diff mbox series

[v4,4/6] arm64: dts: qcom: Add initial support for MSM8937

Message ID 20250315-msm8937-v4-4-1f132e870a49@mainlining.org
State New
Headers show
Series Initial support of MSM8937 and Xiaomi Redmi 3S | expand

Commit Message

Barnabás Czémán March 15, 2025, 2:57 p.m. UTC
From: Dang Huynh <danct12@riseup.net>

Add initial support for MSM8937 SoC.

Signed-off-by: Dang Huynh <danct12@riseup.net>
Co-developed-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 arch/arm64/boot/dts/qcom/msm8937.dtsi | 2149 +++++++++++++++++++++++++++++++++
 1 file changed, 2149 insertions(+)

Comments

Konrad Dybcio April 14, 2025, 8:55 p.m. UTC | #1
On 3/15/25 3:57 PM, Barnabás Czémán wrote:
> From: Dang Huynh <danct12@riseup.net>
> 
> Add initial support for MSM8937 SoC.
> 
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> Co-developed-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---

[...]

> +			power-domains = <&cpu_pd0>;
> +			power-domain-names = "psci";

So CPU4-7 get "nicer" idle, but 0-3 don't?

[...]

> +		cpu-map {
> +			/* The MSM8937 has 2 cluster A53 setup. */

This comment seems superfluous

[...]

> +	timer {

'p' < 't', please sort top-level nodes alphabetically

[...]

> +				wcss-wlan2-pins {
> +					pins = "gpio76";
> +					function = "wcss_wlan2";
> +					drive-strength = <6>;

please unify this order (drive-strength before bias)

> +					bias-pull-up;
> +
> +				};

Extra newline

[...]

> +		gpu: gpu@1c00000 {
> +			compatible = "qcom,adreno-505.0", "qcom,adreno";
> +			reg = <0x1c00000 0x40000>;
> +			reg-names = "kgsl_3d0_reg_memory";
> +			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "kgsl_3d0_irq";
> +			#cooling-cells = <2>;
> +			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
> +				<&gcc GCC_OXILI_AHB_CLK>,
> +				<&gcc GCC_BIMC_GFX_CLK>,
> +				<&gcc GCC_BIMC_GPU_CLK>,
> +				<&gcc GCC_OXILI_TIMER_CLK>,
> +				<&gcc GCC_OXILI_AON_CLK>;

Please align the <s

> +			clock-names = "core",
> +				      "iface",
> +				      "mem_iface",
> +				      "alt_mem_iface",
> +				      "rbbmtimer",
> +				      "alwayson";
> +			operating-points-v2 = <&gpu_opp_table>;
> +			power-domains = <&gcc OXILI_GX_GDSC>;
> +
> +			iommus = <&adreno_smmu 0>;
> +
> +			status = "disabled";
> +
> +			gpu_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-19200000 {
> +					opp-hz = /bits/ 64 <19200000>;
> +					opp-supported-hw = <0xFF>;

0xff is overly broad, please document the existing known speed bins

[...]

> +		adreno_smmu: iommu@1c40000 {
> +			compatible = "qcom,msm8996-smmu-v2",
> +				     "qcom,adreno-smmu",
> +				     "qcom,smmu-v2";
> +			reg = <0x1c40000 0x10000>;

Does it work as-is, without iommu changes?

[...]

> +	thermal_zones: thermal-zones {
> +		aoss-thermal {
> +			polling-delay-passive = <250>;

There are no passive trip points> +
> +			thermal-sensors = <&tsens 0>;
> +
> +			trips {
> +				aoss_alert0: trip-point0 {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "hot";
> +				};

Please convert these to 'critical' instead

[...]

> +		cpuss1-thermal {
> +			polling-delay-passive = <250>;

You can drop polling-delay-passive under CPU tzones, as threshold
crossing is interrupt-driven

> +
> +			thermal-sensors = <&tsens 4>;
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpuss1_alert0>;
> +					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +
> +			trips {
> +				cpuss1_alert0: trip-point0 {
> +					temperature = <75000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpuss1_alert1: trip-point1 {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "hot";
> +				};

On newer platforms we rely on LMH to shut down the device if it
were to reach the junction temperature, but let's leave them here
as probably no one remembers for sure how reliable that is on these
older platforms and you're most likely not willing to test that

Konrad
Barnabás Czémán April 16, 2025, 8:33 p.m. UTC | #2
On 2025-04-14 22:55, Konrad Dybcio wrote:
> On 3/15/25 3:57 PM, Barnabás Czémán wrote:
>> From: Dang Huynh <danct12@riseup.net>
>> 
>> Add initial support for MSM8937 SoC.
>> 
>> Signed-off-by: Dang Huynh <danct12@riseup.net>
>> Co-developed-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
>> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
>> ---
> 
> [...]
> 
>> +			power-domains = <&cpu_pd0>;
>> +			power-domain-names = "psci";
> 
> So CPU4-7 get "nicer" idle, but 0-3 don't?
I am not sure, i will check.
> 
> [...]
> 
>> +		cpu-map {
>> +			/* The MSM8937 has 2 cluster A53 setup. */
> 
> This comment seems superfluous
> 
> [...]
> 
>> +	timer {
> 
> 'p' < 't', please sort top-level nodes alphabetically
> 
> [...]
> 
>> +				wcss-wlan2-pins {
>> +					pins = "gpio76";
>> +					function = "wcss_wlan2";
>> +					drive-strength = <6>;
> 
> please unify this order (drive-strength before bias)
> 
>> +					bias-pull-up;
>> +
>> +				};
> 
> Extra newline
> 
> [...]
> 
>> +		gpu: gpu@1c00000 {
>> +			compatible = "qcom,adreno-505.0", "qcom,adreno";
>> +			reg = <0x1c00000 0x40000>;
>> +			reg-names = "kgsl_3d0_reg_memory";
>> +			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "kgsl_3d0_irq";
>> +			#cooling-cells = <2>;
>> +			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
>> +				<&gcc GCC_OXILI_AHB_CLK>,
>> +				<&gcc GCC_BIMC_GFX_CLK>,
>> +				<&gcc GCC_BIMC_GPU_CLK>,
>> +				<&gcc GCC_OXILI_TIMER_CLK>,
>> +				<&gcc GCC_OXILI_AON_CLK>;
> 
> Please align the <s
> 
>> +			clock-names = "core",
>> +				      "iface",
>> +				      "mem_iface",
>> +				      "alt_mem_iface",
>> +				      "rbbmtimer",
>> +				      "alwayson";
>> +			operating-points-v2 = <&gpu_opp_table>;
>> +			power-domains = <&gcc OXILI_GX_GDSC>;
>> +
>> +			iommus = <&adreno_smmu 0>;
>> +
>> +			status = "disabled";
>> +
>> +			gpu_opp_table: opp-table {
>> +				compatible = "operating-points-v2";
>> +
>> +				opp-19200000 {
>> +					opp-hz = /bits/ 64 <19200000>;
>> +					opp-supported-hw = <0xFF>;
> 
> 0xff is overly broad, please document the existing known speed bins
> 
> [...]
> 
>> +		adreno_smmu: iommu@1c40000 {
>> +			compatible = "qcom,msm8996-smmu-v2",
>> +				     "qcom,adreno-smmu",
>> +				     "qcom,smmu-v2";
>> +			reg = <0x1c40000 0x10000>;
> 
> Does it work as-is, without iommu changes?
Yes
> 
> [...]
> 
>> +	thermal_zones: thermal-zones {
>> +		aoss-thermal {
>> +			polling-delay-passive = <250>;
> 
> There are no passive trip points> +
Should i remove polling-delay-passive?
>> +			thermal-sensors = <&tsens 0>;
>> +
>> +			trips {
>> +				aoss_alert0: trip-point0 {
>> +					temperature = <85000>;
>> +					hysteresis = <2000>;
>> +					type = "hot";
>> +				};
> 
> Please convert these to 'critical' instead
> 
> [...]
> 
>> +		cpuss1-thermal {
>> +			polling-delay-passive = <250>;
> 
> You can drop polling-delay-passive under CPU tzones, as threshold
> crossing is interrupt-driven
Should I remove polling-delay-passive then?
> 
>> +
>> +			thermal-sensors = <&tsens 4>;
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&cpuss1_alert0>;
>> +					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>> +
>> +			trips {
>> +				cpuss1_alert0: trip-point0 {
>> +					temperature = <75000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				cpuss1_alert1: trip-point1 {
>> +					temperature = <85000>;
>> +					hysteresis = <2000>;
>> +					type = "hot";
>> +				};
> 
> On newer platforms we rely on LMH to shut down the device if it
> were to reach the junction temperature, but let's leave them here
> as probably no one remembers for sure how reliable that is on these
> older platforms and you're most likely not willing to test that
> 
> Konrad
Barnabás Czémán April 17, 2025, 6:20 a.m. UTC | #3
On 2025-04-14 22:55, Konrad Dybcio wrote:
> On 3/15/25 3:57 PM, Barnabás Czémán wrote:
>> From: Dang Huynh <danct12@riseup.net>
>> 
>> Add initial support for MSM8937 SoC.
>> 
>> Signed-off-by: Dang Huynh <danct12@riseup.net>
>> Co-developed-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
>> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
>> ---
> 
> [...]
> 
>> +			power-domains = <&cpu_pd0>;
>> +			power-domain-names = "psci";
> 
> So CPU4-7 get "nicer" idle, but 0-3 don't?
> 
> [...]
> 
>> +		cpu-map {
>> +			/* The MSM8937 has 2 cluster A53 setup. */
> 
> This comment seems superfluous
> 
> [...]
> 
>> +	timer {
> 
> 'p' < 't', please sort top-level nodes alphabetically
> 
> [...]
> 
>> +				wcss-wlan2-pins {
>> +					pins = "gpio76";
>> +					function = "wcss_wlan2";
>> +					drive-strength = <6>;
> 
> please unify this order (drive-strength before bias)
> 
>> +					bias-pull-up;
>> +
>> +				};
> 
> Extra newline
> 
> [...]
> 
>> +		gpu: gpu@1c00000 {
>> +			compatible = "qcom,adreno-505.0", "qcom,adreno";
>> +			reg = <0x1c00000 0x40000>;
>> +			reg-names = "kgsl_3d0_reg_memory";
>> +			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "kgsl_3d0_irq";
>> +			#cooling-cells = <2>;
>> +			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
>> +				<&gcc GCC_OXILI_AHB_CLK>,
>> +				<&gcc GCC_BIMC_GFX_CLK>,
>> +				<&gcc GCC_BIMC_GPU_CLK>,
>> +				<&gcc GCC_OXILI_TIMER_CLK>,
>> +				<&gcc GCC_OXILI_AON_CLK>;
> 
> Please align the <s
> 
>> +			clock-names = "core",
>> +				      "iface",
>> +				      "mem_iface",
>> +				      "alt_mem_iface",
>> +				      "rbbmtimer",
>> +				      "alwayson";
>> +			operating-points-v2 = <&gpu_opp_table>;
>> +			power-domains = <&gcc OXILI_GX_GDSC>;
>> +
>> +			iommus = <&adreno_smmu 0>;
>> +
>> +			status = "disabled";
>> +
>> +			gpu_opp_table: opp-table {
>> +				compatible = "operating-points-v2";
>> +
>> +				opp-19200000 {
>> +					opp-hz = /bits/ 64 <19200000>;
>> +					opp-supported-hw = <0xFF>;
> 
> 0xff is overly broad, please document the existing known speed bins
There are no speedbins for 8937 gpu. 8940 have but 8940 is not scope of 
this series.
> 
> [...]
> 
>> +		adreno_smmu: iommu@1c40000 {
>> +			compatible = "qcom,msm8996-smmu-v2",
>> +				     "qcom,adreno-smmu",
>> +				     "qcom,smmu-v2";
>> +			reg = <0x1c40000 0x10000>;
> 
> Does it work as-is, without iommu changes?
> 
> [...]
> 
>> +	thermal_zones: thermal-zones {
>> +		aoss-thermal {
>> +			polling-delay-passive = <250>;
> 
> There are no passive trip points> +
>> +			thermal-sensors = <&tsens 0>;
>> +
>> +			trips {
>> +				aoss_alert0: trip-point0 {
>> +					temperature = <85000>;
>> +					hysteresis = <2000>;
>> +					type = "hot";
>> +				};
> 
> Please convert these to 'critical' instead
> 
> [...]
> 
>> +		cpuss1-thermal {
>> +			polling-delay-passive = <250>;
> 
> You can drop polling-delay-passive under CPU tzones, as threshold
> crossing is interrupt-driven
> 
>> +
>> +			thermal-sensors = <&tsens 4>;
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&cpuss1_alert0>;
>> +					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>> +
>> +			trips {
>> +				cpuss1_alert0: trip-point0 {
>> +					temperature = <75000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				cpuss1_alert1: trip-point1 {
>> +					temperature = <85000>;
>> +					hysteresis = <2000>;
>> +					type = "hot";
>> +				};
> 
> On newer platforms we rely on LMH to shut down the device if it
> were to reach the junction temperature, but let's leave them here
> as probably no one remembers for sure how reliable that is on these
> older platforms and you're most likely not willing to test that
> 
> Konrad
Konrad Dybcio April 17, 2025, 11:11 a.m. UTC | #4
On 4/17/25 8:20 AM, barnabas.czeman@mainlining.org wrote:
> On 2025-04-14 22:55, Konrad Dybcio wrote:
>> On 3/15/25 3:57 PM, Barnabás Czémán wrote:
>>> From: Dang Huynh <danct12@riseup.net>
>>>
>>> Add initial support for MSM8937 SoC.
>>>
>>> Signed-off-by: Dang Huynh <danct12@riseup.net>
>>> Co-developed-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
>>> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
>>> ---

[...]

>> 0xff is overly broad, please document the existing known speed bins
> There are no speedbins for 8937 gpu. 8940 have but 8940 is not scope of this series.

So it would make sense to either drop them, or fill in the actual
values here

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8937.dtsi b/arch/arm64/boot/dts/qcom/msm8937.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..b3db2ed771daa2c6a35b1dbdb74d8a03d432067d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8937.dtsi
@@ -0,0 +1,2149 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-msm8917.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>;
+				cache-unified;
+			};
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x100000>;
+				cache-unified;
+			};
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+		};
+
+		cpu-map {
+			/* The MSM8937 has 2 cluster A53 setup. */
+			/* Little Cores */
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			/* Big Cores */
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "standalone-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <125>;
+				exit-latency-us = <180>;
+				min-residency-us = <595>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			cluster_sleep_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000053>;
+				entry-latency-us = <700>;
+				exit-latency-us = <1000>;
+				min-residency-us = <6500>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8916", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@80000000 {
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		qseecom_mem: reserved@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		reserved@86400000 {
+			reg = <0x0 0x86400000 0x0 0x400000>;
+			no-map;
+		};
+
+		rmtfs@92100000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x92100000 0x0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		adsp_mem: adsp {
+			size = <0x0 0x1100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		mba_mem: mba {
+			size = <0x0 0x100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		wcnss_mem: wcnss {
+			size = <0x0 0x700000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		venus_mem: venus {
+			size = <0x0 0x400000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+	};
+
+	cpu_opp_table_c0: opp-table-c0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+		};
+
+		opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+		};
+	};
+
+	cpu_opp_table_c1: opp-table-c1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+		};
+
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+		};
+
+		opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cluster_pd: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_0>;
+		};
+
+		cpu_pd0: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd1: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd2: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd3: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8937-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs1 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8937", "qcom,smd-rpm";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8937", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8937-rpmpd", "qcom,msm8917-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mboxes = <0>, <&apcs1 13>, <0>, <&apcs1 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0xffffffff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		rng@e3000 {
+			compatible = "qcom,prng";
+			reg = <0xe3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,msm8937-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@1d8 {
+				reg = <0x1d8 1>;
+				bits = <0 8>;
+			};
+
+			tsens_s5_p1: s5-p1@1d9 {
+				reg = <0x1d9 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p2: s5-p2@1d9 {
+				reg = <0x1d9 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@1da {
+				reg = <0x1da 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s6_p2: s6-p2@1db {
+				reg = <0x1db 1>;
+				bits = <2 6>;
+			};
+
+			tsens_s7_p1: s7-p1@1dc {
+				reg = <0x1dc 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@1dc {
+				reg = <0x1dc 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p1: s8-p1@1dd {
+				reg = <0x1dd 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s8_p2: s8-p2@1de {
+				reg = <0x1de 1>;
+				bits = <2 6>;
+			};
+
+			tsens_base2: base2@1df {
+				reg = <0x1df 1>;
+				bits = <0 8>;
+			};
+
+			tsens_mode: mode@210 {
+				reg = <0x210 1>;
+				bits = <0 3>;
+			};
+
+			tsens_s0_p1: s0-p1@210 {
+				reg = <0x210 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s0_p2: s0-p2@211 {
+				reg = <0x211 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@211 {
+				reg = <0x211 2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@212 {
+				reg = <0x212 2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@213 {
+				reg = <0x213 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@214 {
+				reg = <0x214 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@214 {
+				reg = <0x214 2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@215 {
+				reg = <0x215 2>;
+				bits = <5 6>;
+			};
+
+			tsens_s4_p1: s4-p1@216 {
+				reg = <0x216 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s4_p2: s4-p2@217 {
+				reg = <0x217 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s9_p1: s9-p1@230 {
+				reg = <0x230 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p2: s9-p2@230 {
+				reg = <0x230 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s10_p1: s10-p1@231 {
+				reg = <0x231 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s10_p2: s10-p2@232 {
+				reg = <0x232 1>;
+				bits = <2 6>;
+			};
+		};
+
+		usb_hs_phy: phy@6c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x6c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc GCC_QUSB2_PHY_BCR>,
+				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8937-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2";
+			#qcom,sensors = <11>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8917-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 134>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_default: blsp2-i2c1-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_spi3_default: blsp1-spi3-default-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "blsp_spi3";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			blsp1_spi3_sleep: blsp1-spi3-sleep-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp2_spi2_default: blsp2-spi2-default-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			blsp2_spi2_sleep: blsp2-spi2-sleep-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp1_uart1_default: blsp1-uart1-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart1_sleep: blsp1-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				sdc2_cmd_default: cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <16>;
+				};
+
+				sdc2_data_default: data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <16>;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			wcnss_pin_a: wcnss-active-state {
+				wcss-wlan-pins {
+					pins = "gpio79", "gpio80";
+					function = "wcss_wlan";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan0-pins {
+					pins = "gpio78";
+					function = "wcss_wlan0";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan1-pins {
+					pins = "gpio77";
+					function = "wcss_wlan1";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan2-pins {
+					pins = "gpio76";
+					function = "wcss_wlan2";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8937";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8937", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x1040>;
+			reg-names = "mdss_phys", "vbif_phys";
+			ranges;
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8937-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 0x15>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x01a94000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi0_phy>;
+
+				operating-points-v2 = <&mdss_dsi0_opp_table>;
+				power-domains = <&rpmpd MSM8917_VDDCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a94400 {
+				compatible = "qcom,dsi-phy-28nm-8937";
+				reg = <0x01a94a00 0xd4>,
+				      <0x01a94400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@1a96000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x01a96000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
+						  <&gcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE1_CLK>,
+					 <&gcc GCC_MDSS_PCLK1_CLK>,
+					 <&gcc GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi1_phy>;
+
+				operating-points-v2 = <&mdss_dsi1_opp_table>;
+				power-domains = <&rpmpd MSM8917_VDDCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@1a96a00 {
+				compatible = "qcom,dsi-phy-28nm-8937";
+				reg = <0x01a96a00 0xd4>,
+				      <0x01a96400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-505.0", "qcom,adreno";
+			reg = <0x1c00000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			#cooling-cells = <2>;
+			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
+				<&gcc GCC_OXILI_AHB_CLK>,
+				<&gcc GCC_BIMC_GFX_CLK>,
+				<&gcc GCC_BIMC_GPU_CLK>,
+				<&gcc GCC_OXILI_TIMER_CLK>,
+				<&gcc GCC_OXILI_AON_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "rbbmtimer",
+				      "alwayson";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&gcc OXILI_GX_GDSC>;
+
+			iommus = <&adreno_smmu 0>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					opp-supported-hw = <0xFF>;
+					required-opps = <&rpmpd_opp_min_svs>;
+				};
+
+				opp-216000000 {
+					opp-hz = /bits/ 64 <216000000>;
+					opp-supported-hw = <0xFF>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					opp-supported-hw = <0xFF>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+
+				opp-375000000 {
+					opp-hz = /bits/ 64 <375000000>;
+					opp-supported-hw = <0xFF>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-supported-hw = <0xFF>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+				};
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+					opp-supported-hw = <0xFF>;
+					required-opps = <&rpmpd_opp_turbo>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@1c40000 {
+			compatible = "qcom,msm8996-smmu-v2",
+				     "qcom,adreno-smmu",
+				     "qcom,smmu-v2";
+			reg = <0x1c40000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+
+			clocks = <&gcc GCC_BIMC_GFX_CLK>, <&gcc GCC_OXILI_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&gcc OXILI_CX_GDSC>;
+		};
+
+		apps_iommu: iommu@1e20000 {
+			compatible = "qcom,msm8937-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01e20000 0x20000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			#address-cells = <1>;
+			#iommu-cells = <1>;
+			#size-cells = <1>;
+
+			/* VFE */
+			iommu-ctx@14000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x14000 0x1000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x15000 0x1000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x16000 0x1000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x500>, <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default", "sleep";
+			power-domains = <&rpmpd MSM8917_VDDCX>;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x500>, <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc2_default>;
+			pinctrl-1 = <&sdc2_sleep>;
+			pinctrl-names = "default", "sleep";
+			power-domains = <&rpmpd MSM8917_VDDCX>;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <12>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_spi3_default>;
+			pinctrl-1 = <&blsp1_spi3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			pinctrl-1 = <&blsp1_i2c4_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1d000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <10>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_i2c1: i2c@7af5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi2: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp2_spi2_default>;
+			pinctrl-1 = <&blsp2_spi2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@78db000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078db000 0x200>,
+			      <0x078db200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>,
+			      <0x0a202000 0x1000>,
+			      <0x0a21b000 0x3000>;
+			reg-names = "ccu",
+				    "dxe",
+				    "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			power-domains = <&rpmpd MSM8917_VDDCX>,
+					<&rpmpd MSM8917_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-0 = <&wcnss_pin_a>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs1 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>,
+			      <0x0b002000 0x1000>;
+		};
+
+		apcs1: mailbox@b011000 {
+			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@b121000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mdm-core-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				mdm_core_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				q6_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 4>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpuss1_alert0>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss1_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss1_crit: cpuss1-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 5>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 6>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 7>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 8>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 9>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpuss0_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss0_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss0_crit: cpuss0-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 10>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu_alert: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+