| Message ID | 20250122101424.1810844-1-quic_nkumarsi@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v3] arm64: dts: qcom: Add industrial mezzanine support for qcs6490-rb3gen2 | expand |
On 1/23/2025 12:16 AM, Dmitry Baryshkov wrote: > On Wed, Jan 22, 2025 at 03:44:24PM +0530, Nirmesh Kumar Singh wrote: >> Add DTS support for Qualcomm qcs6490-rb3gen2 industrial mezzanine board. >> >> Signed-off-by: Sahil Chandna <quic_chandna@quicinc.com> >> Signed-off-by: Nirmesh Kumar Singh <quic_nkumarsi@quicinc.com> >> >> --- >> Changes in v3: >> - Fixed tpm pinctrl node label. >> - Addressed comments by Dmitry. > Which ones? Pleas be more specific in changelogs. Ack > >> - Improved indentation/formatting. >> - Link to V2: https://lore.kernel.org/all/20250102190155.2593453-1-quic_nkumarsi@quicinc.com/ >> >> Changes in V2: >> - Addressed comment by Konrad. >> - Validated dts bindings with dtb_checks suggested by Krzysztof. >> - Improved indentation/formatting. >> - Fixed bug encountered during testing. >> - Added dtb entry in makefile. >> - Link to V1: https://lore.kernel.org/all/20241206065156.2573-1-quic_chandna@quicinc.com/ >> --- >> arch/arm64/boot/dts/qcom/Makefile | 4 +++ >> .../qcs6490-rb3gen2-industrial-mezzanine.dtso | 35 +++++++++++++++++++ >> 2 files changed, 39 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index 6ca8db4b8afe..16ac008c58d2 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -111,6 +111,10 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb >> + >> +qcs6490-rb3gen2-industrial-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-industrial-mezzanine.dtbo >> + >> +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-industrial-mezzanine.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb >> dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb >> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso >> new file mode 100644 >> index 000000000000..1498f32bd069 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso >> @@ -0,0 +1,35 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) 2025, Qualcomm Innovation Center, Inc. All rights reserved. >> +*/ >> + >> +/dts-v1/; >> +/plugin/; >> +#include <dt-bindings/clock/qcom,gcc-sc7280.h> >> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> >> + >> +&pm7250b_gpios { >> + tpm_spi_reset: tpm-spi-reset-state { >> + pins = "gpio5"; >> + function = "normal"; >> + power-source = <1>; >> + output-high; >> + input-disable; >> + bias-pull-up; >> + qcom,drive-strength = <3>; >> + }; >> +}; >> + >> +&spi11 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "okay"; >> + >> + st33htpm0: tpm@0 { >> + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; >> + reg = <0>; >> + spi-max-frequency = <20000000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&tpm_spi_reset>; > Missing reset-gpios property. Otherwise there is no point in specifying > the pinctrl. The community previously rejected the GPIO reset function in the TPM driver (tpm_tis_core.c). You can refer to the discussion [1]. From what I understand from the discussion in the patch, this decision was made to prevent software from executing an incorrect reset sequence, which could potentially reset the PCR banks of TPM chip. However, a pinctrl node is necessary to ensure the PMIC GPIO is in the correct state as required by the TPM chip. [1] https://lore.kernel.org/lkml/20220407111849.5676-1-LinoSanfilippo@gmx.de/T/#m726d477dbce48c9e345e245f93d60f0aaa6f0994 Thanks, Nirmesh > >> + }; >> +}; >> -- >> 2.34.1 >>
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6ca8db4b8afe..16ac008c58d2 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -111,6 +111,10 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb + +qcs6490-rb3gen2-industrial-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-industrial-mezzanine.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-industrial-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso new file mode 100644 index 000000000000..1498f32bd069 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, Qualcomm Innovation Center, Inc. All rights reserved. +*/ + +/dts-v1/; +/plugin/; +#include <dt-bindings/clock/qcom,gcc-sc7280.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +&pm7250b_gpios { + tpm_spi_reset: tpm-spi-reset-state { + pins = "gpio5"; + function = "normal"; + power-source = <1>; + output-high; + input-disable; + bias-pull-up; + qcom,drive-strength = <3>; + }; +}; + +&spi11 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + st33htpm0: tpm@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <20000000>; + pinctrl-names = "default"; + pinctrl-0 = <&tpm_spi_reset>; + }; +};