b7fd714cc72e 100644 > --- a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml > +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml > @@ -10,60 +10,13 @@ maintainers: > - Sebastian Reichel <sre@kernel.org> > > allOf: > - - $ref: power-supply.yaml# > + - $ref: maxim,max17042-base.yaml# > > properties: > - compatible: > - enum: > - - maxim,max17042 > - - maxim,max17047 > - - maxim,max17050 > - - maxim,max17055 > - - maxim,max77705-battery > - - maxim,max77849-battery > - This does not make sense. Final device schema must come with compatibles. Best regards, Krzysztof
вт, 10 дек. 2024 г. в 10:38, Krzysztof Kozlowski <krzk@kernel.org>: > > On Mon, Dec 09, 2024 at 02:26:27PM +0300, Dzmitry Sankouski wrote: > > Move max17042 common binding part to separate file, to > > reuse it for MFDs with platform driver version. > > > > Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> > > --- > > Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml | 49 +------------------------------------------------ > > MAINTAINERS | 2 +- > > 3 files changed, 68 insertions(+), 49 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml > > new file mode 100644 > > index 000000000000..1653f8ae11f7 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml > > @@ -0,0 +1,66 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/power/supply/maxim,max17042-base.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Maxim 17042 fuel gauge series > > + > > +maintainers: > > + - Sebastian Reichel <sre@kernel.org> > > + > > +allOf: > > + - $ref: power-supply.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + - maxim,max17042 > > + - maxim,max17047 > > + - maxim,max17050 > > + - maxim,max17055 > > + - maxim,max77705-battery > > + - maxim,max77849-battery > > Shared schemas define only shared properties, not compatibles. But the > main problem is you did not answer nor resolve my previous concerns - > either this device has separate address and probably is a separate > device on the same or different bus. > > Plus this was not tested and does not really work, but anyway let's > focus on my previous concerns first. > Ah, indeed, the device tree in this and previous patches doesn't reflect hardware wiring. MAX77705 fuel gauge has a separate i2c address, i.e. I may move it out of the MAX77705 MFD node. However, the device on that address has additional features, like measuring system and input current, which is out of fuel gauge responsibility. So I guess I should create another MFD for fuel gauge, i. e. max77705 example would look like: ... pmic@66 { compatible = "maxim,max77705"; ... }; meter@36 { compatible = "maxim,max77705-meter"; // max17042 fuel gauge driver in platform mode fuel-gauge { power-supplies = <&max77705_charger>; maxim,rsns-microohm = <5000>; interrupt-parent = <&pm8998_gpios>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml new file mode 100644 index 000000000000..1653f8ae11f7 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max17042-base.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim 17042 fuel gauge series + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - maxim,max17042 + - maxim,max17047 + - maxim,max17050 + - maxim,max17055 + - maxim,max77705-battery + - maxim,max77849-battery + + interrupts: + maxItems: 1 + description: | + The ALRT pin, an open-drain interrupt. + + maxim,rsns-microohm: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000). + Defining this property enables current-sense functionality. + + maxim,cold-temp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Temperature threshold to report battery as cold (in tenths of degree Celsius). + Default is not to report cold events. + + maxim,over-heat-temp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Temperature threshold to report battery as over heated (in tenths of degree Celsius). + Default is not to report over heating events. + + maxim,dead-volt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Voltage threshold to report battery as dead (in mV). + Default is not to report dead battery events. + + maxim,over-volt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Voltage threshold to report battery as over voltage (in mV). + Default is not to report over-voltage events. + + power-supplies: true + +required: + - compatible + +additionalProperties: false + diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml index 14242de7fc08..b7fd714cc72e 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml @@ -10,60 +10,13 @@ maintainers: - Sebastian Reichel <sre@kernel.org> allOf: - - $ref: power-supply.yaml# + - $ref: maxim,max17042-base.yaml# properties: - compatible: - enum: - - maxim,max17042 - - maxim,max17047 - - maxim,max17050 - - maxim,max17055 - - maxim,max77705-battery - - maxim,max77849-battery - reg: maxItems: 1 - interrupts: - maxItems: 1 - description: | - The ALRT pin, an open-drain interrupt. - - maxim,rsns-microohm: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000). - Defining this property enables current-sense functionality. - - maxim,cold-temp: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - Temperature threshold to report battery as cold (in tenths of degree Celsius). - Default is not to report cold events. - - maxim,over-heat-temp: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - Temperature threshold to report battery as over heated (in tenths of degree Celsius). - Default is not to report over heating events. - - maxim,dead-volt: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - Voltage threshold to report battery as dead (in mV). - Default is not to report dead battery events. - - maxim,over-volt: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - Voltage threshold to report battery as over voltage (in mV). - Default is not to report over-voltage events. - - power-supplies: true - required: - - compatible - reg additionalProperties: false diff --git a/MAINTAINERS b/MAINTAINERS index 7700208f6ccf..cd5532afbfe4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14157,7 +14157,7 @@ R: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> R: Purism Kernel Team <kernel@puri.sm> L: linux-pm@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml +F: Documentation/devicetree/bindings/power/supply/maxim,max17042*.yaml F: drivers/power/supply/max17042_battery.c MAXIM MAX20086 CAMERA POWER PROTECTOR DRIVER
Move max17042 common binding part to separate file, to reuse it for MFDs with platform driver version. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> --- Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml | 49 +------------------------------------------------ MAINTAINERS | 2 +- 3 files changed, 68 insertions(+), 49 deletions(-)