mbox series

[v10,0/7] Add TSENS support for IPQ5332, IPQ5424

Message ID 20241219062839.747986-1-quic_mmanikan@quicinc.com
Headers show
Series Add TSENS support for IPQ5332, IPQ5424 | expand

Message

Manikanta Mylavarapu Dec. 19, 2024, 6:28 a.m. UTC 
IPQ5332 uses tsens v2.3.3 IP with combined interrupt for
upper/lower and critical. IPQ5332 does not have RPM and
kernel has to take care of TSENS enablement and calibration.

IPQ5424 also uses same tsens v2.3.3 IP and it's similar to IPQ5332
(no RPM) hence add IPQ5424 support in this series itself.

This patch series adds the temperature sensor enablement,
calibration support for IPQ5332 and IPQ5424.

Changes in V10:
	- Fixed all review comments from Konrad Dybico,Christophe
	  JAILLET
	- Detailed change logs are added to the respective patches

V9 can be found at:
https://lore.kernel.org/linux-arm-msm/20241125050728.3699241-1-quic_mmanikan@quicinc.com/

V8 can be found at:
https://lore.kernel.org/linux-arm-msm/20241115103957.1157495-1-quic_mmanikan@quicinc.com/

V7 can be found at:
https://lore.kernel.org/linux-arm-msm/20241107140550.3260859-1-quic_mmanikan@quicinc.com/

V6 can be found at:
https://lore.kernel.org/linux-arm-msm/20241104124413.2012794-1-quic_mmanikan@quicinc.com/

V5 can be found at:
https://lore.kernel.org/linux-arm-msm/20230721054619.2366510-1-quic_ipkumar@quicinc.com/

V4 can be found at:
https://lore.kernel.org/linux-arm-msm/20230719104041.126718-1-quic_ipkumar@quicinc.com/

V3 can be found at:
https://lore.kernel.org/linux-arm-msm/20230713052732.787853-1-quic_ipkumar@quicinc.com/

V2 can be found at:
https://lore.kernel.org/linux-arm-msm/20230712113539.4029941-1-quic_ipkumar@quicinc.com/

Manikanta Mylavarapu (3):
  dt-bindings: nvmem: Add compatible for IPQ5424
  arm64: dts: qcom: ipq5424: Add tsens node
  arm64: dts: qcom: ipq5424: Add thermal zone nodes

Praveenkumar I (4):
  dt-bindings: thermal: tsens: Add ipq5332, ipq5424 compatible
  thermal/drivers/tsens: Add TSENS enable and calibration support for V2
  arm64: dts: qcom: ipq5332: Add tsens node
  arm64: dts: qcom: ipq5332: Add thermal zone nodes

 .../bindings/nvmem/qcom,qfprom.yaml           |   1 +
 .../bindings/thermal/qcom-tsens.yaml          |  18 ++
 arch/arm64/boot/dts/qcom/ipq5332.dtsi         | 135 ++++++++++++
 arch/arm64/boot/dts/qcom/ipq5424.dtsi         | 201 ++++++++++++++++++
 drivers/thermal/qcom/tsens-v2.c               | 178 ++++++++++++++++
 drivers/thermal/qcom/tsens.c                  |   8 +-
 drivers/thermal/qcom/tsens.h                  |   3 +
 7 files changed, 543 insertions(+), 1 deletion(-)


base-commit: 7fa366f1b6e376c38966faa42da7f0f2e013fdab

Comments

Srinivas Kandagatla Dec. 20, 2024, 5 p.m. UTC | #1 
On Thu, 19 Dec 2024 11:58:32 +0530, Manikanta Mylavarapu wrote:
> IPQ5332 uses tsens v2.3.3 IP with combined interrupt for
> upper/lower and critical. IPQ5332 does not have RPM and
> kernel has to take care of TSENS enablement and calibration.
> 
> IPQ5424 also uses same tsens v2.3.3 IP and it's similar to IPQ5332
> (no RPM) hence add IPQ5424 support in this series itself.
> 
> [...]

Applied, thanks!

[2/7] dt-bindings: nvmem: Add compatible for IPQ5424
      commit: e976eb4479e967cb6dc86b6e46554648a3b8f37b

Best regards,